Forms :: ORA-03115 / Unsupported Network Datatype Or Representation
Dec 6, 2010
We are using 10G Forms and Reports against a 8I database (DB1) which has a link into another 8i Database (DB2).
DB2 has been upgraded to 10G. The application works fine but when I try to compile the forms in form builder I get an "ORA-03115, unsupported network datatype or representation." error.
The error occurs where the code in the form references the link directly. Other code where we created views to hide the link name works fine. BTW Same code works fine in SQL Plus 10G & Toad.
I have tried changing the type of variables & different columns but that did not work.
View 1 Replies
ADVERTISEMENT
Jan 26, 2012
I have a table containing records with a field representing a png image that is encoded as base64 text. The procedure responsible for creating the record receives the base64 information in a parameter of type CLOB. It then inserts it in a field of same type on the record. I want to transform the CLOB data into an image and display it back on the form.
View 1 Replies
View Related
Jul 6, 2013
I know I can add a check constraint for m,t,w,r,f,s,u How can I add a constraint that will allow any combination of the above. For example it would allow m or mf, or mwf Someone said it could be done with trim but I can not figure it out.
View 1 Replies
View Related
Aug 17, 2012
I would need to convert the column datatype from BLOB to CLOB. currently in the table, the BLOB column has the data. the requirement is to convert this column from BLOB to CLOB datatype.
How to convert from BLOB datatype to CLOB datatype ?
View 10 Replies
View Related
Sep 8, 2012
with ele(sno,name,state) as(select sno,name,state from sankar)delete from ele where sno=1 select sno,name,state from sankar
View 2 Replies
View Related
Dec 2, 2010
we are testing the oracle developer tools 11g and we have the followed issue.
If we run a form saved on the local disk, it's running properly but if we save the form on a local disk we get FRM-40010 Cannot read form XXXX.
Example:
TEST.fmx on C:Temp (Local disk) is running
TEST.fmx on T: (Network disk) FRM-40010
View 4 Replies
View Related
Dec 23, 2012
Oracle Back up is showing library Dell PS 6100E as unsupported device and can not retrieve any information from it, can not ping and can not verify both from obtool and web tool. Using Linux. I can ping from outside and see the device config using lsscsi. But obtool and webtool fails. Is it really unsupported ? In the
$ORACLE_Backup_Home/device/device_robots I see some PV122T, PV124T
View 2 Replies
View Related
Oct 3, 2013
I am using the HOST command within Oracle Forms 10g on Windows server to copy a pdf file from the application server to a network folder on another Windows server.
The command works fine if I logon to Windows app server and type it. But it doesn't work when it is launched within Oracle forms using HOST. The command looks as follow
net use \\FileServer\e-file /user:usergroup\username password & copy D:\RepTmp\myReport.pdf \\FileServer\e-file\test\myReport.pdf
Oracle forms doesn't give any error message at all but the pdf file never gets there. Even when I map the network folder as "R:" drive on the Windows app server, a simple copy command like this does not work with HOST:
copy D:\RepTmp\myReport.pdf r:\test\myReport.pdf
Oracle Forms server is running as "SYSTEM" on the Windows server. If HOST won't work, is there any other way to copy the file other than using fpt?
View 1 Replies
View Related
Sep 15, 2011
how I can send a message from Oracle Forms 10g to a Lantronix terminal server? It is a TCP/IP front end to a serial port controlling a warehouse carousel. We want to send a command string to a ip_address:port_number in raw mode. We have tested it using a telnet session. I develop in PL/SQL, just never used forms.
View 2 Replies
View Related
Aug 8, 2011
I am getting ORA-39726 error when a dropping a column on a non-compressed table.
SQL> select distinct TABLE_OWNER,COMPRESSION,COMPRESS_FOR from dba_tab_partitions where TABLE_NAME='STM_AE_STMT_HISTORY_DETAIL';
TABLE_OWNER COMPRESSION COMPRESS_FOR
------------------- ---------------------- -------------------
APP_SU DISABLED
SQL> ALTER TABLE APP_SU.STM_AE_STMT_HISTORY_DETAIL DROP COLUMN RATE_DESCR;
ALTER TABLE APP_SU.STM_AE_STMT_HISTORY_DETAIL DROP COLUMN RATE_DESCR
*
ERROR at line 1: ORA-39726: unsupported add/drop column operation on compressed tables
View 2 Replies
View Related
Dec 8, 2011
when i am trying to connect to the database using sqldeveloper i am not able to connect to database. its giving me an error "Unsupported Oracle database version" but with plsql developer I am able to connecting.
View 8 Replies
View Related
Aug 10, 2011
How to call a batch file existing in network path through oracle forms 6i. I am using following code in Forms 6i which is supposed to FTP some .text files to a UNIX box.
Host( '\guww.netdfs.root.Global Shared Data$(LEV)Leven Shared DataLeven Shared DataPublicCOMMONMatsEmpty Bottle ReportsSchedules Preliminaryftp_files_to_ddd.bat');
When I am running this batch file ftp_files_to_ddd.bat from local directory of my PC,it is working properly.
View 1 Replies
View Related
Jul 16, 2011
I'm facing a problem where I create a form and I want to feed time in "HH:MI" format, Firstly I choose the "Date" datatype, but during the feeding of time i.e "00:30", means if I want to feed only mints, then it doesn't accept, at the other hand if I feed "01:30" means mints with hr then it accepts.
To get rid of this problem I changed datatype "Date" to "Varchar2".
I create 3 columns on my form "TTL_WORKING_TIME" - "TTL_RUN_TIME" = "BRK_DWN_TIME". If I get any value in "BRK_DWN_TIME" column thn it has to be distribute in 3 or 4 reason of B/D, means if I get 00:30 mints brkdwn thn 00:15 mints for "reason1" and 00:15 mints for "reason2".
How I make calculation where I use "Varchar2" datatype.
View 1 Replies
View Related
Jan 11, 2012
my user is trying to drop columns, but she gets below error:
SQL Error: ORA-39726: unsupported add/drop column operation on compressed tables
39726. 00000 - "unsupported add/drop column operation on compressed tables"
i just checked whether table is compressed or not, it is not compressed it seems:
select owner, table_name,COMPRESSION,COMPRESS_FOR from dba_tables
2 where owner = 'EQUIPMENT' AND TABLE_NAME = 'ETHRNT_VRTL_CNXN_HRLY_AGG_SWP';
OWNER TABLE_NAME COMPRESS COMPRESS_FOR
------------------------------ ------------------------------ -------- ------------
EQUIPMENT ETHRNT_VRTL_CNXN_HRLY_AGG_SWP DISABLED
1 row selected. i am able to set one column as UNUSED. and then i am able to see the count accordingly from below view:
select * from DBA_UNUSED_COL_TABS
where owner ='EQUIPMENT' and table_name = 'ETHRNT_VRTL_CNXN_HRLY_AGG_SWP';
but not able to drop the unused columns. if i tried to drop a column directly from the table, that also giving above error.
View 7 Replies
View Related
Nov 2, 2011
How could we concat a clob with a char datatype.
declare
a clob;
b varchar2;
c clob;
begin
c:=a||b;
end;
When execute above code in form runtime, I get error ora-32767.
"ORA-29287: invalid maximum line size Cause: An invalid maximum line size value was specified.
Action: Correct the maximum line size to be in the range [1, 32767]."
View 3 Replies
View Related
Aug 18, 2010
I have a rather hard to trace problem which is keeping me up several days now. We want to implement a package for querying devices via SNMP in our database. There are no packages shipped with Oracle that come handy. UTL_TCP does not work because SNMP works via UDP. After all we came up with the idea to use URL.... Locally on my development machine and on the command line of the Oracle database our first prototype of the SNMP query function works very well, but inserted into the database all I'm getting is a "Request timed out". Firewall mechanisms can not be the problem because the java code runs smoothly on the command line and also a snmpwalk on the command line suceeds, so the database is not blocked by any firewall. First I thought some permission via Java are missing, but I took a look in the USER_JAVA_POLICY view and worked this with SYSDBA out. A java application in Oracle connection via TCP to port 80 and fetching a website works allright, the thing not working seems to be UDP.
View 3 Replies
View Related
Jul 23, 2013
while try to expdp on network drive. getting below error.how can we perform the expdp on network drive
Network location: \\tsclient\p\expdp
1.)SQL> show user
USER is "SYS"
SQL> create or replace directory exp as '\\tsclient\p\expdp';Directory created.
SQL>Grant read,write on directory exp to system;
2.)expdp system/xxxxx@orcl directory=exp dumpfile=EXP_orcl_072013.dmp logfile=EXP_72013_1.log schemas=('IIMS','CMMN')
Export: Release 11.2.0.2.0 - Production on Tue Jul 23 13:48:07 2013
Copyright © 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
View 2 Replies
View Related
Feb 7, 2007
I'm using Oracle10.0 as database for my project and I have installed Toad as front end tool for the Oracle. Now I want to access the database in the network using the Toad.
My question is, is it compulsory that oracle should be installed in every system to access Toad or any thing can I change in the server system to access the database from other systems in the Network.
View 1 Replies
View Related
Jul 5, 2013
I have created a batch for silent DB Creation through DBCA. I want to add a script to also create the Network Service after. I was told it can be done only with Response File.
Is a response file a script also that can be executed after the DBCA scripts? Where can I find a manual with the available commands so I can produce what I need? On the internet I find only examples for Silent DB installation.
edit-solution
Complete Solution posted as New article
[URL]..........
View 14 Replies
View Related
Mar 1, 2011
I have implement multi master replication between two server.
How much amount of data transfer over the network? How to calculate this value?
View 2 Replies
View Related
Nov 22, 2012
We want to replicate the data between the databases.We have 4 databases in a network.If there will be any change in database 1,e.g. updation in any table,it should automatically replicate on other 3 databases.or user will change something in database 2 ,it should replicate on other 3 databases and vice versa. All 4 databases have same schema and same configuration.
View 1 Replies
View Related
Aug 29, 2013
Recently we had faced network issue due to which node3 server was inaccessible.After the network issue got resolved , node3 was accessbile.So once the issue got fixed , i did a post validation in database and cluster and found listener , network1.org on node3 went offline.
When i try to start listener on node3,i got following error.
grid@RAC3 ~]$ srvctl start listener
PRCR-1079 : Failed to start resource ora.LISTENER.lsnr
CRS-2674: Start of 'ora.net1.network' on 'RAC3' failed
[grid@RAC3 ~]$ srvctl status vip -n RAC3
VIP RAC3-vip is enabled
VIP RAC3-vip is not running
[grid@RAC3 ~]$ srvctl status vip -n RAC2
VIP RAC2-vip is enabled
VIP RAC2-vip is running on node: RAC2
[grid@RAC3 ~]$ srvctl start vip -n RAC3
PRKO-2420 : VIP is already started on node(s): RAC2
[grid@RAC3 ~]$ srvctl status vip -n RAC3
VIP RAC3-vip is enabled
VIP RAC3-vip is not running
[grid@RAC3 ~]$ srvctl status nodeapps
VIP RAC1-vip is enabled
VIP RAC1-vip is running on node: RAC1
VIP RAC2-vip is enabled
VIP RAC2-vip is running on node: RAC2
VIP RAC3-vip is enabled
VIP RAC3-vip is running on node: RAC2
Network is enabled
Network is running on node: RAC1
Network is running on node: RAC2
Network is not running on node: RAC3
GSD is disabled
GSD is not running on node: RAC1
GSD is not running on node: RAC2
GSD is not running on node: RAC3
ONS is enabled
ONS daemon is running on node: RAC1
ONS daemon is running on node: RAC2
ONS daemon is not running on node: RAC3
bring up the listener on node3
View 11 Replies
View Related
Jul 5, 2013
I have created a batch for silent DB Creation through DBCA. I want to add a script to also create the Network Service after. I was told it can be done only with Response File. Is a response file a script also that can be executed after the DBCA scripts?Where can I find a manual with the available commands so I can produce what I need? On the internet I find only examples for Silent DB instalation. EDITOS is Windows 7 Oracle 11.2.0.1 I want to create the Network Service that will add these lines to the tsnames.ora.
DBNAME =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = wsName)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dbname)
)
)
on both the client and the server.How can i do it automatically through a batch script, so to add it to DBCA scripts after creation? I was told once in atopic that it could be done through a response file.
View 9 Replies
View Related
Sep 9, 2010
I am trying to set-up network encryption.I have added following parameters to my server side sqlnet.ora file:
SQLNET.ENCRYPTION_SERVER = REQUIRED
SQLNET.ENCRYPTION_CLIENT = REQUIRED
SQLNET.ENCRYPTION_TYPES_SERVER =RC4_256
SQLNET.ENCRYPTION_TYPES_CLIENT =RC4_256
SQLNET.CRYPTO_CHECKSUM_SERVER = REQUIRED
SQLNET.CRYPTO_CHECKSUM_CLIENT = REQUIRED
SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER = (MD5)
SQLNET.CRYPTO_CHECKSUM_TYPES_CLIENT = (MD5)
As per my understanding connections should start to fail from client side after addition of these parameter on server side sqlnet.ora (no changes to client side sqlnet.ora).I am still able to connect to this server without connections getting failed.
I already checked aso is installed on this database.Just to add it is a RAC database with 2 nodes.
View 4 Replies
View Related
Oct 9, 2012
We were facing some issue with crs startup and had to delete network socket files present in "/var/tmp/.oracle/".
what these "/var/tmp/.oracle/*" files do?..What informations are there in these files?
View 2 Replies
View Related
Aug 25, 2010
I have installed oracle 11g in my personal laptop, when i open the sql developer and try creating the new connection. am getting "The network adapter could not establish the connection".
View 2 Replies
View Related
Oct 29, 2010
The MS Office 'NETWORK DAYS' function allows you to subtract one date from another and return the number of 'workdays' between them. So it ignores Sat & Sun. There is an additional parameter that allows you to ignore holidays as well.
I'd like to subtract a 'Request Date' from SYSDATE and get just the number of 'workdays'.
View 3 Replies
View Related
Feb 20, 2011
I scheduled a RMAN backup job to take FULL database backup to a shared network drive.
RMAN Script used:
RMAN> run
2> {
3> allocate channel ch1 device type disk format '\\BACKUP1635\X$\ARC%U';
4> backup database plus archivelog;
5> release channel ch1;
6> }
Environment: Windows server 2003 OS and Oracle 10.2.0.4.0
Iam facing below error.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ch1 channel at 02/20/2011 18:19:46
ORA-19504: failed to create file "\\BACKUP1635\X$\ARC1BM55JL8_1_1"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
I checked shared network drive and found READ/WRITE access for me. I am able to take RMAN backup in local system without any issue.
View 4 Replies
View Related
Aug 26, 2010
I have a client program that needs to communicate with another server program. My client program is implemented in PL/SQL using utl_tcp running on Oracle 9 while the server program is a 3rd party software running on Windows server 2003.
Basically my client program needs to send a request to the server, waits for the response (wait for the incoming string which ended /w chr(3) ) and then acknowledge (sending chr(6) ).
My problem is that if I wait for the chr(3) and then acknowledge. My send routine (l_sent := utl_tcp.write_text (g_conn, p_content) will raise a Oracle generic network error. It seems like the connection is closed. I checked /w the vendor and they said it might be I am taking too long to response ( I question timeout is the problem). I have also attempted to change my read routine from read_line to read_raw but it only make things worst. I cannot even read the complete string. At least with read_line, I can read back the entire string.
My current work around is to send out the ack before I receive the chr(3) (which is not recommended by our vendor).
View 5 Replies
View Related
Apr 19, 2010
I have A Daily hot backup using Expdp Command On oracle 10g R2 installed on the Linux server. And I'm trying to move this Dump File to Another directory on Windows server 2003 over network using Ftp script which will be run after the export process finished Automatically.
View 9 Replies
View Related
