How can I tell version of exadata machine I'm connected to? Mean whether X2, X3-2. X3-8 ....
example: machinemodel=X2-2 Full rack A file named config.dat is mentioned in this doc [URL]
but I could not find that file on server I'm connected to (DB Host)
Any command, file I could use to get machinemodel?
One of my databases which is running on exadata x2-2 , has been restored to non-exadata machine in order to test few things. I had a sub-partition table in the exadata , compressed for query high. test machine (NOT EXADATA) , after uncompressing this subpartiton tables i am getting the following err message :
ORA-64307: hybrid columnar compression is not supported for tablespaces on this storage type I have executed the following commands :
alter table crm.cm_ncd modify partition P01_CM_NCD nocompress;
alter table crm.cm_ncd modify partition P02_CM_NCD nocompress;
alter table crm.cm_ncd modify partition P03_CM_NCD nocompress;
[code]...
ERROR at line 1:
ORA-12801: error signaled in parallel query server P005
ORA-64307: hybrid columnar compression is not supported for tablespaces on this storage type If all the partitions are uncompressed why i am getting this error message ?
This is the below method which I have used to figure out exadata model.
ex: grep -i MACHINETYPES /opt/oracle.SupportTools/onecommand/databasemachine.xml <MACHINETYPES>X3-2 Half Rack HP</MACHINETYPES>
But for one environment, though it is a full rack but still I am getting result as half rack.
I am having an Oracle 11g R2 RAC setup. My database size is 22TB in normal servers. I have checked my database in Exadata X2-2 and found out that the HCC was good and as per my assumption the 22TB can come down to 10TB .
My challenge is i need to transfer the 22TB data to the exadata quater rack which is having space constraint. Is there any way other than export & Import as data export and import will use entire 22TB. Is there any way to transfer the data to Exadata with compressed form from the source server.
I am having doubt on the no_index concept in oracle. I am using oracle exadata server.It is basically data warehouse project.I am in the situation to join some tables and get the result set for reporting purpose.
Among the tables, 2 tables having huge count.1st table has more than - 1,000,000,000 rows2nd table has more than - 200,000,000 rows when i join these 2 tables with some small set of tables, it is taking long time (around 20 MIN) to retrieve the result set. The final result set is around 100 rows only.
But, when i force NO_INDEX hint in the same query, is giving the same result in very fast manner(around 5 MIN). Because it is working based on cell smart scan. So, can i force the NO_INDEX hint to all tables? I forced the NO_INDEX hint only the table which is contain 200,000,000 rows not for others.
Query Plan : Normal Query using the the range scan based on the key. No_INDEX Query going full table scan.
I would like to know if I can create one OS user by ORACLE_HOME database ?
View 3 Replies View RelatedTasks need to performs are
1) Post Installation check list ie: How can I see every things are installed correctly.
2) upgrade the exadata OS version .
3) Upgrade the Database.
4) Test Migration from Oracle database to Exadata.
5) Right now there RAC servers are installed without domain, I need to add domain name to existing RAC.
We are planning to upgrade a database from 9.2.0.8.0 to 10.2.0.4.0.We have a lot a PRO*C programs pre compiled using 9.2.0.8.0 (and most likely even 9.2.0.7.0) compiler.
if we could upgrade the database without having to re-compile all the programs.We have tested this approach against some of our programs. Most of them executed fine - but in 2 cases we are getting "ORA-01001 invalid cursor". I suspect, that the case is that Pre compiler version 9 is not supported against 10g databases - but I am not sure.
Would it be a better option to upgrade Pre compiler/client as the first step and the db as the second step (and would that be supported) ? We definitely don't want to upgrade both Pre compiler/Client and the Database in one goal - that would be too risky.
I have a report of version 10g . I want to run this report in oracle reports 6i version.
View 1 Replies View RelatedI am using Oracle 11g version, I wanted to check if a particular function is available in the earlier version of Oracle (Say 9i). Oracle optimizer to run the query only using the features available in the 9i version?
View 4 Replies View Relatedi install oracle 10g on linux on perform the following step but my database is not auto start with the machine
Automatic startup and shutdown oracle on linux Oracle database server provides two scripts to configure automatic database startup and shutdown process.
The scripts are,
$ORACLE_HOME/bin/dbstart
$ORACLE_HOME/bin/dbshut
Now let's look at unix level script. When a unix machine boots it runs scripts beginning with Snnname in /etc/rc3.d.
-Here the number nn indicates the order in which these scripts will be run. The name just indicates the function of the script.
In the same way shutdown scripts are named as Knnname which are run from /etc/rc0.d.
If we want that Oracle is the last program that is automatically started, and it is the first to be shutdown then we will name the startup and shutdown scripts on OS like /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
The database script dbstart and dbora will be called from OS script /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
Note that dbstart and dbshut take each SID, in turn, from the /etc/oratab file and startup or shutdown the database.
Automate Startup/Shutdown of Oracle Database on Linux
Step 01: Be sure that oratab file is correct and complete.
Check for oratab file either in /etc/oratab or in /var/opt/oracle/oratab.
Database entries in the oratab file have the following format:
$ORACLE_SID:$ORACLE_HOME:Y
Here Y indicates that the database can be started up and shutdown using dbstart/dbshut script.
If in my database there is two database named arju and arjudup then my oratab file will contain the entry like,
arju:/var/opt/oracle/product/10.2.0/db_1:Y
arjudup:/var/opt/oracle/product/10.2.0/db_1:Y
where /var/opt/oracle/product/10.2.0/db_1 is the $ORACLE_HOME of my database.
Step 02: Create a script to call dbstart and dbshut. In this example I will create one script that will do both startup and shutdown operation. I will name this script as dbora and will be placed in '/etc/init.d'.
a) Login as root.
b) Change directories to /etc/init.d
c) Create a file called dbora and chmod it to 750.
# touch dbora
# chmod 750 dbora
d)Edit the dbora file and make the contents of it like below.
[Code].....
I am using Oracle 10g on Fedora Linux and trying to learn a bit of pl/sql. Here is the piece of code that I today tried to run in the SQL Plus window but it back with an error message saying SP2-0640 Not connected.
set serveroutput on
declare x number;
begin x :=7777;
dbms_output.put_line('x= ');
dbms_output.put_line(x);
end;
We have 11.2.0.3 RAC on Oracle Virtual Box,OEL 5.8. Storage is ASM on EMC SAN.Even when the database is not connected to application and thus open but idle and none is working on it, and all other virtual machines are powered off, we are still getting a continuous i/o in SAN.Since I am new to RAC setup I need to know the few things...
1.Is it normal behaviour?
2.If yes, what is the reason of this i/o? Is it due to continuous ping on voting disk?..write in OCR? automatic backup of OCR?
Attached File(s)
SAN_I0_Issue.png ( 65.33K )
Number of downloads: 2
Through RMAN i have to connect to two databases having same name but the databases are at two different nodes.Can RMAN recognise the 2 databases.If yes how? I want to know the command.
View 1 Replies View RelatedIs there any command to identify the disks are HC OR HP ? Indirectly i could find with the following exercise -
$ grep -i MACHINETYPES /opt/oracle.SupportTools/onecommand/databasemachine.xml <MACHINETYPES>X2-2 Half rack</MACHINETYPES> ASMCMD> lsdgState Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files NameMOUNTED NORMAL N 512 4096 4194304 18235392 10597264 2605056 3996104 0 N DATA/MOUNTED NORMAL N 512 4096 4194304 2087680 2085808 298240 893784 0 Y DBFS_DG/MOUNTED NORMAL N 512 4096 4194304 27240192 18871860 3891456 7490202 0 N RECO/ = 45TB >>
[URL] ....... >> Page 5 >> HP SAS disks
My exadata quarter rack machine has two asm diskgroups, DATA1 with 5TB and RECO with 3TB. I'd like to resize RECO to 1TB and DATA1 to 7TB.
I know ALTER DISKGROUP RESIZE command, but my question is about resize RECO volume from 3 to 1 TB: is it supported by Oracle?? Let me know risks /issues with this resize?
Is there any way to tell what processes/sessions were connected to a DB after I get an ORA 20error. As you can see from the query results below, I did hit the max value of processes but I would like to know when it happen and who was connected.
I realize I can up the value, but before I do that I want to see what caused this to happen.
SQL> select * from v$resource_limit where resource_name in ('sessions', 'processes');
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL
LIMIT_VALU
----------
processes 221 1000 1000
1000
sessions 223 1020 1105
1105
My Oracle DB is working properly till yesterday. When i tried connecting to it today using scott/tiger@orcl its not accepting.So i entered as system/system..it connected
when i tried to select instance_name from v$instance; it is giving me error
SP2-0640: Not connected
I want to drop some users in Oracle DB using sqlplus but I am getting error:
SQL> DROP USER test CASCADE;
DROP USER test CASCADE
*
ERROR at line 1:
ORA-01940: cannot drop a user that is currently connected.But when I ran below command to know sessions connected I am not getting any results:
SQL> select sid,serial# from v$session where username = 'test';
no rows selected
Refer a MOS Note for configuring data-guard on Exadata with DR server being and Exadata DBM too.
View 4 Replies View RelatedHow to compress sub partition on exadata, using 'for query high' and pctfree 10 options? I used this statement, but I get only ORA-14160:this physical attribute may not be specified for a table subpartition.
alter table table_name move subpartition subpartition_name PCTFREE 10 compress for query high;
If I have a Partitioned Table set as COMPRESS FOR QUERY/ARCHIVE HIGH what would be the impact when a row in Partition X has to move to Partition Y?
View 3 Replies View RelatedExadata storage indexes stores eight columns in a table.
I am bit confused here, what will happen if I am having a table with 24 columns. In this case how does Storage indexes use these 24 columns.
whether three indexes will be created for this table?.
My management is wanting to know the serial numbers of all the components of our two Exadata machines: one quarter-rack V2 and one half-rack V1
I can use dmidecode to get the appropriate information for comp nodes and storage cells, but not for the Cisco/Voltaire switch, nor the IB switches. I read MOS 1299791.1 and the thought of asking a DOC operative to pull out the label ‘which could damage the switch’ worries me quite a bit.
Is it still true that we are unable to obtain the serial number for the IB switches and the Cisco/Voltaire switches from the CLI of the switches themselves? Sad face.
I have few doubts in rac environment
1.In 2 node rac while adding datafile to tablespace if you forget to mention '+'then what will happen whether it is going to be create or it throws an error if it creates where exactly located and other node users how to work on that tablespace .what all steps to perform that datafile is useful for all node users.
2. In Rac environment how to check how many sessions connected to particular node.
3)In Rac any node is evicted due to network failure then after we rebuild the network .Is there any steps to do manually to access the failure node after rebuilding the network or it will automatically available in cluster group which service is perform this activity.
4.While configuring cluster ware you choose voting disk and ocr disk location and which redundancy you will choose suppose if you go for normal redundancy how many disks you can select for each file either one or two?
I am trying to enable OLTP compression on tables and at tablespace level for the tables
Steps I am following are:
1. Move indexes to its own tablespace
2. enable OLTP compression at table level:
alter table table_name move compress for OLTP
3. Rebuild indexes
4. Issue I have is what to do with tables with LOB columns
ALTER TABLE lob_table MOVE LOB (LOB_COL) STORE AS (TABLESPACE index_tbsp); -- Is this correct?
5. alter tablespace data_tablespace default compress for OLTP;
I have a question, is the sequence of steps correct. For tables with LOB columns do we needto move lobindex to index tablespace. Beacuse lobsegment and lobindex are created in data tablespace?
I first started database, then gone to option Run SQL command line. After that while creating table it is showing error like "SP2-0640: Not connected."
View 2 Replies View RelatedI am trying to gather stats in parallel on a schema in which tables are OLTP compressed
The command I use
BEGIN
DBMS_APPLICATION_INFO.set_module ('Gather Stats', user);
DBMS_STATS.GATHER_SCHEMA_STATS(ownname=>'schemaname', DEGREE=>64, estimate_percent => DBMS_STATS.AUTO_SAMPLE_SIZE, method_opt => 'FOR ALL COLUMNS SIZE AUTO', CASCADE => TRUE, GRANULARITY => 'AUTO');
END;
/
I see blocker with wait event=PX DEQ: Execution Msg
Waiter with wait event= PX Deq: Execute Reply
When I run ASH report all I see is : IPC send completion sync
we have a quarter rack with 3 cell (storage) servers. Actually I don't know which exact disks we have inside.
How could I check if we have unallocated disk space in the storage server? I would like to do this command line.describe me the steps?
I need a query to find out IP Adress for all currently connected users in V$session.
View 7 Replies View Related
