we are planing to put the same oracle environment on two machines.
what is the best way to realize that.installation on each machine or installation on one machine and copy the environment to the second?
The Oracle machine A (11R1) is placed in San Jose.
The Oracle machine B (10R2) is placed in Sydney.
I need to develop a daily replica from A to B. I don't need the entire db, but only some single schema.
The entire DB size is 1TB.The exp pump gzipped dump size will be 5+GB.Tnsping from A to B takes 500+ ms.The regular A exp pump -> ftp -> B imp pump will be too slowly because of the poor network.Which way it would be the best to implement it?
Machine 1: Oracle server installed and database hosted on this Machine.
Machine 2: Oracle client is installed and connect through sqlplus to database in machine 1.
The requirement is: I need to have a Java/C program in machine 2 (where client available) which needs to be called from the stored procedure in server on machine 1. The objective is calling a java/C program from Oracle stored procedure but available on 2 different machines. Is it possible,
Environment: Oracle 11.2.0.1
UNIX AIX 6.1
Our product uses Oracle11gR1 and in new release we are going to use Oracle11gR2. For this we are performing following steps:
(1) Install Oracle11gR2 on a machine where our product (Oracle11gR1) is already installed.
(2)Upgrade Oracle11gR1 schema to Oracle11gR2.
(3)For using upgraded schema in our product installer we create clone of upgraded schema.
(4)For creating clone we are using Oracle11gR2 DBCA utility.
(5) Clone files are successfully created (DBC, CTL, DBF).
Now we performed same steps from another machine and DBF file size changed very much. On one machine it was 89 MB and on second machine it was 150 MB. There is no different in schema and both machines are Windows 7 machines.
Tor educe size of schema we tried different space reclamation commands but size is not changing.
I need to install Oracle Data Provider for NET (and all depending Oracle client SW components) in multiple client machines.
Exist any other options (faster) without installing oracle client on each of the machines?
I'm trying to move my backup sets from windows database environment, to OEL 5.7 environment on another server.
I've found a manual [URL] by which I am trying to do it.I took backup sets from last night's backup using RMAN,and the current parameter(initSID.ora) file from the running live database.Now i need to configure control files in the pfile accordingly.
1. can i take current control files from the running system, to restore and recover backup sets from last night, to the state the database was at backup time?
2. how can i find out if control files are backed up and know by RMAN? "list backup completed after '2012-JUN-19';" >> gives me Archive redo logs, datafiles, but don't see the control files(or don't reconize them).
link where can i get oracle 9i for Linux OS??Is 9i available for 64 bit ?
View 4 Replies View RelatedMy Oracle DB 10g R2 running on AIX 5.3 OS. When I am shutting down the oracle I see that it is waiting for complete the active calls and I determined that these active calls/processes are from remote machines.
When I try to run this ps -ef as shown below, it shown me number of oracle process with LOCAL=NO
/home/oracle> ps -ef | grep 91334
oracle 85210 87320 0 12:47:56 pts/35 0:00 grep 91334
oracle 91334 1 0 12:45:11 - 0:00 oracleIDB (LOCAL=NO)
What are the possible scenarios for this LOCAL=NO? How do I find that this process is from which machine or IP address?
recently i have tried to upgrrade from oracle 11.2.0.2 to 11.2.0.3 in a test environment (virtual machine).
there i have mentioned the SID as ORCL, but when we took the same snapshot to other machine (VM). iam unable to connect to the VM, unless i gave the local net service configuration as ORCL but it is unable to connect. but when i ran the query "select * from GLOBAL_NAME" output was ORCL. domain. com again i have configured in LNSC as ORCL.DOMAIN.COM it is working.
but i have given the sid as ORCL..
I have a requirement to upgrade Oracle Data Integrator(ODI) from 10.1.3.5 to 11.1.1.6.3 We have a Clustered production environment where N1 will be up when N2 be down and viceversa.
Here N1 and N2 are the ODI servers as well as DB(11g Release 2) servers. They both access the SHARED CLUSTERED database. From ODI we will generally point the Oracle clustered IP(Virtual IP) which will internally point either N1 or N2 whichever is active. ODI application wise we are clear about the procedure.
Having some issues on DB related activities.
1. Should I break the cluster definitely? Cant I do the activity without breaking the cluster?
2. Do I need to point N1, N2, Clustered IP (Virtual IP) while doing the activities?
3. Since its a clustered database, do I need to db related activities once or twice? (Twice means, manually on both the servers)
4. As they are using same file structures (RAC), If the Virtual IP points N1 by default, assume that I create two new users a
Some of my forms taking to much time while loading on some machines but same forms working fine on other machines with same configuration.
Forms, version: 10.1.2.0.2, Clients: Win_XP_Pro, App Server: Window 2003 Server, IE7, Jinit 1.3.1.26
I have a scenario In which I have say 4 AQ in which I will post the message.Also i have say 2 database.I am planning to create an MDB which will poll on these AQ's, so whenever I post message the MDB will read it and perform a specific action.I believe I can create only one MDB per queue, if it is so then I have to create 8 MDB.
As there 2 datasource and 4 MDB. Is there any other way to handle this I mean without creating 8 MDB as the Data sources can increase to 10 to 20 so the number of MDB will be 20 to 40.I guess this will affect the application performance. Can I make some changes in application so that only few MDB's are required?
Database is up and running and client machines able to do TNSPING; But when users try to connect the database thro SQL DEVELOPER, they are getting below information:
your database connection has been reset. Any pending transactions or session state has been lost.in the database server, SQLNET.ORA reads as below:
> more sqlnet.ora
AUTOMATIC_IPC = ON
names.directory_path = (TNSNAMES,EZCONNECT)
names.default_domain = world
name.default_zone = world
sqlnet.expire_time = 15sqlnet expire time shows 15 min.
normally this error willbe suppressed if user tried after some time. But now we get this error for more than 2 hrs.
How can we bring down the databases in oracle fail safe environment?
We have one database X in two server�s windows A & B with oracle fail safe environment.
What procedure should we fallow to bring down the database X.
Today I was strangling to bring down the database because database was automatically coming up once brought down the database. what procedure should we follow to bring down the database in OFS environment.
i am reinstalling oracel 11g in my window 7 64 bit machine after i uninstalled it. however, i got an issue that is environment variable path failed in the installation process. this didn't happen when i firstly successfully installed oracle.
View 7 Replies View RelatedI am running a job that is using Pro C code. I am running it on an Oracle 10g database with an Oracle 9 client on a UNIX platform. The code compiled fine. The job runs fine sometimes but other times it fails with a Segmentation Fault error.
I have the same job running in an Oracle 8i environment with no problems.
how to change non - SYS oracle users' password in data guard envirnment. We all know that for SYS password change in data guard. DBA has to change in primary database by either "alter user SYS identified by xxxx" or create password file with orapwd.
Then scp password file to standby database. However, if I want to change SYSTEM or DBSNMP passwords, I change on primary with " alter user ....." SQL, then new passwords will be login dictionary. But this new SYSTEM pqssword will be shipped with redo log to standby and SYSTEM password on standby will be updated? I need technical answer on this question
We are in the process of setting up a DR environment for our SAP and Oracle databases . The netapp and our architects came up with solution as follows .
1.Standby databases are built for all production databases.
2.The SAP file systems are replicated to the secondary site
3.The Oracle logfiles and controlfiles are replicated by netapp snap mirror every 10 mins interval
4.The database is recovered through recover standby database every 15 mins at standby site
5.Please note there is no data guard involved .
6.To test the failover , the mirror is broken .The standby controlfile is replaced with Production controlfile and Redo logs files.
7.The standby database issued a startup comnmand and it worked .
Would like to know whether the step 6 is a correct approach ? I tried to convince the architects that this will result in a very disastrous situation for us but none is listened to .
how to integrate Application Express with Oracle EBS. Any companies that offer hosted EBS environment with APEX and allow developer-level access (ie database, application server, front-end responsibilities)?
View 1 Replies View Relatedour DB machines time is one hour ahead of Active Directory, as we sync our time with AD, is there any contribution of Database in the wrong time of solaris machines ? and for the resolution of problem, what can be checked at DB side.
View 1 Replies View RelatedHow to overcome the prompt user id & password to connect oracle DB from Unix environment.
View 2 Replies View RelatedI've just patched a development oracle environment (RAC 11GR2) with temporary patch 8730312. I would like to do same thing on Production RAC. Is it necessary to test all applications on dev environment with this kind of patch before deploy it on Production ?
View 2 Replies View RelatedTo clear some confusions regarding 11gR2 RAC environment.
(1) Can I use the same owner (ie oracle) for both the Oracle Grid Infrastructure installation and the Oracle RAC installation ? Like :
ORACLE_BASE=/oracle/11.2
GRID_HOME=/oracle/11.2/grid ## Grid Infrastructure binary
ORACLE_HOME=/oracle/11.2/db ## Oracle RAC binary
(2) Whats the difference between CSR_HOME and GRID_HOME ??
(3) If not using ASM in RAC environment, should I still need to create "storage administration role" (i.e. SYSASM/OSASM..) ?
(4) Is password file necessary for RAC instances in each node ?
how to set environment variable in oracle application.
View 1 Replies View RelatedI faced a problem in our production primary DB like the listener was running but it was not connecting through the remote system, when i accessed the primary database.
But when i restarted the listener it started connecting. I want to know the reason for this crash/freeze.
Oracle version: Oracle Database 11g release 11.2.0.1.0 SE1 64 - bit production
We have a 10g environment with DataGuard running for reporting purposes. Our application team is getting ready to upgrade their application and it requires that several SQL Scripts be run to perform the primary database updates. A couple of them are over 1 MB in length. My concern is that these scripts will break DataGuard. I am not a DBA by any stretch, but I seem to remember there are certain limitations with DataGuard.
I have reached back to the team and asked them to have the Vendor confirm these scripts are validated for a DataGuard environment and I have also reached out to the System DBAs for review. I am wondering if there is an utiility available that can check the SQL to confirm if there are any DDL or DML statements that will not work in DataGuard. Likewise, we are going to run these scripts in a non-production DataGuard enabled environment first, but I want to have some level of confidence, that this will be a success.
We have an application, where we invoke a URL pointing to a folder on the Application Server, so that users can download files from the same.
There is user authentication provided for the URL.
Example :
Our application ABC (example) which is built with Oracle Forms 10g, hosted on Application server (itxxx123) inovkes a module GEN9999 which on pressing a button calls a URL which is open in the Internet Explorer browser.
If the URL has been called from the Forms or the Application (ABC), then it should be allowed.
If the URL is called standalone, by Opening IE Browser and invoking the URL, this should not be allowed.
However, there have been security concerns raised during Audit, saying that users can access the URL directly from the Browser instead of the Application. Also the URL is saved the Browser history, so even if the user is no longer working in the Application Team, and has moved out of the team, then the ex-user can still access the URL and view and download files.
Is there any way to restrict access to the URL such that is only accessible when it is called from the Application, and that access is restricted when directly called from the Browser.
I have seen that environment variables in httpd.conf may be usable for the above. However, not sure how to use them from Oracle Forms.
Questions about implementing ARCHIVELOG mode in RAC environment.
Oracle 11gR1 RAC + ASM database. I'd like to implement ARCHIVELOG mode. Each node will have its own archive log.
Does it make sense to place archivelogs on ASM (shared storage)? Or the best practice would be to have some aside "BACKUP" server to place and keep archivelogs from all the RAC nodes there?
Additional question is about archive logs space required estimation. If it's correct to know estimate archive logs space required to get the daily avg number of switch logs
CODEselect round(avg(n_of_switch_logs), 3) avg_num_of_switch_logs
from (select trunc(first_time), count(*) n_of_switch_logs
from gv$log_history
group by trunc(first_time))
and multiply it on size of single redolog?
what value exactly I need to give for the PATH environment variable in oracle 11g running on windows xp?
View 15 Replies View RelatedI am calling a select query inside a procedure but i need to set environment variable 'set linesize 200' inside that procedure but i am not able to create the procedure due to some error. I am attaching the procedure query here with:
before the select query i need to insert this environment variable : "set linesize 200"
create or replace
procedure TABLESPACE_USAGE
is
l_mailhost VARCHAR2(64) := 'ip address';
l_from VARCHAR2(64) := 'email id';
l_subject VARCHAR2(64) := 'TABLESPACE_USAGE1';
l_to VARCHAR2(128) := 'email id';
[code]......