i want to update a table passing the parameters and the updating the table according to it
i trired this
create or replace procedure move
(z1 in game.item_id%type,g1 in game.item%type)
as
begin
update game
set
postion= 'l'
where item_id=z1 or item_id=g1;
end move;
/
I want to create table from query with passing parameters
create table as temp
select * from emp
where hiredate between :sdate and :edate
and deptno = :dpt
when I tried in Toad after passing parameters it gives me error
ORA-01036: illegal variable name/number
declare
type ref_cur is ref cursor;
r ref_cur;
enam emp%rowtype;
dno dept.deptno%type;
begin
dbms_output.put_line('The Employee details are');
open r for select deptno from dept;
loop
fetch r into dno;
[code]....
Error at line 1
ORA-06550: line 12, column 28:
PLS-00103: Encountered the symbol "FOR" when expecting one of the following:
. ( % ;
if i need to use ref cursor to send parameters, is it possible? if yes how to use it?
i want to pass parameters from xyz form to abc form when i press a button. how to pass parameters.....
View 5 Replies View RelatedI need to pass two parameters (STUD_ID) and (TERM) from Form A to Form B. I've read a lot but I'm not familiar with terms and oracle jargon yet! So I really need your straight forward clarification
From the Calling form I'm using when_button_pressed trigger...what shall i write in here?! In the Called form, I'm declaring the following under (When_new_form-instance):
declare
p1_id paramlist;
stud_id number(8);
term number(5);
begin
p1_id := get_parameter_list(stud_id);
p1_id := get_parameter_list(term);
:TEST_STUD_CRSE_REG.stud_id :=:parameter.stud_id;
:TEST_STUD_CRSE_REG.term :=:parameter.term;
next_block;
end;
-----------------
on the calling form:when_button_pressed I am using:
DECLARE
p1_id paramlist;
stud_id number(8);
term number(5);
BEGIN
call_FORM('test16SEP',NO_HIDE);
GO_BLOCK('TEST_STUD_CRSE_REG');
set_block_property('TEST_STUD_CRSE_REG',default_where,'STUD_ID=:TEST_STUDENT_INFO.STUD_ID');
execute_query;
END;
How can we pass multiple parameters to cursors?
Ex: Cursor C_employees(C_empid number, C_cityname varchar2) is select emp_name, office_name from employee where employees where empid = c_empid and city = c_city_name;
I know we can pass one parameter to the cursor but I do not know how to pass multiple parameters.
,I have a queryIn my query iam passing parameters using IN clause.The parameters contains in two tablesfor ex..select a.deptno, b.deptnofrom dept1 a, dept2 bwhere a.deptno = b.deptnoand NVL (a.deptno, b.deptno) in (10, 20, 30,.....) is this correct way to use NVL like this.i have a deptno consists in both the tables. How can i use this condition.
View 4 Replies View RelatedIs it possible to pass parameters from menu file to form when calling a form from menu item?
View 4 Replies View Relatedi try this url: [URL]
with this key in my cgicmd.dat :
url_config: server=ed_url2 report=%1 userid=user/passxd@base destype=file desformat=pdf
and i have this error:
Unable to open file 'my_parameter='.
The rwservlet converts the value of my parameter to 'my_parameter='. It adds a '=' systematically at the end of my parameter.
I have a Pro*C program, which uses a dynamic query. The dynamic query is opened using result of another static cursor( 5 fields say , :a, :b , :c, :c, :d).
I am modifying the dynamic query and adding UNION for some requirement , which makes this dynamic query exactly double in size. ( means 2 set of prev. queries are joined by UNION, with one extra condition though).
The question is , Do I need to pass 2 set of variable to open the dynamic query now?
Like earlier , program was passed with (:a, :b , :c, :c, :d)
so now i should pass (:a, :b , :c, :c, :d , :a, :b , :c, :c, :d)?
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I have a form which has few textboxes, and few dropdown, and 3 links. Data is entered in few boxes, and then when a link is clicked, it goes to another page, but i want to pass the text in the text boxes, and the selected value from the dropdown also, to be passed as parameters to this link... But since these values are not yet saved, its not getting passed.. like it is something like this in the address bar add_new_event?&event_ id= &event_ name= & event_dt=
1. I m building a form in which students will file some data (name, address, etc) but i want to send a parameter on the URL i send them (their student ID number), which will be saved together with the data the end-users save.
e.g the form i m building is [URL]
can i add in the end of the URL the student_id of the end of the URL?
so it will be something like [URL]
So when student #10 will hit the URL on his browser, once he inputs hsi data and press SAVE button, on the database i can save STUDENT_ID=10 and the rest info he just entered?
2. Which is the login URL for end users? i have only the workspace login now..
I am trying to execute a STORE PROCEDURE from SQL*PLUS with no success:
SQL> execute PACKAGE.PROC(201011,'144792');
BEGIN PACKAGE.PROC(201011,'144792'); END;
*
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to
'PROC'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
In fact, when i do: desc PACKAGENAME . I see that the procedure is waiting for 3 parameters and one of them is a REF CURSOR type:
SQL> desc PACKAGENAME
PROCEDURE PROCEDURENAME
Argument Name Type In/Out Default?
------------------------------ ----------------------- ------ --------
PWEEK NUMBER IN
PCLIENT VARCHAR2 IN
CRESULTS REF CURSOR IN/OUT
After searching a bit, i try the following:
SQL> execute PACKAGE.NAME(201011,'144792','CRESULTS
'=>:C1);
SP2-0552: Bind variable "C1" not declared.
SQL>
This is a preview of the PACKAGE header:
CREATE OR REPLACE PACKAGE PACKAGENAME
AUTHID CURRENT_USER
AS
--
TYPE CurTyp_Supp IS REF CURSOR;
--
TYPE TabTyp_Supp IS TABLE OF VARCHAR2 (10 BYTE);
--
TYPE ObjTyp_Prmt IS OBJECT (p_schemaname VARCHAR, p_filename VARCHAR);
--
PROCEDURE PROC(pWEEK NUMBER,
pCLIENT VARCHAR,
cResults IN OUT CurTyp_Supp);
This what the PACKAGE BODY looks like:
CREATE OR REPLACE PACKAGE BODY PACKAGENAME
IS
PROCEDURE PROC (pWEEK NUMBER,
pCLIENT VARCHAR,
cResults IN OUT CurTyp_Supp)
QUESTION:
HOW DO I MANAGE TO EXECUTE THIS PROCEDURE FROM SQL*PLUS
I have to check some parameter values for an OID tuning I do not have sys access, I have only schema user access
Now how do I see the values of SGA_TARGET, db_cache_size etc parameter
I manage to see these var in init.ora file under /dbs folder but there are 2-3 spfile also having containing these attributes, not sure which reflect the actual.
Also can I alter also these value via schema user or do I need SYS access?
I need to use funtion optional parameters to construct an update statement in the funtion body. I have two scenarios, either both parameters are not null or the 2nd is null. Do I have to use
IF
(param2 is null)
THEN
udpate using param1 only
ELSE
update using both param1 and param2
END IF;
or is there a shortcut to do this?
when setting up data guard, if the primary clustered database is already in archive log mode, is there a need to restart both cluster instances when we update the spfile parameters for data guard ? or we can simply add the data guard parameters to the spfile while both cluster instances are online ?
View 4 Replies View Related I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
I have table test1(id,name) and table test2(id,,name)
Now when I update name column of a row on test1 I want the same value to be updated for the same id in test2.
So I wrote this trigger but its not working
create trigger test_trigger after update on test1 for each row
begin
update test2 set name=new.name where test2.id=id
end
/
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
I have a column "empno" in EMP table and "deptno" in DEPT table . I want to update both the columns with single UPDATE statement. With out a creation of stored procedure or view(updating it through view).
View 4 Replies View RelatedI'm on 11.2 DB and need to create an audit table that will be populated by DB triggers of other tables (after Insert,Update and Delete). The triggers will only ever be inserting data into the audit table. I have read that for insert only tables, you should define the 'pctfree' as 0. Is this correct? Do I need to set any other params (like pct_used) for tables only ever being inserted into?
View 2 Replies View RelatedThis procedure is not working properly.
create or replace procedure bank_search_sp
(
p_tablename in varchar2,
p_searchname in varchar2,
p_bankcode out varchar2,
p_bankname out varchar2,
p_dist_code out number
)
as
v_tem varchar2(5000);
begin
v_tem :='select bankcode,bankname,dist_code from ' || UPPER (p_tablename) || '
where bankname like '''|| p_searchname||'';
execute immediate v_tem into p_bankcode,p_bankname,p_dist_code using p_searchname ;
commit;
end bank_search_sp;
the Procedure is getting created but i dont know what actually happens when it was executed ,This is the error shown..ORA-01756: quoted string not properly terminated
ORA-06512: at "PENSIONS.BANK_SEARCH_SP", line 14
ORA-06512: at line 1
I have to write a trigger on a table which contain lot of parameters.But i need to pick a specific row and check that without disturbing other stuffs.Is there a way to write Before update trigger on a particular rows filtering the unneccasary rows.
The requirement is when user update the date from front end (Java application) the trigger should check the date and validate that it should be month end date. For example.
1)04/21/2012 wrong date
2)04/30/2012 correct date
3)03/29/2012 Wrong date
4)03/31/2012 correct date
I am trying to create a procedure that inserts parameters into a table and then returns the number of rows inserted back to calling block. the procedure is compiling fine but is not returning the number of rows inserted. My code is as follows;
HOST VARIABLE DECLARATION
VARIABLE g_CarMasterInsertCount NUMBER;
STORED PROCEDURE
CREATE OR REPLACE PROCEDURE CarMasterInsert_sp (
registration IN VARCHAR2,
model_name IN VARCHAR2,
car_group_name IN VARCHAR2,
date_bought IN DATE,
cost IN NUMBER,
miles_to_date IN NUMBER,
miles_last_service IN NUMBER,
status IN CHAR,
rowsInserted OUT NUMBER)
[code]....
I think im close just that my syntax is off.
I have a problem here.Normally, we use &p_where inside a sql script in condition sectione.g :
select name from member where name like 'a%' &p_where order by name;
may i use this kind of parameter in table section?e.g :
select name from &p_table where name like 'a%' and status = 'a' order by name;
the reason i need to do is there are 2 different server. but i need retrieve same info.server ABC have table A but don't have table B and server DEF have table B but don't have table A.
Is there any other method to solve this problem?
I have created the below types and oracle objects.
create or replace type T_SETDEL_RESP_REC as object
(
respCode number,
respDesc varchar2(255)
)
--
create or replace type T_EMA_NP_RANGE_LNPTICKET_REC as object
(
ticket number
)
create or replace type T_RANGE_TICKET_TAB AS TABLE OF T_RANGE_TICKET_REC
The following type is created in the Package specification
type t_resp_rec IS RECORD
(
resp_code number,
resp_desc varchar2(255)
);
I have the following two procedures
Procedure getResponse(p_call_request_id IN number, p_resp_rec IN t_setdel_resp_rec,
p_range_ticket_tab IN t_range_icket_tab, p_endof_event IN varchar)
PROCEDURE ProcessResponse(p_call_request_id IN number, p_resp_rec IN t_resp_rec,
p_ticket_tab IN t_ticket_tab, p_endof_event IN varchar2)
The get Response procedure is a wrapper procedure exposed to Java to pass values. The Process Response procedure is a main procedure where all logics and business rules are handled.
The Problem is:
How can I pass the values from get Response procedure to Process Response procedure. So that rules and validations are applied. Please note the p_ticket_tab may have many ticket numbers corresponding to p_call_request_id.
Values E.g. :
p_call_request_id = 1
p_resp_rec (1234, 'Error found')
p_range_ticket_tab (1,2,3,4,5)
p_endof_event = 'Y'
creating an sql script that can update info from one table in dbase1 to another table in dbase2 that has the same columns and if possible insert date and time in one column when the synchronized is done?
View 3 Replies View RelatedMy scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:
Query 1
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
Query 2
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
where exists
A.code = (select B.code
from TableB B
where A.code=B.code)
When i execute these two above queries, it keeps executing indefinitely.
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
