TNS - Listener Does Not Currently Know Of Service?
Feb 27, 2013
I am new to Oracle DB. I have installed Oracle 10g in XP Service Pack2 and was able to login using SYS/SYSTEM users and also was able to create a new user XYZ...
Once I restarted my system, I am facing a strange problem while login. It is continuously throwing the error "tns: listener does not currently know of service requested in connect descriptor". I do not understand the reason. I have checked the services and all oracle related services are running.
However, when I tried to login with the same userid/password from command prompt using 'sqlplus' command, I am able to login ! There was no error this time.
View 2 Replies
ADVERTISEMENT
Aug 30, 2011
I need to create another listener service in RAC 11gR2 env for a new application connecting to the database in 11gR2 env. I have an existing listener service listening on 2 RAC instances now.The new one needs to be created will have a new service_name, preferably using different port (other than 1521), listening on same same set of instances.
View 3 Replies
View Related
Jul 15, 2010
I am using Oracle 10g and when i start my server then my database is running and my application use this database.But after 15 min automatically application show this error
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
View 1 Replies
View Related
Nov 19, 2012
I am facing problem "ORA-12514" error. my database is register in listener but when i connected throw "sqlplus" then i got "ORA-12514" error.
As show below
[oracle@sun3 ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 19-NOV-2012 14:40:15
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias listener1
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
[code]....
View 14 Replies
View Related
Jan 31, 2013
ORA-12518 Tns: Listener does not currently know of service
from application server using client 10g to connect our database.This problem happens only in application server and we tried from another server we can connect to database easily but problem only in application server.
this error since TNSNAMES and network are properly hosted since there no network disconnection betwwen database server and application server.
View 1 Replies
View Related
Nov 18, 2012
I am getting the following error.
C:>sqlplus sys/oracle@duptest as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sun Nov 18 17:58:22 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Enter user-name:
My tnsnames.ora is as follows:
# tnsnames.ora Network Configuration File: C:appAliproduct11.2.0dbhome_1NETWORKADMIN nsnames.ora
# Generated by Oracle configuration tools.
DUPTEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-LRTU6C15D75.localdomain)(PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = duptest.localdomain)
[code]....
The command completed successfully
View 6 Replies
View Related
May 22, 2012
On last Saturday we encountered error 'TNS-12519: TNS:no appropriate service handler found" in our listener log for some moment of time let say around 5mins and later it got all right itself.
View 3 Replies
View Related
Apr 25, 2013
I am not using RAC (to my knowledge), but I installed grid so I can use ASM with my RDBMS.
Recently I noticed that the "CRS Listener" service was not started, when I try to start it then it immediately stops. It does not seem to affect the databases, they are still up and running. What is this service used for and how can I get it to start. I am using Oracle Enterprise Server 11.2.0.3 and Grid 11.2.0.3 on a Windows 2008 R2 64-bit server.
View 2 Replies
View Related
Dec 22, 2012
I just finished my first course in SQL for Oracle 11g at my local community college. We used SQL*Plus for the coursework and for the next class I need to use SQL Developer. Initially, I installed the Developer and was unable to establish a test connection due to the listener not being installed. I fiigured out that I needed to use the Network Configuration Assistant to add and configure the listener. After doing so, I was able to connect using Developer. The issue, however, is that any time I restart my computer, the TNS Listener service disappears from the list of services in Task Manager and I have to delete and then add and configure the service again using Network Configuration Assistant. Obviously, the Listener still exists because I can delete it and then recreate it.
View 4 Replies
View Related
Jan 25, 2010
im getting error ORA-12514.our prod db runs under default listener.nw i have configured another listener.if i try to connect from the loacl im grtting above error,bt im able to tnsping from the local system.
View 8 Replies
View Related
Oct 4, 2011
I am trying to connect to Oracle 11g using ODBC.I created a data source name from Admistrative Tools->ODBC Data Sources.I selected Oracle in OraClient11g_home1 as the driver. I tested the connection and it was succesful.I tried to connect from visual studio. I used the Data Source as Microsoft ODBC Data SOurce. Selected my DSN from drop down (LORAC). I gave the user name and password and got the followign errors:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
This is my tnsnames.ora located in C:oracleproduct11.1.0client_1
etworkadmin directory.
# tnsnames.ora Network Configuration File: C:oracleproduct11.1.0client_1
etworkadmin nsnames.ora
# Generated by Oracle configuration tools.
LORAC =
(DESCRIPTION =
[code]...
When i do tnsping LORAC, i get OK. When I do tnsping of the other service name i get Failed. However when I try to connect to that service from Visual studio I get a differnt set of errors:
ORA-12154: TNS:could not resolve the connect identifier specified
[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
I had assumed that as the test connection from ODBC Administrator had worked I would be able to connec to my database from viusal studio. Is there something wrong in my tnsnames.ora? The content or its directory location?
View 8 Replies
View Related
Aug 30, 2010
We are trying to configuration the Dataguard in Oracle Database 10g Enterprise Edition Release 10.2.0.1.0. While we check the lsnr configuration the following error has occured.
SQL> select name from v$database;
NAME
ACCLDATA
SQL> select status,error from v$archive_dest;
STATUS ERROR
VALID
ERROR ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
INACTIVE
INACTIVE
INACTIVE
[code]...
View 3 Replies
View Related
Feb 4, 2013
I want to upload file using restful service This is my code to send file to rest service
MultipartEntity reqEntity = new MultipartEntity(HttpMultipartMode.BROWSER_COMPATIBLE);
FileBody bin = new FileBody(f);
FormBodyPart bodypart = new FormBodyPart("file", bin);
reqEntity.addPart(bodypart);
[code]...
But how can i retrive at server side in restful service using plsql?
View 0 Replies
View Related
Feb 9, 2010
I have oracle 11g on windows xp. I can connect to oracle by SQL Plus without any problem, but when i want to connect to oracle by Toad or SQuirrel i see this error:
PTM Coding: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
my listner.ora and tnsnames.ora come below:
listner.ora:
# listener.ora Network Configuration File: C:appKiarashproduct11.1.0db_1
etworkadminlistener.ora
# Generated by Oracle configuration tools.
[Code].....
View 4 Replies
View Related
Mar 22, 2010
One of our requirements is to secure the listener and other Oracle services by running them as a local OS account rather than as LocalSystem on the server.
I created a local OS account (assume it's named oracleuser), assigned it to the User and ORA_DBA groups on the server, and then I went to the Local Policies and added oracleuser to "Deny log on locally" and "Log on as a service".
I opened up the Services utility and stopped the four Oracle services we have running (OracleMTSRecoveryService, xxx_home1iSQL*Plus, xxx_home1TNSListener, and OracleServiceMYDB). I changed the "Log on as" for each service to oracleuser with its password (copied and pasted so I know there are no typo's), and restarted the services.
All the services except the listener started up. Attempting to start the listener caused the following error:
"The xxx_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service."
I tried rebooting the server and had the same result.For now just the listener service has been switched back to logging in as LocalSystem while the other services continue to use the local OS account and the database seems stable, but I do need to figure this out.
View 2 Replies
View Related
Feb 13, 2012
I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
View 2 Replies
View Related
Feb 15, 2013
I'd like to call an existing function/procedure from a resource template. For example, I have a procedure called 'rest' with an out parameter of 'p_out' - how do I use this within a resource template?
At the moment I have defined the template as type 'PL/SQL Block' and with the 'GET' defined as:
begin
myschema.rest(:p_out);
end;
APEX_PUBLIC_USER has been granted 'all' on the procedure. The p_out is populated with a piece of text.
When I call this resource, I get a '500 Internal Error' returned. I've tried adding p_out as an X-APEX-FORWARD parameter, but nothing seems to work.
Query-based templates seem to work OK.
Using Listener 1.1.3 with Tomcat6.
View 0 Replies
View Related
Mar 11, 2010
I am using oracle 11.2.0 in linux platform.i have created a listener for the asm database. and i am using non default port of 1525 whenever i go for lsnrctl>status always shows for the port 1521. i don't want the default port 1521 and i have changed the local listener as listener1 with port 1525 protool tcp in spfile and registered with the asm database.Is there any option to change the default listener as listener1.
also,everytime when i give lsnrctl>show current_listener it is showing "listener"
i have set the current-listener to listener1 and save_config listener1 and reloaded.After exit and enter lsnrctl>status it will show for port 1521 When i attempt to start listener1 every time. it will prompt listener1 is already running.
View 8 Replies
View Related
Jul 5, 2010
In one of our RAC envrionment, we have more than 15 databases in a server running in AIX Operating system.the Listener file I am able to find only one entry (SID). But while trying to execute lsnrctl status it displays all the 15 SIDs in the list hosted in the ser ver. Not sure how it works?
As we created another one new database in the database, where i need to add this SID in the listener.ora file to reload the listener.
View 4 Replies
View Related
Jun 29, 2012
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
View 2 Replies
View Related
Nov 22, 2011
We are working on a POC to build Web services from Oracle PL/SQL packages. For this we need to create a PL-SQL package having a stored procedure which will accept one input parameter and sends out data sets with multiple rows.
The type of the output parameter should be compatible with JDBC so as to publish the package as a web service. We tried using an Array and Ref cursor in PL/SQL but it didn't work with JDBC.
what type of PL/SQL output we should use here?
Our Environment : Oracle 10.2.0.3.0, Jdeveloper (to convert PL/SQL package into to Web Service) and Web Logic 11G server to deploy the services.
View 4 Replies
View Related
Mar 1, 2013
Oracle 11.2.0.x
Reference: Accessing PL/SQL Stored Procedures using a Web Service (<i>Oracle® XML DB Developer's Guide</i>).
The feature works fine. Have tested a number of custom written PL/SQL procs this way - using it as a web service, and SoapUI and UTL_HTTP procedures as clients, calling the web service.
Question.
Can one support WSS (Web Services Security) with this feature?
I've added a WSSE to the SOAP envelope header when making the call - using standard password (no digest) and default addressing. The orawsv XDB servlet accepts the call, parses the SOAP envelope, and successfully executes the relevant PL/SQL procedure.
It however uses Basic Authentication (schema name and password). Not WSSE.
As the WSSE authentication data is part of the SOAP header (and not envelope body), the relevant PL/SQL procedure of course does/can not see the WSSE details. (also would not make sense ito how XDB abstracts orawsv as a web service interface and allows standard vanilla PL/SQL procedures and functions to serve as web service endpoints).
So if WSSE is to be supported, it would likely mean it needs to be supported in XDB itself. And that is outside my little area of Oracle expertise.
Not much on the net (lots about UTL_DBWS), and just a couple of basic orawsv supports notes on Metalink.
View 2 Replies
View Related
Dec 24, 2012
I need to determine the max date of service for each mbr_idfrom the following data:
mbr_id mbr_asc mbr_dept mbr_service
1162903 00 1723 01-MAR-11
1162903 00 1708 12-DEC-11
1162903 00 1708 12-AUG-12
2262903 01 1723 01-MAR-11
[Code]....
Results should be:
mbr_id mbr_asc mbr_dept mbr_service
1162903 00 1708 12-AUG-12
2262903 01 1708 21-AUG-12
3362903 00 1708 23-AUG-12
4462903 00 1708 24-AUG-12
5562903 00 1708 25-AUG-12
View 6 Replies
View Related
Aug 29, 2011
I have a question regarding the SQL statements embedded behind the Self Service Pages in Oracle Applications.
Taking an example of Oracle E-business Suite, Is there a way to check what SQL statement is hard coded or embedded in a particular required Self Service Page?
View 1 Replies
View Related
Oct 16, 2010
I have a "pure" client / server environment with forms/reports 6i (NO form server architecture) and my necessity is to retrieve data from Web Service Call within Forms.
Do you have any simple example for realize this? Javaimporter is the right solution or not?
View 1 Replies
View Related
Dec 11, 2012
I am trying to send SMS through a web service, and before doing it on a form, I tried to check this with UTL_HTTP from sql plus
below given is the code i tried
SQL> SET DEFINE OFF
SQL> SELECT UTL_HTTP.REQUEST('http://80.227.146.106/Receiver/sms99.aspx?usr=JOE123&pass=JOE321&
msisdn=971556221690&msg=test msg through ibuzz&mt=0') FROM DUAL;
and am getting the result as shown below
UTL_HTTP.REQUEST('HTTP://80.227.146.106/RECEIVER/SMS99.ASPX?USR=JOE123&PASS=JOE321&MSISDN=97155
<HTML><HEAD>
<TITLE>Request Error</TITLE>
</HEAD>
<BODY>
[code]......
Your request used a protocol that is not currently supported.
</TD></TR>
UTL_HTTP.REQUEST('HTTP://80.227.146.106/RECEIVER/SMS99.ASPX?USR=JOE123&PASS=JOE321&MSISDN=97155
<TR><TD>
</TD></TR>
<TR><TD>
</TD></TR>
</TABLE>
</BODY></HTML>
**********-----------------------------------------------------------------------------------------------------------------------------------------------------------********
protocol used for the web service is HTTP. they have given an IP with port number . and the method is GET
[URL]........
parameters are msisdn, msg, mt their response would be either true or false. I tried this on Oracle9i Enterprise Edition Release 9.2.0.1.0
and the message is Your request used a protocol that is not currently supported. when i tried the same on Oracle Database 11g Release 11.2.0.1.0
i got
Request Error (unsupported_protocol)
View 0 Replies
View Related
Jul 20, 2012
I have created a program to access a oracle database using oracle.data access, .net framework 4, visual studio 2010 in C#. The program runs without any problem. If I try to create a windows service, I receive the error
Service cannot be started. System.BadImageFormatException:
Could not load file or assembly 'Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies.
An attempt was made to load a program with an incorrect format.
File name: 'Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342'
when i execute the command
GlobalVariables.conn = new OracleConnection(oracelString);
View 3 Replies
View Related
Sep 12, 2013
We have a requirement to download data from SAP system to our Oracle DB. Issue is we will not be able to connect to SAP DB. They will provide a webservice and we should use that by passing parameters. My query is, how can we do that in Oracle DB. I want to write a Program unit and call web service whenever required.
View 5 Replies
View Related
Oct 26, 2013
OS :
6100-01-09-1015
oralce:
11.2.0.1.0 - 64bit RAC
View 1 Replies
View Related
Mar 5, 2013
I am trying to call a Web service using the SOAP API and I get the following error.
ORA-31020: The operation is not allowed, Reason: For security reasons, ftp and http access over XDB repository is not allowed on server side
ORA-06512: at "SYS.XMLTYPE", line 48
ORA-06512: at "MyConnection.SOAP_API", line 121
ORA-06512: at "MyConnection.MyFunction", line 28
31020. 00000 - "The operation is not allowed, Reason: %s"
*Cause: The operation attempted is not allowed
*Action: See reason and change to a valid operation.
However we do have another procedure that is able to make an HTTP call successfully within the same domain. Hence the ACLs that are required are for making an HTTP call are in place. Is there any other security setting to be tweaked to make the to enable me to make a Webservice call using the SOAP package?
View 1 Replies
View Related
