i try to open PL/SQL Developer and i get this error:
Could not locate OCI dll
OracleHomeKey:SOFTWARE\ORACLE\KEY_OraOracle11g_home1
OracleHomeDir: d:\app\...................\product\11.1.0\client_1
what can be the problem ?
I am trying to run PL/SQL Developer from command line, So it can open with an opened SQL WINDOW by default, with a script (which I specify in the command ) already in it:
I've tried:
"C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb
but it just opens the application with a connection, no file.
*CORRECTION* While I was writing this post, I tried something , which is not so sophisticated, and it appeared to work...
C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb "C:Program Files (x86)PLSQL Developerandrey.sql"
I have u na forms developer application in 6.0 that generates a Word document. This application runs successfully on Windows XP operating system. We now have PC's new operating system Windows 7 and officce 2010. My procedure reads a specific route where a template in Word which is used to generate the document. In the user's PC application that does not generate the document even shows me an error message. But when I enter my network user with the user's PC and the document genre generates me perfectly. I checked if the user has access to the server path specifies where the template encuntra wish to open and if you have them.
View 1 Replies View RelatedI have upgraded my Operating Syatem from Vista to Win7. I have SQL nav version but is not supported on Win7. So I have installed PLSQL developer. When I try to connect its giving the error connection not open. But when I tried the same credentials with SQLPLUS it's working fine.
View 3 Replies View RelatedI have Oracle 11g XE and Toad installed on Windows 7 64-bit machine. I am able to connect to database from Oracle's SQLPLUS. But when connecting from TOAD i am getting ora-06413 connection not open error.
View 1 Replies View RelatedI have the following code for a Apex(Application Express) project I am developing.
declare
mail_id varchar2(100);
min_skill_cnt number;
skill_cde varchar2(30);
total_leave number;
toal_emp number;
cursor cur is
select S_EMP_EMAIL
from EMP_SKILLS_INFO where SKILLCODE='MGR' and S_EMP_EMAIL = lower(:APP_USER) ;
cursor minskill is
select skill_code,MINRQMT_AM
from skills_code_info
where skill_code in (select skillcode from emp_skills_info where S_EMP_EMAIL = lower(:APP_USER));
cursor leavecnt(v_skill IN VARCHAR2) is
select count(*) from emp_leave_info
where leave_date = :P24_LEAVE_DATE
and emp_email IN (select S_EMP_EMAIL from EMP_SKILLS_INFO where SKILLCODE = v_skill);
cursor empcnt(v_skills IN VARCHAR2) is
[code]...
Ideally this should send email to managers when a particular skill is running short when employee applies for leave. I am getting error that cursor is already open when I run this code. I am not sure which cursor or where it is picking open cursor command.
i've been trying to connect to the Oracle DB with Oracle SQL Developer.I get a message
State: Test Failed - IO Exception "The network adapter could not establish the connection"
When i go try tnsping 1521 It detects a connection by Oracle Database.And finally i get TNS-03505: Failed to resolve name
When i went into the "services.msc" and tryed to run the "OracleOraDb10g_home1TNSListener"
Got a message: "Error 3: The sytem could not find the specified path"
i install the PL/SQL developer version 9.0.3.1641 on Windows-7 64 bit...i have Oracle 11g on this computer.when i run PL/SQL i got this error:
initialization error
could not initilize "c:\.......oci.dll"
make sure you have the 32 bits oracle client installed..what i need to install and from where to download ? (can i have link to download)
I am trying to connect to a remote database (Oracle) using my Windows terminal and I am successfully able to connect. But when I try to open a SQL File is gives the following error:
SQL > @int1.sql
SP2-0310: unable to open file
I found out that this error occurs when the file name or the path is invalid. But since I am having a remote access I really don't know the location. What can be done to remove this error?
I tried to debug the procedure in Oracle SQL Developer and got the below error,
Connecting to the database TEST.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '****', '4000' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database TEST.
Here,
TEST is my database name,
**** is IP address of my local machine
4000 is the port number, also I have set the debug port range as 4000 - 4999 in SQL DEVELOPER.
firewall is not enabled in my machine.
I am able to connect to the DB in TOAD , but I am not able to connect to the DB in PL/SQL developer.
PL/SQL developer
Version 8.0.1.1498
01.61091 - Unlimited user license
Windows 7 6.1 Build 7601 (Service Pack 1)
Oracle 11g
I am getting the below error
ORA-12154: TNS could not resolve the connect identifier specified
I installed oracle 11g successfully and was able to login with SQL plus.When I tried making a connection with the username and password via SQL developer I'm getting the ora-12505 error (picture is attached)
Printout of tnsname.ora:
# tnsnames.ora Network Configuration File: C:Oracle11gproduct11.2.0dbhome_1
etworkadmin nsnames.ora
# Generated by Oracle configuration tools.
ORACLE11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oracle11g)
[code]....
getting sql developer connected with my oracle database?
I have a Database that has a frontend in MS Access and a backend in Oracle. When I try to open the Oracle Table/s in the MS Access Frontend, it gives me this error message:
Reserved error (-7711); there is no message for this error.
There is some stuff on the internet about this error but none of it fixes my issue. It seems to be an MS Access error rather than an Oracle error. Only thing is this issue is only on Machines that are running on XP. I have no problem on mine which is Windows 7.
I am recieving errors when trying to load the control file. The errors are as follows:
SQL*Loader-500 Unable to open file (homework.ctl)
SQL*Loader-553 file not found
SQL*Loader-559 SYstem error: The system cannot find the file specified.
My control file is located directly in the C drive (C:homework.ctl). The control file contains the following
LOAD DATA
INFILE 'c:country.dat'
APPEND INTO TABLE homework
fields terminated by ',' optionally encloded by '"'
(country, month, day)
WHEN (month='April')
The command I am entering is:
sqlldr system/password control=homework.ctl
I've tried c:homework.ctl, 'c:homework.ctl', and placing the file in the BIN folder of Oracle.
While installing Dev Suite 10g i got the following error:[URL] What should i do? I specified another oracle home name, i have oracle database 11g installed too, and i'm installing dev suite 10g on another location.
View 3 Replies View RelatedI am getting bellow error message when trying to connect Sybase through Sql developer: status:failure-test failed:IO Error:The network adapter
View 1 Replies View RelatedWhen I try to install "Oracle Developer Suite 10g 10.1.2.0.2" on Windows 7, I'm getting error , " Install has encountered an error while attempting to verify your virtual memory settings. verify that the sum of the initial sizes of the paging files is atleast 256 MB."
View 4 Replies View RelatedI am using Oracle 11g version, and i am using plsql developer 7.1.I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like: ora-12545 connect failed because target host does not exist...I recently installed oracle dev_suite 10g client first and then i installed oracle 11g server in windows 7. Both tns files are having identical entries.
Please find the tns entries below.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DEPANIGR-IN)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
[code]....
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate;
startup open;
quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog
sql>connect sys/* as sysdba
sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
I have 3 code files written in ProC. I have precompiled, compiled, tested them in my local environment (Windows) & they work fine. But when I try in real environment, AIX 5.3, I can precompile them. But when I try to compile & link them with the libclntsh library I get errors. I am using a Makefile but just for testing this is the command -
xlc oraProcs oraProcs.c test_curva.c lib_util.c -I $ORACLE_HOME/precomp/public -L $LIBPATH -l libclntsh.a
Error - ld: 0706-006 Cannot find or open library file: -l libclntsh.a
ld: open(): A file or directory in the pathname does not exist
where LIBPATH = $ORACLE_HOME/lib
library libclntsh.a exists in $ORACLE_HOME/lib & has the right permissions
I also tried removing the library libclntsh.a & recreating it using the command - genclntsh When I run this command I get this warning more than once -ld: 0711-783 Warning TOC overflow TOC size: 66888 Max size: 65536 genclntsh creates the library libclntsh.a, just not sure if these warnings damage the library file and are related to my link erros in some way.
I have newly installed Oracle 11g R2 64 bits to window 8 PRo 64 bits. Able to connection successfully Oracle NEt Configuration Assistant service name.
But when I try to connect it Toad 9.6 32 bits its show error message
ORA-06413: Connection not open
I'm getting an error when trying to use the new Data Pump Export/Import utility.
I am able to create a directory using SQLPLus, and I get the "Directory Created" message, but no directory actually gets created on the server.
SQL> CREATE DIRECTORY datapump AS 'C:Inetpubdatafiledatapump';
Directory created. But I dont see the directory created on the server.
Then on the server:
C:Documents and SettingsAdministrator>expdp ******/****** FULL=y DIRECTORY=datapump DUMPFILE=expdata.dmp LOGFILE=expdata.log
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
Oracle Database: Oracle 11g Version: 11.1.0.6.0
Tool: Oracle SQL developer. Version : 1.1.3
Problem:
After completing debug of procedure from SQL Developer, whenever I try to compile that procedure or execute any query from the SQL worksheet, I get the closed connection error message. However I can debug that procedure for any number of times. Any other activity for that database connection gives closed connection error.
I have created the below stored procedure and calling the procedure in when-button-pressed trigger. Problem here is that when I cancel the file selection in file open dialogue box its raising exception.
PROCEDURE TEST
IS
buffer_lines client_text_io.file_type;
v_outputstr VARCHAR2 (32767);
p_delimiter VARCHAR2 (10) := '","';
v_transaction_no VARCHAR2 (10);
BEGIN
[code].......
I try to transfer data from one database to another one through data pump via SQL Developer (data amount is quite important) exporting several tables. Tables export is doing fine, but I encounter the following error when I import the file (I try data only and data + DDL).
"Exception: ORA-39001: argument value invalid dbms_datapump.get_status(64...=
ORA-39001: argument value invalid
ORA-39000: ....
ORA-31619: ...
The file is in the right place, data pump folder of the new database. User is the same on both base, database version are similar.
I want to create a wallet on RAC setup.I have two node setup.I have created the wallet directory under shared folder /u01/oradata/$ORACLE_SID/wallet
I am Unable to open wallet.I tried this using the below command
SQL> alter system set encryption key identified by "aryabhat";
alter system set encryption key identified by "aryabhat"
*
ERROR at line 1:
ORA-28353: failed to open wallet
Following is the content of sqlnet.ora file
(path : /u01/app/11.2.0/grid/network/admin/sqlnet.ora)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /u01/app/oracle
ENCRYPTION_WALLET_LOCATION =
(SOURCE = (METHOD = FILE)(METHOD_DATA =
(DIRECTORY = /u01/oradata/$ORACLE_SID/wallet/)))
My database is in open and noarchive log mode which was working fine but since from last 2 to 3 days it is throwing me an error
ORA-00308: cannot open archived log with ora -00600
ORA-00308: cannot open archived log 'D:\HFTEST\ARCHIVE\ARC1_779994432.1'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00600: internal error code, arguments: [kewrsp_split_partition_2], [87], [902828405], [11905], [], [], [], [], [], [], [], []
I dont understand why it so, i googled it but i didnt find anything.
I install Forms 11 g . how i an use my Old Fmb files ? (my forms designed in forms6 i )
View 2 Replies View Relatedi, I've Two database one for primary(GISC) and one for standby (GISCST) when i start open standby database i appeare erro :
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'D:\ORACLE\ORADATA\ORCLSB\SYSTEM01.DBF'
I take the copy the datafiles from primary database and Pase them to the Standby database and the Enviroment of two database is :
SPfile for primary(GISC) IS:
*.compatible='10.2.0.3'
*.control_files='C:\oracle\product\10.2.0\oradata\gisc\CONTROL01.CTL','C:\oracle\product\10.2.0\oradata\gisc\CONTROL02.CTL','C:\oracle\product\10.2.0\oradata\gisc\CONTROL03.CTL'
*.db_block_size=8192
[code]....
My database is in open and noarchive log mode which was working fine but since from last 2 to 3 days it is throwing me an error
ORA-00308: cannot open archived log with ora -00600
ORA-00308: cannot open archived log 'D:\HFTEST\ARCHIVE\ARC1_779994432.1'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00600: internal error code, arguments: [kewrsp_split_partition_2], [87], [902828405], [11905], [], [], [], [], [], [], [], []