Forms :: FRM-10102 / Cannot Attach PL/SQL Library
Mar 19, 2007
FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.I am getting above error message while opening Oracle 6i Form in 10g.
I get the following Alert message when I try to attach the library to my form - Attached library name S:.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
If I select 'No', the Form compiles and runs without any error.But if I select 'Yes', I get the following error message: FRM-40039: Cannot attach library xxx while opening form.
All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
View 13 Replies
ADVERTISEMENT
Apr 1, 2010
My client is Oracle 10G DS Forms Developer. The application server is on a Solaris 64 bit sparc system. I have copied all the forms and libraries to my forms directory under C:DevSuiteHome_1forms10g_rel1 from the application server. and placed the following directory in my FORMS_PATH in the registry entry.
Now I am opening up the forms in my Forms builder and running the form. I get this error. I have the attached library in the form but I still get this error:
FRM-40039 Cannot attach a library while opening a form
View 1 Replies
View Related
Aug 31, 2010
WHEN_BUTTON_PRESS using trigger mode on button
means when i click the button to load a image from the drive c or d the of jpeg format then i select him and upload
so write down the procedure in 6i form and send me the file of fmb format to mail me
send me the file
[URL]....
View 1 Replies
View Related
Nov 2, 2011
Is there any way to connect any scanner to the Form 6i. Before someone made Fujitsu scanner Fi 5120C to work with Oracle form that if a button is pressed, the scanner will scan the document which is placed inside it and saved in DB in blob column. But now this scanner is obsolete and discontinue. I don't know how that programmer had done because I didn't find any huge coding behind that button except the HOST (default procedure) and an exe file.
PROCEDURE Do_Image (MailId IN arc_mails.mail_id%TYPE,
IMode IN VARCHAR2) IS
DepName VARCHAR2(100);
[Code]....
View 1 Replies
View Related
Dec 12, 2009
I am new to the Oracle forms,i want to attach a calender to my form. I followed the below process:
--> I have attached the LOV&Record Group of the item for which the calender is attached as ENABLE_LIST_LAMP LOV which is included in the TEMPLATE.fmb
--> Set the validate from list to 'NO' in the property palette
--> Then after in the trigger KEY_LISTVAL,wrote the code
calendar.show;
while compile the form i got an error component 'SHOW' must be declared
View 6 Replies
View Related
Oct 18, 2013
How to use the DLL? My DLL is loaded on the client host in the C: Documents and Settings USER webutil. When you try turning to the library, I get an error:
WUL-928 [CApiFunctions.set_invokeoncespec ()] EXAMPLE.DLL library is not available or does not contain a function MYFUNCTION
View 11 Replies
View Related
Jan 26, 2010
I working in windows environment and using form 6i. Everyone have used the same form and they are getting properly. But when i run the same form i am getting the following error.
PDE-DFF003: Can't Open Library : D2KWUT32.DLL
I am getting the above error when i execute the following line on when - button - pressed
w_user := Win_Api_Environment.Get_Windows_username(False)
View 1 Replies
View Related
Jan 29, 2013
I have one procedure "PROC_A" in LibraryA, Is it possible to call this procedure PROC_A from LibraryB.
View 1 Replies
View Related
Jan 25, 2010
I am using forms 6i with 10g data base. i have compiled a form in developer 6i after that when i open *.fmb file it is showing PDE-PLI018 Could Not find Library "form name". i have not attached any library in form.
View 4 Replies
View Related
May 24, 2010
Am using Oracle 10g Forms and Databse.
My form Consists data block blk_user with two items username and password
Both user name and Password are required Fields.
When user left these items Empty To show Alert
I Created Below Procedure and Called in Form_Level ON-ERROR Trigger.
PROCEDURE pcd_io_alert IS
itm_name VARCHAR2(20);
BEGIN
[Code].....
how to call or create this procedure as Library functions and call the created library in form To Show Alert. Actually I want to create library functions to Validate and Show Alert Mesages.
View 1 Replies
View Related
Jun 24, 2013
I have a date field in my form (date.start_time) in which I want to reference in a library and add 5 mins to the time (since its in the lib I am coding this I need to use name_in ). My current code is:
copy(name_in('date.start_datetime')+5/24/60 , 'DATE.END_DATETIME')
However, this seems to be erroring.
View 2 Replies
View Related
Jun 5, 2013
I would like to know if it's possible to use PIPELINED return inside a custom library with Oracle Forms Builder? For now, i try to use it, but i get error about client side.
my code.
PACKAGE TEST IS
TYPE measure_record IS RECORD(
l4_id VARCHAR2(50),
l6_id VARCHAR2(50),
[code].......
the body compile, but not the other part. I would like after call the select * from test.get_ups(0); with a cursor into another function.
View 3 Replies
View Related
Mar 17, 2011
I've a procedure let us say SALES_PROC on Form Level and same procedure in Library and in Database also.
-How to call SALES_PROC created at Form Level?
-How to call SALES_PROC created at Library Level (.PLL)?
-How to call SALES_PROC created as stored procedure in Database?
View 5 Replies
View Related
Feb 7, 2012
I want to attache an external file to a email using UTL_SMTP package.
A file which attach will be present in directory.
View 3 Replies
View Related
Apr 5, 2011
I can send mail with UTL_MAIL using this:
CREATE OR REPLACE PROCEDURE send_mail_file_seti IS
BEGIN
UTL_MAIL.SEND_ATTACH_VARCHAR2(
sender => 'mail@from.com',
recipients => 'mail@to.com',
message => '<HTML><BODY>See attachment</BODY></HTML>',
[code]........
What I want to do is send mail attaching a file from file system. For example, I have this file:
/oracle/pmp/file
I want to send it using a procedure like the one above.
View 6 Replies
View Related
Oct 11, 2012
we are having a test server in bank environment.
Details:
IBM p series servers
AIX 5.3
Server memory : 16G
there are 2 instances on this server.
1. Near DR - 9840M
2. Test server - 1344M
Rest is for server.
Oracle 10.2.0.3.0 - Production
2 days ago we are running a stored procedure on this test server. After some time DB gave this error and stored procedure stopped.After that we were unable to login through Oracle Client Software. Whenever we try to login to this DB through client software, it gives following errors.
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
IBM AIX RISC System /6000 Error: 13: Permission denied
We tried to shut the DR database and then login but still gives error..
View 11 Replies
View Related
Aug 3, 2012
I have an .xls file which needs to be the last page of an rdf report. I would prefer to not type up the contents of the file and lay them out. Is there some way I can link this to the footer section or any other alternative?
View 2 Replies
View Related
Aug 20, 2013
I have issue with application ,When I am trying to upload any a csv file of 3 MB in email through apexIts only uploading 32Kb of data remaining is ignoring for more then 32kbMay I know why this issue is and is there any process or methods to track this. I am using the apex version (Application Express 4.1.1.00.23).
View 2 Replies
View Related
Jun 30, 2011
At a customers site I see lot of long lasting library cache locks during a complex ETL run. Several Sessions run in parallel and create Database tables with dynamic sql ( CREATE TABLE AS SELECT ....) .
Sometimes these procedures wait for each other with wait event 'Library Cache' . I presume that this is a side effect of the dynamic DDL in the stored procedures. Is that possible even when the Procs create different Tables but reference the same tables in their SELECT clauses ?
I presume that this is plausible but I need some arguments to convince my colleagues.
View 1 Replies
View Related
Jul 6, 2010
very new to Oracle. how to generate the library
View 7 Replies
View Related
Nov 1, 2012
I am using Apex 4.1.0 with Oracle 11gR2 and Oracle App Server (mod_plsql). I'm trying to incorporate the d3.js library (a visualization framework) in my Apex charts but am not having much success.
I found this article in which David Mann uses the library within an Apex 4.x application:
[URL].....
I replicated his exact steps in my own application but without success. I do not see how he was able to get his application to work. Indeed, the tutorial does not even use a dynamic action despite what the article title says.
Has any one used the d3.js library with their Apex application. If so, would you be willing to share how you went about it?
View 8 Replies
View Related
Dec 1, 2008
I'm currently new to Oracle 10g SQL and I need to query a large library file.I need to find the different first keywords associated with references written by authors who have more than 10 references in the readings table.
View 4 Replies
View Related
Mar 18, 2011
in spotlight toad tool alarm appears about sql library miss rate 61,2%
View 15 Replies
View Related
Nov 21, 2012
We are getting below error....Our one package called orawpcom.dll library file.
ERROR at line 1:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to find library
'/oracle9i/app/product/11.1.0.7.0inorawpcom.dll'.
ORA-06512: at "GFSAM.OAINVOKEDOUBLE", line 1
ORA-06512: at "GFSAM.ORDCOM", line 229
ORA-06512: at "GFSAM.ORDEXCELSB", line 450
ORA-06512: at line 43
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to find library
Attach this orawpcom.dll file?
View 1 Replies
View Related
Oct 23, 2013
When I try to start lampp, I am getting the below error.
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/oci8.so' - libclntsh.so.10.1: cannot open shared object file: No such file or directory in Unknown on line 0
But I have libclntsh.so.11.1 in my system. Why it is searching for libclntsh.so.10.1?
View 3 Replies
View Related
May 24, 2011
I take backup database with RMAN utility . Now without any third-party software I want to take backup database with RMAN utility and put on TAPE LIBRARY TS3100 . and I got error message.plz guide me how to configure TAPE library for RMAN
RMAN> run {
2> allocate channel stb1 device type stb format '/dev/IBMtape0/Full_dwhtest2_%T_%s';
3> backup ( database include current controlfile );
4> backup format '/dev/IBMtape0/Arc_dwhtest2_%T_%s' ( archivelog all);
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on stb1 channel at 05/22/2011 19:47:14
ORA-19554: error allocating device, device type: STB, device name:
ORA-27001: unsupported device type
View 7 Replies
View Related
May 18, 2011
i am creating a library management system using struts 2.i have a form that display a table having column(bookname, author, publisher,..etc) and it contains an operation "edit book" with each row. now i m stuck with an update query(or any other query) by which i can edit an entire row (or any column) onclicking the edit button.i'm using oracle 10g database.
View 2 Replies
View Related
Jun 30, 2012
i just run the command
RMAN> crosscheck backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of crosscheck command at 06/30/2012 14:25:12
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
RMAN> configure default device type to disk;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
[code]....
View 2 Replies
View Related
Sep 6, 2012
There are only OCI headers in 9.2.0/rdbms/demo directory in our installation of Oracle 9.2:
9.2.0/rdbms/demo/ocixad.h
9.2.0/rdbms/demo/oci.h
9.2.0/rdbms/demo/oci1.h
...
In Oracle 10.2 installation there are OCI headers in rdbms/public directory:
10.2.0/rdbms/public/ocidem.h
10.2.0/rdbms/public/ocidfn.h
10.2.0/rdbms/public/ocikpr.h
10.2.0/rdbms/public/oci.h
10.2.0/rdbms/public/oci1.h
...
What should be installed additionally to have OCI headers in rdbms/public in Oracle 9.2.0?
View 0 Replies
View Related
May 13, 2005
my Multithread-Program hangs in an oracle library while passing a prepare statement (also if i try an EXEC SQL SELECT statement...). Something seems to be wrong in the Program, but i cant's find the Error.The Program is build with:
proc parse=none code=cpp mode=oracle hold_cursor=yes maxopencursors=20 THREADS=YES sqlcheck=full iname=Precomp_all.pc oname=Precomp_all.h
problem: a first thread creates the connection to oracle with one global context (type sql_context) in the connection object:
connect()
{
EXEC SQL WHENEVER SQLERROR DO ORASQL_ERROR();
EXEC SQL WHENEVER SQLWARNING DO ORASQL_WARNING();
EXEC SQL WHENEVER NOTFOUND DO ORASQL_NOP();
[code]....
View 3 Replies
View Related
