"C:UsersKarthikeyan>sqlplus / as sysdba SQL*Plus: Release 12.1.0.1.0 Production on Sat Sep 7 17:42:37 2013 Copyright (c) 1982, 2013, Oracle. All rights reserved. ERROR:ORA-12560: TNS:protocol adapter error Enter user-name:"
this is the first time i tried to open sql*plus and i didn't create any database connection before....so i don't have any username and password.......
I try to login as SYS@sid AS SYSDBA When I login via TOAD, I am able to. However, as in (1), all my attempts to login from command-line SQL *Plus fails. The error I get is ORA-1031 Insufficient Privileges Even if I am on the physical server and try to run the SQL *Plus, I get the same error -- Insufficient Privileges
Here are the environment details:
Server: Windows Server 2008 R2
Server: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Client: Windows 7 Professional
Client: SQL*Plus: Release 11.2.0.1.0 Production
how to restrict sqlplus as sysdba
C:> Set Oracle_sid=Mydb
C:>sqlplus / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
I don't want to log in any one as sqlplus / as sysdba.If they can able to login as sqlplus / as sysdba then they can see others schema in the database.Say if i set
SQLNET.AUTHENTICATION_SERVICES=none
no one can log in as sysdba were as later some one changes to
SQLNET.AUTHENTICATION_SERVICES=NTS
After they changes to NTS they can log in and access other user details right ? how to restrict
Oracle version: Oracle 11 g
OS Version :Win 7
I am in a bit confusion about the user when we are logging in to sqlplus /as sysdba. what the user is when we are into sqlplus with sqlplus /as sysdba.
View 3 Replies View RelatedI used the following command :
-------------------------------------------------
D:oracleproduct10.1.0Db_2jdkinjava -Djava.security.properties=D:oracleproduct10.1.0Db_2sqlplusadminiplusprovider -jar D:oracleproduct10.1.0Db_2oc4jj2eehomejazn.jar -user "iSQL*Plus DBA/admin" -password welcome -shell
--------------------------------------------------------
Output as follows:
--------------------------------------------
oracle.security.jazn.JAZNRuntimeException: Configuration file "configjazn.xml" does not exist. Check your JAAS configuration settings.at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
... ... ...
Realm [iSQL*Plus DBA] does not exist in system.
-----------------------------------------------
what may be the reason for this error?
is it possible to login as SYSDBA in oracle forms from normal logon procedure?
logon(sys_acc, sys_pwd||'@'||:GLOBAL.db_conn);
The reason behind this is to make a form which will alter user's password. But all the users are in SYS account and it is necessary to login as SYSDBA in forms to execute alter statement.
When I run sqlplus and try to loging as system/<admin passwd> I get information:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I understand, that this is a common question and the common answer is don't have trailing slash in ORACLE_HOME and set ORACLE_SID. But I did this.
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export PATH=$PATH:$ORACLE_HOME/bin
export ORACLE_SID=XE
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
I need to login remote DB writing a shell script where our DB is on a separate node, i have to test the script only with
SCHEMA USERNAME
PASSWORD
HOSTNAME
PORT NO
SID/SERVICE NAME
these details. May be am wrong to ask this question but i need to login and check the requirement. Is there any other anyway to login without sqlplus utility?
I have a situation where when I login as a user to my DBvia sqlplus no service name it takes about 20 secs to connect.Yet when I login as a user with DBA privs it logs in immediately.
Is there something I can do to trace what is happneing behind scences to determine what the login delay may be..
I am trying to understand how to enable some audit so we can capture OEM logins as well.
Here is my setup. Lets say my DB that i am auditing is called audit_db (audit trail set to DB) sitting on host called host_db. and we have grid control agent on this box.now my grid control is as this. Lets say my OMS and repository is on host called OMS_host.
we run query aginst dba_audit_session to get info as to who tried failed login attemps and stuff.
Now to the part that is not working.
-- this is the good part When i intentionaly login to the audit_db with sqlplus client from my laptop with wrong username/password that is captured. we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as
os_username is the my local username(ad account)
userhost is my_laptop_name
terminal is laptop_name
from above we can figure who was trying to login(failed).
-- this is the bad part But lets say i try to login to audit_db through grid control and use wrong username/password.that gets captured too(but not all of it). we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as
os_username is the user of OMS repository db(oracle)
userhost is oms_host
terminal is unknown
Now with the above info, we cannot figure out who tried to login with bad login credential.
I got ORA-12528 while i was connecting sys as sysdba from remote machine to theinstance which is started in nomount mode. Although tnsping for that instance is working.
View 2 Replies View RelatedA function returns the metadata of named objects (Directories, Users, Tablespace....) in the form of DDL. When i execute the function in the schema having the privileges of CONNECT, RESOURCE, DBA, SELECT ANY TABLE, UNDER ANY VIEW AND EXECUTE ANY PROCEDURE, function returns the empty clob without any error. But he same function created and executed in the User having SYSDBA privilege, we get output.how to get output without SYSDBA privilege ?
CREATE OR REPLACE FUNCTION SCHEMA.DBLINK
RETURN CLOB
AS
v_meta_handle NUMBER;
v_meta_handle_trans NUMBER;
V_DOC CLOB;
V_LOB CLOB;
[code]....
I have a problem with a PCI DSS - requirement in Oracle 11.2. (PCI DSS = Payment Card Industry Data Security Standard)
Problem:
we connect via ' ssh -2 -X -l oracle hostname ' to the databaseserver and become os-user 'oracle'. we have also two offshore locations with dba's and each dba comes with his personalized user to the jumphost and then with the above ssh command to the database server.
the problem is that each dba becomes the oracle-os-account and can now connect with '/ as sysdba' to the database.in pci-dss this is not allowed !
now my question:how can I audit these '/ as sysdba'-connections and prove which user connected at which time with the '/ as sysdba' command ?
database is in audit mode. we log to syslog on linus redhat 5. I know one solution could be setting "SQLNET.AUTHENTICATION_SERVICES" parameter to "NONE" in sqlnet.ora file will make it not possible to connect to the database without a password as sysdba. (sqlplus / as sysdba). but we have to many applications and jobs and this is not really the solution in this case.
I think I can only solve this problem with personalized OS-user DBA-accounts in the dba-goup on os-site and os-user oracle should not be used for the future ?? I also need personalized dba-user-accounts in the database. using sys and system is not allowed. this users has to be locked and only for special administration work could it be unlocked.
I am working on oracle 9.0.1 version on XP.
Here I am unable to log as sysdba
I am doing like this
d:sqlplus /nolog
sql>conn /as sysdba
not working,giving an error then i tried
sql>conn sys as sysdba
again same error :_ insufficent Priv..
where as sql> conn system/manager working
I grant sysdba privilege to user1. After that i connected with user1. But i could not shutdown the database.
View 3 Replies View RelatedI have a problem with my Oracle istance and so far I couldn't fix it, I have and Oracle 11g XE istance running on windows server 2003.A couple of days ago I received the error message "ORA-00257: archiver error".I found tips in this forum and wanted to apply but sqlplus doesn't recognize my SYS user/password. I type the correct password but no chance to log in.
If I try to connect using a client like Toad, I receive the message ORA-12170: TNS:Connect timeout occurred. I checked the firewall rules, but it's ok, moreover I was logging in in the past and any change has been performed on it. I learned it's possible to change SYS password.
If I connect as "/ as sysdba" on sqlplus I read "Connected to an idle istance".In order to connect as "/" I had to update sqlnet.ora and restart the service. The parameter SQLNET.AUTHENTICATION_SERVICES
was set as NONE ad I set as NTS. I should probably have to set it as ALL? I found out the orapwd utility to change SYS password throught password file for remote login as sysdba.
I tried to create that file, and when I ran the command it asked me the SYS password, I typed it and it created the file, so I guess the password I type is correct (I had the question to type it wrong). I didn't go to the next step as I wasn't sure to make the right thing and I don't want to make this issue bigger.
As long as I can't log in as sysdba I can't perform the actions mentioned in tips to fix the error 257, but I'm also wondering if the archive error can have a side effect and deny the action of update the SYS password.
SQL> conn sys as sysdba
Enter password:
ERROR:
ORA-01031: insufficient privileges
The oracle 11g installed in eucalyptus cloud..
In the same server I can connect as a different user 'd6' but not as sysdba.
How to know the password(Exact password not hascode) of all users as a sysdba in Oracle 9i or 10g.How to convert hashcode password to Actual password.
View 1 Replies View RelatedI'm having some minor trouble with my sqlplus in Windows. Don't know which feature I accidentally edited by cosole seems to be in debug mode. Everything is ok, except that it print the old and new values of my variables. How can't I restore it to it's original behavior.
View 3 Replies View Relatedwhen i enter a sql * plus session an do a rollback; (without performing anything), always a "rollback complete" message appears even if there is nothing to rollback.
View 4 Replies View RelatedI'm running a C++ program to call sqlplus to execute some sql scirpts. The program will accept arguments from users at the command line, and execute the script which the name will also be passed in as an argument to the program eg:
./MY_PROG.sh ABC.sql 23
(MY_PROG will call ABC.sql script and pass 23 as an argument to ABC.sql)
it works fine when the argument is passed in correctly, and my ABC.sql scirpt is able to execute correctly, however when the argument is not passed in, the program just hangs there, waiting for an input from the users. This is because "&1" in my script is expecting some value from users.
Because this program will be scheduled to run, and no one will be there to monitor the job, if so happens arguments were missing, the program will wait there for the entire night. Is there any way that I could make the program or the script to exit when there is no input to be found? I can't use timeout as I do not know how long does the script take to finish it operations, I could be updating millions of record from a script.
We have two database instances on the same server. One was left at 9.2.0.7 and one was upgraded to 10.2.0.3. Connecting externally (sqlplus '/as sysdba') to the 9.2.0.7 database is lightning fast. Connecting externally to the 10.2.0.3 database is very slow, comparatively speakiing. This is on an IBM AIX-5L (64-bit) machine. We are using "tnsnames".
View 10 Replies View Relatedi am trying to copy the data from a remote database which has Oracle 8i thru Sqlplus copy command to the local database which has Oracle 11gR2.
copy from abc/abc@remote
insert emp_new
using
select *
from emp_old
where rownum < 1001;
is it possible to copy the remote database thru sqlplus copy command ?
I'm having issues with users logging into Oracle. I installed it on Ubuntu 12.04 running Oracle 11.2 XE. If i am root, i can run sqlplus just fine and log in. But when I use a regular user account and run sqlplus, it will just stay blank. No error messages or any feedback. I echo $ORACLE_HOME and echo $ORACLE_SID and they come back exactly as they do under the root account. My path is set up just like root has it.
It almost seems like a permission issue but even when i try sqlplus /nolog it stays blank.
[URL]
I have installed oracle 10g on opensuse. After i logon as normal user and type sqlplus, it was display an error message as below:-
login: nv2am
Password for nv2am:
login: Configuration file does not specify default realm when parsing name nv2am
Last login: Tue Aug 3 16:33:19 from 10.69.20.25
Have a lot of fun...
Directory: /home/nv2am
Tue Aug 3 17:36:23 MYT 2010
nv2am@ARMSDEV:/home/nv2am> sqlplus
-ksh: sqlplus: not found [No such file or directory]
nv2am@ARMSDEV:/home/nv2am> sqlplus "/ as sysdba"
-ksh: sqlplus: not found [No such file or directory]
nv2am@ARMSDEV:/home/nv2am> set ORACLE_SID="ARMSDEV"
nv2am@ARMSDEV:/home/nv2am> svrmgrl
-ksh: svrmgrl: not found [No such file or directory]
nv2am@ARMSDEV:/home/nv2am>
I want to add a value from sqlplus.
My scenario is like that i want to add the following value
select count(*) x from tab1
i need to connect several database, and each time i need to add with previous one. like that
connect a/a@db1;
select count(*) x from tab1;
then when i connect another db
connect b/b@db2;
select count(*) x from tab1;
x will add with previous one.
Here is a simple sqlplus line command with & substitution run time variable.
set verify off;
SQL> SELECT * FROM emp where sal >&SAL;
Enter value for sal:
Now as you see, oracle asks to Enter Value for substitution variable in line just below the SQL>. I wonder if there is one or more line could be left there so to improve the readability. So it should look like:
set verify off;
SQL> SELECT * FROM emp where sal >&SAL;
Enter value for sal:
My database in on 10.2.0.3 and facing hang problem when I am connecting to sqlplus.
bash-3.00$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Aug 29 00:54:03 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-01075: you are currently logged on
As per Metalink note(215858.1) suggested in forums I have followed steps and produced results below.
bash-3.00$ sqlplus -prelim
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Aug 28 23:28:02 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: / as sysdba
SYS on test>oradebug help
SYS on test>oradebug setmypid
Statement processed.
SYS on test>oradebug hanganalyze 12
[code]...
Now I have got struck how to analyze above results.
running CENTOS 6 and oracle DB 11.2.0 and when i try to launch sqlplus i get the following error:
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
problem is, it's telling me to set ORACLE_HOME but I'm not sure where this is to set.
I'm trying to create a new table which has a date field (date of birth) and I want to include a constraint which will not allow me to add values if they are over 21 years old. I'm using SQLPlus .
View 3 Replies View Related