Backup & Recovery :: RMAN And TAPE Library TS3100?
May 24, 2011
I take backup database with RMAN utility . Now without any third-party software I want to take backup database with RMAN utility and put on TAPE LIBRARY TS3100 . and I got error message.plz guide me how to configure TAPE library for RMAN
RMAN> run {
2> allocate channel stb1 device type stb format '/dev/IBMtape0/Full_dwhtest2_%T_%s';
3> backup ( database include current controlfile );
4> backup format '/dev/IBMtape0/Arc_dwhtest2_%T_%s' ( archivelog all);
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on stb1 channel at 05/22/2011 19:47:14
ORA-19554: error allocating device, device type: STB, device name:
ORA-27001: unsupported device type
View 7 Replies
ADVERTISEMENT
Oct 29, 2011
Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
View 7 Replies
View Related
Nov 16, 2011
Is the crosscheck command suppose to be able to clear catalog entries that are on tape? If so, explain why I still have entries for 11/14/2011 13:28:32 when the current date is 11/16/2011 11:17:45 and I have a retenion policy of 1 day?
This is a test system where I am testing backup to tape... Icurrently disabled the backup to tape and now backing up to disk.
RMAN> show all;
RMAN configuration parameters for database with db_unique_name OTAPDEV are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF;
[code]...
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ -------------------
77333 Full 3.09G SBT_TAPE 00:03:05 11-14-2011 13:28:32
BP Key: 77339 Status: AVAILABLE Compressed: NO Tag: TAG_1111141325
[code]...
View 3 Replies
View Related
Aug 12, 2010
We usually copy backuppeice from disk to tape usig RMAN.Is there any option to copy the backupeice from tape to disk.
View 17 Replies
View Related
Oct 8, 2011
I want to configure rman backup for oracle 9i database on hp tape drive. Db is running in RHEL.
View 6 Replies
View Related
Jan 3, 2013
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
get the following error when i do this,
RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45
ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
View 1 Replies
View Related
Aug 19, 2012
I have RMAN backup on TAPE. I need to restore control file for particular date on another host. How do I restore control file to new host for particular date?
EXAMPLE:
4949 Full 11.25M SBT_TAPE 00:01:09 06-AUG-12
BP Key: 4949 Status: AVAILABLE Compressed: NO Tag: TAG20120806T223455
Handle: COTSPRD_c-4007601229-20120806-00 Media: 030256
SPFILE Included: Modification time: 28-MAR-12
SPFILE db_unique_name: COTSPRD
Control File Included: Ckp SCN: 237324864 Ckp time: 06-AUG-12
Can I rrun command like :
RESTORE CONTROLFILE FROM TAG 'TAG20120806T223455;
I need to clone from tape to another server for particular date.
View 3 Replies
View Related
Dec 16, 2012
what is the meaning of 'SBT_TAPE' in the following command in RMAN? In the following command, does it refer to a tape drive, or a hard disk backup?
allocate channel t1 type 'SBT_TAPE' parms
'ENV=(NSR_SERVER=<a backup server server name>,NSR_CLIENT=<a oracle server>,NSR_DATA_VOLUME_POOL=ORACLE ARCHIVE LOG)';
View 1 Replies
View Related
Oct 6, 2011
db environment: 11g
recovery catalog: 10g
I am trying to find if there is a way to know how much data has been written on tape on a 'in progress' rman backup. rman session is also connected with recovery catalog.
is there a way to find-out how much data is transferred per rman channel onto tape? what is backup speed we are getting?
View 1 Replies
View Related
Nov 7, 2013
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.So surely the requesting backup is behind retention date and has been pushed to tape.
View 1 Replies
View Related
May 9, 2011
We are trying to restore a database to a cold backup DBID.However while our datafiles were backuped up for 6 months retention we found out subsequent delete obsolete command wiped out the Control file related to this backup piece..Now what is left with this backup piece is just datafiles..
Can we still recover the database with a subsequent controlfile autobackup for the same DBID.?
View 2 Replies
View Related
Jun 30, 2012
i just run the command
RMAN> crosscheck backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of crosscheck command at 06/30/2012 14:25:12
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
RMAN> configure default device type to disk;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # defa
[code]....
View 2 Replies
View Related
Feb 10, 2011
We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
View 11 Replies
View Related
Oct 18, 2011
I have problem on using "delete obsolete" in RMAN.
First, let describe my backup configuration.
1. Full backup every Monday (17-Oct, 10-Oct, 3-Oct, 26-Sep)
2. Incremental backup for other days
3. Enable autobackup of control file
4. Backup archive log every day
5. RETENTION POLICY TO RECOVERY WINDOW OF 30 DAYS
6. Execute "Delete obsolete" every day
7. control file is used instead of catalog
The results observed:
1. Backup of control files older than 30 days will be deleted
2. Backup of archive log files older than 30 days will be deleted.
3. Backup of datafiles older than ~14 days but before 30 days are also DELETED.
In my example, the backup of datafiles created at 26-Sep is deleted at 16-Oct.
I tried "restore database validate until time "sysdate-22"" at 17-Oct. And RMAN reported "datafile xx will be created automatically during restore operation". It seems that RMAN failed to do restoration up to 22 days ago. The retention policy I set seems not effective on datafile backups.
I checked view v$backup_set and the "Keep" is "No" and "Keep until" is empty.
The only thing I can think of, is the settings of "CONTROL_FILE_RECORD_KEEP_TIME". It is marked "7" in the Oracle, which is less than the retention. But I suppose this only causes the backup not deleted, but NOT be deleted earlier.
View 6 Replies
View Related
Oct 18, 2012
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies
View Related
Jan 24, 2011
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
View 17 Replies
View Related
Aug 13, 2013
My scenario is: database is in archivelog mode.
I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.
I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database
( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)
Next tried to :
recover database archivelog tag 'DLYTUE'
( same outcome )
What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..
I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.
View 9 Replies
View Related
Feb 11, 2011
I have recently patched my catalog home to 9208 from 9204; the target database is still on 9204 but now I cannot connect to the catalog database.
oracle@mogw:TES1:/u01/app/oracle/admin/TES1/bdump
rman rcvcat rman/rman@RMANDB
Recovery Manager: Release 9.2.0.4.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
[code]...
View 11 Replies
View Related
Jun 25, 2013
While connecting to target database from stand database. I am getting below error.
calhost dbs]$ sqlplus system/oracle@proddb
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:10 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[standdb@localhost dbs]$ rman target system/oracle@proddb auxiliary system/oracle@standdb
Recovery Manager: Release 10.2.0.1.0 - Production on Sat Jun 22 00:18:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
View 7 Replies
View Related
Sep 30, 2012
how to duplicate it on oracle 11g xe windows 2003
i have read from documentation but getting some error.
in last
E:Documents and SettingsAdministrator>rman
Recovery Manager: Release 11.2.0.2.0 - Production on Sun Sep 30 03:03:09 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect auxiliary sys/12
connected to auxiliary database: XE (not mounted)
RMAN>
RMAN> DUPLICATE DATABASE TO xe
[code]...
Backup-Based Duplication Without a Target and a Recovery Catalog Connection?
View 6 Replies
View Related
Jan 4, 2012
when i performed incomplete recovery i try to set until time but it shows RMAN-20207:until time or recovery window shoubld be before resetlogs.
View 3 Replies
View Related
Jan 1, 2012
REGISTER DATABASE;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 01/01/2012 11:02:40
RMAN-06428: recovery catalog is not installed
View 4 Replies
View Related
Feb 7, 2011
I have a doubt regarding the process the RMAN follows for restore and recovery of the database.
My Level 0 full backup completes on Saturdays at around 11 am after taking 8 hours (It starts at 3am).On Sunday, I ask RMAN to restore (on a different box) till Saturday 11:30 am.Then, after the restore is successful, I recover it till 11:45 am.
The recovery also goes fine and Iam able to clone to test box.
Till what time is the database restored? I assume its till 11 am since the L0 backup finishes at 11 am though I have asked it to restore till 11:30 am
During the recovery, ONLY the archives generated between Saturday 3 am and till the time i asked for recovery (Saturday 11:45 am ) are required. But, checking the recovery log file, i was surprised to see that RMAN has restored archive files starting from Friday 9:30 pm (Much before the time the Level 0 backup even started).
why does RMAN require the old archive log files.
View 4 Replies
View Related
Feb 26, 2012
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
View 1 Replies
View Related
Dec 22, 2012
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
View 2 Replies
View Related
Jan 28, 2011
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
View 13 Replies
View Related
Feb 9, 2011
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies
View Related
Jan 8, 2013
Is this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
View 1 Replies
View Related
Jan 8, 2013
Does the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
View 2 Replies
View Related
Mar 19, 2009
Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
View 2 Replies
View Related
