Mismatched Oracle Drivers - Upgrade (10.2.0.1 To 10.2.0.5)?
Jun 26, 2012
We are running Oracle Enterprise software on various client and DB servers and we are experiencing a problem (outlined here ) where the apparent mismatch between the oracle drivers are causing the errors. Our db servers are using 10.2.0.4 and 10.2.0.5 drivers and the clients are using 10.2.0.1.
Firstly, are the drivers the same on the Express and Enterprise editions so that if I update a development server usingExpress version (I dont have the authority to upgrade the Enterprise version nor the time to commission that) and it is successful, can I reasonably expect an upgrade to the Enterprise client versions on other servers to be safe/error free, baring environmental factors of course ?
Secondly, can I upgrade to version 10.2.0.5 now or do I have to go to the 11g version only ?
View 1 Replies
ADVERTISEMENT
Jun 26, 2012
We are running Oracle Enterprise software on various client and DB servers and we are experiencing a problem (outlined here [URL] .....) where the apparent mismatch between the oracle drivers are causing the errors.
Our db servers are using 10.2.0.4 and 10.2.0.5 drivers and the clients are using 10.2.0.1.
Firstly, are the drivers the same on the Express and Enterprise editions so that if I update a development server using Express version (I don't have the authority to upgrade the Enterprise version nor the time to commission that) and it is successful, can I reasonably expect an upgrade to the Enterprise client versions on other servers to be safe/error free, baring environmental factors of course ?
Secondly, can I upgrade to version 10.2.0.5 now or do I have to go to the 11g version only ?
View 2 Replies
View Related
Dec 6, 2010
I want to update the ODBC drivers in ORACLE 8i version. it's possible or not.
View 2 Replies
View Related
Jan 9, 2013
I work in a large bank in a department that produces reports for different areas of the bank. By and large, we use Microsoft Office products to interface with our Oracle databases.Recently, we had two new databases come online that use Oracle 11g - we were not using any 11g databases before this point. We have two other databases that we use that run on Oracle 10g.
Up until the two new databases were brought in, our reporting was done from systems that used 10g and 9I. We all ran the Oracle 9I driver to connect to them, and it worked very well without issue. With the addition of the 11g databases to our reporting pool, we have been forced to upgrade our ODBC connections to the 11g driver, and it has not gone well at all. I had one query that typically ran in 30 minutes take +13 hours+ to run yesterday. Speed is not the only issue, either; we have sporadic ODBC call fails, crashes, and other general failures to deal with.
Our Oracle DBAs have been trying to solve the issue, but have not yet found a solution, and each day that this goes on we fall further and further behind, as I have daily time-sensitive reports to send out that depend on this data.
One of our DBAs said she read somewhere that Oracle had not included MS Access support in the 11g driver, and that the errors were due to the imperfect connection that the driver created. I don't know of there's any truth to that, but it would provide an explanation for our troubles. We have to use Access for our reporting, as over 90% of our existing reports and processes use Access, and having to change over everything at once is just not feasible.
Is there any way to force the 9I and 11g ODBC connections to coexist, so that we don't have to use the 11g driver for our 10g databases? Or is there a better 11g driver available?
View 2 Replies
View Related
Jun 6, 2012
Along with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
View 4 Replies
View Related
Jun 14, 2012
Know the Patch set number to upgrade a Oracle 10.2.0.1 to 10.2.0.5 on Solaris 10 Spark 64bits?
View 1 Replies
View Related
Jul 19, 2013
I am going to upgrade database from 11.1.0.7 to 11.2.0.3
1) If compatible is set to 10.2.0 in 11.2.0.3, will it work ?
2) If compatible set to maximum level, will it affect our application ?
3) Whether any code related problem occurred after upgrading like PL/SQL codes ?
View 6 Replies
View Related
Mar 13, 2013
We are planning to upgrade our database from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi to Oracle Standard Edition 11g . We also have oracle apex installed on Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi database with oracle apex 3.1
No our plan to upgrade the database and oracle apex to 4.2. Since Oracle Enterprise Edition is licensing is very expensive we though of buying standard edition and upgrade to this version.
can we upgrade the oracle database from enterprise edition to latest standard edition?
View 3 Replies
View Related
Mar 22, 2012
i have 2 radio button on my forms and values are A and B. But i have load data from script and against that radio button i have some other values loaded,
When i select query on those records those have other value then radio button, it show nothing. I want to catch that error but there is no error shows. it shows no record to be query. i just want to inform user that that record is not that value which is associated with radio.
View 4 Replies
View Related
Jun 3, 2013
While i'm doing delete obsolete backup its Throwing error.
RMAN-06207: WARNING: 1 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Datafile Copy /u01/app/oracle/oradata/demo.ctl
View 2 Replies
View Related
May 31, 2013
I have a editing database with an eversions table:
NAME OWNER
---------------------- --------------------------------
WR5936_DN6676 FRED
WR6739_DN7507 FRED
WR12744_DN13994 FRED
WR6739_DN7511 BARNEY
WR6801_DN7513 BARNEY
I have a process database with a pversions table:
SOID
----------------
5936
6739
12744
6739
I need to select from the editing.eversions table all the records that do not have a matching record in process.pversion. The eversion table is text, and has some additional crap surrounding the characters I want to use for creating a join.
View 3 Replies
View Related
Dec 17, 2012
I've to install ODBC drivers required by a Windows application ( Windesign ).I've downloaded on Oracle website :
- instantclient-basic-windows.x64-11.2.0.3.0.zip
- instantclient-odbc-windows.x64-11.2.0.3.0.zip
- ODBC driver - Oracle 10.1.exe
- ODBC driver - Oracle 10.2.exe
- ODBC driver - Oracle 9.01.exe
- ODBC driver - Oracle 9.02.exe
But any of them contains install.exe or something like that...So I don't understand how to install instant client...I've found a doc on the web : " ... copy unzipped files into a folder ( ex.: C:OracleInstantClient ) and add Environment Variables TNS_ADMIN and PATH ) ... "I did it. But while adding ODBC driver with Windows admin tools , only SQL Server is available !!!.
View 2 Replies
View Related
Sep 13, 2012
the need to use 9i Oracle ODBC drivers with 11g? What issues might be raised with this? Our application is using a very old technology and has issues, in certain functional areas, with 11g ODBC, and we found by reverting the driver to 9.0.0.2 it works.
View 6 Replies
View Related
Sep 9, 2013
I installed the Windows 7 64-bit ODBC drivers, but the install does not seem to have made the drivers available to all users, but rather only the installing user. This install is for an image that will be cloned as a virtual machine, so the drivers, client, settings, etc. will need to be available to anyone who logs in.
Is there a way to do the install so that all the settings and files put in by the installer will apply to all users? And if so, how do you do that?
View 0 Replies
View Related
Feb 21, 2013
I am trying to come up with a plan for an upgrade that is needed for a server I maintain. It is a Windows 2003 32bit running Oracle 10.2.0.3 on old Hardware. It also has two obscure 3rd party applications that are running on it that directly access the database. These applications are supported by off site consultants.
My initial plan was to Create a Windows 2008 R2 Virtual Server and install the same version of Oracle 10.2.0.3. Using Rman clone the database to the new server. Have the consultants come in and get the applications working. Once everything in the new environment seems to be working fine, run RMAN again and reclone the database to have all the latest data. Then at a later time upgrade the database to 11g 32bit. Virtually no downtime and we could spend all the time we needed getting the applications working and testing the new environment.
The plan is dead right of the bat though because I realize 10.2.0.3 is not supported by Windows 2008 R2. I really did not want to add an Oracle DB upgrade into the mix at the same time. Just because their are so many changes from the old environment to the new that I want to break this down into manageable chunks. And I can maybe get by with 1 day of down time.
So now I am looking at installing 11g on my Virtual Server, Clone the database, upgrade the database, have the consultants come in and get the applications working. All the while we are down. If we run into any problems, which you always do, it just completely blows the schedule.
View 1 Replies
View Related
Jun 29, 2012
I need to upgrade our current system 10.2.0.5 (non Asm) to 11.2.0.3(ASM) on the same host.
So a few options : install ASM on current 10.2.0.5, create volumes etc and shift DB into ASM
upgrade to 11.2.0.3 GI - standalone
upgrade DB to 11.2.0.3
install 11.2.0.3 GI, configure ASM and run against 10.2.0.5
DB upgrade DB to 11.2.0.3
The DB upgrade has to come last I've been told.
View 1 Replies
View Related
Jun 26, 2013
I'm planning to upgrade a small database (~150GB) from 10.2.0.3 on windows 2003 23bit to 11.2.0.3 RAC on Linux 5.8.The database contains oracle spatial too. A suitable method and link to document to be followed.
View 2 Replies
View Related
Nov 19, 2012
I recently performed an upgrade on a new server from oracle 10gr2 to oracle 11gr2 (11.2.0.3).
I take the rman backup from oracle 10g server and restore it on new server where I installed oracle 11gr2.
But on my previous oracle 10gr2 server I enabled the auditing. After doing successful upgrade now when I try to login with any user except sys I receive the following error:
SQL> conn scott/tiger
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
ORA-02002: error while writing to audit trail
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
I got the workaround by setting the parameter audit_trail=FALSE (Previous value was DB_EXTENDED) .But I want my auditing to be enabled as per y requirements.
View 1 Replies
View Related
Sep 22, 2012
is the upgrade patch the same for standard edition and enterprise edition or there are two separate patches?
View 5 Replies
View Related
Oct 22, 2012
find reference note IDs for DB upgrade from 11.2.0.2 to 11.2.0.3.2, as I am finding only Exadata which I don't want but I want to find for Ebiz database, on OS - Solaris 10 9/10 s10s_u9wos_14a SPARC.
View 1 Replies
View Related
Nov 7, 2012
All my sys tables are very slow after my database upgrade from 10.2.0.4 to 11.2.0.3 on AIX 6.1
For example
select * from ALL_TAB_COLUMNS; -- taking 19 seconds in 11.2.0.3 and few millisec in 10.2.0.4
I have deleted and updated fixed and dictionary table statistics , till I facing this issue
View 5 Replies
View Related
Jul 3, 2010
I am trying to upgrade database from 9.2.0.7 to 10.2.0 in my test server. Here are the steps i am planning to do.
1. Export user data of production, Import in test db(ABC) using Destroy=Y Fromuser,touser parameter( this step just to refresh old test data)
2. Install 10g db, Use DBUA Utility of 10g to start upgrade>select 9i database which i want to upgrade
3. follow DBUA instruction ..create datafile paths, init.ora file, tnsnames,listener... same as the existing setup i have of 9i(so i can make replica of 9i in 10g)
question: I have another database(xyz) in test server its also in 9i, I don't want to upgrade that for now. so do i need to use one listener /tnasnames file of 10g and include setting of 9i in that 10g file ?
How to manage init,tnasnames,listener files setting in 2 db versions . Is there anything else i need to do to perform upgrade 9i-10g ? or its all ?
I will install just 10g database will import full export of 9i db. if i can do full import in 10g or should i just go for fromuser, tuser option to import? i believe for that i need to create datafiles, user,grant in new 10g db. I am not sure which option is best to perform 10g upgrade?
View 2 Replies
View Related
Feb 3, 2011
I want to know the detailed steps for the Upgradation of database from Oracle 9.2.0.1 to 9.2.0.4?
View 4 Replies
View Related
Mar 9, 2011
Recently we have upgraded our database from Oracle 9.2.0.8 to Oracle 11.1.0.7. But now the new requirement comes that it should be upgraded to Oracle 11.2.0.1
Our OS environment - UNIX AIX 5.3
Since its a development database, we have dataset of Oracle 9i and Oracle 11g1 cold backup. I have a query regarding this. what would be the best way to upgrade, is it from Oracle 9i to Oracle 11g1 or Oracle 11g1 to Oracle 11g2?
View 3 Replies
View Related
Jan 21, 2011
Iam planning to upgrade my Oracle Database from 10G to 11G .
Its on HP Unix Environment 11.23 and
Oracle CRS 10.2.0.4
Oracle ASM 10.2.0.4
Oracle RDBMS 10.2.0.4
Its in RAC env...and Active-Active DB running controlled by tnsnames.ora .
View 8 Replies
View Related
Mar 4, 2012
My Oracle DB 10.2.0.1 is working fine in Windows XP. Now, I want to upgrade to Oracle 10.2.0.4. I have two Oracle CDs
1) Oracle Database Vault 10g release 2(10.2.0.4.0) for Microsoft Windows DVD&
2) Oracle Enterprise Manager 10g release 4 Grid control (10.2.0.4.0) patch for Microsoft Windows DVD.
But I don't have metalink support. How can I upgrade Oracle DB.
View 1 Replies
View Related
Oct 25, 2012
After upgrade 10g to 11g, the below sql is not working. I have issue with connect by, if we use it with subquery it will hang.
select item_code
from bom_list_pos
where ln_id in (select ln_id
from bom_list_nodes
start with ln_id IN (select ln_id from bom_used_work_pack where rownum =1)
connect by prior ln_id = parent_ln_id)
I ran 10g, able to get it less than minute, but 11g hang. below is explain plan.
11g explain plan
-----------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-----------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 19 | 209 | 148M (1)|494:23:18 |
|* 1 | FILTER | | | | | |
| 2 | TABLE ACCESS FULL | BOM_LIST_POS | 810K| 8711K| 7484 (1)| 00:01:30 |
|* 3 | FILTER | | | | | |
|* 4 | CONNECT BY NO FILTERING WITH SW (UNIQUE)| | | | | |
| 5 | TABLE ACCESS FULL | BOM_LIST_NODES | 46041 | 449K| 241 (1)| 00:00:03 |
|* 6 | FILTER | | | | | |
|* 7 | COUNT STOPKEY | | | | | |
| 8 | INDEX FAST FULL SCAN | UWPD_LN_FK_I | 1 | 5 | 2 (0)| 00:00:01 |
-----------------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter( EXISTS (SELECT 0 FROM "M_SYS"."BOM_LIST_NODES" "SYS_ALIAS_1" WHERE "LN_ID"=:B1 START
WITH EXISTS (<not feasible>)
3 - filter("LN_ID"=:B1)
4 - access("PARENT_LN_ID"=PRIOR "LN_ID")
filter( EXISTS (<not feasible>)
6 - filter("LN_ID"=:B1)
7 - filter(ROWNUM=1)
-------------------
10g explain plan
--------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
--------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 440 | 9240 | 27 (4)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID | BOM_LIST_POS | 88 | 704 | 6 (0)| 00:00:01 |
| 2 | NESTED LOOPS | | 440 | 9240 | 27 (4)| 00:00:01 |
| 3 | VIEW | VW_NSO_2 | 5 | 65 | 2 (0)| 00:00:01 |
| 4 | HASH UNIQUE | | 5 | 30 | | |
|* 5 | CONNECT BY WITH FILTERING | | | | | |
| 6 | TABLE ACCESS BY INDEX ROWID | BOM_LIST_NODES | | | | |
| 7 | NESTED LOOPS | | 1 | 16 | 1 (0)| 00:00:01 |
| 8 | VIEW | VW_NSO_1 | 1 | 13 | 1 (0)| 00:00:01 |
|* 9 | COUNT STOPKEY | | | | | |
| 10 | INDEX FULL SCAN | UWPD_LN_FK_I | 122 | 366 | 1 (0)| 00:00:01 |
|* 11 | INDEX UNIQUE SCAN | LN_PK | 783 | 2349 | 0 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | | | | |
| 13 | CONNECT BY PUMP | | | | | |
| 14 | TABLE ACCESS BY INDEX ROWID| BOM_LIST_NODES | 5 | 30 | 2 (0)| 00:00:01 |
|* 15 | INDEX RANGE SCAN | LN_LN_FK_I | 5 | | 1 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | LP_LN_FK_I | 88 | | 1 (0)| 00:00:01 |
--------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
5 - access("PARENT_LN_ID"=PRIOR "LN_ID")
9 - filter(ROWNUM=1)
11 - access("LN_ID"="$nso_col_1")
15 - access("PARENT_LN_ID"=PRIOR "LN_ID")
16 - access("LN_ID"="$nso_col_1")
View 3 Replies
View Related
Oct 26, 2010
I am migrating Oracle windows 32-bit (10g) db to hp-ux machine (11g R2). I have exported all the data from windows machine using dp and plan is to export it to 11g db on UNIX. Before I start the import I need to have similar structure on newly created 11g db on UNIX (tablespaces etc). I am wondering what would be the best option to
1. Generate the code to create all the tablespaces on the new database
2. How can I tell import into different tablespace?
3. I would like import indexes into separate tablespace than data.
Total size of the export is around 300gb.
View 3 Replies
View Related
May 18, 2010
Our company is using forms 4.5 on Oracle 8.0.6. We want to upgrade to forms 6i. But there is no oracle support available for this version. Before going to forms 10g, we have to upgrade our forms to 6i.
My question is how do we request to Oracle support to supply us the 6i installation CD's. Is there any particular format to request upgrade from oracle support?
View 1 Replies
View Related
Jul 4, 2010
Question:1 I am trying to upgrade 9i to 10g , using DBUA. I am getting below error at step 1:
There is an error in creating the following process: C:\oracle\ora92\bin\sqlplus -s/nolog
The error is: createprocess:C:\oracle\ora92\bin\sqlplus -s/nolog error:193
I can login as sysdba ,using C:\oracle\ora92\bin\sqlplu for both 9i as well as 10g i did set oracle_home to C:\oracle\ora92, using command prompt.
Question 2:Is there any way i can generate the database template of running production so i can use same template to create the test server. I cant find existing template in prod :ORACLE_HOME/assistants/dbca/templates , all templates looks like the default one only.
Question 3:If i have different structure in test db server i.e i have datafiles, controlfiles in I and J drives in production, but in test i have all datafiles ,control files in H:drive Can i use Transport_tablespaces import to upgrade test server ?
View 1 Replies
View Related
