Data Guard :: Apply Redo While Standby Open In Read Only Mode?
Apr 9, 2013
1) If i do changes in table on primary database and if i open standby database in Read-Only mode, i can see those changes immediately only if Real Time Apply is enabled. Am i correct? Database version is 10.2.0.4
2) From 11g, It is possible to apply redo while the standby is open in read only mode. prior to 11g, it was not possible. Right?
3) Should I first cancel Managed Recovery prior to issuing “ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY”?
View 1 Replies
ADVERTISEMENT
May 26, 2013
I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
View 5 Replies
View Related
Dec 7, 2010
Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. solve this? Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
[code]...
View 18 Replies
View Related
Jul 23, 2013
We are going to set up dataguard physical standby on 2-node RAC, which primary is also 2-node RAC.
PRD site: prd-node1 & prd-node2DR site: dr-node1 & dr-node2.
As I know, there is only 1 instance to do the redo apply on standby (i.e. dr-node1).
My question is, what will happen if dr-node1 failure (by shutdown abort or kill process)? will dr-node2 change to redo apply?
View 3 Replies
View Related
Sep 1, 2010
i have attended an interview there i got a question like--->There are 100 archives generated in standby in that a series of five archives are missing and those are not available in the primary then how will you do.....
View 2 Replies
View Related
Apr 24, 2011
GROUP# THREAD# SEQUENCE# sizeMB ARC STATUS T
---------- ---------- ---------- ---------- --- ---------------- -
1 1 115 512 YES CLEARING O
2 1 116 512 YES CURRENT O
6 1 114 512 YES CLEARING O
4 1 112 512 YES CLEARING O
5 1 113 512 YES CLEARING O
3 1 111 512 YES CLEARING O
6 rows selected.
[code]...
Above result is from standby database.I am trying to understand the concept of standby redo log.My stadby database protection_mode is MAXIMUM PERFORMANCE.
View 10 Replies
View Related
May 29, 2010
How to transfer redo log files to standby database..
View 1 Replies
View Related
Sep 13, 2011
I've only successfully duplicate a standby database.
from the alert log
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'D:ORA102CTAREDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
[code].....
when I tried to add the online and standby redo log, it error out
SYS@CTA>select logdetail.member, loggroup.group#, loggroup.sequence#, loggroup.archived, loggroup.status lg_status, logdetail.status ld_detail, logdetail.type
2 from v$log loggroup join v$logfile logdetail
3 on loggroup.group# = logdetail.group#;
MEMBER
--------------------------------------------------------------------------------
GROUP# SEQUENCE# ARC LG_STATUS LD_DETA TYPE
---------- ---------- --- ---------------- ------- -------
[code].....
based on my understanding from [URL] ....
Quote:
As part of the duplicating operation, RMAN automates the following steps:
Creates a control file for the duplicate database
Restores the target datafiles to the duplicate database and performs incomplete recovery by using all available incremental backups and archived redo logs
Shuts down and starts the auxiliary instance (refer to "Task 4: Start the Auxiliary Instance" for issues relating to client-side versus server-side initialization parameter files)
Opens the duplicate database with the RESETLOGS option after incomplete recovery to create the online redo logs (except when running DUPLICATE ... FOR STANDBY, in which case RMAN does not open the database) when duplicating for standby database it does not create online redo logs. Duplicating a standby database does not creates online redo logs.
how should I add the online and standby redo logs. If I transfer the redo logs from primary to standby, it always encountered the the following error
Dump file d:ora102ctadumpcta_arc0_3624.trc
Tue Sep 13 19:21:53 2011
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the OLAP, Data Mining and Real Application Testing options
Windows XP Version V5.1 Service Pack 2
[code].....
View 1 Replies
View Related
Jul 19, 2011
I did standby before and it works wighout any disturbations and even configuration seems to me not very complicated - but it was before. now i am trying to do standby configuration once again. there is database named DESK.
two physical serwers:
sczepl-db07 - primary
r00979 - standby
on each for this serwer there is listener listening on port 1521, and on each is tnsnames configured properly:
for sczepl-db07
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sczepl-db07)(PORT = 1521))
[code]....
so why primary don't see standby db and claims that ther is no standby service? i proved that there is connection primary <--> standby.
View 21 Replies
View Related
Sep 10, 2012
How to find applied_time in standby database managed recovery mode (*PHYSICAL STANDBY*).
View 3 Replies
View Related
Apr 22, 2011
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
View 2 Replies
View Related
Aug 16, 2013
I believe, in a multiple RAC Physical Standby nodes only one node applies the archivelogs to the standby database. How you can find which node is the APPLY NODE using a SQL query?
I know you can veiw this information by querying the standby configuration using DGMGRL but how would you find out this information from a remote client using SQLPlus/PLSQL?
View 2 Replies
View Related
Feb 12, 2012
i, I've Two database one for primary(GISC) and one for standby (GISCST) when i start open standby database i appeare erro :
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'D:\ORACLE\ORADATA\ORCLSB\SYSTEM01.DBF'
I take the copy the datafiles from primary database and Pase them to the Standby database and the Enviroment of two database is :
SPfile for primary(GISC) IS:
*.compatible='10.2.0.3'
*.control_files='C:\oracle\product\10.2.0\oradata\gisc\CONTROL01.CTL','C:\oracle\product\10.2.0\oradata\gisc\CONTROL02.CTL','C:\oracle\product\10.2.0\oradata\gisc\CONTROL03.CTL'
*.db_block_size=8192
[code]....
View 1 Replies
View Related
Dec 7, 2010
Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
Error 604 happened during db open, shutting down database
USER: terminating instance due to error 604
[code]...
View 2 Replies
View Related
Aug 30, 2013
My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
View 2 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Feb 27, 2012
what is the most common mode in dataguard? maximize protection or maximize availability or maximize performance
View 6 Replies
View Related
Jun 5, 2013
DB Version- 11.2.0.3
For the maximum protection and maximum availability as well as to enable Real Time Apply we need to setup the standby redo log group. My question is what would be the standby redo log group configuration in case if we setup single instance standby database for 2-Node RAC primary database. Do we require a separate standby redo thread for each primary online redo thread or RFS use the Multiple Standby redo group from the same thread to receive the redo changes from both the node ?
View 3 Replies
View Related
Apr 23, 2013
While Configuring Data Guard for ORacle 10g (10.2.0.4) 64 bits on Windows 2007 Server 64 bits.I got few questions
1. What is the Default mode of Standby Database?
2. Should we Always Start Physical Standby Database to Recover Missing Redo Archive Log?
SQL> startup mount;
ORACLE instance started.
Total System Global Area 591396864 bytes
Fixed Size 2067496 bytes
Variable Size 163578840 bytes
Database Buffers 419430400 bytes
Redo Buffers 6320128 bytes
Database mounted.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
3. When there are missing Redo Log Archives e.g.
----On Standby Database--------
SQL> SELECT RESETLOGS_ID,SEQUENCE#,STATUS,ARCHIVED FROM V$ARCHIVED_LOG
2 ORDER BY RESETLOGS_ID,SEQUENCE#;
RESETLOGS_ID SEQUENCE# S ARC
------------ ---------- - ---
812980008 15 A YES
812980008 16 A YES
812980008 17 A YES
812980008 18 A YES
[code]....
65 rows selected. Log 8, 9, 10, 11, 12, 13, 14, 15 are missing.
How to Apply / Recover These Logs on Standby Database?
View 11 Replies
View Related
Mar 3, 2012
I want to replace one redo log on the primary database. actually this redo log is on G:oracleoradata; I want to move it on F:oracleoradata. How to do that cause the same redo log is also on standby database?
View 3 Replies
View Related
Apr 28, 2003
How i create Standby Database in Same HOST, we using SUN OS 5.8.
I read form Oracle DOC that i can create Standby Database in Same HOST and follow the tutorial , but when i try to mount standby database using ALTER DATABASE MOUNT STANDBY DATABASE EXCLUSIVE; i got a error message ORA-01102: cannot mount database in EXCLUSIVE mode
View 6 Replies
View Related
Mar 10, 2013
I have few queries regarding standby database.
1)On primary Database Standby Redo log is required for switchover and on standby database Standby Redo log is required for
--Real time Apply
--Maximum protection or Maximum availability
Am I correct?
2)My database is in Maximum Performance mode. I set up following entry on init.ora:
LOG_ARCHIVE_DEST_2='service=standby LGWR ASYNC'. My question is do I need to have STANDBY Redo log file on standby database in order to use LGWR transport (LGWR ASYNC)mode from primary? Without Standby redo log on standby database can it transport redo data from primary to standby using LGWR transport mode (LGWR ASYNC)?
3)I have changed from the "ARCH" attribute to "LGWR" attribute of the LOG_ARCHIVE_DEST_n initialization parameter. But I have not changed the protection mode. I would like to know whether is there any impact in the behavior of the database, if we do not change the mode from "MAXIMUM PERFORMANCE" to "MAXIMUM AVAILABILITY"?
View 1 Replies
View Related
Jun 30, 2008
I'm trying to create a physical standby database on my Oracle9i DB runing on WinXP.
Note: I have both Primary and Standby on the same system.
Actually everything went well .... I did created the standby DB but the problem is I can not start my primary DB if my standby DB is mounted. I get this error:
ORA-01102: cannot mount database in EXCLUSIVE mode
And when I read about the error message I learnt that I should start my DB in compatible mode ...
View 5 Replies
View Related
Oct 1, 2012
we have a created primary and physical standby databases. Before the switchover the application connected to dataguard allows updates on the database. However after the switchover, it allows read-only access and we are unable to update. Any comments prima-facie ?
View 12 Replies
View Related
Mar 22, 2010
I am unable to start ACTIVE DATAGUARD in 11g.
SQL> startup
ORACLE instance started.
Total System Global Area 522092544 bytes
Fixed Size 2090224 bytes
[code]...
Database altered.
SQL> select count(*) from scott.test;
select count(*) from scott.test
*
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
View 6 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
Jan 5, 2011
I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
View 7 Replies
View Related
Sep 22, 2010
I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies
View Related
Mar 14, 2012
I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
View 4 Replies
View Related