I have a requirement like getting list of values from one table and inserting them into another table.I have tried with sub querying but didn't worked out because the select query is returning multiple values.
how to proceed further and the ways how can I write this requirement.
I am looking to simplify the below query,
DELETE FROM A WHERE A1 IN (SELECT ID FROM B WHERE BID=0) OR A2 IN (SELECT ID FROM B WHERE BID=0)
Since both the inner queries are same,I want to extract out to a local variable and then use it.
Say,
Array var = SELECT ID FROM B WHERE BID=0;
And then ,
DELETE FROM A WHERE A1 IN (var) OR A2 IN (var)
How to do this using SQLPLUS?
is it possible to use the records returned by a query as column names in a select query.
select (select column_name from dba_tab_cols where table_name='V_$DATABASE' and column_name like '%CONTROL%')
from v$database;
*
ERROR at line 1:
ORA-01427: single-row subquery returns more than one row
Is there a way to loop through a list of literal values.
For instance
create table car(
name varchar2(11),
passengers int,
price int
);
insert into car values ('fiat',1,1000);
insert into car values ('bmw',2,2500)
insert into car values ('ford',2,1500)
insert into car values ('ferrari',4,5000)
select
max(price)
from car
where passengers=1
How can i in a single query do this for where passengers = 1
then passengers = 2
then passengers = 3 etc
where i have a list of possible values for passengers.
Just to update I realise this can be done with
select
name,
max(price)
from car
where passengers in (1,2,3)
group by name
but in just wanted to know if there is a way of iterating through a literal list in tsql
I am trying to select multiple values from a parameter form based on a select statement.
I created the parameter and write the select statement under list-of-value property However what I want is to let users choose multiple values from the select statement not only one value.
I need to get multiple code values and put it into a variable which later need to pass into the where clause of an sql. But i am not getting any results even i pass those values in the variable of an where clause: below is my Procedure:
declare
TYPE crMain_record is RECORD (
v_code dummy.v_code%type,
n_no dummy.n_no%type,
[Code].....
END;"lv_character" is going to hold the multiple code values which i need to pass into whare clause of the above SQL: the totlal number of these mulitipe codes can be more then 50..
And lv_character values are commung from a setup table
lv_character varchar2(32767):= '('||''''||'COMMIS'||''''||' , '||''''||'AGY BUILDING BENS'||''''||')';
--And lv_character values are commung from a setup table.where "lv_character" holdes multipe code values...
And lv_character values are commung from a setup table and upper(d.v_code)in lv_characterif the
I created a package with some types, and every was compiling fine. However, when I ran the new function, I got an error: ORA-21700: object does not exist or is marked for delete
After a little research, I realized that the types would have to be declared outside the package. As soon as I did that, I suddenly started getting the "not enough values" errors on all my types. I compared the number of columns being returned, and the number of columns in the type, and they match.Here is my type code:
CREATE OR REPLACE TYPE TSA_CUSTOM.Lost_Plan as object (
LP_Key number, -- The member key of the plan that is going away
LP_Type varchar2(20),
LP_Dept varchar2(12),
LP_SubDept varchar2(12),
LP_Class varchar2(12),
LP_VendorName varchar2(50)
[code]...
i am using Apex 3.2 ver.
i want to use below code in LOV select list
BEGIN
IF UPPER(:P23_SERVICE_TYPE) like 'GUIDE%' THEN
SELECT NAME D, CODE R FROM SPECIAL_SERV_MAS
WHERE NVL(ACTIVE_FLG,'N') = 'Y'
AND NVL(GUIDE_FLAG,'N') = 'Y'
and CITY_CODE LIKE NVL (:P23_CITY_CODE, '%')
[code]....
When i put this code in my LOV Select list Section then display me Error
Not Found The requested URL /pls/apex/f was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at tidevserv1 Port 7777
I am trying to create a tabular form based on a SQL query, that has a query-based select list with a where clause that references a column in the originating SQL query.
The situation is, I have a table that stores client_id, source_id and build_id, lets call it client_source. I have a second table, build_source, that contains source_id and build_id, with a one to many relationship between the two (source_id of 1 could have build_id of 1-7).
Using a tabular form, I want to select the corresponding build_id to be used in client_source, but the select list must only contain the build_id's for that rows particular source_id.
Here is an example of the SQL source of my tabular form;
select
s.ROWID,
s.CLIENT_ID,
s.SOURCE_ID,
APEX_ITEM.SELECT_LIST_FROM_QUERY(1, s.BUILD_ID,
'select b.build_id display, b.build_id return from
build_source b where b.source_id = s.SOURCE_ID ') lst
from client_source s
... what I am trying to achieve is that the source_id fields in bold match. When the query is built this way I get an 'invalid identifier' Oracle error on s.SOURCE_ID at runtime.
Is there some special tags that need to be used to reference the outside column?I am running on Application Express 4.1.0.00.32, on a Oracle 10g release 10.2.0.4.0 database.
I have this situation:
a tabular form with two "select list (query based LOV)" fields. The first one must affect elements in the second one. And so the second query based LOV field should has a "where attr1 = first_list_selected_value" in the query.
I created a "Select List" in the Shared Components area as follows:
My goal is to create a shared select list that can be used on any form for a particular Field.
IF :P10_FK_RSTA_CODE is NULL THEN
RETURN
'select col_description, col_code_pk
from CODE_TABLE
where col_active_ind = ''Y''';
[code].....
Which works great, but how can I make the select list work for the same column on a different form? Because :P10_FK_RSTA_CODE is hard-coded in the function, I can't reuse this Function from a different form. (I could rename the Field on every form to the same name, but I'm hoping there is a better way.)
Is there a way I can pass in a variable from the Field Item to make this dynamic where I can use it on any form?
I have a requirement to execute the query only once for all the columns mapped to a particular table. Lets take an example..
table t1 has the following columns mapping.
col1 col2 col3 col4
variable 1 table abc col1_abc ----
variable 2 table abc col2_abc ----
variable 3 table xyz col1_xyz ----
variable 4 table xyz col2_xyz ----
variable 5 table xyz col3_xyz ----
variable 6 table xyz col4_xyz ----
In col4 , we have to update the values of col3 (column) ... it is very easy to update the values by executing the query for each column but my requirement is ... I want to execute the query once for a table ( example select col1_abc,col2_abc from table_abc ... this will return always a single value after adding other conditions in where clause) and why I want to do this? .. because there can be multiple (might be 30 variables values)
from a single table.
I have converted the columns into rows by using listagg function now I have lets a dynamic query ( for the above example).
for i in 1.2
loop
l_query := ' select col1_abc, col2_abc from table_abc';
open c1 for l_query;
end loop;
my problem is : how to hold these values and update the above table?
difference in the values that are returned?
select count(*) from aaa;
COUNT(*)
----------
1000001
select num_rows from dba_tables where table_name = 'AAA';
NUM_ROWS
----------
994202
I have some issues in passing array values to IN clause.
I am passing a String Array from Java to PL\SQL and want to use the Array values in the IN CLAUSE of Select Query
cust_array is the Array
search_id VARCHAR2(1000);
search_id := '';
FOR j IN 1 .. cust_array.count
LOOP
IF (j != 1) THEN
search_id := search_id || ''',''' || cust_array(j) || ''';
ELSE
search_id := search_id || '''' || cust_array(j) || '''';
END IF;
END LOOP;
trying to form a string of below form: search_id '3211335201','3211335209','3211335279','3211335509'
and use the string search_id in the IN clause of the search Query select * from DPP_EMP where empl in (search_id)
but the query does not returns any result
When I try to hardcode the values in the query as below, its returing 4 rows
select * from DPP_EMP where empl in ('3211335201','3211335209','3211335279','3211335509')
How to achieve this (String to the IN clause) or is there a better way of passing the Array values to the IN clause
i have table with following data.
yearquartersales Revenue
2004Q145678
2004Q287456
2004Q356732
2004Q4120986
2005Q12398
2005Q23900
2005Q36522
2005Q42763
I want the output in following way.tell me the select query for this
yearquarterSales Revenue
2004 Q145678
Q287456
Q356732
Q4120986
2004 total Sales310852
2005 Q12398
[code]....
The prob is i want to display minimum intime and max outtime in idate against employee,report keep displaying multi inout records of an employees!
SELECT div.division,
DEP.department,
E.employeecode,
E.name empname,
DES.designation,
i.idate,
To_char (Min(i.intime), 'HH:MI:SS AM'),
To_char (Max(I.outtime), 'HH:MI:SS AM'),
Round(i.btime / 60),
e.shift
[code]....
I am importing some data from Oracle into another database on a regular basis. It works fine for most of the queries but couple of queries don't work sometimes (random). I don't get any errors or any data.
We switched on the Oracle auditing to find out the queries being sent to oracle db. We can see all the queries in the Audit log. Is it possible to configure Auditing to get the "Number of Rows" returned by Select statements so that we can be sure that some data was returned.
DECLARE
l_query VARCHAR2(4000);
TYPE cursor_type IS REF CURSOR;
[Code].....
How can I get the total number of rows returned by the query?
I want to be able to check omething like c1.ROWS = 0
How Can I delete the returned two rows?
1 select s.reg_no,s.course_code,
2 s.section src_sec,a.section a_sec,a.att_date,a.att_flag
3 from attendance a ,src s
4 where a.semester_code=1
5 and a.semester_year=2013
6 and s.semester_code=1
[code]....
I'm attempting to use dynamic SQL to execute a function that returns a user-defined collection. The problem is that I don't know how to use dynamic SQL to handle user-defined types...or if this is even possible?
The code I have is as follows:
CREATE OR REPLACE PACKAGE qi_test IS
TYPE typ_qi_data IS RECORD(
iQIFlag NUMBER(1),
iIPFlag NUMBER(1),
iRiskIndicator NUMBER(1),
iDenominator NUMBER(8),
iNumerator NUMBER(8)
[code]........
I want to be able to execute the above function using dynamic SQL. Initially tried:
DECLARE
f2_data qi_test.typ_qi_data_tab;
BEGIN
EXECUTE IMMEDIATE 'begin :1 := qi_test.get_f2_data; end;'
USING OUT f2_data;
[code]......
...but this just produces "PLS-00457: expressions have to be of SQL types". So it looks like I can't do it this way if the returned data type is user defined. I know it would be easier in this instance to just use something like:
f2_data := qi_test.get_f2_data;
...rather than EXECUTE IMMEDIATE, but it's the principle that I need to get right as it forms part of a much bigger piece of work.
I M USING APEX 4.1 AND CREATED SELECT LIST ON PAGE, I WANT TO SHOW MIN VALUE OF THE SELECT LIST FOR THAT I WROTE IN THAT SELECT LIST PROPERTIES UNDER DEFAULT TAG MIN; AND CHOOSE PL/SQL EXPRESSION BUT ITS GIVING ERROR "Error computing item default value for page item P1_PRODUCT."
BUT IF I HARDCORE THE VALUE CONTAINING IN MY DATA LIKE PRODUCT ID = 1, I HARDCODED IN DEFAULT VALUE 1 AND SELECT PL/SQL EXPRESSION IT WORKS.
BUT ITS NOT DONE LIKE THIS I WANT TO SELECT BY DEFAULT MIN VALUE OF THE SELECT LIST, SO THAT THE DATA SHOULD BE DISPLAYED ACCORDING TO THAT.
THE EXACT REQUIREMENT IS TO ENTER THE SELECT LIST DEFAULT VALUE IN SESSION SO THAT DATA IS TO BE DISPLAYED.
I want to get the list of values which is not the given list .
I have the below data in my emp table
SQL> select emp_id from emp;
EMP_ID
----------
101
102
103
104
105
106
108
110
120
220
225
11 rows selected.
But I need to display the values from the list of values which are not in the emp table . So the result will be '3000,3002,3003'.
SQL> select emp_id from emp where emp_id ?;
EMP_ID
----------
3000
3002
3003
I have developed one sample form using oracle Internet developer Suite 10g. It has two fields.
1.all employees(I set as combobox)
2.members (i set as text box)
In runtime all employees column has all the employee name displayed . If i select the employee name one by one it added into the members textbox. How to solve that issue?
I have a list of values from a spreadsheet and want to know which values are NOT matched in columns of a table
here's the list (really 4000+ long)
1234,
2345,
3244,
and I want to find the values that are not in the table 'table_name' like this
....
where not exists (Select number_n from table_name
where number_n in ('1234', '2345', '3244', ...(the list above))
I need a query to get the below.
Source :
select * from test;
LVL
1
2
3
1
2
3
4
Output:
LVLSEQ
11
21
31
12
22
32
42
I need above to uniquely identify the set of data.
I had a table main with 2 fields. please see the contents below.
seq name
a aaa
b bbb
c ccc
d ddd
1. My query is as below
select seq,name from main where seq in ('a','b','c','b','d','d') output of query is
a aaa
b bbb
c ccc
d ddd
but I need the output to be as shown below.
a aaa
b bbb
c ccc
b bbb
d ddd
d ddd
I need to display all the values in the same order as in the "IN" list.
say i got 10 select list each with value yes or no
I need to fire a dynamic action so i have a variable which will show the count of select list selected which has been selected as yes or no...
How can i accomplish this is apex 4.2 db 11g ?
I am using PL/SQL Developer.I have two tables: A and BTable A contains serial_from and serial_to values.This is used to define the serial numbers issued to customers (i.e. the start and end range of serial numbers issued).Shown here for a client:
Table B contains the individual numbers, B.serial (within the serial_from and serial_to range) along with other data, and is only created when the serial is used by the client.
I would like to create a list of records for individual clients containing serial numbers issued but not used. i.e. they are in between the serial_from and serial_to values in Table A, but not in Table B.
How can I create a list of numbers issued, but not yet used? Because Table A contains only two values (to and from) no record exists for them, so how do I generate a list and check against it?
I have made one LOV for vendor_names. On form level i want that when the user will enter a particular alphabet in a textbox assigned with LOV, the list should popup with only those elements starting with that particular alphabet. I have written the following code in the query of LOV wizard
query:
select distinct(bpt_ven_nm),bpt_ven_cd from bill_hdr1_tab
where bpt_ven_nm like ('enter.vendr_nm'||'%')
order by bpt_ven_nm
Wherin 'Enter' is the name of block and 'vendr_nm' is field name.
But its getting unsuccesfull. Any alternate way to get this result.
I have two list items and from left list item values are populated to right list item through Add and Remove buttons and vice versa.My requirement is
1.) I need to sort the values of list item whenever a new element is added to the list item.
