step to create drill down reports...Find the manager and their employees Manager names are abc, def employees are abc manager employees are john, lilly. def employees are mark,syam
How can i acheive below format.
abc-manager
John
lilly
DEF--manager
Mark
Syam
I am trying to open report in parameter form in drill down report.
View 7 Replies View RelatedI had report A which drill down to report B. While drilling down to report B, The parameter form of report B should be displayed which accept parameter code and then open the report B. My parameter form is displayed but not accepting the input. i am using the hyperlink to display the second report. Is there any cgimap.bat file to be configured for the parameter report? If yes then how to configure this file?
View 1 Replies View RelatedA drill-down report (B) is called from another drill-down report (A) which opens correctly, but when I close report (B) all reports including the master report are closed automatically.
View 4 Replies View RelatedI'm calling sub drill-down report (Report C) from a drill-down report (Report B) using buttons. Report opens correctly but when I tend to close the sub drill-down report (Report C), all reports in hierarchy including the main report (Report A) also close down after raising an exception "An un-handled win32 exception raised in RWRBE60.EXE [3300]"
Report Calling Sequence:-
Main Report => Drill Down Report => Sub Drill Down Report
I am building an application to edit database data through interactive reports. I would like to add a button to open a pdf file of the report, where the user can save or print it. I tried going to Shared Components>Report Queries and then create. I went through the steps but when I get to the end where it says "Test Report" I get this error:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified
What can i do to fix this, or is there an easier way to do this?
I am using APEX 4.0.2.00.09
This app will be distributed to other computers if that makes any difference.
I need to create a Radar Chart, this kind of chart isn't avaible on APEX then, I should buid it, I have found some models of this chart, but I'm not getting sucefull when I try to use the data from my database.
I'm using APEX 4.1.
As far as I know, in APEX 4.0 no other user other than the one who created a Public report can delete it. Can this behavior be changed somehow?
View 3 Replies View RelatedI would like to know if it is possible to organizing both private and public saved reports into a sidebar (Tree view)....that would allow for the reports to be saved into Folders/Categories.
View 0 Replies View RelatedWhen users are selecting a saved report on a given Interactive Report, they must search the entire list of saved reports for that IR because the choices are not sorted. Is there a way to improve the order that the choices are displayed in?
View 2 Replies View RelatedI have two SQL reports on the same page.
Those SQL reports are built with apex_items. Afterwards I'm updating them with a manual process (apex_application.g_fxx for ..loop). I'm using different IDs on both reports for the apex_items.
It's working fine for the first report displayed. But not for the second one. If I swap the two reports, it's always the first that will be updated.
Does it mean that we cannot use the apex_application to update more than one report and that I have to use a page per report?
I'm using APEX 4.0.0.00.46
I am using "Function Returning SQL Query" (as query is dynamic) to draw the bar chart (flash).
I am facing some issues while trying creating a BI report for this chart.
Issue is : In Shared Components -> Report Queries : Its only expecting an SQL Query.
Do we have any ways to define a "Function Returning SQL Query" over here ? Note that, If using a static SQL both charts / BI reports are working fine with out any issues.
How to integrate ssrs reports in oracleapex application
View 0 Replies View RelatedI am using APEX 4.0 and have a task of implementing the old tabs (older versions of APEX) for the IRR when they are saved. My users are not a fan of the select list when the IRRs are saved. I have located a site [URL] .....
that has this implemented but the tabs are not displaying within my application on apex.oracle.com, only the saved report names with no spacing. getting the tabs to display and/or possibly adding a dash (-) between each saved report name?
I added a Report Region as a 'PL/SQL Dynamic Content' and added code below in the Source. Am I missing anything to get the tabs to display like the example?
DECLARE
CURSOR cur_saved_ir (p_app_id IN NUMBER, p_page_id IN NUMBER, p_user IN VARCHAR2)
IS
SELECT '<span id="'||REPORT_ID||'" onclick="gReport.pull('''||REPORT_ID||''')">'||
[code]...
I am having the table columns called
level1_name, level2_repemail, level2_name, level2_repemail, level3_name, level3_repemail,
using this columns i would like to create a report region as mentioned below.
------------------------------------------------------------------------------------------------------------------------------------------------------|
TITLE |
-----------------------------------------|---------------------------------------------------|--------------------------------------------------------|
Lvl 6 | Lvl 7 | Lvl 8 |
-------------|---------------------------|---------------------------------------------------|--------------------------------------------------------|
Name | Rep | Name Rep | Terr Name Rep |
-------------|---------------------------|-------------------|-------------------------------|--------------------------------------------------------|
AP | aaa@gmail.com | AAA | bbb@gmail.com | AAA bbb@gmail.com |
AP | aaa@gmail.com | BBB | bbb@gmail.com | BBB bbb@gmail.com |
AP | aaa@gmail.com | CCC | bbb@gmail.com | CCC bbb@gmail.com |
AP | aaa@gmail.com | DDD | bbb@gmail.com | DDD bbb@gmail.com |
-------------------------------------------------------------|-----------------------------------------------------------------------------------------|
how can i create this type of report.
I am using ORACLE 11G, and APEX 3.2 .
MONTHSTAT_NAMEPERCENTAGE_OF_TOTALApr-08USER_TIME35.43Apr-08SYS_TIME3.74Apr-08BUSY_TIME38.33Sep-13USER_TIME42.92Sep-13BUSY_TIME45.54Apr-08IOWAIT_TIME20.12Aug-13SYS_TIME2.43Aug-13IOWAIT_TIME0.04Aug-13BUSY_TIME45.05Aug-13USER_TIME42.59Sep-13SYS_TIME2.52Sep-13IOWAIT_TIME0.04select null, month, stat_name, Percentage_of_Total from oshistory
I want to create 3d column chart for above chart.
I want to build a custom authentication scheme which combines the funcionality of of SSO and a custom authentication function.
1. If the HTTP Header Variable REMOTE_USER is set, this user should be a valid logged on user. (Single Sign On functionality)
2. If the HTTP Header Variable is not set, the LOGIN-Page should appear. (local user Administration)
3. The user/password combination from the login page should be validated by my own authentication function I think I have to create a sentry-Function, which is a combination of the sentry-functions which are used in the schemes "custom" and "HTTP Header Variable". I tried to find an implementation of these functions in the APEX_040200 database scheme, but without success.
Task is to create application for almost 10,000 PHD Scholors, i want to know which authtication scheme i used so that each Scholor can access his/her data only after authtication (Login Page).
View 4 Replies View RelatedI have two tables, one with the customer address and another one with a note. May I know how to create a separate PDF file (for each customer) that should start with the customer name/address (from customer table) and followed by a note (from the note table)
View 35 Replies View RelatedI have 4 reports on the same page. I have added a checkbox column to each one. On clicking I want to populate a collection with the value of the id of the corresponding row and then have a button acting on the whole list.
My code to get the id of the item that contains the value I want is this
id = 'f02_' + $(this.triggeringElement ).attr('id').substr(4,4);
But there is an f02_0001 for each report, and the code just finds the first one, rather than the one in the context of the report being clicked.
<input name="f02" id="f02_0001" type="hidden" value="2072"/>
....
<input name="f02" id="f02_0001" type="hidden" value="2052"/>
...
etc etc.
All that is ever picked up is 2072
They have different table ids but I don't know how to reference the correct ones in my code.
i want to create tab menu like in sumneva site URL.....
View 13 Replies View RelatedI created an report and made it accessible as Restfull server. When I checked the url, I got an XML back. So the service is working.
As test I wanted to create a webservice reference to that same page, but receive ORA-06502 PL/SQL: numeric or value error: hex to raw conversion error whenever I test the service. I tried all kind of options.
Settings:
URL ...........
HTTP MEthod : GET
Parameters
app
page
reportid
(and even parmvalues, lang, output)
outputformat : XML
When I test this service I receive above error. I use Apex 4.1
How to create more than 1 body in a single region. E.g i created report region and under body tag in region all other charts reports are created.
i dont want that .. i want to create different bodies in a single region.
I have a number of reports subregions in a page . Each of reports sub-region has a HTML text and a cell (report with a single column ) having a count sql . Now , the problem is that the HTML text in some below sub-regions are not getting displayed .. Is there a limit on the no. of sub regions???? Can there be any alternative way to display all the HTML text and the corresponding count sql in a page .
View 1 Replies View RelatedI have been tasked to look at a technology / frameworks that will allow our company to develop tools that is quick and easy to learn and easily supported. We use Oracle architecture extensively in the organization and also have APEX 4.2 installed for development purposes. We have two basic requirements or functionality that we need to implement and I and now looking at a proof of concept to determine whether we should adopt APEX or not.
1. Forms Based Tools
We have many databases with static content and users would like to have access to the data via a form. The form will allow the user to enter parameters (eg date) and on hitting a "Submit" Button, the database will be queried and a report generated and presented.
2. Diagnostics Tools
This is a bit more involved and we require a view of our static data in real time. If a specific KPI threshold is violated (eg MOC < 85%) we would like to present an alarm on a dashboard showing the alarm. For example if there are 5 entities that MOC < 85% we would like to show a "red" indicator. If no entities violate a threshold and are above MOC > 85% we want to show a green indicator. We also want a drill down function, where if the indicator is "red", a drill down will show the details of all the entities that have violated the threshold.
I have described our basic requirements, but if it can easily be done in APEX we will definitely motivate for its use.
I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.
I've also read that in order for that score to be determined that the column(s) need to be indexed with a CONTEXT index. Non of the columns in the tables are indexed with a CONTEXT index, however, when I put a value in the Expression box for a column I get a record returned.
If I run the same query in PL/SQL Developer like:
SELECT <column>
FROM <table>
WHERE contains(<column>,<search text>,1) > 0;
I get an error that the column is not indexed, so how does it work in APEX?
i am using Apex 3.2 ver.
i want to use below code in LOV select list
BEGIN
IF UPPER(:P23_SERVICE_TYPE) like 'GUIDE%' THEN
SELECT NAME D, CODE R FROM SPECIAL_SERV_MAS
WHERE NVL(ACTIVE_FLG,'N') = 'Y'
AND NVL(GUIDE_FLAG,'N') = 'Y'
and CITY_CODE LIKE NVL (:P23_CITY_CODE, '%')
[code]....
When i put this code in my LOV Select list Section then display me Error
Not Found The requested URL /pls/apex/f was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at tidevserv1 Port 7777
how to create tabs with drop down submenu items like the ones we have under products tab in the link below.
[URL]
I am stuck at point.
using apex 4.1, created tabular form for inserting values from customer with a simple query
table name : customer
select
USER_ID ,
USERNAME,
PASSWORD,
STATUS,
PRODUCT_ID
from CUSTOMER
I WANT TO FETCH THE NAME OF PRODUCT FROM ANOTHER TABLE NAME PRODUCT_NAME, I WANT THAT WITH TABULAR FORM COULMN OF PRODUCT NAME IS ALSO DISPLAYED, HOW I DID THAT ? JUST WANT TO ADD COLUMN FROM ANOTHER TABLE IN TABULAR FORM.
WHEN I ADD TABLE NAME IN FIRST QUERY IT IS NOT WORKING GIVING ERROR ABOUT NOT JOINING THE TABLE
i have create service rate card Form for transport Service and i have declare transport component into master lookup table .There is 11 component into master.To Difine rate for a particular transport service i have insert these component name with there rate into another table transport_rate _card.
To do this i have created page with these 11 component name item and there 11 rate item to enter component rate with respective services. Problem is if i create 11 component name text item and 11 text item to enter there conmponent rate but if user add 3 or 4 or 5 more componenet name into master then i'll be need to add extra component name text item and component rate text item.so i need to create form where if user add more component into master then component name item and component rate item should be increase automaticaly.
How i can create form where item added auotmaticaly acording to component which are exist into master table. there is only component name into master table.
