I have my own design employee time attendance application which i design in oracle forms 6i and oracle database 9i. Now I bought one USB fingerprint reader so I can attached this device to my application. I want every employee to scan there finger in my reader and I will record there attendance. How I can configure this device in my form.
I have Microsoft finger print reader and installed. I would like this that this device will capture finger prints from form application.i have installed fingerprints software and then oracle. The device is active on sdk. when i use form the device shown nothing. How i can interact with oracle and device.
Our product needs to use SecureMag Encrypted MagStripe Reader to get the credit card info in POS.After adding the code in every module, most of them work well now. But one of them does not. We met the error FRM-41344.This module is called from another(using call_form) that could also have this functionality(it works well in this module).
The error raise in this code. The global variable is assigned a value in each module.I got some info from the internet. But I still get error after I did the following operation.When using Oracle Forms, you might receive this run-time error:
FRM-41344: OLE object not defined for object in current record.
which can occur for either of these reasons: The OLE container has lost the definition of the Oracle Video Custom Control. To fix this problem, go into the Forms Designer, and re-insert the Oracle Video Custom Control by clicking the right mouse button inside the OLE container and choosing Insert Object
The Oracle Video Custom Control has not been initialized. To fix this problem, modify the form so that it can navigate to the block that contains the Oracle Video Custom Control. You can either make this block the first block on the form or add a GO_BLOCK command in the WHEN-NEW-FORM-INSTANCE script to navigate to that block. If necessary, you can add a GO_BLOCK command followed by SYNCHRONIZE before any commands that access the Oracle Video Control. (You can tell if the Oracle Video Control has been initialized because the video control buttons will be visible.)
it seems that oracle data reader on some client machine is case sensitive. We are using oracle 10g. 2 client machines connect to the same DB and run the same code - one works and another doesn't. they are both using odac 2.111.7.20.
this is my .NET code (which works fine on every environment it was installed in the last 2 years):
using (OracleConnection sqlConn = new OracleConnection()) { sqlConn.ConnectionString = connectionString; using (OracleCommand sqlCmd = new OracleCommand()) { sqlCmd.CommandType = CommandType.StoredProcedure; sqlCmd.CommandText = "getValues"; [code].......
this is the oracle procedure:
PROCEDURE getValues( rc IN OUT sys_refcursor ) IS BEGIN OPEN rc FOR SELECT Name, Value FROM MySchema.MyTable; END;
The problem that we saw was that on one of the client machines dr["Name"] threw exception :
Error Source: Oracle.DataAccess.Client.OracleDataReader.GetOrdinal Error Message: System.IndexOutOfRangeException: Unable to find specified column in result set at Oracle.DataAccess.Client.OracleDataReader.GetOrdinal(String name) at Oracle.DataAccess.Client.OracleDataReader.get_Item(String columnName)
We modified the code and used NAME instead of Name and it worked!! (dr["NAME"] instead of dr["Name"])
How can it be? from oracle documentation: A case-sensitive search is made to locate the specified column by its name. If this fails, then a case-insensitive search is made.
My question is what can cause such a behavior? Some ODAC/ODP definitions, .NET configuration?
I am using oracle forms10g here i have next button. So when i click the next button it will show the total volumn of record count and each record value for example 1/10 like that.
I installed a printer(HP Laserjet 3390) in UNIX(Solaris).Followed the instructions while installing as to the path it should be present for Reports to read it etc.,Also modified the uiprint.txt file with the desired .hpd file.Logging on to the UNIX machine, I am using the below command
rwrun.sh report=xyz.rdf userid=XXXX/XXX@xxx paramform=no p_orig_org='0825' desformat=pdf destype=printer desname=xxxx batch=yes This command invokes the printer and ^[%12345X@PJL @PJL SET RESOLUTION=300 @PJL SET PAGEPROTECT=OFF @PJL SET ENTER LANGUAGE=PCL ^[%1A^[E^ @PJL RESET ^[%12345X
is what it prints.Realizing that this is because of the missing parameter,tried to change paramform=yes but I am not sure how to pass the parameter.
I want to print a report to the printer directly. The main issue is that I don't want the user to save the report to prevent reprint of legal Order. Below is my code to produce 'PDF' format.
I have problem i want to to display in message all the values of block in for example when i create the fourth record the three already records are show in message..actually first i want to in message than i would populate pl/sql table. the code is at block leve when-new-reocord-instance
************************************************************ declare v_record number :=1 ; v_cur_record number; begin v_cur_record :=:system.cursor_record; [code]......
actually in block there are three record and this message should be display for the three time but the loop is executed more time.
In Sales Order Form there is a print receipt button. In current situation On Clicking the 'Print Receipt Button' it submits a XML Publisher report(PDF output) to the concurrent manager. Currently to print that report i need to go view--> requests--> view output and then print. According to my new Requirement i need to print that report directly to local printer on one simple Print receipt button click in form.
I am trying to call the printers on server using custom.pll. The report is running successfully but it is not printing output to the local printer. I need to print the report to the local printers based on responsibility. Local printers are available on apps server.
Is it possible to print the document using custom.pll? Is there any other alternative to print the report on simple button click in form.
I searched many forums but i found customizations on form level. I am trying to customize the form using custom.pll. I found many examples like URL..... but i don't think i can use these practices in custom.pll. ADD_PARAMETER & RUN_PRODUCT dont work in custom.pll. I need to complete this requirement immediately.
Environment: Apps 11.5.10.2, Forms 6i
Here is the code that i am using in my custom.pll.
if (v_form_name = 'OEXOETEL' --and v_block_name = 'LINES_SUMMARY' and name_in('parameter.ACTIONS') = 'PAYMENT_RECEIPT' )THEN l_organization_id := Name_In('PARAMETER.OE_ORGANIZATION_ID'); l_order_header_id := Name_In('ORDER.header_id'); select to_number(oe_sys_parameters.value ('SET_OF_BOOKS_ID')) into l_sob_id from dual; xml_layout := FND_REQUEST.ADD_LAYOUT('XXAFP','XXAFPOEXPMTRCRTF','en','US','PDF'); [code]....
I have no knowledge about Barcode. The problem is an issue of Loyalty Cards of a Hotel and Restaurant to various customers and then these cards will be presented by the customers time to time in the Hotel as well as Restaurant. The Owner of the Hotel and Restaurant wants to generate separate barcode for each card and when this card will be presented then the bar code reader will readout the code and the system will calculate the amount of discount/rebate. Because if the data entry operator enter the code of the card through key board the it will be a chance of leakage or misuse of that card.
DECLARE JOBSFILE UTL_FILE.FILE_TYPE; CURSOR JOBSCUR IS SELECT * -- DDOCNAME,DDOCTITLE,DSECURITYGROUP,DDOCAUTHOR,DDOCTYPE,DINDATE,PRIMARYFILE,EXTRACTIONDATE,BATCH_ID FROM TARGET_UCM ; BEGIN JOBSFILE := UTL_FILE.FOPEN('FILES','JOBS.TXT','W'); UTL_FILE.PUT_LINE(JOBSFILE,'Action = insert'); FOR REC IN JOBSCUR [code]....
is there anyway to print the values of full table .i have used all column names to print .
I'm trying to create an output statement that will show that the update was successful, but everything that I'm trying doesn't seem to be working.
I have a procedure and an anonymous block that calls on the procedure.
So far after the begin in my anonymous block I have.
BEGIN procedure_name(variable1, variable2); dbms_output.put_line('Successfully Updated'); END;
Now I know that the procedure and the anonymous block without the dbms output works as the update takes place in the table, but I can't get any text string output to confirm this.
I've 2 identical tables of 300+ columns each,and each of table is having pk as combination of 2 fields.There are some fields where data is not matching. need a query which will use these two tables and return the following-
How can i print serial no of records in sql query? I know I can achieve this with selecting rownum but it gives wrong data if used with group by like below
select rownum,deptid from emp group by rownum,deptid order by rwnum
I am creating report a using emp table .There are 14 rows in emp table , i want to print output into two pages . If i set FILTER TYPE Property to 5 ,it only shows 5 records .
I want to print data from a clob in XML format and use the following
PROCEDURE printClobOut(result IN OUT NOCOPY CLOB) is xmlstr varchar2(32767); line varchar2(32767); cnt NUMBER;
[Code]...
However the length of the clob is 13832630 which is too large for a VARCHAR2. Thus my output of line is cut off at 4000 characters. How can i increase this... Do i overlook something here in my code?