Forms :: Frm-41051 / Cannot Update Record?

Jan 11, 2011

I got this error: frm-41051: You can not update this record

While i searched about this error on net,

I did everything..my block property is yes for INSERT_ALLOWED and UPDATE_ALLOWED.

By programatically I didn't set property false for that block.i check each and every item property for that block...its also yes for INSERT_ALLOWED and update_allowed..

View 2 Replies


ADVERTISEMENT

Forms :: How To Get Rid Of FRM-41051 Error

Jun 23, 2003

I have a form with master detail blocks and the block properties are set to no inserts, no updates, and no deletes. When I am at the last record and whenever I navigates to the next record, the system gives a message �FRM-41051: You cannot create records here�. Then the system is not allowing me to go back to anywhere and it insists me with a message �FRM-40202: Field must be entered�. The if I try to exit the form it says �Do you want to call the new form?� How to get rid of this?

View 2 Replies View Related

Forms :: How To Update Record

Jan 1, 2013

I want to update record when i press the button "update" but i don't have idea ,if i will create a new forms ,or new block or the update is made in the same form.

View 10 Replies View Related

Forms :: Unable To Update Record

May 10, 2010

I have modified an existing form which is from 4 tables. I altered one of the table to suit my requirement and have compiled the form . It is compiled with out any errors. But when i enter any data it shows an error "frm-40509 --Unable to update record" and does not gets saved.

View 10 Replies View Related

Forms :: Cancel Update If Record Has Been Reported

Nov 19, 2010

I don't want the users to be able to update a record where the date reported field has a date.I have used the set_block_property(blk_id, update_ allowed, property_false). But it still prompts me if I do change something and I try to exit the form.

How can I stop the "Do you want to save changes you have made" box from showing?

View 5 Replies View Related

Forms :: Update Record In Join Condition Block?

Jun 13, 2012

i want to update record that is fetched based on join condition on form

1. made a block manually :::: EMPSAL
2. Query DATA SOURCE NAME :::: EMP a, Sal b
3. Where Clause :::: a.empid = b.empid
4. DML DATA Target Type :::: Table
5. DML DATA Target Name :::: EMP a, Sal b
6. All Columns are marked a.empid, a.empname, b.sal, b.date etc

It does not allow me to update record.

View 1 Replies View Related

Forms :: INSERT Record - Update Columns Of Table

May 31, 2010

I would like to UPDATE the columns p1 and p2 of my table student (studentid:pk,name,p1,p2,...) for a given studentid.and I have a when-button-pressed trigger with this

UPDATE student
SET student.p1=:validation.proj1,
student.p2=:validation.proj2
where UPPER(student.studentid)=UPPER(:validation.studentid);commit_form;

when I run my form with a correct studentid, I got this error: FRM-40508: ORACLE error: UNABLE to INSERT record

but it is cworking correctly in sqlplus; and I have all priveligies.

View 4 Replies View Related

Forms :: Insert / Update And Delete Single Record At A Time?

Aug 10, 2005

I have multirecord block and I want to disable Inserting/Updating/Deleting more then one record at a time.

View 32 Replies View Related

Forms :: Oracle Unable To Update Record - Unique Key Violation Error

May 10, 2011

I have the search screen in my form so after searching if i select the row by using the button it will navigate the first tab page that is "gas" screen here if i tried to change the value like update and save the form it is not allowing me to update the value raising the error message "oracle unable to insert the record". if i see the "display error" in menu it is having the select statement with error "unique key violation error ora-00001".

In save button containe "commit_form"

View 15 Replies View Related

SQL & PL/SQL :: Update Previous Row Based On Next Row And Update Duplicate Record

Mar 6, 2013

create table test1

( ID NUMBER(11)
,MEMBER_NMBR NUMBER(10)
,CODE_NMBR NUMBER(7)
,ROW_EFCTV_DT DATE
,ROW_TRMNTN_DT DATE

[code]....

insert into test1 values (11007,7462,32,'30/sep/2012','31/dec/9999',3,'25/sep/1998','AUTUMN',1,0,344);
insert into test1 values (11007,7462,32,'30/oct/2012','31/dec/9999',3,'25/sep/1998','AUTUMN',1,0,344);
IDMEMBER_NMBRCODE_NMBRROW_EFCTV_DTROW_TRMNTN_DTFLAG_NMBRBRTH_DTNAMECLAIM_CDAMT1AMT2
1100774623209/30/2012 00:0012/31/9999 00:00309/25/1998 00:00AUTUMN10344
1100774623210/30/2012 00:0012/31/9999 00:00309/25/1998 00:00AUTUMN10344

I have to update the row_trmntn_dt of first row to row_efctv_dt of 2nd row which is 30th Oct 2012 - 1 day i.e. 29th Oct 2012

View 10 Replies View Related

Delete Record In Update Trigger?

May 24, 2012

the following case is successfully done with mssql databases.

Case:

Table UserGroup
Columns id, name, handshake

When the handshake is set to 'd', this record should be deleted. I know it is bad behaviour by design.

What have I done so far:

- created an after update trigger (mutual error) Caused by trying a delete action in the update action, not possible.

- created a view in combination of instead of update trigger.

This causes also mutual error, or if ignored (PRAGMA AUTONOMOUS_TRANSACTION), an deadlock.

Code so far:

create or replace procedure Delete_UserGroup_sp(p_groupId in USER_GROUP.HMIUSERGROUPID%TYPE, p_handshake in USER_GROUP.HANDSHAKE%TYPE)
is
begin
if p_handshake = 'd' then
delete USER_GROUP WHERE HMIUSERGROUPID = p_groupId;
commit;
end if;
end;

create or replace view USERGROUP_V as select * from USER_GROUP

create or replace trigger USER_GROUP_T1
instead of update on USERGROUP_V
for each row
declare
PRAGMA AUTONOMOUS_TRANSACTION;
begin
Delete_UserGroup_sp(:new.HMIUSERGROUPID, :new.HANDSHAKE);
end;

View 5 Replies View Related

Forms :: Populating Values To Record Group From Multi Record Datablock

Jul 26, 2012

My procedure proc_ex is in when_validate_item trigger

I have one Multi Record data block in my form with values in its items

I need to Populate multi record block values to one Record Group using

add_group_row,
add_group_column,
set_group_char_cell to populate values to record group

Let us suppose my multi record data block looks like

item1 item2 item3 item4
10 20 50 70
25 15 30 45
45 90 47 38
75 25 85 90
30 56 78 80

how to populate these multi record datablock values to Record Group ???..Eagerly waiting for your Replies

View 3 Replies View Related

SQL & PL/SQL :: Record Doesn't Contain Page Then Need To Update As Null

Jun 13, 2013

frame a query for the below values .I have few records in a below format.

1) 'CODE#ATC#YEAR#1980#NUM#4229#VOL#80##'
2) 'CODE#NSWLR#YEAR#1985#PAGE#158#VOL#4##'
3) 'CODE#WASC#YEAR#1981#MONTH#07#DAY#24#'
4) 'CODE#RPC#YEAR#1919#PAGE#296#VOL#36#'

I need only the Page from the above records.For example if i take this record

'CODE#NSWLR#YEAR#1985#PAGE#158#VOL#4##' -- I need to extract only the Page from this like 158.

If the record doesn't contain Page then i need to update as null.

View 30 Replies View Related

SQL & PL/SQL :: Select First Unlock Record In Table For Update

Jun 6, 2012

I'm looking for a solution to select the first row that is not currently locked in a table and insert a record to another table that reference that first row. this is my scenario:

create table ticket
(
id number(10) not null,,
ticket_type number(1) not null,,
is_sold number(1) not null,
CONSTRAINT ticket_pk PRIMARY KEY (id)
);

[Code]...

id ticket_type is_sold
------------ -------------------- -----
10000004 1 1
10000005 2 1
10000006 1 0
10000007 1 0
10000008 2 0
10000009 2 0

SQL> select * from customer_ticket;

cust_id cust_name ticket_id
------------ -------------------- ----------
1 John 10000004
2 Sara 10000005

my goal is finding the first free ticket ( not sold ) in the ticket table and insert buyer information of that ticket in customer_ticket table. at last I will mark that ticket as a sold one in ticket table with update.

Problem is that the first transaction locks the the first row in ticket table and the second transaction running the same query goes to wait untill the first transaction commit or rollback. However when first transaction finish successfully, second transaction select duplicate id from ticket table that was selected by the first transaction!

I tried to solve problem with "skip locked" and "nowait" options with select for update, but they didn't work.

View 13 Replies View Related

Forms ::create History Record For Each Record Whether Updated Or Not

Sep 13, 2011

I have a fairly standard Purchase Order form which contains pre-loaded data (been uploaded from an XML file).When the Purchase Order is processed, the form updates a Price History table only if the Price on the PO_Details changes.The code for updating the price history table is contained in a PRE_UPDATE trigger on the PO_Details Data Block.

No other data changes on the PO_Details table.I now want to change this so that the Price History table is updated even if the price does not change i.e I want to create a history record for each record on the PO_Details irrespective of whether it was updated or not.

Is there an alternative trigger that I can move my code to (ie move it from PRE_UPDATE) to some other trigger that is fired for each PO_Details record even if there is no change.

View 4 Replies View Related

Forms :: Only New Record Have Saved Last Record No Longer Exist

Jun 29, 2013

I create a data block on a table when I am inserting new record only one record have been saved. Last record no longer exist.

View 4 Replies View Related

Application Express :: Update Record In Another Row When Date Changed

Oct 10, 2013

As all of you know, In the Apex,  when you create a form with report in the page, you are able to insert and edit data. But when you edit the data, the data will be modified in the same row. In other word, you loose the old data.

What I need to do is: I have revised_num field and production_date field. I want to create a form with report and insert and edit data as is in the apex and insert 0 to the revised num until production date is null. But when  production date is not null, then from that point, I want to insert data to another row and modify revised num to 1. and I want the revised num be incremented by 1 each time the user modifies the data after the production date is not null.I don't know where I should start.

View 12 Replies View Related

Application Express :: Send Link To Update Some Record

Mar 8, 2013

Is there some simple solution how to send email to user with link ('I don't want to receive emails from you in the future') ?

The link should contain some key information for each user.

If user click the link - update of the table should be done. (some IDC updates from 'Y' to 'N').

Specs: APEX 4.1.1
Listener 1.1.3
DB 11G
Apache Tomcat 6.0

View 1 Replies View Related

Precompilers, OCI & OCCI :: How To Detect Offending Record For Update Statement

Jul 23, 2008

way to run an update statement through OCI and make it stop on the first offending record and then identify that record? Here is an example of what I need to do: I run an update with 5 records in the input buffer like this:

- the 1st record exists in the table
- the 2st record exists in the table
- the 3rd record does not exist in the table
- the 4rd records exists in the table but is violating some unique constraint
- the 5nd record exists in the table

I need to report that the 4th record from the input buffer has a problem, and then commit records 1, 2 and 3. Do not commit record 5. So far I have tried the following:

- OCIStmtExecute with OCI_DEFAULT. It stops on the first error, but I don't know how to identify the bad record. OCI_ATTR_ROW_COUNT returns the number of affected records in the target table. I didn't find any other attributes that would return 4, for the 4th bad record in the input buffer.

- OCIStmtExecute with OCI_BATCH_ERROR. I can identify the bad records in the input buffer by using OCI_ATTR_DML_ROW_OFFSET. However, OCIStmt Execute does NOT stop on the first violating record. It loads the whole input buffer and then reports which records were in error. I don't know how to commit only up to the first bad record -- the 4th in the example.

View 6 Replies View Related

Forms :: Choose Lov In First Record That Won't Be Display In Second Record Lov

Sep 10, 2012

I have one multi record block in that i have one LOV..If i choose lov in first record that won't be display in second record lov...

View 4 Replies View Related

Forms :: Insert And Update Directly Into Table From Pre Update Trigger Of Block?

May 14, 2010

I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:

If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.

Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?

View 4 Replies View Related

Application Express :: 4.2 Upgrade - Update Record Button Apply Changes Disappeared

Aug 27, 2012

I got a bug related to update information in APEX.

the situation occurs when I go to update a record the button Apply changes disappeared, it shows me only the button create, so when the user click on it, it creates a duplicate.. so how can i have the button "apply changes" back?

View 7 Replies View Related

Application Express :: How To Call Function Behind The Button And Update Only Specific Record

Oct 3, 2012

1 - i want to ask few things as i m new to apex, i am using apex 4.1, and created 3 select list and a button in selecting of parameter,

1 select list : select area
2 select list: select product
3- select list - size of the product

i want to generate Ids for the following. for that i created query for INSERTING RECORD FROM ONE TABLE TO ANOTHER , generation the ids when button pressed "Generate" after selecting parameters,

Now where i call that QUERY on button ? because when i create button its gives me option to submit, defined dynamic action, etc, where i call the function name id_generation when button pressed?

2- second thing i created tabular " select user_id, product_name, product_type from product".

By default check box list are create delete submit button are created, first when i insert record it saves that was fine, e.g i entered 50 records and afterward i want to update only one record, e.g there is a record product name = box, if i change it to box small and click submit then it saves all the page means all 50 records,

I want to submit only that record that i changed, for that i use the logic that only those records should be updated which are checked but the user. how will i do this ?

View 4 Replies View Related

Update Field With 1st 9 Characters Of Another Field In Same Record?

Apr 23, 2009

I need to update a field with the 1st 9 characters of another field in the same record.

View 1 Replies View Related

Forms :: When User Change / Delete Any Record / Row In Forms Data Automatically Move To Other Table

Dec 25, 2011

when a user change or delete any record or row in forms data automatically move to other table because i want to compare old and new record.

View 8 Replies View Related

Forms :: Insert Record Into Lov Through Oracle Custom Forms?

Oct 8, 2013

I have a LOV in a custom oracle forms.this lov is linked to a record group.

Presently the column on which lov is created does not contain any value.

I want to insert value into the lov through the forms.

I am not able to insert data into it through forms

View 12 Replies View Related

Forms :: Do You Want To Save Record

Aug 22, 2005

I have created a form which as two block as master and detail.I am facing two problem in my detail block.

First: When I populate records in detail block, it prompt a message 'Do you want to save record ?'.
Second : When I alter any value in detail block and move to next record, it prompt a message 'Do you want to save record ?'

Is there any way where, system don't prompt me a message for saving record and user can continue with changes and save the records when he desire.

View 16 Replies View Related

Forms :: Record Is Getting Saved Twice

Mar 8, 2012

My record is getting saved twice every time I push my button to commit changes to my DB.I have already records from my table and when I click for that record to update the grade. the same record is getting saved twice.I have put my queries in on-update trigger to update the grade of my record. I check my query, don't have errors. I don't know what's wrong with this.

View 24 Replies View Related

Forms :: Each Second Record With Different Background_color

Jul 9, 2004

To improve legibility, I would like to display always the second row with another (lets say green) background_color. Therefore I created a BLOCK - Post-Query Trigger containing the following lines:

--IF (:EMP.COMM IS NULL) THEN
IF (MOD (TO_NUMBER(:SYSTEM.CURSOR_RECORD), 2) = 0 ) THEN
SET_ITEM_INSTANCE_PROPERTY('EMP.ENAME', CURRENT_RECORD, VISUAL_ATTRIBUTE ,'GREEN_BACKGROUND');
END IF;

NULL;

My first problem: I do not know how to the determine the whole record, therefore I just used EMP.ENAME

Second problem: The green background starts at record number 7 (if the first record is number 1, (is this so, or does it start with zero ??)), and then number 9, 11, 13 (from scott.emp) has a green background-color.

View 2 Replies View Related

Forms :: Could Not Reserve Record (2 Tries)?

Nov 5, 2011

I administer a database oracle 10g for a small company . the we mostly work in oracle forms 6i and after 2 3 days a message springs up "Could not reserve record (2 tries), keep trying?" when a user tries to save a record . Is there any decent solution to this problem other than restarting the Db server all over again .?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved