Task is to create application for almost 10,000 PHD Scholors, i want to know which authtication scheme i used so that each Scholor can access his/her data only after authtication (Login Page).
View 4 RepliesWe just upgraded from Application Express 4.0.2.00.07 to Application Express 4.2.2.00.11. We are using one common application to authenticate and redirect to other applications.
We use the following code:
wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => '2000:1' );
We start to get the following authentication error after the upgrade. There is no authentication configured for this application.
ORA-1403: no data found This is the same code we used from htmldb 2.x through Apex 4.0.2.00.07.
We are close to successfully getting our CAS authentication integrated with Apex Listener 2.0 and Apex 4.2.1. We are using Weblogic app server for the Listener configurations and have been able to get the remote_user passed to Apex after login to CAS. We just set the header variable in the new 'HTTP Header Variable' authentication scheme. However there is a glitch at the callback from CAS -- we get the error 'wong number of types of arguments in call' and the URL shows: ..... /apex/apex_authentication.callback.
I see the documentation about this CALLBACK procedure, but am not sure how to set it to go back to the application. I know that CAS is working and passing the userid to the application because I can manually type in the app URL .... /apex/f?p=xxx and I immediately get into the application and the correct userid is identified --whereas initially when I hit the same application it sends me to our Central CAS server for login.
where the parameters of this procedure need to be set and how to set them. I assume the procedure needs to be called by Weblogic?for the callback to find the original calling application so it doesn't have to be 'hard-coded'. I see that one of the parameters is 'p_app_id'. I think our Weblogic engineer was assuming the call to that procedure would 'take care' of the return to the original calling application but obviously we have missed some configuration.
Apex 4.1.1 or 4.2 -
I do not see an option in web sheets to use HTTP Header values for authentication. Any workaround in order to use OAM for authentication to web sheets?
Am trying to use the same username and password of ebs to my standalone(not integrated with EBS) application. Am using apex 4.2 and Oracle Database 11g Enterprise Edition
CREATE OR REPLACE FUNCTION ebs_authenticate (
p_username IN VARCHAR2,
p_password IN VARCHAR2
)
RETURN BOOLEAN
AS
BEGIN
RETURN (APPS.FND_WEB_SEC.validate_login (p_username, p_password) = 'Y');
END ebs_authenticate;In Before Header Process
Get Username Cookie :
:P101_USERNAME := apex_authentication.get_login_username_cookie;Set Username Cookie Process :
begin
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
name=>'LOGIN_USERNAME_COOKIE',
value=>lower(:P101_USERNAME));
[code].........
If i give ebs username and pwd means, it is not logging in as it is showing invalid login credentials.
Our apex currently has LDAP authentication scheme. We have many applications within the workspace. We are looking for a way to have one authentication scheme defined for all the applications so that user doesn't have to enter username/password for each application. How can I share my LDAP authentication scheme for multiple applications.
View 4 Replies View RelatedI have 20 or so tables, partitioned by range, indexed etc...soon these tables will be gone and i have to recreate them with the same definitions. I have to write a procedure(or script, it's up to me) which must:
1- check if table A exist in the scheme
2- if not create the table as the original ddl.
for 1 i've used smth like
-------------------------
SELECT count(*)
INTO a
FROM user_objects
WHERE object_name='A';
[code]....
so my question is how and what is the cleanest and fastest way to do this.? it's a lot DDLs,
I have got single sign on working via the built in LDAP Directory authentication in APEX. But at the moment this is letting everyone who is within AD log inHow can I assign role permissions to each logged in user so some users have an admin role and see certain parts of the application / pages / navigation items while editors and readers have different permissions
And also to restrict access to certain pages within the application
I am trying to use embedded weblogic server for creating an LDAP authtication secheme but it is not working
I believe that embedded ldap server works on the same port as the admin server of the domain but configuring it has been a pain. I got the following code from forum to test the ldap connection
declare
l_retval pls_integer;
l_retval2 pls_integer;
l_session dbms_ldap.session;
l_ldap_host varchar2(256);
[code]........
Every time I run this, I get the following error
ldap session : 01000000(returned from init)
error: ORA-31202: DBMS_LDAP: LDAP client/server error: Invalid credentials
-31202
I am using SSO login for Authorizations. Would like make use of SSO for creating authentication schema. My main requirement is to assign privilege based on users using SSO loging.
View 0 Replies View RelatedIs it possible to use Database authentication in APEX through database link, and how?Also is it posible to read roles from users through database link?
View 3 Replies View RelatedI need to create a Radar Chart, this kind of chart isn't avaible on APEX then, I should buid it, I have found some models of this chart, but I'm not getting sucefull when I try to use the data from my database.
I'm using APEX 4.1.
Can application connect with windows authentication to oracle 11.2.0.3 database? if so then how can i set it up!
View 3 Replies View RelatedI am having the table columns called
level1_name, level2_repemail, level2_name, level2_repemail, level3_name, level3_repemail,
using this columns i would like to create a report region as mentioned below.
------------------------------------------------------------------------------------------------------------------------------------------------------|
TITLE |
-----------------------------------------|---------------------------------------------------|--------------------------------------------------------|
Lvl 6 | Lvl 7 | Lvl 8 |
-------------|---------------------------|---------------------------------------------------|--------------------------------------------------------|
Name | Rep | Name Rep | Terr Name Rep |
-------------|---------------------------|-------------------|-------------------------------|--------------------------------------------------------|
AP | aaa@gmail.com | AAA | bbb@gmail.com | AAA bbb@gmail.com |
AP | aaa@gmail.com | BBB | bbb@gmail.com | BBB bbb@gmail.com |
AP | aaa@gmail.com | CCC | bbb@gmail.com | CCC bbb@gmail.com |
AP | aaa@gmail.com | DDD | bbb@gmail.com | DDD bbb@gmail.com |
-------------------------------------------------------------|-----------------------------------------------------------------------------------------|
how can i create this type of report.
I am using ORACLE 11G, and APEX 3.2 .
MONTHSTAT_NAMEPERCENTAGE_OF_TOTALApr-08USER_TIME35.43Apr-08SYS_TIME3.74Apr-08BUSY_TIME38.33Sep-13USER_TIME42.92Sep-13BUSY_TIME45.54Apr-08IOWAIT_TIME20.12Aug-13SYS_TIME2.43Aug-13IOWAIT_TIME0.04Aug-13BUSY_TIME45.05Aug-13USER_TIME42.59Sep-13SYS_TIME2.52Sep-13IOWAIT_TIME0.04select null, month, stat_name, Percentage_of_Total from oshistory
I want to create 3d column chart for above chart.
I want to build a custom authentication scheme which combines the funcionality of of SSO and a custom authentication function.
1. If the HTTP Header Variable REMOTE_USER is set, this user should be a valid logged on user. (Single Sign On functionality)
2. If the HTTP Header Variable is not set, the LOGIN-Page should appear. (local user Administration)
3. The user/password combination from the login page should be validated by my own authentication function I think I have to create a sentry-Function, which is a combination of the sentry-functions which are used in the schemes "custom" and "HTTP Header Variable". I tried to find an implementation of these functions in the APEX_040200 database scheme, but without success.
I have two tables, one with the customer address and another one with a note. May I know how to create a separate PDF file (for each customer) that should start with the customer name/address (from customer table) and followed by a note (from the note table)
View 35 Replies View Relatedstep to create drill down reports...Find the manager and their employees Manager names are abc, def employees are abc manager employees are john, lilly. def employees are mark,syam
How can i acheive below format.
abc-manager
John
lilly
DEF--manager
Mark
Syam
i want to create tab menu like in sumneva site URL.....
View 13 Replies View RelatedI created an report and made it accessible as Restfull server. When I checked the url, I got an XML back. So the service is working.
As test I wanted to create a webservice reference to that same page, but receive ORA-06502 PL/SQL: numeric or value error: hex to raw conversion error whenever I test the service. I tried all kind of options.
Settings:
URL ...........
HTTP MEthod : GET
Parameters
app
page
reportid
(and even parmvalues, lang, output)
outputformat : XML
When I test this service I receive above error. I use Apex 4.1
How to create more than 1 body in a single region. E.g i created report region and under body tag in region all other charts reports are created.
i dont want that .. i want to create different bodies in a single region.
i am using Apex 3.2 ver.
i want to use below code in LOV select list
BEGIN
IF UPPER(:P23_SERVICE_TYPE) like 'GUIDE%' THEN
SELECT NAME D, CODE R FROM SPECIAL_SERV_MAS
WHERE NVL(ACTIVE_FLG,'N') = 'Y'
AND NVL(GUIDE_FLAG,'N') = 'Y'
and CITY_CODE LIKE NVL (:P23_CITY_CODE, '%')
[code]....
When i put this code in my LOV Select list Section then display me Error
Not Found The requested URL /pls/apex/f was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at tidevserv1 Port 7777
how to create tabs with drop down submenu items like the ones we have under products tab in the link below.
[URL]
I am stuck at point.
using apex 4.1, created tabular form for inserting values from customer with a simple query
table name : customer
select
USER_ID ,
USERNAME,
PASSWORD,
STATUS,
PRODUCT_ID
from CUSTOMER
I WANT TO FETCH THE NAME OF PRODUCT FROM ANOTHER TABLE NAME PRODUCT_NAME, I WANT THAT WITH TABULAR FORM COULMN OF PRODUCT NAME IS ALSO DISPLAYED, HOW I DID THAT ? JUST WANT TO ADD COLUMN FROM ANOTHER TABLE IN TABULAR FORM.
WHEN I ADD TABLE NAME IN FIRST QUERY IT IS NOT WORKING GIVING ERROR ABOUT NOT JOINING THE TABLE
i have create service rate card Form for transport Service and i have declare transport component into master lookup table .There is 11 component into master.To Difine rate for a particular transport service i have insert these component name with there rate into another table transport_rate _card.
To do this i have created page with these 11 component name item and there 11 rate item to enter component rate with respective services. Problem is if i create 11 component name text item and 11 text item to enter there conmponent rate but if user add 3 or 4 or 5 more componenet name into master then i'll be need to add extra component name text item and component rate text item.so i need to create form where if user add more component into master then component name item and component rate item should be increase automaticaly.
How i can create form where item added auotmaticaly acording to component which are exist into master table. there is only component name into master table.
I have a number of pages containing charts and gantts. I want the user to be able to filter the data shown in these various charts. More than that, I want the user's filters to persist between pages. So, if they select "Key project = 'Y'" on the gantt page, the gantt will filter - and if they then navigate to a report (bar chart) page, that will also be filtered for Key projects only.
To make this happen, I plan to have an identical sidebar on all these pages. This will contain maybe 8 dropdowns and tickboxes allowing the user to create or remove these filters. Eventually some users might save preferences for certain choices within these dropdowns.
Since the sidebar will almost always be identical from page to page, the smartest approach would seem to be to create one sidebar (as html region) and access that sidebar from all pages rather than copying the code from page to page. Then I thought I'd create application-level items in order to create global variables for each of the dropdowns.
My question is: is this approach possible? And can I create a "global" region in Page 0 and then access it from other pages? (This is how I thought it would work but I have tried and can't see how to do it.)
APEX 4.1
11g db
Internet explorer 8
I have a region with 4 fields - ID, name, address, telephone. A user can search on any one of theses fields, depending on which field they search on the query is different e.g. Searching on telephone is a different query to searching on address. The query will bring back the same columns, so I just need one report.
How do I create a report where depending on the field the user searches on, it uses the same report but different query.
On package application "Customer Tracking", there is good example about Modal Page. Quite simple but it work quite nicely.The step to create this Modal Page:
- Create new region, set display point: After Header and use region template: Modal Region and set the Static ID (eg. ActivityModal)
- Create the page item and put it on the above region (eyample: Name, Company etc.)
- Create a button, set the action to "Redirect to URL" and enter the URL target to: javascript:openModal('ActivityModal');
Now when you click on the button, the modal page will be display.How can I pass a parameter to the modal page, example: I want to pass text 'Johnny' to the Name page item which is on the modal region.
I have to develop an application for a store, where some material In and Out on daily basis. and i want to see current status any time.
How to do that means coding of stored procedure, on whose basis i can create material IN and OUT form.
My collection is not working as expected, what could be the issue here. This is what i did,
1. I created a collection in a process to fire on page load
if apex_collection.collection_exists(p_collection_name=>'MMMM') then
apex_collection.delete_collection(p_collection_name=>'MMMM');
end if;
APEX_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(p_collection_name => 'MMMM');
2. On my page i have a text field P1_text1 when i enter value into text field like ="sample data" i want this data loaded into my collection, so i created a button and added a process(on submit - before computations...) so it should insert into the collection when i click the button but no data is loaded, process:
APEX_COLLECTION.ADD_MEMBER(
p_collection_name => 'MMMM',
p_c001 => :P1_TEXT1,
p_c002 => 'TESTDATA' );
3. when i run the below query it shows "no data found" ,
SELECT c001,c002
FROM APEX_COLLECTIONS
WHERE collection_name = 'MMMM';