Backup & Recovery :: Use RESETLOGS Or NORESETLOGS Option For Database Open
Dec 27, 2011When i try to startup database i got error like "ORA-01589: must use RESETLOGS or NORESETLOGS option for database open".
i want to open the database
ADVERTISEMENT
Backup & Recovery :: Open Database With ResetLogs Option
Mar 14, 2012When we open the database with ResetLogs option. Then in future is there a possibility of restoration from old log sequences.
View 5 Replies View RelatedBackup & Recovery :: ORA-01139 / RESETLOGS Option Only Valid After Incomplete Database Recovery
Jan 25, 2011SQL> alter database mount;
Database altered.
SQL> alter database open resetlogs;
alter database open resetlogs
*
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
Backup & Recovery :: ORA-01139 - RESETLOGS Option Only Valid After Incomplete Database Restore
May 21, 2013restored from tape a backup then issued rman command
RMAN> restore database;
Starting restore at 21-MAY-13
Finished restore at 21-MAY-13
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 05/21/2013 15:36:15
ORA-01190: control file or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: '/u02/oradata/system01.dbf'
[code]....
RMAN :: ORA-01589 Must Use RESETLOGS Option For Database Open?
Dec 4, 2012I am running 10.1.0 and the database went down and I have been trying to get it started again. I have worked through several errors but stuck on this one.When trying to run startup I get this error ORA-01589 must use RESETLOGS or NORESETLOGS option for database open.
View 7 Replies View RelatedOpen Resetlogs Is Not Working When Creating Clone DB With Online Backup
Jun 3, 2013I am trying to create a clone database using hot backup of a database .
STEPS THAT I FOLLOWED
------------------------------------
LET ----- >CURRENT_DB NAME=DEV
CLONE DATABASE NAME=DEVCLONE
steps PERFORMED FORM DEV DB
-----------------------------------------------
- put the database in backup mode using 'alter database begin backup'
- copy all the data files to a different folder
- during copy i have performed some operations on the DB (creating users, tables, dmls etc...)
- in between copying i also performed log switch
- after completion of copy , "alter database end backup"
- created a backup control file in a human readable format (alter database backup controlfile to trace as ........)
steps performed for clone DB side ((DEVCLONE)
-------------------------------------------------------------------
- created a parameter file for the database .
- modified the backup control file so that it will point to the location of copied destination of datafiles
- set the ORACLE_SID
- then 'sqlplus / as sysdba
- starup nomount
- run the modified control file ( created a control file for the clone database)
- recover the database using "recover database using backup controlfile"
I have provided the archive files that it was asking for (archive logs that has been generated in DEV DB)
then i canceled the recovery by typing "cancel"
- recover database using backup controlfile until cancel;
then typed "cancel"
- then try to open the database with open resetlogs but it showed below error
alter database open resetlogs
*
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:DATA_GUARDDEVHOTSYSTEM01.DBF'
Backup & Recovery :: Oracle11gR2 Not Allow To Open Database After Complete Recovery?
Feb 24, 2012My database is in NOARCHIVELOG mode.I took whole DB backup ( cold).Then just after half an hour I ran following script.
RMAN> RUN { RESTORE DATABASE;RECOVER DATABASE;alter database open;}
Starting restore at 24-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
[code]...
Starting recover at 24-FEB-12
using channel ORA_DISK_1
starting media recovery archived log for thread 1 with sequence 2 is already on disk as file /u01/app/oracle/oradata/PROD/redo02.log
archived log file name=/u01/app/oracle/oradata/PROD/redo02.log thread=1 sequence=2
media recovery complete, elapsed time: 00:00:01
[code]...
Why do I need to specify an option at the first place?As my redo is intact, it is not incomplete recovery and, I do not want to generate new incarnation of my database.Why oracle simply not opening my database?
Backup & Recovery :: Alter Database Open - ORA-01092?
Nov 2, 2011SQL> ALTER DATABASE MOUNT;
数据库已更改。
SQL> COL ERROR FOR A10
SQL> SELECT *FROM V$RECOVER_FILE
[code]...
i can't open the db.
Backup & Recovery :: Duplicate Target Database - Unable To Open
Jul 3, 2013I ran the script "Duplicate target database for standby" but it unable to open the database. Below are the rman scripts -
calhost dbs]$ rman target sys/oracle@PRODDB auxiliary sys/oracle
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jun 25 06:09:33 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: PRODDB (DBID=558988263)
connected to auxiliary database: PRODDB (not mounted)
[code]....
Though I have taken the same backup but it's suggesting about the system datafile.
Recovery Manager (RMAN) :: Recovery Catalog Option On Separate Database
Jun 7, 2013I am using RMAN with a recovery catalog option on a separate Database. My question is
When we use catalog does RMAN keep the information in Control file of the Target Database as well or only in recovery catalog? I am asking this in case We lost the database which contains the recovery catalog what to do?
Backup & Recovery :: Minimum Files Required To Open DB
Dec 26, 2012what are the minimum files which are required to open the db ? take it as this
I have oracle installed in c drive. I have placed 3 datafile related to one tablespace say test: two in D and one in E. I have place 3 datafile related to tablespace say orcl : two in D and one in E.
my undo is in E scenario is that my E drive crashed . db is in no archive mode . no backup is there. to be more worst db shuts down abnormally. I want my db open with data of c drive and D drive.
Not Able To Resetlogs After Recovery
Jul 16, 2012I am performing testing on the database recovery after upgrading my backup solution software. I attempted to restore from tape media that is dated back at April 1st. My colleague have perform the same recovery from the same tape media during middle of April.
After restore, I encounter some problem and I could no longer up the database anymore.
These are the steps I have taken to perform recovery. It is being perform when the database in mount mode
SQL> recover database using backup controlfile until TIME '2012-04-01:21:55:00'
ORA-00283: recovery session canceled due to errors
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/oracle/AP1/sapdata1/system_1/system.data1'
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORACLE instance started.
[Code]....
SQL> alter database open resetlogs; alter database open resetlogs *
ERROR at line 1:
ORA-01190: control file or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: '/oracle/AP1/sapdata1/system_1/system.data1'
Backup & Recovery :: ORA-16004 / Backup Database Requires Recovery
Oct 20, 2011Here is the details
[oracle@localhost dbs]$ export ORACLE_SID=stby
[oracle@localhost dbs]$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Oct 20 09:47:34 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> !
[oracle@localhost dbs]$ pwd
/oraeng/app/oracle/product/10.2.0/dbs
[oracle@localhost dbs]$ exit
exit
[code].....
Incomplete Recovery / Resetlogs On Just One Restored Datafile?
Feb 4, 2013Basic situation is this: Oracle 10g database, good RMAN backup from a few days ago. We lost one datafile due to storage corruption. I restored the datafile from RMAN, no problem, and started to roll forward with our archive logs. Problem: one log is corrupted, can't be read, no other copies of it. We are stuck, cannot roll forward any further. The database is up (all activity suspended for now) -- only this one file is offline. Everything else is fine.
My question: Can i do something similar to "open resetlogs" with just the one datafile? Most of what was in the file was indexes, which can be easily dropped & recreated. But a few extents were data which I want to retain. It's old data and the archive logs subsequent to the one on which we are stuck should be pretty much irrelevant. So if i can 'force' the datafile to open up, i believe we should be OK with the little bit of data that's in there, even if we don't apply the remaining archive logs. If it's not 100% consistent we can live with that.
RAC & Failsafe :: RMAN Backup / Unable To Open Database
Aug 31, 2013I tried to run the duplicate script after transferring new rman backup to standby. Even after transferring the backup, duplicate command and was unable to open the database.
View 1 Replies View RelatedBackup & Recovery :: Recovery Of Database From Crashed Host Server?
Jul 20, 2012Backgroud info:
host server crashed.
Database was not cleanly shutdown.
Database is not in archivelog mode.
Datafiles were saved.
My goal:I want to recover the database based on the available files.
My approach:
Install new database.
ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
shutdown database.
Place available dbf files in the location for new database, replacing existing files.
edit trace file to create new controlfile. Script is:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "newdatabase" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
[code]....
Backup & Recovery :: Restore RMAN Backup Of Database To A New Database
Jan 25, 2011I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED******************
configure channel 1 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
configure channel 2 device type disk
format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U';
CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
*******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN**************
rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental
rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND
CONNECT TARGET SYS/ORACLE@ORCL
*******************************************************
********INCREMENTAL BACKUP COMMAND*********************
RUN
{
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
BACKUP ARCHIVELOG ALL DELETE INPUT;
}
********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
Backup & Recovery :: Error While Backup On Windows 7 Client Of Oracle 11gR2 Database
May 2, 2011I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
Backup & Recovery :: ORA-19870 / Error Reading Backup Piece During Database Cloning
Mar 15, 2011I am trying to clone a database on another server with different direcory structure. So that path on the source db server are /u04 whereas on on target db server it would be /u03.
Since this I am testing it on small database initially I have kept all datafiles, backup and archivelogs at /u04 and /u03 on the source and target db servers respectively Now I have copied the backups from source db server to target and since path is changed, I cataloged it
However during restore I am getting
Quote:ORA-19870: error reading backup
Here are the session details
RMAN> catalog start with '/u03/oradata/db7fra';
searching for all files that match the pattern /u03/oradata/db7fra
List of Files Unknown to the Database
=====================================
File Name: /u03/oradata/db7fra/DB7/archivelog/2011_03_15/o1_mf_1_16_6qyvpb3w_.arc
File Name: /u03/oradata/db7fra/DB7/backupset/2011_03_15/o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
I have altered permissions on the backup files as well but of no use
oracle@dev-biz:/u03/oradata/db7fra/DB7/backupset/2011_03_15 $ls -ltr
total 545260
-rwxrwxrwx 1 oracle dba 12419072 Mar 15 13:52 o1_mf_ncsnf_TAG20110315T123008_6qypyrz2_.bkp
-rwxrwxrwx 1 oracle dba 3072 Mar 15 13:52 o1_mf_annnn_TAG20110315T125043_6qyr54to_.bkp
-rwxrwxrwx 1 oracle dba 426496 Mar 15 13:52 o1_mf_annnn_TAG20110315T125006_6qyr3zk4_.bkp
-rwxrwxrwx 1 oracle dba 14336 Mar 15 13:52 o1_mf_annnn_TAG20110315T123018_6qypyv5v_.bkp
[code].....
Backup & Recovery :: Backing Up / Restoring Oracle Database Via Entire Backup Of Server
Aug 7, 2012I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
View 2 Replies View RelatedBackup & Recovery :: Database Size Is 30GB Is It Recommended For RMAN Backup
May 22, 2012database size is 30GB is it recommended for RMAN backup
View 2 Replies View RelatedBackup & Recovery :: Database Recovery With Missing One Of The Archivelog
Feb 10, 2011I want to do the recovery of my database using the archive log files but one of the archive log in between is missing,
View 17 Replies View RelatedBackup & Recovery :: Restore Database From Obsolete Backup Using RMAN
Dec 13, 2011can we restore database from obsolete backup using rman
View 2 Replies View RelatedBackup & Recovery :: Backup Full Database Throws Error?
May 13, 2012SQL> SELECT * FROM V$VERSION;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
after i backup my database,i check the alert log ,i found the following errror:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
Mon May 14 09:19:42 2012
Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
[code]....
the trace number 26967 :
[oracle@shenzhengair archivelog]$ cat /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
/u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
[code]....
what does the error mean?
Backup & Recovery :: Taking Online Backup Of Full Database
Jan 29, 2011online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
View 1 Replies View RelatedBackup & Recovery :: How To Setup Database For Automated RMAN Backup
Mar 14, 2012How to setup the database for automated RMAN backup. like if we want to have a backup exactly at 8:00 PM IST. So how to configure it.
View 6 Replies View RelatedBackup & Recovery :: Backup Entire Database / Without Archived Logs
May 13, 2011Backup entire database, without archived logs, while the database is open for user activity and also This backup should be the base for an incremental backup strategy.
View 10 Replies View RelatedBackup & Recovery :: Apply The Backup Command To Each Database?
Feb 14, 2012I am admin of my actual server and I want to backup all databases for later use. For that this is my approach.
1 - List all databases on the system
2 - Apply the backup command to each database
Backup & Recovery :: RMAN Backup On DataGaurd Database?
Mar 4, 2011We are running a 5Tb database backup which takes really a long time to backup and impacts the performance in general during the backup. We got a DataGaurd database in place which we want to utilize to run the RMAN backup on to avoid performance impacts and just use DG database for backup and DR purposes. My Question is if we run the backups on DataGaurd Database, How would a RMAN DG database backup would clear the archive logs from Primary production and from DataGaurd Database during the backup process?
View 7 Replies View RelatedBackup & Recovery :: How To Perform Database Recovery And Up Database
Jan 16, 20121) i lost my control file number 'some loc'contol01.ctl
2) i have restore my old backup control file (single one).
3) while starting database i got error..
ORA-00214: control file '/...../control01.ctl' version 15166739 inconsistent with file '/...../control01.ctl'
how to perform database recovery and up the database?