when i am executing the procedure, i am getting the below error.
I have added below lines in the procedure.
DBMS_OUTPUT.ENABLE(100000);
Even though i am getting the error.
ORA-20000: ORU-10027: buffer overflow, limit of 100000 bytes
ORA-06512: at "SYS.DBMS_OUTPUT", line 32
ORA-06512: at "SYS.DBMS_OUTPUT", line 97
ORA-06512: at "SYS.DBMS_OUTPUT", line 112
ORA-06512: at "Procedure name", line 199
ORA-06512: at line 1
20000. 00000 - "%s"
*Cause: The stored procedure 'raise_application_error' was called which causes this error to be generated.
*Action: Correct the problem as described in the error message or contact the application administrator or DBA for more information.
I am running script which drop all public synonyms and create private synonyms for all eligible objects. I am passing value to procedure through cursor and I am using dbms_output.
ERROR at line 1: ORA-20000: ORU-10027: buffer overflow, limit of 999999 bytes ORA-06512: at "SYS.DBMS_OUTPUT", line 32 ORA-06512: at "SYS.DBMS_OUTPUT", line 97 ORA-06512: at "SYS.DBMS_OUTPUT", line 112 ORA-06512: at line 101
I read that by: SET SERVEROUTPUT ON SIZE unlimited would resolve this problem.
What are the effects?Do I need to check any disk space, or any effect on the memory?
SQL> ed Wrote file afiedt.buf 1 begin 2 for i in 3159572060..3159572274 loop 3 insert into recmsisdn(msisdn) 4 values(i); 5 end loop; 6* end; 7 / begin * ERROR at line 1: ORA-01426: numeric overflow ORA-06512: at line 2
when a procedure, package or function is executed which part of oracle code gets loaded, where the values of the variables are stored etc. When a package is loaded in the memory does specification and body both gets loaded?
How can I found how much memory is required to execute a procedure? consider oracle architecture (SGA, PGA, UGA etc.)
I am using oracle 9.2.0.8 on RHEL 4.8 (64-bit). I am facing a strange problem. I have this one job in database that takes almost 12-15 minutes to execute but when I execute procedure in that job manually, it executes in one minute. Even when no other job is running in database, it takes more than 10 minutes to execute.
I created the following procedure in my local database.When I executed the procedure SEND_MAIL, recipient is not receiving mail.Do I need any setup in my database?
here is my procedure. CREATE OR REPLACE PROCEDURE SEND_MAIL ( msg_to varchar2, msg_subject varchar2, msg_text varchar2 ) IS c utl_smtp.connection; rc integer; msg_from varchar2(50) := 'Oracle11.2'; mailhost VARCHAR2(30) := '10.137.133.18'; -- local database host [code]....
I am using oracle 9.2.0.8 on RHEL 4.8 (64-bit). I have this one job in database that takes almost 12-15 minutes to execute but when I execute procedure in that job manually, it executes in one minute. Even when no other job is running in database, it takes more than 10 minutes to execute.
I cerated a function with two date parameters. I am using these parameters in query. The function created successfully.But when i executed this function, it throw following error:
ORA-01840: input value not long enough for date format in function
I searched on internet, but not found the proper solution. n with example.Table column is varchar2 type and values store in 'RRRR/MM/DD' format.
Does cache buffer chain latch and buffer busy wait event are related to one any another.
Latch definition from Google says : Latches are simple, low-level serialization mechanisms to protect shared data structures in the system global area (SGA).
what does it mean my protect. Does this mean protects from aging as per LRU algorithm and getting removed from SGA or protect from other processes ,say from example from simultaneously DML operations. or both
Does buffer busy wait event occurs , because of the cache buffer chain latch ?
when I want to create a table.When I run my procedure I received : PL/SQL: numeric or value error: character string buffer too small
create or replace PROCEDURE p_create_tmp_tables (p_result OUT NUMBER ) IS string_sql varchar2(1000); result NUMBER; BEGIN string_sql := 'CREATE TABLE TMP_CATEGORIES (CODE_CATEGORY NUMBER(6,0), NAME_CATEGORY VARCHAR2(25 BYTE))'; execute immediate string_sql; [code]...
I want to pass a damn long query(which includes a lot of column names, tables, joins, union, where clauses etc. and whose length is more than 120000) in a Ref cursor (that's length is more than 32767). Query is stored in a LONG type variable V_QRY in stored procedure, and I am opening that ref cursor like below-
OPEN P_RPT_TEST FOR V_QRY;
at run time its giveing string buffer too small error.
begin -- Initialize owa with an empty array, just so we can use htp. owa.init_cgi_env( param_val=>owa.cgi_var_name ); -- Add a header to avoid dealing with header-related code in htp. htp.prn('Content-Type:text/plain'); htp.print('');
[code]....
The error I am getting is
ERROR at line 1: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "SYS.HTP", line 1550 ORA-06512: at line 32
what i feel is that oracle Database UTF8 or AL32UTF8 characterset does not support htp package properly. When i run the code on another characterset, it runs errorfree except in UTF8 or AL32UTF8.
Actually I am getting the following error while running my script.
Error:(Error): ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 9
Seems to be getting eror in the following line but not sure why its coming."select adary.dilution_strategy_seq.NEXTVAL into :dil_strat_seq_new from dual;"
Code snippet: --------------------------------------------------------------- declare dil_strat_seq_new NUMBER :=0; disc_conc_seq_new NUMBER :=0; disc_fold_seq_new NUMBER :=0; begin
ORA-06502 numeric or value error: character string buffer too small ORA-06512 itw_item_add_ch at line 17
CREATE OR REPLACE procedure itw_item_add_ch (header_id1 number, folio out varchar2,tariff out varchar2) as cursor item_add(header_id1 number) is SELECT DISTINCT c.attribute4 item_tariff_no, c.attribute5 item_folio FROM OE_ORDER_LINES_ALL b,
Following are my declarations and query inside my procedure.i am getting "ORA-06502: PL/SQL: numeric or value error: character string buffer too smal" error when i try to execute the procedure
I am learning pl/sql and this is procedure i had created which got created successfully.then i created two variables name v_name, v_loc with command.
variable v_name varchar2; etc. and executed procedure like execute dept_proc2(10, :v_name, :v_loc); and i am getting the error
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
1 create or replace procedure dept_proc2 2 (v_dno in number, v_name out varchar2, v_loc out varchar2) 3 is 4 cursor dept_cur is select dname, loc from dept 5 where deptno=v_dno; [code]...
Actually I have an existing table in LOG RAW instead of BLOB. Which stores some transaction XML data. The data is very huge. When i trying with the following, gives me following error
SQL> declare 2 a varchar(255); 3 B LONG RAW; 4 cursor c1 is select xml FROM LOG_tab WHERE ID='13148' ; 5 begin 6 open c1; 7 loop 8 fetch c1 into b ;
[code]....
ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 10
Since dbms_output.put_line has buffer limitation.Can we write the result of a select statement into client LOCAL disk files using PL/SQL.
I am getting an error as below ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
Here is complete code
CREATE OR REPLACE TYPE MDI.ACCUM_STRING_TYPE2 AS OBJECT ( rvalue VARCHAR2 (32767 STATIC FUNCTION odciaggregateinitialize (sctx IN OUT accum_string_type2) RETURN NUMBER
Trying to learn and understand Triggers, PL/SQL code, etc. When I execute a simple insert using Toad for Oracle, all is fine. When I try the identical insert in SQL*Plus, it throws error ORA-06502 during execution of the trigger.
Here is the error info:
insert into AAAJOB(PROCEDURENAME,DESCRIPTION) VALUES('OOO','PPP') * ERROR at line 1: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "PMSC0.AAAJOB_TIMING", line 10 ORA-04088: error during execution of trigger 'PMSC0.AAAJOB_TIMING' ===
I am writing a query and the query is resulting in Numeric Overflow.
SELECT
(power((Trlg_5Yr_Anl_Ror_Pt/100+1),5)-1)*100 AS Trlg_5Yr_Cum_Ror_Pt
FROM Cdp where .... and .....
In this above query,the power function is throwing error. Since the value in the column "Trlg_5Yr_Anl_Ror_Pt" is very big,applying power function is throwing Numeric Error. What can I do to handle this?
IN TABLE Cdp,column "Trlg_5Yr_Anl_Ror_Pt" is defined as NUMBER. Will Changin it to FLOAT resolve the issue.
i am new to oracle,when i am compiling below procedure,
create or replace procedure GetTempPolicyDetails2(i_officeid in number,pr_cursor out SYS_REFCURSOR) as
L_QUEY VARCHAR2(4000):= 'select POLTMP.POLICY_ID,POLTMP.CORPORATE_NAME,POLTMP.POLICY_FROM_DATE,POLTMP.POLICY_TO_DATE, POLTMP.NETPREMIUM_WITH_SERVICE_TAX, IOF.OFFICENAME,UW.NAME,REG.REGNAME,brmstr.brokername,created_on from policies_temp POLTMP INNER JOIN ISSUINGOFFICE IOF ON IOF.ID=POLTMP.Divisionid INNER JOIN REGION REG ON REG.ID=IOF.RID INNER JOIN underwriters UW ON UW.ID=REG.UWID LEFT OUTER JOIN broker_master BRMSTR ON BRMSTR.ID=POLTMP.Broker_Name where POLTMP.Policy_Status=1 where 1=1' L_WHERE VARCHAR2(4000):='WHERE 1=1'; [code]....
I am having 3 procedures a,b,c. Procedure a is calling b,procedure b is calling c, and procedure c is calling procedure a.There is compilation error in procedure a but while compiling it is saying dependent procedure is uncompiled.
I'm getting the following error on a procedure that I was able to compile until today after some changes.
ORA-06550: line 354, column 20: PLS-00103: Encountered the symbol "AND" when expecting one of the following: . then or The symbol ". was inserted before "AND" to continue.
