I am unable to start ACTIVE DATAGUARD in 11g.
SQL> startup
ORACLE instance started.
Total System Global Area 522092544 bytes
Fixed Size 2090224 bytes
[code]...
Database altered.
SQL> select count(*) from scott.test;
select count(*) from scott.test
*
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
I am trying to create the Physical StandBy Database in the same server. Till last 2 Final steps, everything went on well. In the final steps, when I try to open the StandBy Database, it throws the following Error:
*******************************************************
SQL...> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
*******************************************************
I tried creating the Physical Standby with the following Steps.
Environment: Oracle Release 10.2.0.1.0 / Windows 2003 Server Enterprise Edition SP2
Primary DB = 'PrimDB'
StandBy DB to be created ='StBy1DB'
In the same Server, location for
PrimDB datafiles='F:oracleproduct10.2.0oradataPrimDBData',
StandBy Datafiles='E:StandBy_DBData'
PrimDB Control Files='F:oracleproduct10.2.0oradataPrimDBControl'
StandBy Control Files= 'E:StandBy_DBControl'
[code]....
Step 1 Create the Oracle Service for StandBy DB "StBy1DB' and Create the Standy DB Password file.
ORADIM -NEW -sid StBy1DB -intpwd passwd -startmode manual
Step 2 Shut down the primary database.
SQL> SHUTDOWN IMMEDIATE;
Step 3 Copy the datafiles to 'E:StandBy_DBData'. (including Temp01.dbf is it Right?)
Step 4 Restart the primary database.
Restart the primary database:
SQL> STARTUP;
Step 5 Create a Control File for the Standby Database (Should this command be given in Mount Status or Open Status?)
From Primary database,
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'E:StandBy_DBControlStByControl01.ctl';
Step 6 Prepare the Initialization Parameter File to be Copied to the Standby Database
SQL> CREATE PFILE='E:StandBy_DBPFileinitStBy1DB.ora' FROM SPFILE;
Step 7 Set Initialization Parameters on a Physical Standby Database
db_cache_size=444596224
java_pool_size=4194304
large_pool_size=4194304
shared_pool_size=150994944
streams_pool_size=0
[code]....
Now When I type the following command, it throws an error:
SQL...> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
standby db /primary db in sync managed recovery working but
broker
show configuration
Connected.
DGMGRL> show configuration
Configuration - GenesisDR
Protection Mode: MaxAvailability
Databases:
orcl - Primary database
Warning: ORA-16629: database reports a different protection level from the protection mode
standby - Physical standby database
Error: ORA-16664: unable to receive the result from a database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
I decided to configure our current standby databases for administration in EM 12c via the "Manage an existing standby database with Data Guard broker". The first one went off without issue but on the second I got "ORA-16664: unable to receive the result from a database". I've scoured through everything and confirmed, more than once, that the tnsnames, listener and pwfile are all good to go. I can tnsping everything from both servers. The sby1 database is functioning fine and all log files are being transported and applied without issue from primary to standby, on different servers. I can connect via sqlplus to each database from opposite servers. I don't understand how I can do the below in DGMGRL:The listener doesn't not know of service requested (PRI1) and is unreachable in the first connect, but then I can turn around and successfully connect to PRI1 without issue?
DGMGRL> connect sys@sby1Password:Connected.DGMGRL> show configuration; Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Fast-Start Failover: DISABLED Configuration Status:ORA-12514: TNS:listener does not currently know of service requested in connect descriptorORA-16625: cannot reach database "PRI1"DGM-17017: unable to determine configuration status DGMGRL> connect sys@pri1Password:Connected.DGMGRL> show configuration Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Error: ORA-16664: unable to receive the result from a database Fast-Start Failover: DISABLED Configuration Status:ERROR DGMGRL> ;
why RMAN is unable to create physical standby database ?
RMAN> connect auxiliary sys/system@DGREPL
connected to auxiliary database: DGREPL (not mounted)
RMAN> connect target sys/system@REPL
connected to target database: REPL (DBID=2730563515)
RMAN> run{
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
[code]....
what is the configuration dba has do for enabling the "fast-start failover concept" in the event of loss of primary database without requiring any manual steps to invoke the failover.whether the configuration are to be made in parameter file if yes what are those ?
View 1 Replies View RelatedMy Data Guard 's Enviroment:
Primary: 11.1.0.7 RAC 2 Nodes
Standby: 11.1.0.7 Single Instance
I want to implement Fast-Start Failover at my enviroment. Reading requirements, I found that Oracle Flashback is needed (I don't use Flashback on my databases).
Best Practices recommends 60 min (1 hr) for DB_FLASHBACK_RETENTION_TARGET if I just want to use Flashback to fast-start failover.
My questions:
What 's better, setup up flash recovery area on ASM or O.S. filesystem?
What is the recommended size for flash recovery area?
I did standby before and it works wighout any disturbations and even configuration seems to me not very complicated - but it was before. now i am trying to do standby configuration once again. there is database named DESK.
two physical serwers:
sczepl-db07 - primary
r00979 - standby
on each for this serwer there is listener listening on port 1521, and on each is tnsnames configured properly:
for sczepl-db07
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sczepl-db07)(PORT = 1521))
[code]....
so why primary don't see standby db and claims that ther is no standby service? i proved that there is connection primary <--> standby.
Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. solve this? Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
[code]...
Issue : NOT able to start the Oracle Data Base 11g on Linux machine
I've successfully installed Oracle-DB-11g on my Linux machine.
Note : I haven't declared or exported any variable(s) , actually I'm not sure how and where to do this.
I have problems in opening the database of the physical standby in read- write mode/ read only mode. I have a primary server which is running on 2 node RAC and the standby on a seperate single server being used as DR. I recently got this server and my aim was to isolate the standby server from primary server and perform few test. As it has never been tested even once.
Primary Database spec: (2 Node Rac on ASM)
Oracle Version : 10.2.0.3.0
O/s : HP-UX B.11.23
Standby Database spec: (Single Node)
Oracle Version : 10.2.0.3.0
O/s: HP-UX db01 B.11.23
Error:
--------------------------------------------------------------------------------
alter database recover managed standby database cancel;
Database altered.
SQL> alter database open
2 ;
alter database open
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DATA/dprod/datafile/system01.dbf'
--------------------------------------------------------------------------------
Parameters :
log_archive_dest_2 string SERVICE=PROD1 LGWR ASYNC VALID
_FOR=(ONLINE_LOGFILES,PRIMARY_
ROLE) DB_UNIQUE_NAME=PROD
remote_archive_enable string true
fal_client string DPROD
fal_server string PROD1, PROD2
Steps tried so far:
Changed log_archive_dest_2 = DEFER on both the primary nodes
Standby :
startup nomount
alter database mount standby database;
alter database recover managed standby database disconnect;
alter database recover managed standby database cancel;
alter database open/readonly (tried both)
Same error.
On Primary:
SQL> select max(sequence#) from v$log_history;
MAX(SEQUENCE#)
--------------------------------------------------------------------------------
55702
on Standby:
MAX(SEQUENCE#)
--------------------------------------------------------------------------------
33289
Primary Database:
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIME NEXT_TIME
--------------------------------------------------------------------------------
55700 13-JUN-11 13-JUN-11
55700 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
55702 13-JUN-11 13-JUN-11
60824 rows selected.
Standby Database:
SEQUENCE# FIRST_TIME NEXT_TIME
--------------------------------------------------------------------------------
55698 13-JUN-11 13-JUN-11
55699 13-JUN-11 13-JUN-11
55700 13-JUN-11 13-JUN-11
55701 13-JUN-11 13-JUN-11
15206 rows selected.
Additional Information : There is a delay of 20 minutes before the logs get applied. which has been intentional set by team. Dataguard broker is not configured as well.
1) If i do changes in table on primary database and if i open standby database in Read-Only mode, i can see those changes immediately only if Real Time Apply is enabled. Am i correct? Database version is 10.2.0.4
2) From 11g, It is possible to apply redo while the standby is open in read only mode. prior to 11g, it was not possible. Right?
3) Should I first cancel Managed Recovery prior to issuing “ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY”?
I tried to run the duplicate script after transferring new rman backup to standby. Even after transferring the backup, duplicate command and was unable to open the database.
View 1 Replies View RelatedI am facing the problem in windows 7. I have oracle client 10g installed. When i run sqlplus from comand prompt it gives the error as:
C:Userssrirams>sqlplus
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
When I select the executable 'sql+' and run as administrator it works fine.
I ran the script "Duplicate target database for standby" but it unable to open the database. Below are the rman scripts -
calhost dbs]$ rman target sys/oracle@PRODDB auxiliary sys/oracle
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jun 25 06:09:33 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: PRODDB (DBID=558988263)
connected to auxiliary database: PRODDB (not mounted)
[code]....
Though I have taken the same backup but it's suggesting about the system datafile.
I'm getting an error when trying to use the new Data Pump Export/Import utility.
I am able to create a directory using SQLPLus, and I get the "Directory Created" message, but no directory actually gets created on the server.
SQL> CREATE DIRECTORY datapump AS 'C:Inetpubdatafiledatapump';
Directory created. But I dont see the directory created on the server.
Then on the server:
C:Documents and SettingsAdministrator>expdp ******/****** FULL=y DIRECTORY=datapump DUMPFILE=expdata.dmp LOGFILE=expdata.log
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
I have a dataguard configuration (physical standby).Database A is the primary database and database B is the standby database (I do not use the broker).Both are Oracle RDBMS 12cR1 EE. The Apply process uses the current log (standby redo logs).On database B, when querying v$managed_ standby;, I get:
ClientProcess process Status ---------- ARCH ARCH CONNECTED ARCH ARCH CONNECTED ARCH ARCH CONNECTED ARCH ARCH CONNECTED RFS ARCH IDLE MRP0 N/A APPLYING_LOG RFS LGWR IDLE
It works fine. Before to perform a switchover,- from database A (current physical database), I get switchover_status = 'TO STANDBY'- from database B (current standby database). I get switchover_status = 'NOT ALLOWED'. What switchover_status = 'NOT ALLOWED' means exactly and how to get further with the switchover?
[oracle@RSASPGERP02 ~]$ cd /
[oracle@RSASPGERP02 ~]$ . .bash_profile
[oracle@RSASPGERP02 ~]$ sqlplus / as sysdba
sql*plus:Release 10.2.0.4.0 - production
Error:
ORA-09925:Unable to create audit trail file
[code]....
its standby archieving problem ,the problem appears when try to connect directly or through telenet and we try to login directly using oracle user we receving following message and login fail, "GDM could not write to your authorization file,this could mean that you are out of disk space or that your home directory could not be opened for writting"
I am creating physical standby database through Rman duplicate command from 2 node rac cluster. rman do all its work. now am try to start the mrp process on physical standby database. I am getting following errors
------------------------------------------------------------
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
------------------------------------------------------------
ORA-16191: Primary log shipping client not logged on standby
------------------------------------------------------------
I copied the same pass file from primary to standby and many times verify the same but i got the same error.
I want to create a wallet on RAC setup.I have two node setup.I have created the wallet directory under shared folder /u01/oradata/$ORACLE_SID/wallet
I am Unable to open wallet.I tried this using the below command
SQL> alter system set encryption key identified by "aryabhat";
alter system set encryption key identified by "aryabhat"
*
ERROR at line 1:
ORA-28353: failed to open wallet
Following is the content of sqlnet.ora file
(path : /u01/app/11.2.0/grid/network/admin/sqlnet.ora)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /u01/app/oracle
ENCRYPTION_WALLET_LOCATION =
(SOURCE = (METHOD = FILE)(METHOD_DATA =
(DIRECTORY = /u01/oradata/$ORACLE_SID/wallet/)))
We have a requirement from the customer to start using data and index compression in our 11g database.. Is this something available in Oracle 10g,11g without any additional costs? We are not sure if this will work with our application so we will have to test it in-house, is it possible to compress the existing table data/index to test it out?
View 3 Replies View RelatedI got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies View Relatedcreating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies View RelatedHere we have a data guard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps. The steps executed in catalog database(appsdb):
SQL> create tablespace rmancatlog_tbs datafile '/u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend off extent management local segment space management auto;
SQL> create user rman identified by oracle
2 default tablespace rmancatlog_tbs
3 quota unlimited on rmancatlog_tbs
4 ;SQL> GRANT connect, resource, recovery_catalog_owner TO rman;
RMAN> create catalog;
recovery catalog created
Added tns entries of catalog database in primary and standby. Then from primary database we tried to register to catalog database. It is showing that it is registering. But every query afterwards in rman is throwing the error. Below are the steps and error:
[oracle@db1 ~]$ rman target sys/oracle catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1589015669)
connected to recovery catalog database
[code]....
Recently, I've just restored my QAS database and filesystem from my backup tape. I have checked all the configuration files and oracle setting files and do not notice any problem.
However, when I tried to start my listener, it shows some error messages as below. As a result, I'm unable to start my SAP application.
Error:
-------
Instance "QAS", status UNKNOWN, has 1 handler(s) for this service...
For you information, I'm able to start my Oracle instance. Please refer to below.
SQL> startup mount
ORACLE instance started.
Total System Global Area 5620367360 bytes
Fixed Size 2064184 bytes
Variable Size 2818572488 bytes
Database Buffers 2785017856 bytes
Redo Buffers 14712832 bytes
Database mounted.
oraqas 3> lsnrctl start
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 30-AUG-2010 12:57:25
Copyright � 1991, 2007, Oracle. All rights reserved.
Starting /oracle/QAS/102_64/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
System parameter file is /oracle/QAS/102_64/network/admin/listener.ora
Log messages written to /oracle/QAS/102_64/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS.WORLD)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=drqaecc)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=QAS.WORLD))
STATUS of the LISTENER
-------------------------------
Alias LISTENER
Version TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
Start Date 30-AUG-2010 12:57:29
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/QAS/102_64/network/admin/listener.ora
Listener Log File /oracle/QAS/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=drqaecc)(PORT=1527)))
Services Summary...
Service "QAS" has 1 instance(s).
Instance "QAS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully