I have a master detail form based on two tables and i want to save the record automatically when the user exits the last field.how i can do it.which trigger is appropriate and what is the code.
View 8 Repliesi made this loop to commit the same item but depend on the count of suppliers to set the same item every time to different supplier . but the problem this code commit only the first sypplier but not any othere one ..
code : { key - commit - trigger }
declare
var_record_count number ;
VAR_p_request number;
begin
var_record_count:= get_block_property('control',CURRENT_RECORD);
[code]....
I'm getting some problem in my project. I've taken my form fields in tabular way. I also have the ID with auto-increment system there. I want that when user moves towards the 2nd row for inserting new record then the 1st record would be committed.
I'm getting my bank-id from database and making +1 increment and made that bank-id text box into display box.
When running my form then it is increasing one like this :
database record
BKID-00001
and with one increment it is showing this in my form display field of 1st row in tabular form.
BKID-00002
but when I moves towards the 2nd row it doesn't commits the form and gives the BANK-ID AS "BKID-00002" again like the above row.
I have a form reading record information from a flat file and inserting data into a number of varied tables. At the end of file (last line read) the form issues a commit to make all inserts/updates permanent.
There is a record that disappears in particular and this everytime I re-run the test. I mean than in Debug mode, I find it in the right table everytime I query that table until the moment the commit is issued in the code - which is definitely the opposite of what should happen. I understand that for some reason a rollback happens for that record (others are ok after the commit) but my point is that if for some constraint reasons, the record did not qualify, an error should have popped up right from the Insert that added that record, right? Then How comes I find it in the table up until the moment of the commit ?? ...is the deferrable constraint property a clue for digging further?
when a user change or delete any record or row in forms data automatically move to other table because i want to compare old and new record.
View 8 Replies View RelatedI am calling one procedure through job and after submitting the job i am using commit. problem is when job close the session it commit the code which is inside procedure and as per my understanding in another session also, which i want to avoid .
my procedure is
Create My_proc is
Begin
Insert into my_table values(1,2,3);
End;
And my job proc is
Create my_job_proc is
Begin
dbms_job.submit(jobno,'my_proc;',sysdate,null,null,false);
commit;
End;
now i am calling my job proc is
Declare
Begin
my_job_proc;
End;
Now problem is once it finish, it will insert the data into my_table which i don't want until I call Commit.I already try 'Set autocommit off'
I have created a sql loader control file to load a delimeter file in a table.
The file gets loaded into the table properly, however the commit is happening for every 64 records.
My aim is to rise the commit count by 1000 records.
I am calling a child form from a parent form.It works perfectly if the parent form is adding records and while entering records when i press the button to call the child form, the whole things work perfectly according to plan.
The problem begins when i run execute query command in the parent form and then call child form then it does not "commit_form". So this is my problem that child form does not work perfectly when parent form is being called in execute_query procedure.
My working:
1) I read in the documentation that When parent form status is query_only then child will also have the same mode regardless of the parameter given in call_form.So i checked the :SYSTEM.FORM_STATUS of both the parents and child form,it shows "CHANGED" hence this point is covered. (dont know how come the parent form is in changed status but at least it is doing my work)
2) I further read and found that Commit_form procedure make the :SYSTEM.FORM_STATUS as QUERY. Here i am facing problem as in child form when i make changes and press commit form. Then before commit_form and after commit_form the :SYSTEM.FORM_STATUS results in "CHANGED".You can see this in the following code which i have written in save button.
message(:SYSTEM.CURRENT_FORM || ' a ' ||:SYSTEM.FORM_STATUS); pause;
commit_form;
message(:SYSTEM.CURRENT_FORM || ' b ' ||:SYSTEM.FORM_STATUS); pause;
IF Form_Success THEN
Commit;
IF :System.Form_Status <> 'QUERY' THEN
Message('Error prevented Commit');
RAISE Form_Trigger_Failure;
END IF;
else
message('FAIL');
END IF;
exit_form;
then at last exit_form module shows that" i have unsaved data in the form" save Yes-No-Cancel?
After committing form i want to clear few item and retain few item and make the form ready for next record to be inserted along with retained item.
View 4 Replies View RelatedI have a problem with key-commit trigger. I have written some validations and computations criteria on the block level (lines level). Actually there are a number of loops involved in it.
Problem is that the computations are performed twice. (may be the validations would also be performed twice, which couldn't be felt ). Since i read somewhere that key-commit is fired on different events, which i infered to be firing only just before database commit.
Is it possible to clear the form after a successful commit? In order to avoid the user from double posting of record by making double commit.
View 17 Replies View Relatedhow we can sum data with out commit command in forms
View 3 Replies View RelatedMy procedure proc_ex is in when_validate_item trigger
I have one Multi Record data block in my form with values in its items
I need to Populate multi record block values to one Record Group using
add_group_row,
add_group_column,
set_group_char_cell to populate values to record group
Let us suppose my multi record data block looks like
item1 item2 item3 item4
10 20 50 70
25 15 30 45
45 90 47 38
75 25 85 90
30 56 78 80
how to populate these multi record datablock values to Record Group ???..Eagerly waiting for your Replies
Restrict field after insertion before commit. i mean when user inputs the data in one field and moves to next field.when ever he want to return back on the previous field it can't be edited.before commit;
View 2 Replies View RelatedI am just making a audit table as well. i have learnt the basics from here URL.....
My problem is that after inserting into audit table if i issue commit command then the table + unsaved data present on the form is also saved.What i want is that i issue a command which save only inserted record in audit table, and should NOT save data present on the data entry form. (which will be saved later by other method/button).
I have a four tab canvas. The first 3 tabs belong to one data block. The last tab has two data blocks.
How can I automatically commit changes if the user clicks on any tab and not necessarily in tab order?
How to change tab page automatically?I have two tabs.in first tab i have placed one button if i press this button first tab should be changed into second tab?
View 1 Replies View RelatedHow can I remove (record asved) message that come automatically after commit??
View 5 Replies View RelatedAfter compiling in few minutes My Oracle Forms 6i Form is exiting automatically ... How to solve this problem.
View 1 Replies View RelatedI have a fairly standard Purchase Order form which contains pre-loaded data (been uploaded from an XML file).When the Purchase Order is processed, the form updates a Price History table only if the Price on the PO_Details changes.The code for updating the price history table is contained in a PRE_UPDATE trigger on the PO_Details Data Block.
No other data changes on the PO_Details table.I now want to change this so that the Price History table is updated even if the price does not change i.e I want to create a history record for each record on the PO_Details irrespective of whether it was updated or not.
Is there an alternative trigger that I can move my code to (ie move it from PRE_UPDATE) to some other trigger that is fired for each PO_Details record even if there is no change.
I create a data block on a table when I am inserting new record only one record have been saved. Last record no longer exist.
View 4 Replies View Related I have created a datablock and set up the user interface to allow the users to insert all the data they need, however my table has some fields which should be generated automatically and are not done through user input:
id - which is uniqe to each entry to the table so is gernerate by a sequence (which I created on the database) but when i put seq.nextval into the initial value on the datablock it says i cannot do this, so how do I use the sequence to insert the value into that field in the database. This is my primary key in my database whichobviosuly my users cant input data to, instead it is generated automatically.
User - similarly in the datablock is a user field which states the user that inserted that record, I know on the database i can put DEFAULT user for that field , but how do I make the user insert automatically through forms.
Date - Similarly again how do I set SYSDATE to be automatically input to the date field when the user submits the record?
How Can We Stop to insert Data if Master Block have the record and detail block have no record but commit command applied i want that commit command can not be work if detail block have no record
View 7 Replies View Relatedi have emp table of 5 columns empno,ename,dept,sal,edit_timing(edit timing datatype is timestamp).and my form contains empno,ename,dept,sal. is if i insert a record into forms it automatically insert the date and timing into edit_timing columns.
View 2 Replies View RelatedI have a scroll bar in my form. When i scroll the bar, one of SUBMIT buttons which is disabled gets enabled automatically. Do we have any triggers on scroll bar where i can disable the button again.
View 4 Replies View RelatedI have one multi record block in that i have one LOV..If i choose lov in first record that won't be display in second record lov...
View 4 Replies View Relatedi have create database link with msaccess2000 its working fine in forms 6i i am trying to upload data by using forms 6i while compiling form is automatically closed my code is this
begin
insert into baba1
(select *
from baba1@access_db
where dte between to_date(:block3.fdate,'dd-mon-yyyy')
and to_date(:block3.ldate,'dd-mon-yyyy')
[code]....
I have two control block i.e. class_register and student_info. In which student_info is multi-record block which contains stud_id, stud_name, stud_roll_no. Based on the class_register block, stud_id and stud_name is generated in the student_info table. Now I want to generate stud_roll_no automatically until the last record is present.
View 4 Replies View RelatedI need is to generate this chart automatically from the form builder without opening any program like visio (for instant). that's mean when I select the wanted department the chart will be generated automatically .
View 9 Replies View RelatedI have a LOV in a custom oracle forms.this lov is linked to a record group.
Presently the column on which lov is created does not contain any value.
I want to insert value into the lov through the forms.
I am not able to insert data into it through forms