I've just patched a development oracle environment (RAC 11GR2) with temporary patch 8730312. I would like to do same thing on Production RAC. Is it necessary to test all applications on dev environment with this kind of patch before deploy it on Production ?
View 2 Replies
I'm having a 2node 11.2.0.3 RAC setup with ASM on Solaris 10 x64 platform.During the restart of the database, it is taking longtime to start around 10mins.
View 3 Replies View RelatedI have a deadlock trace file to analyse and i used to be able to see the rowid as a 16 bit hex value in the trace file, which i could then query on to get the actual real world row name.I see in the 11GR2 deadlock trace the formatting is different and for the life of me i am unable to see the rowid. Has Oracle stopped reporting this now, or is their another way to get this value? The deadlock graph shows me
*** 2013-05-14 14:49:15.047
Submitting asynchronized dump request [28]
Global blockers dump end:-----------------------------------
Global Wait-For-Graph(WFG) at ddTS[0.16e] :
BLOCKED 0x4362890f8 5 wq 2 cvtops x1 TX 0x3d001b.0x18a3021 [FF000-0001-00000002] inst 1
BLOCKER 0x436288f38 5 wq 1 cvtops x28 TX 0x3d001b.0x18a3021 [102000-0001-00000002] inst 1
[code]....
I am trying to apply 11.2.0.2.5 psu on a 2-node cluster running on RHEL 5.5 vms. Followed ORACLE-BASE examples when installed this laptop RAC. I am not using any ACFS and none of GI and DB homes are shared. But, on node 2, cluvfy THINKS database home is shared.
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac1 trace]$ hostname
rac1
[oracle@rac1 trace]$ echo $ORACLE_HOSTNAME
rac1
[oracle@rac1 trace]$
##################################################################################
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle/product/11.2.0.2/db_1 -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle/product/11.2.0.2/db_1" is shared
Shared storage check was successful on nodes "rac2,rac1"
Verification of shared storage accessibility was successful.
NODE_STATUS::rac2:SUCC
NODE_STATUS::rac1:SUCC
OVERALL_STATUS::SUCC
[oracle@rac2 trace]$ /oracle_grid/product/11.2.0.2/bin/cluvfy comp ssa -t software -s /oracle_grid/product/11.2.0.2/ -n rac1,rac2 -display_status
Verifying shared storage accessibility
Checking shared storage accessibility...
"/oracle_grid/product/11.2.0.2/" is not shared
Shared storage check failed on nodes "rac2,rac1"
Verification of shared storage accessibility was unsuccessful on all the specified nodes.
NODE_STATUS::rac2:VFAIL
NODE_STATUS::rac1:VFAIL
OVERALL_STATUS::VFAIL
[oracle@rac2 trace]$ hostname
rac2
[oracle@rac2 trace]$ echo $ORACLE_HOSTNAME
rac2
[oracle@rac2 trace]$
I can not determine any reasons and do not know how to fix.
I have recently setup a 2 node Rac on oracle linux 5.4 with oracel 11gR2, the installation went smoothly and all the cluster resources are up and running however the data is not syncing across the nodes, when I create a table it shows up on the other node but when I insert rows into the tables they don't show up on the other node and when I restart the cluster the inserted rows are completely gone even from the node where I inserted them.
View 4 Replies View Relatedoracle 11g ASM RAC under OEL 5.6 . i just want to do a cloning so first i create cloning of my oracle home and then i create pfile and i get this error
SQL> startup nomount;
ORA-29702: error occurred in Cluster Group Service operation
SQL> exiti google it , i found this issue is with relink RAC binaries due to the souce database is RAC and destination is not
[oracle@backuptest ~]$ cd $ORACLE_HOME/rdbms/lib
[oracle@backuptest lib]$ make -f ins_rdbms.mk rac_off
bash: make: command not found
oracle 11g.2 rac with asm RHEL 5
ora.gsd
OFFLINE OFFLINE ccbs01
OFFLINE OFFLINE ccbs02
why it's offline , what this means , what the useuage of this? did have any affect on database availability? the below it's from OEM
[Critical] ABSNL Cluster Resource State State Change
ora.gsd has instances in OFFLINE State Nov 12, 2012 12:15:03 PM
[Warning] ABSNL Cluster Resource State State Change
ora.abs.db has instances in OFFLINE State Nov 12, 2012 12:15:03 PM
1. RACcheck - RAC Configuration Audit Tool - RACcheck 2.1.6
2. In the service add command syntax using the srvctl command, there is a new option that can be used with the srvctl add service command which is [-l <primary, physical-standby, logical_standby>], this option allows the service to be able to start up only when the service role matches the database role that is saved in the OCR.
We can now add a service to a database in the OCR using the following command:
srvctl add service -d <db_unique_name>
-s <service_name>
[-l <primary, physical_standby, logical_standby>]
3. NFS options for 11.2.0.2 RMAN disk backups on Linux 64-bit
4. In RAC environment from 11.2 onwards Backup Or Snapshot controlfile needs to be in shared location
1. Check the snapshot controlfile location:
RMAN> show snapshot controlfile name;
2. Configure the snapshot controlfile to a shared disk:
RMAN> CONFIGURE SNAPSHOT CONTROLFILE NAME TO '<shared_disk>/snapcf_<DBNAME>.f';
Or in case of ASM use
RMAN> CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+<DiskGroup>/snapcf_<DBNAME>.f';
I have installed Oracle RAC 10g on Redhat Linux 4.0. Till yesterday failover was happening that is when i stopped one instance on node01 the vip of node01 was transferred to node02.This was shown using ifconfig -a but now that is now happening.
Below information is given:
[oracle@node01 ~]$ crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.hitesh.db application ONLINE ONLINE node02
ora....h1.inst application ONLINE ONLINE node01
[Code]....
[root@node01 oracle]# ps -ef | grep lmon
oracle 5741 1 0 12:07 ? 00:00:03 ora_lmon_hitesh1
root 22582 20805 0 13:01 pts/2 00:00:00 grep lmon
oracle 23643 1 0 11:58 ? 00:00:01 asm_lmon_+ASM1
which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?can any one detail difference between above 2 options?
View 4 Replies View RelatedGrid Version : 11.2
OS : Unix, Unix-like
For one of our Java applications, the Oracle Client installed in the apps server was 10.2 . One of the SCAN LISTENERs were down in the cluster. When DNS resolves the scan name to that particular SCAN IP where the listener is down, the connection will fail. But , after they upgraded the oracle client to 11.2 , the issue seems to be resolved. It seems that the client is skipping the faulty SCAN IP which doesn't have scan listener running. Are 11.2 and higher Oracle clients intelligent enough to check this ?
I am new in RAC scenario though i have some system to look after. I want to know, like single instance there is alert log,trace log where we should investigate to check if there is any problem. For RAC system which are the logs that i can find the monitor the incident or regular health checkup under grid and oracle user?
View 3 Replies View RelatedI m trying to make ORACLE RAC 10gr2 on two nodes with openfiler , with ocfs and asm.but i didn't have clusterware 10.2 software to install because oracle has removed software to download, that's why i install clusterware 11.2 . after installation clusterware 11.2 i check status and output is below on both nodes.
[oracle@linux2 bin]$ ./crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
but when i try to install oracle 10gr2 software and when i reach to configure asm disks it says "in order to use AUTOMATIC STORAGE MANAGEMENT the oracle cluster synchronization service (CSS) must be up and running. and says to run "/u01/app/oracle/product/10.2.0/db_1/bin/ localconfig reset* as root user.. I run it and it give no error.
recently i have tried to upgrrade from oracle 11.2.0.2 to 11.2.0.3 in a test environment (virtual machine).
there i have mentioned the SID as ORCL, but when we took the same snapshot to other machine (VM). iam unable to connect to the VM, unless i gave the local net service configuration as ORCL but it is unable to connect. but when i ran the query "select * from GLOBAL_NAME" output was ORCL. domain. com again i have configured in LNSC as ORCL.DOMAIN.COM it is working.
but i have given the sid as ORCL..
is there any alarm in moving alert logs generated in the grid infrastructure. The alert log in the grid log directory has grown around 2gb .Our CRS version 11.2.02. on linux. Also pls, Sample script for automating the same.
View 4 Replies View RelatedTrying to find a best practices document from Oracle regarding the use of ASM to store the archivelogs in RAC. Most of the DBA's I know create a non-ASM location to store the archivelogs. Are there any considerations if you are also using dataguard?
View 5 Replies View RelatedWe have java application which uses the ons configuration. Currently app's ons nodes parameter is pointing to vip i.e Node1-vip:6200,Node2-vip:6200. Will Ons nodes parameter support the RAC scan? Can i change to Nodes:RAC-scan:6200?
View 1 Replies View RelatedGrid Version:11.2.0.3OS : RHEL 5.8 I have succesfully installed cluster (GI) and installed RDBMS software on my 2-Node RAC . But, I don't want to use dbca to create the database due to some custom requirements. Instead , I want to run CREATE DATABASE command manually to create the RAC DB. Once the DB is created in one node, what are the steps I need to do to make this DB a RAC DB?
View 5 Replies View RelatedI have an java application deployed on websphere that is using Oracle. Datasource are created in websphere using URL like this:
jdbc:oracle:thin:@DBSERVER_NAME:1521:DB_NAME
Now, that we plan to move move to oracle rac, I learnt that we need to make change to datasource like this:
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)
(HOST=DBSERVER1_NAME)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)
(HOST=DBSERVER2_NAME)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME
=DATABASE_SERVICENAME)))
would that be enough, or I need to make other changes as well from application perspective.
Another thing is that application deployment is done through ant scripts, which at the moment copies some data on /tmp/.. folder on db server and then run db scripts. These scripts make some ddl changes and some record updates. Now with rac implementation, these scripts will be run on one of the rac node(instances), so do I need to run these ddl scripts/record updates scripts on other node in oracle rac or oracle rac would take care of this automatically.
RHEL 5.811gr2.
I have two node RAC on a test server. I have installed database software but it failed with an error that OEM could not be installed. Now I need installing Enterprise manager.
We are in preparation for the purchase of equipment for two- node Oracle10g RAC (on Windows Server 2008) and I need to configure the disks on servers. We have an existing EMC VNX5500 storage and SAN 8Gb switches.
My question is with how many disks to configure servers?Originally we planned four SSD discs (two in RAID 1 for OS and two in RAID 1 for locally Oracle home) for each node/server, and everything else on storage disks (Shared Disks Storage).
Whether it is necessary to have more local disks and for what? Where should be redologs files, archivelogs files, backup files…
Whether it is better server to be configured with six SSD disks:
- two in RAID 1 for OS,
- four in RAID 10 (or RAID 1) for locally Oracle home, archivelogs files, or something else…?
Version: 11.2.0.2/RHEL 5.4
I was under the impression that you need only one UNDO Tablespace for each instance. But , for our 2-node RAC, I can see three Undo tablespaces.
SQL> select tablespace_name,status from dba_tablespaces where CONTENTS = 'UNDO';
TABLESPACE_NAME STATUS
------------------------------ ---------
UNDOTBS1 ONLINE
UNDOTBS2 ONLINE
UNDOTBS3 ONLINE
SQL> select distinct inst_id from gv$session;
INST_ID
----------
1
2
$ olsnodes -n
thclst214 1
thclst215 2
Grid Version: 11.2.0.3 OS: Red Hat Enterprise Linux 5.6 Node2 of our two node RAC got rebooted. Upon reboot, CRS and ASM instance came up. But the DB didn't come up. How can I check if DB is linked to CRS startup ?How can I enable DB startup upon CRS startup ?
View 3 Replies View RelatedMy client asked me to "apply the newest patch" on his RAC 10.2.0.5 environment on Windows.
I've downloaded 10.2.0.5 Patch 20 (the newest version).
My question is: Should i apply it using OPatch to both: ORACLE_HOME and CRS_HOME? or only in ORACLE_HOME? What with 10.2.0.5.2 CRS Patch? Should i apply earlier CPU patches?
I have a 2 node 11.2.0.3 RAC database, OS version is RHEL 6.1
Our existing grid control server setup is 10gR2.Can i install 10.2.0.5 agent on my RAC servers and use the 10g grid to monitor my 11.2.0.3 database(RHEL 6.1) ?
What are the RAC DBA daily(routine) tasks?
View 6 Replies View RelatedUnable to start the crs in one node, totally it's four node rac and Database version - 10gR2?
View 2 Replies View RelatedI am wokring on oracle 10.2.0.4 rac 2 node instances on AIX. We have one table having multiple rows defilning jobs will be done by users ...the functionality is that ..when even one user will pick on row (job) , one update statement will issue and it will update status column to 1 which menas job is allocated , this means now this should not allocate to any other user ..
but we are facing issue that once any user will pick that job , in application log files we can see that row gets lock and updates the status to 1 . but then also users connecting to other or some time same instance will get that job...means multiple users can pick same job .. even after already picked by another user ..
Is this can be issue with rac configuration ... like whenever one user updates a row ..it will be in cache of one instance and when another user trys to again update 2nd instance does not have that information and allows user connected to that instance to pick that job..like delay in block transfer or cache fusion..
is this can be issue with rac or it is purely application issue..
I am Oracle RACSIG (URL....) member, but from last week, I am not able to play any of the recorded web seminars. I am getting error "The webpage cannot be found HTTP 404". I am able to look at the PDF but not the recording.
View 0 Replies View RelatedHow to set the password for SCAN listener in 11gr2 ?
View 9 Replies View Related
