I am unable to access remote (hosted on remote server) database using rman.
When I try to connect using "rman TARGET sys/syspwd@db" I am getting:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12520: TNS:listener could not find available handler for requested type of server
I the same time I am able to login using sqlplus (sqlplus sys/syspwd@db as sysdba) without any issue.
I have installed oracle 11g and configured Apex application on it. I am able to open the Admin window from my machine . URL.... and everything works fine. But when I try to open the link from other machine I get "Server not found" error.
I read the posts it says to enable Http for other servers . I dont find the way to do it .
I have a form developed using Oracle 10g Forms Builder. It is deployed on server. I need to track who is remotely accessing the desktop and running this form. How can we track this. Are there any webutil commands to trace the application used to access the desktop? What is the work around for this?
We have created a new db link. But we are not able access the remote database. When we are trying to access any table using db link system is getting hanged.
We would like to know what are the parameters/permissions which affect the db link access either at data base level or at server level.
One observation we made is that that particular db link is not getting dropped when we tried to drop it.
am trying to backup my oracle database using RMAN to a remote machine. both systems are using redhat linux. i have successfully configured NFS on my remote machine and mounted it from my oracle database machine.
i then configure rman channel to disk on mounted linux directory..when i take full backup of database i receive this error
ORA-19504: failed to create file "/mnt/ora_df766174940_s104_s1" ORA-27054: NFS file system where the file is created or resides is not mounted w ith correct options Additional information: 3
How do i mount this with correct options the error msg says OR what do i do to backup to the said directory?
on 11g R2 on Win 2008, I want to duplicate my target DB which is on a a remote server using RMAN backups. The destination is on local server. I will run RMAN on local server.
In initnewdb.ora, I should add :
# Convert file names to allow for different directory structure if necessary. #DB_FILE_NAME_CONVERT=(/u01/app/oracle/oradata/DB11G/,/u01/app/oracle/oradata/NEWSID/) #LOG_FILE_NAME_CONVERT=(/u01/app/oracle/oradata/DB11G/,/u02/app/oracle/oradata/NEWSID/)
my questions :
1-In my case would it be :
# Convert file names to allow for different directory structure if necessary. #DB_FILE_NAME_CONVERT=(\remoteserver:/u01/app/oracle/oradata/DB11G/,/u01/app/oracle/oradata/NEWSID/) #LOG_FILE_NAME_CONVERT=(\remoteserver:/u01/app/oracle/oradata/DB11G/,/u02/app/oracle/oradata/NEWSID/)
2- should we keep the convert parameters in init.ora file after duplication for always ?
I have oracle 11.2.0.3.0 in Windows 2008 server R2 64 bit version. I have installed database ASMDB with ASM ... Now i have another one machine , I want to clone my database in that machine with Non ASM file system .. Can any one tell me step by step document to do it ?
Can i keep the database name as ASMDB in another Machine ?
When I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production APEX: 4.0.2.00.07 Web-Server: EPG SELECT * FROM NLS_DATABASE_PARAMETERS;
I am having oracle database version 11.2.0.3.0 standard edition, where one of my users requirement is that he wanted to send mails from oracle database but he is getting below error
ORA-24247: network access denied by access control list (ACL) ORA-06512: at "SYS.UTL_TCP", line 17 ORA-06512: at "SYS.UTL_TCP", line 267 ORA-06512: at "SYS.UTL_SMTP", line 161 ORA-06512: at "SYS.UTL_SMTP", line 197 ORA-06512: at "HF_REPORTING.SEND_MAIL", line 12 ORA-06512: at line 18
is it possible to send mails from oracle database in STANDARD Edition?
While Running the proc,it's raising the below error.
Error report:
ORA-24247: network access denied by access control list (ACL) ORA-06512: at "SYS.UTL_TCP", line 17 ORA-06512: at "SYS.UTL_TCP", line 246 ORA-06512: at "SYS.UTL_SMTP", line 115 ORA-06512: at "SYS.UTL_SMTP", line 138 ORA-06512: at "LISTER_SHIFT.SOLN_GENERIC_SENDMAIL", line 33 ORA-06512: at line 1
Let's consider such table that all rows fit into single block:
SQL> create table test as select rownum id, '$'||rownum name from dual connect by level <= 530; Table created. SQL> create index i_test on test(id); Index created. SQL> SQL> begin
[code].....
why does approach with full scan take longer even if table occupies only one data block? PS. 11gR2
rman is used to duplicate database A to database B on another host
the duplicate process worked fine before we started testing encryption
the duplicate process worked fine with database A having an encrypted column in one table in a non-encrypted tablespace
Now, database A has an encrypted tablespace with nothing currently in it. The duplicate process now ultimately fails with ORA-19913, unable to decrypt backup.
I am not using encrypted backups, not specifying encrypt or decrypt anywhere in the duplication process. The only thing that is encrypted is the one tablespace in database A. I have the same wallet files on Host A (database A) and Host B (database B). Wallets are open. So why does the duplication process fail because the backup cannot be decrypted?
I want to update my table base on changes in a column of a table from remote database automatically. I just want to pick some updated column then update to my own. i have made a trigger but failed.
CREATE OR REPLACE TRIGGER TG_UPD_ID after update OF STUD_ID on STUDENT@SCHOOLDB for each row begin
update MARKS set ID_ST = :new.STUD_ID where STUDID_STUDENT = :old.IDS;
end;
Error report: ORA-02021: DDL operations are not allowed on a remote database 02021. 00000 - "DDL operations are not allowed on a remote database" *Cause: An attempt was made to use a DDL operation on a remote database.
For example, "CREATE TABLE tablename@remotedbname ...".
*Action: To alter the remote database structure, you must connect to the remote database with the appropriate privileges.
We have eight servers. One of them is for centeral management. The other seven is for development and test databases. Every night, we start a process which exports database schemas (without data) into the centeral server. An example of the process we run is just like below:
As you can see, we use @dev to connect remote database. But dump file is created in local (centeral) server. We are planning to use datapump instead of classic export in future. But I couldn't find a solution, that could take a database export in a remote server and create dump file in local. I have looked at NETWORK_LINK parameter; but it doesn't seem to work for our case.
Is it possible to backup a remote database with datapump and make it create dumpfile in local? (Of course we can use some solutions such as NFS, but we really not prefer this; if datapump has ability to remotly backup.)
We have access to a remote Oracle database in Germany and need to insert selected data to our local Oracle database. Our problem is that we have to do several joins (7 tables) on the remote database as well as using one where clause (always the same: P.T_LIEF_LFNT_1='12803193').
Unfortunately we do not have rights to create a view on the remote database. Is there another way to send the entire query to the remote database for processing? Also, the query returns approximately 34,000 rows.
Here is our current query:
INSERT INTO PRIMUS(PARTNO, SORT_FORMAT, TP_WORKSPACE,
I working on data transferring from one database server to another database server. but at starting i want to check weather remote database is connected or not?
for e.g.
a := get_remote_connection; --- Calling function for check remote connection return boolean if a then <call my data_transfer_proc> else exit; end if; reply.
I have created a remote link to a sql server db in oracle 11.0.7 works fine in sql plus. I can select tables by select * from table@linkname...the link is a public link But when I put it in the procedure it says invalid table name. then I created a public synonym for the table - i can select from the synonym in sql plus - but in the procedure it says synonym translation invalid...Also I cant grant any privileges to the synonym as it says ddl operations are not allowed on remote objects
I have 2 database . One is production and other is Integration and I have one table "emp" which is on integration server and a synonym of that table with the same name"emp" on production. On production we have a proc in which we are using "emp", but some time our integration server goes down, so is there any way to ping the integration server inside the proc and if it returns success then we will execute the rest of code of proc , otherwise it will send a mail to us saying that integration server is down.
We are running Oracle 11.2.x DB on Solaris platform. Looking for a way to see if I can send alert log and listener log to a remote syslog server? I know there are some other methods like Epilog and some other scripts that could be used, but wondering if there is a "built-in" method to accomplish this?
I have a simple script which fetch data from another SQL server database.
The remote SQL Server database is accessed by oracle thru gateway, and a simple DB link is made in local database to the remote oracle datbase (which actually access the MS SQL Server)
The SQL script empties all the data in local database, and fills it with the fresh data from MS SQL server.
Problem is sometimes SQL Server is down, and i lose all the data in local database. The script runs automatically as schedualed job. I want to make my script intelligent enough to terminate the script if the other database is down.
My Oracle DB 10g R2 running on AIX 5.3 OS. When I am shutting down the oracle I see that it is waiting for complete the active calls and I determined that these active calls/processes are from remote machines.
When I try to run this ps -ef as shown below, it shown me number of oracle process with LOCAL=NO
When I try to remotely connect to an Oracle schema using SQLplus, I consistantly get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Yet I can connect to the same machine, from my own machine just fine using SQLDeveloper.Here are the details I have collected so far
- I am using the instantclient for OS X - export DYLD_LIBRARY_PATH=/Users/jeff/instantclient - export ORACLE_HOME=/Users/jeff/instantclient - export TNS_ADMIN=/Users/jeff/instantclient/tns
The command line i ran : ./sqlplus seam_classoft/seam_classoft@//oracle11gtest.terida.net:1521/orcl
Its behind a VPN, so I'm not worried about posting my info.
My /Users/jeff/instantclient/tns/tnsnames.ora that I copied directly from the server looks like this:
I've tried changing SERVICE_NAME to SID = orcl, no change inbehavior. My original guess was that the database wasn't registered with the listener, but that would mean sqlDeveloper should fail as well, but it works.Here is out put of lsnctrl status:
LSNRCTL> status Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production Start Date 07-JUN-2010 09:16:40 Uptime 42 days 0 hr. 58 min. 59 sec Trace Level off [code]....
I installed oracle 10g and developed simple software using forms 6i. Its working well as a stand alone system.
I want to share it in network. so I installed forms 6i as oracle client , copied the tnsnames.ora from the oracle installation path to forms installation path.(inside NET80/Admin folder)
When i try to connect with user name and password , it comes ORA-12203 Unable to connect to destination. I checked LSNRCTL in the database machine, it is listening.
