Networking And Gateways :: Oracle Forms 6i Call Form Via Static IP?
Sep 6, 2011
I had a query related to call_form function in forms 6i.How can I call a particular form via static ip(outside LAN),but the actual forms are stored in a server called "MAIN_SERVER" which resides in internal LAN domain.That is I have stored location of all my forms path(fmx)in my database table called "FORMS_LOCATION" in the MAIN_SERVER system under the directory "FORMS".From here only users can call all the forms by call_form function.To understand see the example below,
In the table FORMS_LOCATION,there is a column call "forms_path" which holds the value like,
In application the call_form just uses the column "forms_path" to call the form.like CALL_FORM("forms_path",no_hide) this statement will call the form from the main_server.
Here 1.MAIN_SERVER is the name of the server system where forms fmx is actually stored under the folder name "FORMS".When the users access the particular form the call_form function call the form from the MAIN_SERVER.Now there are no problem inside the LAN.Incase if I access the database and call the form outside LAN via internet through STATIC IP what happened was database was connected but call_form function failed and not calling the form because which does not know the MAIN_SERVER/FORMS/ path.
Because my user want to access the form outside lan via internet,so I tried replacing the above statement like //192.54.67.98/FORMS/EMPLOYEE.FMX' with static ip in the prefix instead of local server called MAIN_SERVER.But its not working again.How can I do this?.
I have created two database one for production and another one for test.I created both database in shared_server mode(by using dbca),after than I did not change anything.My problem is when i connect to test database from outside lan through static ip its working well,but when i connect to production database which is not connected. I checked and compared two databases,then I find there are some changes in dispatcher and mts_ dispatcher parameters.And I used this query to check the shared_server status,
ie.select * from v$shared_server,
the output of this query is attached with this post.
I need to fire the KEY-DUPREC trigger as I click on the key combination Shift+P therefore; I added the following line of code in the frmweb.res file.
80 : 1 : "Shift+P" : 64 : "Duplicate Record"
It worked iff no error was raised. So, if I have a raise form trigger failure in the KEY-DUPREC trigger, a capital P will appear in the text field that called the trigger.
I want to call a Web form which should upload the image from my local machine.For that I have created a form which will take necessary data about employee now I want to Insert Image for that employee into table as I am new I struct on the Image uploading form. Latter I have seen the Enter & Maintain form which have Picture button.Pressing this button we get one new web form open & we can upload our image from there.
I have an Access DB which I'm using to connect to an Oracle DB at work. There are several Oracle DB's that I can connect to using Access but this one I'm not able to connect to. I get the Oracle error ORA-25153 Temporary Table Space is empty.
I don't have the ability to make changes to the Oracle DB only to read and query.
We're deploying a new product release however this build uses Oracle 11G. We want to perform a side by side install for testing purposes. These are low usage systems so installing another Oracle build will not hinder the system.
We intend to test for a couple of weeks and migrate data, then uninstall the 10G. I'm in the process of installing 11G now, the 10G is up and running. I don't want to impact the 10G install. I'm installing 11G in /home/oracle/oracle11G directory. I would like to use 1 Listener.ora file. I've broken down the install bellow.
10G SID "processing" Oracle home /home/oracle/oracle10g /mnt/Oracle/Oracle10GData /mnt/Oracle/OracleRedoLog
11G SID "processing11G" Oracle home /home/oracle/oracle11g /mnt/Oracle/Oracle11GData /mnt/Oracle/Oracle11GRedoLog
Do I need to specify the databasename for Processing2? Also the front end boxes (managers) are two different servers so Processingweb1 and processingweb2.
i have one report with one parameter name is :description the data of the description is
ALL 1" MD UBS 2" MD MNC 23 MSD LKT 11" WIP LLP 2 MC
and my question is when i call a report from form it shows the syntax error or command line.if i give the value MNC 23 MSD (or) LLP 2 MC in forms it run good.But if i give UBS 2" MD (or) ALL 1"MD (or) LKT 11" WIP in forms it through REP-159 Syntax error or command line.
I want to connect ORACLE-11gR2 that is on linux with an MS sql server. DO i need to use some third party drivers like easy soft ? Can i configure the database gateway without any third party drivers ?
Secondly if my oracle is on linux, can i configure the gateway on a seperate windows machine(that will connect to linux oracle and ms sql server) as i have found the gateway installation setup only for windows version.
i want to online my oracle 10g database but when i make connection string then i don't know what the port i set. I set default port 1521 but it not work on client site .
I know how to create a database link between two oracle servers, but problem is that SID is same for both servers, Is there any other way to connect two servers without using only 'SID' ..here are TNSNAMES.ORA FILE i HAVE
I am done with my configuration for oracle HS to connect to SQLserver. When I tried to start my listener, it is giving the following errors.
----------------------------------------------------------------- TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production System parameter file is D:oracleproduct10.2.0db_1 etworkadminlistener.or a Log messages written to D:oracleproduct10.2.0db_1
[code]..
Contents of my listener.ora file are below -------------------------------------------------------------- LISTENERSQLODBC = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS_LIST=
One of my MOD_PLSQL based Oracle APEX Application is running on the web. I have almost 1000 web users to access the Application where at least 250-300 users are always on line. In Oracle EM web interface When run ADDM I see suggestions "Investigate the cause of SQL*Net more data to client" or something like this. and I am getting complains about poor server response. Here are my configuration of the system:
Database Server Host: DBServer (Oracle Database 10.2.0.3) HTTP Server Host: OraHTTP (Oracle Companion CD 10g)
DADS.conf HTTP Server configuration MOD_PLSQL database access for web clients.
How can I increase database connection performance?
Im trying to connect a benchmarking application (benchmark factory) from my windows 32bit laptop to Oracle on my linux desktop.
When connecting I am supplying the following details: (im getting the error: ORA 12170 : TNS connect timeout occurred)
User/Schema : matt Password: **** Host: 192.168.1.9 Port: 1521 SID: orcl Connect as : SysDBA Connect Using: Instant Client (selected from a drop down) ----------------------------------------------------
I was trying to connect to a remote database from my client machine. Client machine runs a jsp code to connect to the database and execute a query. I have got oracle jdbc on my machine but still unable to connect to the database.
When checked in Google, i found that oracle connection manager has to be used to connect to the database from jdbc if the web server and database reside on different physical servers. But couldn't gather any further information regarding download and installation.
I do not have oracle connection manager on my system. I read in internet that it is shipped along with oracle 11g software. But i am not sure if that was the case in earlier version as well.
My question is where should i install oracle connection manager? (on database server or client machine) and is it possible to download and install only the connection manager as a stand alone so that i can connect to database from application?
Recently I came across a problem that 'ORACLE Client Side Disconnect every 5mins in app server' these days.
Situation: We have 3 APP servers, which was configured the same OS and ORACLE Client version and 1 DB server. 2 app servers ORACLE Client Side Disconnect every 5mins.but it's ok in another App server.
1. both Oracle SQL PLUS and PLSQL have this problem. 2. SQLNET.EXPIRE_TIME is the same for 3 APP 3. 2 APP server are virtual machine and balance server 3. APP servers : OS: 2003 Server ORACLE 9i DB server : ORACLE 11g 4. I don't think it's DB server problem because one App server hasn't this problem
I am currently using Oracle 10.2.0.1 version, in a single PC (test server) and MS-Access (2003) in it.
I was trying to use the logic of HS ODBC connectivity, but when i try to select the table from the MS-Access i am getting the following error.
"ORA-12154: TNS:could not resolve the connect identifier specified".
to create the successful connection between the MS-ACCESS and ORACLE. I just need to read some data from MS-ACCESS on a monthly base from a particular table.
I need to created DB link between oracle (10g on linux) and mysql 5.0 to configure a job to fetch data after every hour. I need solution that does not involve:
I have a strange problem of connecting Oracle Forms6i from our Remote site.actually we change our IP address of lease line, we connect to it.but when we connect locally,forms are running without any problem,but when we connect globally or from other sites it can't able to connect,even sql prompt and toad also connect from remote site,but when we try to connect forms(forms runtime) it gives error message(ORA-12203: TNS:unable to connect to destination).when we connect this application from local application(Forms) it can connect well but from globally it can't able to connect.
I have recently installed Oracle Express 10g Server on my local PC. I can successfully connect to this while bypassing the TNSNAMES from SQLTools, I can't however connect to this from Forms 10g or while using SQLTools with TNSNAMES. How do I configure my TNS names to use this server?
But i do a lot of work-arounds to make sure the installation does not make corrupt my OracleAgent,OracleService and OracleDataGatherer. If i just let the installation do its thing i have problems with my libraries, and can't start anything.
The errors are : Procedure entry point 'BlaBla' could not be located in the Dynamic Link library 'AnyName'.
I notice that i have 2 versions of the libraries in OracleHomeBIN (one version 8, one version 11). The programs that start the OracleAgent,Service and DataGatherer call the old libraries but expect to find values that can be found only in new libraries.