I am getting below error while taking backup through RMAN.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of delete command on ORA_SBT_TAPE_1 channel at 01/09/2011 20:27:10
ORA-27191: sbtinfo2 returned error
what RMAN will do at the background while taking hot backup.I am not getting any suitable docs to clear my concepts.
View 10 Replies View RelatedI took backup of Datafiles , archivelog files and controlfile through RMAN. Now, i want 3 backup file will created as a output of RMAN operation. It would be :
1 backupfile for all the datafiles
1 backupfile for all the archivelog files
1 backupfile for controlfile.
It have to be regardlessly whatevr my DB size is. It it possible to do so. How i can can write rman script to accomplish the task.
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
This is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I am running Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I ran the following commands in RMAN:
RMAN>
connect target /
CONFIGURE COMPRESSION ALGORITHM 'MEDIUM' ;
set encryption identified by 'xxxx' only;
run {
[code]...
I get the follwing error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/19/2013 06:57:4
ORA-03113: end-of-file on communication channel
[code]...
I'm encountering the following 2 different errors from RMAN:
Prior to OS restart:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10039: error encountered while polling for RPC completion on channel t1
RMAN-10006: error running SQL statement: select act from x$ksusex where sid=:1 and serial=:2
RMAN-10002: ORACLE error: ORA-03113: end-of-file on communication channel
[code]...
diagnose what actually occurred during RMAN backup?
Oracle 10gR2 (base)
Dataguard, no RAC
no ASM
Performing backups on the physical standby via RMAN. We need to restore our test database, and right now it is equivalent to the production. The DUPLICATE command seemed the best bet. We have controlfile and SPFile both on Auto-backup, and the RMAN on a six day retention with weekly 0 level backups and nightly level 1 cumulative backups.
However, when I run the DUPLICATE it chokes being unable to find a current controlfile nor one in backup, even though we have six days worth of supposedly good (validated) backups. We are not using a catalog, rather the DB controlfile.
The solution to this error is reopen the database and try again. however, the physical standby cannot be opened. It is the standby. What if we move the last backup to the primary database, "register" it there, and try this DUPLICATE?
I have seen nothing on this in my searches, and the Oracle documentation does not address this, though it recommends backup from the Physical Standby.
RMAN-05513 is the error code.
online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
View 1 Replies View Relatedi am trying to restore database using rman backup on same machine using command
RMAN> run {
2> set until sequence 23;
3> restore database;
4> recover database;
5> }
but it will give me error.
RMAN-00571: =======================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===========
RMAN-00571: =======================================================
RMAN-03002: failure of restore command at 03/31/2011 19:18:11
[code]....
Version of Oracle: 9.2.0.8.0 Enterprise edition
Running on Windows 2003 Server
No catalog
Backup controlfile and database work great.
Cannot run backup archivelog all command. I did check metalink but was not able to find this error / bugggh.
RMAN-03002 failure of backup command at 07/24/2012
Rman-00600 internal error, arguments [9018] [7] [] [] []
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
get the following error when i do this,
RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45
ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
How can we tune our RMAN Duplicate as it was taking 10+ hours to finish. Current production database size is 800GB. Approx duration of rman online backup (FULL, including archived logs) is 4 to 5 hours.
Here's the rman backup script we used:
sql 'alter system archive log current';
list archivelog all;
run
{
show all;
report schema;
backup database plus archivelog delete all input;
}
exit
Here's the rman duplicate command we used:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 02:30:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
User wants to take a backup of the table .
There are 2 methods that i know to take a table backup. From those 2 methods
1.Using Export ?
exp user/pass file=table.dmp tables=owner.table compress=n consistent=y grants=y
feedback=1000 log=table.log
2.Copy method ?
create table table_backup as select * from <table_name>.
What is the best possible method to take backup of 50 tables with data ? My DB version is 11gR2
View 14 Replies View Relatedunderstanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View RelatedI am new to DBA activities.I am working on 11.2.0.1.0 version in Oracle.
My database keeps on growing so as a security measure, I am asked to take backup of the database periodically without shutting down this database. Since this task has to be done periodically, I have to schedule the job for this task.? I know how to take export of the database.. but not sure about the periodical backups... Now sure how to proceed on the activity,
I am working on 11.2.0.1.0 version in Oracle.
My database keeps on growing so as a security measure, I am asked to take backup of the databse periodically without shuttingdown this databse. Since this task has to be done periodically, I have to schedule the job for this task.? I know how to take export of the database.. but not sure about the periodical backups..
Is this possible to take the dump of a huge table , say 500gb, into multiple files and then import it in other database? if yes how can we do it?
Note that it is a single table with 500GB of size.
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedIs this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
My Rman log location is d:kp man.log, how can i fetch the result of backup into this log file after windows scheduler runs backup..
View 6 Replies View RelatedDoes the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
