Application Express :: How To Prevent Screen From (Jumping) During Report Refresh
May 4, 2013
I'm using Apex 4.2.1 against Oracle 11gR2 and mod_plsql.I've created a page containing two classical reports and an editable tabular form, with the form needing to be positioned at the page bottom.
The tabular form contains the usual buttons Apex creates by default such as "Add Row", "Save", and "Delete". Whenever users click any of these buttons, the entire page "jumps" and the mouse cursor goes to the very top of the page. Very disconcerting as well as frustrating since users must constantly scroll down to where the form is to see if a row was added or deleted.
I have set the tabular form region to "Partial Page Refresh". No effect.I have also created a dynamic action triggered on a button click (say the "Add Row" button) and whose action is to refresh the specific tabular form region. Again, no effect.
Even with both of these interventions, implemented individually as well as in combination, still has my page jumping and the mouse cursor at the top of the page whenever users click any of these form buttons.
I have created a IR report and I set the default search column using the suggestion found in the thread URL....but how can I keep this default even after the research was done?Now it is resetted !
I am on APEX 4.1.1, db 11g and I have a report which is quite slow to retrieve results from its query. The page has some filter fields (e.g. store code, dept code) in addition to the generic search field.
When the user lands on this page (from a menu page), the query runs before the page displays and this typically takes 1-2 mins without any filters yet set. The usual browser loading indicators are not obvious to the user and they might not be aware that it is working on the request.
I want it so that it will only run the query AFTER allowing the user to get to the page, let the user fill in some filter criteria and then click on the GO button. Therefore the query will run after the page is submitted. When you hit the GO button on the interactive report, a nice rotating apex_loader.gif appears, making it obvious to the user that it is working on the request.
I would prefer NOT to create 2 pages, one for user filter, and a second for the actual report as I have many reports/inquiries which fit this category and I would prefer NOT to have to create pairs of pages for each.
We have several interactive reports setup and some of them can display more than one screen of data at a time, depending on the results returned.
All of the reports have prev/next pagination links at the top and bottom of the reports. For the longer reports, if you click prev/next at the bottom of the reprot, the prev/next page will display. But, you will still be at the bottom of the page/screen. Is there a way to force the report to return to the top of the page/screen when prev/next is clicked?
I have an application that I'd like to prevent activity in after a certain time of day, say 3pm. Is there any way I can force logout of all current users and then prevent re-login until 9am the next day (short of deleting all of their login credentials and then recreating them the next morning)?
Im my application, after login, I have a hidden & protected item whose value I am setting based on a logic. Also I would like to access this item's value in a application process, so session will have this value. Now I do not want anybody to be able to change the value of this item. For Eg, if my item was P1_RESP, I was able to change its value in the following way, I have an edit link on somr IR, where I redirect to another page passing some values and the URL looks like : [URL] After the browser loads, I can edit the above URL to below and click enter, [URL]
While I try to download a file using the below code; an HTTP 404 error is coming although the proc is being called and the parameter is correctly being passed.
create or replace procedure download_myfile1(p_id in number) as v_mime varchar2(255); v_length number;
[code]...
It shows a POP up window by which u can save or opens the file. But no pop up displayed in this case.
When I see the apex dashboard in the IE or google chrome, part of screen goes missing.Last part of dashboard doesn't come but it works fine in Mozilla Firefox.What should I do? Is there some settings I need to do in IE.I am using the IE version 9.0 for 64 bit.
I'm setting up APEX REST security by following the instructions from [URL]...Everything works great according to document.
I can acquire a token, then passing it in the header to get needed data from REST service. Consumer acquires an token by going on web browser to [URL]...
It will be redirected to[URL]... asking for username and password on browser. Once entering them correctly, it will be directed to Redirect URI defined in the OAuth2 client with the token in the URL.
My question is that is it possible to do token acquiring by coding (like in Salesforce) without going to web browser? We've tried doing that, it will stop due to redirect to sign-on.
I installed and configures APEX in standalone mode about 2 weeks ago and played with it for short time. Now after 2 weeks I came back to start where I left off but APex_admin page would not come up.
I did following tasks as were found on Installed Apex on Oracle 11g. But cannot access admin screen
SQL> SELECT STATUS FROM DBA_REGISTRY 2 WHERE COMP_ID = 'APEX'; STATUS ----------- VALID SQL> conn sys as sysdba Enter password:
[code]...
warning me that XDB requires username password to be sent through insecure manner (Basic authetication without a secure connection
I have a requirement in which on Change event of shuttle, the tree present in another region of the same page should refresh. On refresh, the tree should include the values selected on the right hand side of the shuttle as its nodes.
I have some troubles with a "Set Value" Dynamic Action. What I want to do is set a Page Item with a specific variable derived from javascript. So basically I have a javascript variable 'test' that is being changed in javascript code. I am using a dynamic Action "Set Value" to set this value into a page item. As source, Im using "Javascript Expression". It is working, however, the Set Value Dynamic Action with JAvascript expression does not reflect this change in the session, so the page item is not updated.
I tried:
$s -> does not work apex.submit -> does work, however submits the page. I need to submit only the Page item.
I have an APEX page with a master and a detail. The master is a classic report with a column link which sets an hidden item on my
page:javascript:$s('P280_DAK_ID','#DAK_ID#');
I have a dynamic action which reacts on change of the item P280_DAK_ID.It then refreshes the detail region which is a PL/SQL region with the following:
begin apex_p280.show_xml(p_dak_id => v('P280_DAK_ID'));end;
This prints a few pieces of text to the screen, nothing special. Everything works except the refresh of the detail region.This is due to the fact that the new value of P280_DAK_ID is not in the session state yet. So my question is: what would be a nice solution to set the item in the session state without a submit? With a normal region I could fill in 'Page items to submit', but with a pl/sql region I can't.
1.) So I have a page, call it Page1. I do some 'not very important' things on this page, and then I use a dynamic action to open a new page, call it Page2.
2.) I do some other things on Page2, and then close it.
3.) It just so happens that when some things are changed on Page2, some things are changed on Page1.
4.) When I close Page2 I do not see those changes, because it needs to be refreshed or reloaded. So, I would like to be able to--from any page--reference this page and refresh it. I come from an object oriented language background.
I used to have a button, that called an after submit page process and everything ran fine.The page had loads of buttons, so I got rid of the buttons and created a list instead.I have an entry in a list. Target Type: Page, Page 1, Request is set to RUN_PLAN.This calls a before header page process with a condition of Request = Exp1 and Exp1 is set to RUN_PLAN. When the user clicks the list item, the process is run. This works fine.I also have a report on this page.As the process runs, it is updating a table.The user needs to watch this process running (via the report), so they need to keep refreshing the page.The problem is, that when they refresh the page via the browser refresh button the process is called again. How can I stop the process from running, every time the user refreshes the page.
Having this issue in Apex 4.1.1 and 4.2 (haven't tried it in versions prior to 4.1.1 yet). So I got my standard IR, and trying to create a private report with control breaks, aggregations.
Once I save it as a private report, It applies the same on my primary report.
It's no big issue as I can flip back to Primary report and delete the control breaks, aggregations but is some kind of bug? Ideally it shouldn't modify my primary report unless I try to save it as "Default Report Setting".
I have a Page containing 3 reports and I was wondering if it is possible to re-execute only one of the these reports using a button or preferably a Select List which allows me to choose which of the 3 reports I wish to 'refresh/re-execute'. I may be totally wrong here but I assumed that choosing the option to submit a Page will cause all regions to refresh i.e. re-execute the SQL queries they are 'based on'.
I have a Report Region with Type SQL Query and Source "SELECT * FROM <table>" where <table> has a primary key from a sequence. Under Report Attributes, I have Report Column "ST_NM" with Show and Sort checked and having a Sort Sequence of "1". I assume this is to set the iniital display sequence but regardless, the report rows display in Primary key order initially.
To try it: [URL]
1) How do I set the initial display sequence to be other than the primary key sequence?
What is the code/javascript/url behind the test report button on report queries component?
We are having DSN problems using the print url given on the report query. The URL works for some of our developers and not for others.
The test report button on the report query appears to work for everyone but I do not know what is behind the "Test Report" button. If I could recreate the test report button on our page this would be GREAT!
I have to implement IR report search functionality (*when ever we click on column header it will display all the values in that particular column , once we click on particular value , the report will filter based on that particular value * ) in classic report .
I have created a classic report in Apex. Have enabled the print PDF link on the report for the business users to download it in a PDF format. Is is possible to put a logo in a downloaded PDF from the report?
Event: click. type: jquery selector selector: a.show_popup no condition.
action: skillbuildersmodalpage 2.0.0 URL: attribute of triggering element.
This works fine, but after the popup is shown and closed, the link is not working until the page is entirely refreshed again.
after the popup is closed, i only refresh the report with $a_report , ( in another dynamic action on the "auto close skillbuolders" event) i don't want to submit all the page....the partial refresh is working fine too, but not the link, it only works again by refreshing or submiting all page
select "ID", "NAME" from #OWNER#.COUNTRYSELECT c.id , c.country_id , c.name FROM city c WHERE c.country_id = :P2_country_id ORDER BY c.ID DESCP2_country_id it's a hidden item
i create dynamic action event click ,
type item (P2_country_id) , condition equal to country_id true action refresh region (city report)
i want when click on row in country report , set values that related with city , how can i do that ?
I have a problem when I want to edit a row in a report. I have created a form with report, and now when I click on the edit icon on the report page, it navigates me to the form page but without the row data .
I created a report and in this report there is a likeable colummn and when its been cliked I need its show a message box containing a text that cames from field on a tables in my database.
I have a javascript code, which refreshes a report on a page.The problem is, that the report ID is hard coded. If I import this page to a different application, the report won't be refreshed anymore.
I have a Classic Report with Link item and Copy item and the other columns from the table. Copy item should appear in each record like the edit item link. When copy item is clicked the current row should be copied and a new duplicate row should be visible in the report.
The PL/SQL process written for this Copy item works fine (when executed alone).... but when Copy item is clicked, the PL/SQL process is not getting triggered. PL/SQL process in not conditional.
