Does Trcsess Combine Various Trace Files In Order In Which Queries Executed
May 28, 2013Does trcsess combine various trace files in the order in which the queries were executed?
View 3 Replies
ADVERTISEMENT
SQL & PL/SQL :: Combine 2 Queries Into 1 Without Using UNION
Jun 5, 2012SELECT b.KPCNO
,b.KPC_FULL_NAME
,min(c.time) in_time
FROM xxkpc_hr_personnel_v2 b
,xxkpc_fingerscan_data_v c
[code]........
SQL & PL/SQL :: How To Combine Queries When WITH Clause Is Used
Jun 21, 2010I have 4 select queries.
Query1
Query2
Query3
Query4
First Step:Combine Query1 and Query2,but the requirement is Query2 should only use the Acct_ID and Bill_ID which are output from Query1.
Second Step:Combine Query3 and Query4,but the requirement is Query4 should only use the Acct_ID and Bill_ID which are output from Query3.
Third Step: Is to now combine both the data set from First Step and Second Step.
In order to achieve my First and Second Steps I used WITH clause.
With S1 as ( Query1 ),
S2 as ( Query1 Union Query2)
Select S2.* from S1,S2
where S1.ACCT_ID=S2.ACCT_ID
AND S1.BILL_ID=S2.BILL_ID
With S3 as ( Query3 ),
S4 as ( Query3 Union Query4)
Select S2.* from S3,S4
where S3.ACCT_ID=S4.ACCT_ID
AND S3.BILL_ID=S4.BILL_ID
1. Is that approach right for achieving my First and Second step requirements ?
2. How to achieve Third Step ?
SQL & PL/SQL :: Combine Two Queries To Get Full Output
Jun 8, 2011how to combine 2 queries as attached in notepad file in order to get full output?
View 3 Replies View RelatedSQL & PL/SQL :: Record Of Last Executed Queries
Sep 15, 2010I have some troubles when I try to retrieve last executed queries in a database.
For example;
I run the script below:
select distinct t.first_load_time, t.sql_text, t.last_load_time, s.username
from v_$sql t, v$session s
where s.username='SYS'
And as a result, I retrieve the queries executed by SYS user. But the problem is that, if SYS user executed the same query more than once,
only the very first record is shown.
It is like this,
SYS user executes "select * from table_abc" at 10:54:35, and after that SYS executes the same query at 13:45:55. and after running
the query above, I can only see the record which was executed at 10:54:35. I need to see the both results.
PL/SQL :: Queries Executed By A Session
Jul 11, 2012I am trying to trace the SQL statements executed against a particular database user. I don't have AUDITING enabled and I am using Oracle 11g.I have the following query :
SELECT
S.MODULE,
SQL_TEXT ,
S.EXECUTIONS
FROM
[code].....
But if multiple users running the 'APP.EXE' are connected to the same db user, I am not able to understand which OS user executed which query. So I tried to join with V$SESSION view to get the user details.
SELECT
S.MODULE,SQL_TEXT ,SN.OSUSER, SN.MACHINE, S.EXECUTIONS
FROM
SYS.V_$SQL S,
SYS.ALL_USERS U,
V$SESSION SN
WHERE
S.PARSING_USER_ID=U.USER_ID
AND UPPER(U.USERNAME) IN ('USERNAME')
AND (UPPER(S.MODULE)='APP.EXE')
AND S.SQL_ID=SN.SQL_ID
ORDER BY S.LAST_LOAD_TIME
But this doesn't seems to be working(In my case it didn't return any rows) I have also tried the following
select S.SQL_TEXT,S.MODULE,S.EXECUTIONS,SN.OSUSER,SN.MACHINE,SN.SID, U.username,U.user_id from
SYS.V_$SQL S, v$open_cursor oc,SYS.ALL_USERS U,V$SESSION SN
where S.PARSING_USER_ID=U.USER_ID
AND UPPER(U.USERNAME) IN ('USERNAME')
AND (UPPER(S.MODULE)='APP.EXE')
and oc.SQL_ID=s.SQL_ID AND SN.SID=OC.SID AND SN.SADDR=OC.SADDR;
but I am not sure whether this is giving the right results. So, I have the following questions
1) How do I get the queries executed by each session?
2) The EXECUTIONS column of V_$SQL seems to the executions from all the sessions. How do I know the number of times a particular query is executed by a session?
3) How long a record about a query will be stored in V_$SQL? When do Oracle delete it from the view?
Selecting All Queries Executed Between Given Date And Now
Oct 26, 2010Is information in v$sql enough to select all queries executed between given date and now? When the queries are removed from v$sql?
View 1 Replies View RelatedPerformance Tuning :: How To Find Out Queries That Are Executed In Particular Range Of Time
Sep 9, 2011here we have an scenario where we want to find out all the sql statements that are executed in a particular time. The sql statements are executed via our application. I tried in awr report but it shows only the sql query which has taken long time to execute. and i even tried in V$session and V$sqlarea. how to view the executed sql statements in a particular session/current session
View 3 Replies View RelatedSQL & PL/SQL :: Where Conditions That Have Dependency Don't Get Executed In Order
May 26, 2010While there's numerous QAs about inserting an image into the DB using the Data Block, how does one remove an image? Obviously there's the "UPDATE ... SET X = EMPTY_BLOB();", however, that kills the Data Block/Form's flow, and it doesn't update.
I've tried a few things:
* :CONTROL.IMG1 := NULL; (bad bind variable)
* :CONTROL.IMG1 := EMPTY_BLOB(); (some other error, probably as above)
Opening Permissions To Trace Files?
Nov 15, 2010un-documented parameter _trace_files_public / I want to set this to true so my app team can review trace files. better way to proceed to open read permissions for non oracle users.
View 2 Replies View RelatedMoving Trace Files To Archive Location?
Aug 20, 2012I am using Oracle RAC 11gR2.I am planing to move my old trace files to an archive location.
I have the below questions concerning the users and groups used by Oracle RAC when moving the trace files.It is related to the permissions but it is about oracle behavior.
The trace files of database (oracle user) are created as below:
284 -rw-r----- 1 oracle asmadmin 283571 Aug 20 18:08 PPRD1_mmon_13893716.trc
4 -rw-r----- 1 oracle asmadmin 125 Aug 20 18:10 PPRD1_gcr0_11730998.trm
4 -rw-r----- 1 oracle asmadmin 2833 Aug 20 18:10 PPRD1_gcr0_11730998.trc
580 -rw-r----- 1 oracle asmadmin 588489 Aug 20 18:12 PPRD1_lmhb_15859792.trm
[code]....
when moving the files using the oracle user it will be created as oracle:oinstall and not oracle:asmadmin since asmadmin is not a group of the oracle user.
1. How oracle created my trace and log files with permission oracle:asmadmin?
2. How should I move these files? I moved it using the Oracle user and it was created as oracle:oinstall with Operating system error "unable to duplicate owner and mode after move"
How To Confirm Order Of Data In Results Of Two Sql Queries
Feb 9, 2009I want to confirm the order of the data in results of two sql queries.
For example, in my table 5 columns are there.c1 to c5.
c1 c2 c3 c4 c5
--------------------------------------------------
test100 1 A 1-Jan-2006 2-Jan-2006
test100 2 B 3-jan-2006 4-Jan-2006
test101 1 A 01-Jan-2006 2-Jan-2006
test101 2 B 03-Jan-2006 4-Jan-2006
test101 3 c 05-Jan-2006 06-Jan-2006
In this table if you order by c2,
select c3
from tab1
where c1='test101'
order by c2;
c3
---------
A
B
C
If you order by c4,
select c1,c2,c3
from tab1
where c1='test101'
order by c4;
c3
------
A
B
C
Sometimes order of these data may change like. the result of the 2nd query may change (bcos of c4 date column changes)
C3
--
A
C
B
So,@ run time i want to check the order of these 2 results should match....if not,i need to display the corresponding c1 column.
Active Trace Files Deleted - How To Free Up Space
Oct 11, 2013Some trace files were deleted with rm command. Obviously they were active and now the free space does not free up (over 9GB). How can this be fixed without database interruption?
View 4 Replies View RelatedServer Administration :: Large Trace Files Generated In Udump?
Oct 24, 2011We have Oracle 10g(10.2.0.4) RAC on AIX 5.3, there are 3 RAC instances on each node.From Oct 9th, we found one of the instance in node 1 generated a large size trace files in udump. The largest size of the trace file take up 3G. But there's only about 15G $ORACLE_BASE direcotry. After some time, we should delete some trace files for releasing the space.
Here is a part of alert log when this issue happen:
Sun Oct 9 23:18:15 2011
Errors in file /oracle/app/oracle/admin/bzywk/udump/bzywk1_ora_3166258.trc:
ORA-00600: internal error code, arguments: [17087], [0x70000010DF9F580], [], [], [], [], [], []
Sun Oct 9 23:18:16 2011
Trace dumping is performing id=[cdmp_20111009231816]
[code]....
I checked with some trace files, I found all these files contains a huge info of processes.
Performance Tuning :: Script To Load Trace Files Errors To A Table?
Jul 13, 2013I need to create a script which can fetch the error related details from Trace files regularly (may be twice a day ) to a custom table in DB.
View 3 Replies View RelatedServer Administration :: User Dump / Trace Files With Huge Size In MBs
Mar 22, 2012I am facing problem in user_dump_dest directory...I have noticed that there are a lot of trace files with huge size in MBs.I clean it and after 4 days there are 40G of size..
View 1 Replies View RelatedConverting MySQL Queries To Oracle Compatible Queries
Jan 23, 2007our system has always been running on mysql database and recently we have switched to oracle. As the current system is coded using mysql query syntax, when i run this program using oracle database, i got a error. The language that I'm using is JSP.
this is the error message:
The following query could not run on oracle. To convert these mysql queries to oracle compatible queries.
SELECT productID,productName FROM products order by productName;
select newsID,newsDate,newsHeadLine1 from news order by newsDate Desc limit 3
SELECT fuji_products.productID, productName_Display FROM products,products_availability where products_availability.productID=products.productID and (product_status='enabled' or product_status='all') AND category='12'
SELECT catID, catSub1 from category where catSub = '"+ prodCat +"' AND catSub1 is not null group by catSub1 order by catSub1
Performance Tuning :: Order Of Steps In Execution Path And Order Of Predicates In The Plan
Mar 20, 2012Which step in the following plan is the first step of execution
I reckon it is "TABLE ACCESS BY INDEX ROWID| BANK_BATCH_STATE"
Is that correct?
In the "Predicate Information (identified by operation id):"
section the predicates - access and filter for the step "TABLE ACCESS FULL | PYMNT_DUES" are displayed first
Isn't there any relation between the order of execution steps and the order in which predicates are displayed?
Execution Plan
----------------------------------------------------------
Plan hash value: 538700484
-------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 2364 | 15 (14)| 00:00:01 |
|* 1 | FILTER | | | | | |
| 2 | HASH GROUP BY | | 1 | 2364 | 15 (14)| 00:00:01 |
| 3 | NESTED LOOPS | | 1 | 2364 | 14 (8)| 00:00:01 |
| 4 | NESTED LOOPS | | 1 | 2313 | 13 (8)| 00:00:01 |
| 5 | NESTED LOOPS | | 1 | 2281 | 12 (9)| 00:00:01 |
| 6 | NESTED LOOPS OUTER | | 1 | 2255 | 11 (10)| 00:00:01 |
|* 7 | HASH JOIN | | 1 | 175 | 6 (17)| 00:00:01 |
|* 8 | INDEX RANGE SCAN | INDX_2 | 12 | 612 | 2 (0)| 00:00:01 |
|* 9 | TABLE ACCESS FULL | PYMNT_DUES | 43 | 5332 | 3 (0)| 00:00:01 |
| 10 | VIEW PUSHED PREDICATE | | 1 | 2080 | 5 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 154 | 5 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 103 | 4 (0)| 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID| BANK_BATCH_STATE | 1 | 32 | 2 (0)| 00:00:01 |
|* 14 | INDEX RANGE SCAN | INDX_BBS_1 | 3 | | 1 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID| DAILY_CHECK | 1 | 71 | 2 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | INDX_SEARCH | 1 | | 1 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | INDX_2 | 1 | 51 | 1 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | INDX_IAM_SR_NO | 1 | 26 | 1 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | INDX_2 | 1 | 32 | 1 (0)| 00:00:01 |
|* 20 | INDEX RANGE SCAN | INDX_2 | 1 | 51 | 1 (0)| 00:00:01 |
-----------------------------------------------------------------
SQL & PL/SQL :: Combine Both Selects Into One?
May 11, 2012Is it possible to combine both these selects into one.?
SELECT a.grouping_set_member_id,
a.service_agreement_id,
a.enrolment_group_id,
a.enrolment_group_class_id,
a.effective_date,
[code]...
Where l_service_agreement_id,l_enrolment_group_id,l_ENROLMENT_GROUP_CLASS_ID,l_effective_date
are vaues from the First SELECT.
SQL & PL/SQL :: Result Order In 2 Table Joins Without Order By
Sep 6, 2011I have below tables,
describe rpthead
Name Null Type
--------------------------- -------- -------------
RPTNO NOT NULL NUMBER
RPTDATE NOT NULL DATE
RPTD_BY NOT NULL VARCHAR2(25)
PRODUCT_ID NOT NULL NUMBER
describe rptbody
Name Null Type
------------- -------- -------------
RPTNO NOT NULL NUMBER
LINENO NOT NULL NUMBER
COMMENTS VARCHAR2(240)
UPD_DATE DATE
The fact is that we store some header in RPTHEAD and store real data in RPTBODY, the question is that if I use below SQL to query all data for a 'PRODUCT_ID'.
SELECT t0.LINENO, t0.COMMENTS, t0.RPTNO, t0.UPD_DATE
FROM RPTBODY t0 , RPTHEAD rpthead
WHERE
(
t0.RPTNO = rpthead.RPTNO
AND
t0.UPD_DATE>=to_date('1970/01/01 00:00:00','YYYY/MM/DD hh24:mi:ss')
AND
rpthead.PRODUCT_ID IN ('4647')
)
I do not want to have 'ORDER by' clause since data set is too large, the sorting takes long time, is there any way to get the result rows in the order sorted by RPTNO? We have the index for RPTNO on RPTBODY.
SQL & PL/SQL :: To Get Output From Table - Possible To Combine A Row?
Mar 6, 2012To get output from a below mentioned table? can we combine a row like that?
Table: Test_Fruits
ID_NO_1 LABELS1 ID_NO_2 LABELS2
------- -------- ------- --------
1Fruit
2Vegitable
4 Apple
3 Potato
-----------------------------------------
Expecting output:
Pls guid me how to get like this?
ID_NO_1 LABELS1 ID_NO_2 LABELS2
------- -------- ------- --------
1Fruit 4 Apple
2Vegitable 3 Potato
-----------------------------------------
SQL & PL/SQL :: Combine Query Output In One Row
Aug 13, 2010If I have below two sql statment.
select count(*) from table_a;
select count(*) from table_b;
How can I output it in one row together like below
Table_a | Table_b|
10 | 20|
give me detailed example ....
SQL & PL/SQL :: How To Combine 3 Decodes Together On One Line
Mar 4, 2011I am having trouble putting all 3 of these decodes together on one line. I would like my output to return like this:
ytd_state_tax ytd_ss_tax ytd_medicare_tax
============= ========== ================
182.29 163.28 56.37
if deduct_type=6012 return sum(pdt1.deduct_amount) YTD_MEDICARE
else
if deduct_type=6020 return sum(pdt1.deduct_amount) YTD_STATE_TAX
else
if deduct_type=6010 return sum(pdt1.deduct_amount) YTD_SOCIAL_SEC
[Code]....
Aggregate Function - Combine Results
Nov 24, 2009I have a query more or less like this:
SELECT field1,
COUNT(x) AS COUNT
FROM my_table
GROUP BY field1;
For field1 I want to get a count, but if field1 is like 'ABC%' then I want to combine all of those.
So if I have the following:
ABC1 | 5
ABC2 | 10
XYZ1 | 3
I want results like this:
ABC | 15
XYZ1 | 3
I've tried using some case statements like
SELECT CASE
WHEN field1 LIKE 'ABC%' THEN
'ABC'
ELSE
field1
END AS field1,
COUNT(x) AS COUNT
FROM my_table
GROUP BY CASE
WHEN field1 LIKE 'ABC%' THEN
'ABC'
ELSE
field1
END;
but this just gives me
ABC | 5
ABC | 10
XYZ1 | 3
How can I combine record 1 and 2 from the last record set example above?
SQL & PL/SQL :: Combine Update And Insert Command?
Jul 23, 2012i have a given pl/sql program that first deletes records out of a table and afterwards inserts new rows. now for example 2 rows out of 10 have a foreign constraint and can not be deleted that easily anymore. so i delete the ones i am able to (with the where not exists clause).
now i want to update the records who have a foreign key constraint and the rest with a regular insert. how would i do this the easiest way. i thought i could use insert with a where clause!!
here i have some part from the original
declare
procedure add(
i_id pls_integer,
[Code].....
SQL & PL/SQL :: Combine Two Independent Select Statements?
Dec 10, 2010ive got two select statements which fetches data from different tables. I need to join the two result set . is it possible to do it from sql. Heres the query.
1)
SELECT
COUNT(CASE WHEN (INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=1) THEN 1 END)CUSTOMER_EMAIL,
COUNT(CASE WHEN INTERACTION_TYPE= 'EmailED' AND CONTACT_PARTY=2 THEN 1 END)OTHER_EMAIL,
[Code]....
2)
SELECT
SUM (CHEQUE_TOTAL) CHEQUE_TOTAL
FROM RI_CHEQUE_VOUCHER_REFUND refund
INNER JOIN CH_CASE case ON (case.id = refund.id)
INNER JOIN EVA_ENTITY_DEFINITION ed ON (ed.name= 'ChequeRefundCaseED')
WHERE
case.creation_time<= SYSDATE
AND
case.creation_time>= SYSDATE-7
Again I need to combine the resultset.So the result would look like
Customer_Email Other_Email Customer_Whitemail Other_whitemail Customer_telephone Other_Telephone Cheque_total
Combine Tables With Union But Limit Number Of Records?
Sep 13, 2007Updated to Add: In a last ditch search, I found my answer with ROWNUM <= 1 in the Where clause. It works and I can go from there with what I want to do.
I have a website that pulls similar information from multiple queries using a Union-based query. I want to only pull 1 record from one section, two from another, and 5 from the third. I've so far found LIMIT but haven't been able to get it to work in that way. Is it possible to limit each query in the union as I am looking to do?
The query is:
SELECTc.priority, c.startDate, p.headline, p.newsID, p.kicker, p.webPath, p.makePopup, p.thumbnail, p.shortDesc, p.storyType, d.filePath
FROM (so_news p LEFT OUTER JOIN so_news_deptLevel c ON p.newsID = c.newsID) LEFT OUTER JOIN so_departments d ON d.deptID = c.deptID
WHERE p.storyType = 'alert' AND c.display = 'yes' AND c.startDate <= sysDate AND c.endDate >= sysDate
UNION All
SELECTc.priority, c.startDate, p.headline, p.newsID, p.kicker, p.webPath, p.makePopup, p.thumbnail, p.shortDesc, p.storyType, d.filePath
[code]....
SQL & PL/SQL :: Query - Combine Prefix / Sfirst Suffix1 And Last Suffix2?
Mar 5, 2013I have the following table
PREFIXSUFFIX1SUFFIX2CodeDescription
0117default
0220unknown
011200unknown
021240unknown
025300unknown
031340unknown
[code]...
If code value is same i would like to combine prefix,sfirst suffix1 and last suffix2. So from above table i want something like the following table.
PREFIXSUFFIX1SUFFIX2CodeDescription
0117default
022410unknown
02421426UKred
Complex Case Expression - Combine Two Statements To Get Desired Bucket
May 19, 2011I have a case expression as follows:
(CASE WHEN DATEa=DATEb THEN 0
WHEN DATEa> DATEb THEN NETWORKDAYS(DATEb, DATEa)
WHEN DATEa < DATEb THEN NETWORKDAYS(DATEa, DATEb)
WHEN STATUS='PENDING' THEN NULL
ELSE NULL
END) AS RESULTa,
Now what I need to be able to do is place those results in buckets, similar to this:
(CASE WHEN RESULTa < 0 THEN '<0'
WHEN RESULTa between -1 AND 6 THEN '<=5'
WHEN RESULTa >5 THEN '>5'
ELSE ''
END) AS BUCKETa
I understand that I can't call an alias from a previous case expresson to get these desired results and how I could combine the two statements to get the desired bucket.
Precompilers, OCI & OCCI :: Make Files That Compile PC Files In Unix
Jul 31, 2008I have written make files that compile .pc files in unix. This was for several projects that use an oralib source code directory.Just running proc on one target .pc file works fine on unix. I am trying to use proc - Oracle 10.2.0 - in windows and I keep getting:
Quote:unable to open include file
#include <stdio.h>
and other C library headers.
I am doing all development under cygwin, this way I can write a makefile just like under unix instead of using nmake.All C library headers are in /usr/include When I run proc on Solaris as that:
proc program.pc
No problems, and I do get program.c.
However in windows I get the previous error message. I have tried to do proc include=/user/include program.pc and proc include=/user/include parse=full program.pc but I still get the same error message.
