Server Administration :: Cannot Start Listener (/tmp Related)
May 9, 2012
OS: AIX 6.1 64bit
DB: Oracle 10gR2 (10.2.0.5.0)
What we did is..
1. Install patch 6613550 (./rootpre.sh)
2. Install 10.2.0.1 for AIX 64-bit
3. Install 10.2.0.5 Patch Set
4. Create Database
5. Created/Setup LISTENER and TNSNAMES (test connection successful)
After installation of database, everything went well until we tried to restart the server, what happened is that we cannot start the listener, the error was:
TNS-12555: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00525: Insufficient privilege for operation
IBM/AIX RISC System/6000 Error: 1: Not owner
What i did to resolve this problem is to change the owner of /tmp to oracle, after that i was able to start the listener. ($lsnrctl start) The problem is that our sys admin said that the /tmp directory is being used by the OS and it's owner must be root. But if i return it to root, the listener will not start again. (After server restart)
BTW, our /tmp has enough space so we did not perform the following steps from the installation guidelines:
$TEMP=/directory
$TMPDIR=/directory
$export TEMP TMPDIR
I was thinking if that we must make a temp directory for oracle and set it in the profile, or change the owner to root again and perform this:
$chown -R oracle:oinstall /tmp
$chmod -R 777 /tmp
View 2 Replies
ADVERTISEMENT
Dec 12, 2011
We are getting the below error in between from database. The database throws the below error some times only not continuous.
ORA-12500, TNS:listener failed to start a dedicated server process.
View 6 Replies
View Related
Oct 31, 2011
How to find out the tablespaces specific to application (i.e. not related to oracle like system, sysaux,temp,undo etc..)
View 1 Replies
View Related
Mar 16, 2011
I have setup a RAC machine of two nodes on Oracle 10GR2(with 10.2.0.4 Patchset). All setup went well. I am able to connect one node from sqlplus but the other node is connected to idle instance. I tried to startup the database with mount and nomount option but it fails. Following is the error :
SQL> startup nomount;
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/LCLCLKS/spfileLCLCLKS.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/LCLCLKS/spfileLCLCLKS.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
SQL>
I am using ASM and it is running on both nodes even I am able to connect the SQL prompt from it. I am able to view the diskgroups I created from the second node but through "asmcmd" option I can't go inside the disk group. It gives :
ASMCMD> ls
DATA/
INDEX/
ASMCMD> cd DATA
asmcmd: diskgroup 'data' does not exist or is not mounted
On first node, everything is fine and I am able to import the database on it, as well.
View 9 Replies
View Related
May 4, 2010
I start my database and suddenly got this error:
ORA-00371: not enough shared pool memory, at least 72102521958 bytes
How to fix? I use startup command only and shutdown when shutdown the database.
View 2 Replies
View Related
Apr 27, 2013
I have oracle8i database on windows 2008 but not a domin server now i have domin server and i want to join this server on domin network i try to join domin it fine but my oracle8i service did not start what to do ?
old hostname=bagmati
afterchange hostname=bagmati.alkatel.org.np
View 3 Replies
View Related
Jan 20, 2012
I need to add some kind of tracing in oracle 11g on linux when oracle starts and stops - as at times oracle takes a long time to start.
View 9 Replies
View Related
Aug 30, 2010
Recently, I've just restored my QAS database and filesystem from my backup tape. I have checked all the configuration files and oracle setting files and do not notice any problem.
However, when I tried to start my listener, it shows some error messages as below. As a result, I'm unable to start my SAP application.
Error:
-------
Instance "QAS", status UNKNOWN, has 1 handler(s) for this service...
For you information, I'm able to start my Oracle instance. Please refer to below.
SQL> startup mount
ORACLE instance started.
Total System Global Area 5620367360 bytes
Fixed Size 2064184 bytes
Variable Size 2818572488 bytes
Database Buffers 2785017856 bytes
Redo Buffers 14712832 bytes
Database mounted.
oraqas 3> lsnrctl start
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 30-AUG-2010 12:57:25
Copyright � 1991, 2007, Oracle. All rights reserved.
Starting /oracle/QAS/102_64/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
System parameter file is /oracle/QAS/102_64/network/admin/listener.ora
Log messages written to /oracle/QAS/102_64/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS.WORLD)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=drqaecc)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=QAS.WORLD))
STATUS of the LISTENER
-------------------------------
Alias LISTENER
Version TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
Start Date 30-AUG-2010 12:57:29
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/QAS/102_64/network/admin/listener.ora
Listener Log File /oracle/QAS/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=QAS)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=drqaecc)(PORT=1527)))
Services Summary...
Service "QAS" has 1 instance(s).
Instance "QAS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
View 6 Replies
View Related
Jun 27, 2012
We have a requirement from the customer to start using data and index compression in our 11g database.. Is this something available in Oracle 10g,11g without any additional costs? We are not sure if this will work with our application so we will have to test it in-house, is it possible to compress the existing table data/index to test it out?
View 3 Replies
View Related
Mar 1, 2011
I am having a problem getting my listener to start.
[oracle@jhlinux ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 01-MAR-2011 23:26:30
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/jhlinux/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jhlinux.home.com)(PORT=1521)))
[code]...
View 36 Replies
View Related
Feb 27, 2011
I could not able to start the listener if i have named it other than the default name: LISTENER and the default Port:1521
if I name it list and port : 9999 it is throwing an error as
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-FEB-2011 13:02:23
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /oraeng/app/oracle/product/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /oraeng/app/oracle/product/11.1.0/listener.ora
Log messages written to /oraeng/app/oracle/product/11.1.0/log/diag/tnslsnr/server1/list/alert/log.xml
TNS-01151: Missing listener name, list, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
Should i have to do some changes in sqlnet.ora for overriding the default settings?
View 17 Replies
View Related
Sep 23, 2011
after creating database i try to start listener i have copied listener.ora and edit according to db created i have folling issues.
LSNRCTL for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production on 23-SEP-2011 15:02:05
Copyright (c) 1991, 2006, Oracle Corporation. All rights reserved.
Starting /u01/app/oracle/product/bin/tnslsnr: please wait...
TNSLSNR for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
System parameter file is /u01/app/oracle/product/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.1.17.43)(PORT=1521)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
Listener failed to start. See the error message(s) above...
View 16 Replies
View Related
Nov 2, 2011
i could not able to add and open listener to install Oracle database 11g R2 on window 7 ( 64 bit OS).
Steps :
1) i installed Oracle 11g R2 Software Only.
2) Started DBCA to configure Database
3) I got a message that i need to configure Listener first.
4) I opened NETCA and add a listener ( default name LISTENER)
5) Then re-opened DBCA to start Database configuration and found the same message configure listner.
6) I went to control panel-> Services -> i found no listeners there
7) i started NETMGR and add a listner and its location as well I started DBCA and found the same message add listener
9) i opened LSNRCTL and typed the command to START LISTENER and i found no listener error
10) When i am trying to add listener using NETCA ,during it's last step listener adding completion i found the below message :
Oracle Net Services Configuration:
Stopping Oracle Net Listener:
Running Listener Control:
d:apporacleproduct11.2.0dbhome_1inlsnrctl stop LISTENER
Listener Control complete.
Listener stop failed.
[code]....
View 4 Replies
View Related
Apr 25, 2013
I am not using RAC (to my knowledge), but I installed grid so I can use ASM with my RDBMS.
Recently I noticed that the "CRS Listener" service was not started, when I try to start it then it immediately stops. It does not seem to affect the databases, they are still up and running. What is this service used for and how can I get it to start. I am using Oracle Enterprise Server 11.2.0.3 and Grid 11.2.0.3 on a Windows 2008 R2 64-bit server.
View 2 Replies
View Related
Dec 30, 2011
when i try to run dbstart i got Message like "
ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener
Usage: /u01/app/oracle/product/11.2.0/dbhome_1/bin/dbstart ORACLE_HOME
Processing Database instance "orcl": log file /u01/app/oracle/product/11.2.0/dbhome_1/startup.log
how to set oracle listener ? i tried using listener.ora file again show the same error
View 3 Replies
View Related
Feb 25, 2013
I am trying to use the Apex listener 2.0 (instead of HTTP server). I installed and went thru the configuration of the listener, but I must be missing something. When I do the java -jar apex.war to start it up in standalone mode, I get the configuration properties etc., but when I open up my browser and try to bring up APEX with http://localhost:8080/apex/ I get a 500 - Internal Server error with the info below.
***********ERROR*********** init: # headers=43 declare nm owa.vc_arr := ?; vl owa.vc_arr := ?; begin owa.init_cgi_env( ?, nm, vl ); htp.init; htp.HTBUF_LEN := 63; ? := sys_context('USERENV','SID'); end; SID:880 CALL: begin apex; commit; end; BINDS PAGE CALL: declare nlns number := 999999; l_clob CLOB; lines htp.htbuf_arr; l_buff varchar2(32767); l_clob_init boolean:= false; l_file varchar2(5); l_doc_info varchar2(1000); begin OWA.GET_PAGE(lines, nlns); if (nlns > 1) then for i in 1..nlns loop if ( length(lines(i)) > 0 ) then if ( ( lengthb(l_buff) + lengthb(lines(i))) > 32767) then if (NOT l_clob_init) then dbms_lob.createtemporary(l_clob, TRUE); dbms_lob.open(l_clob, dbms_lob.lob_readwrite); l_clob_init:=true; end if; dbms_lob.writeappend(l_clob,length(l_buff),l_buff); l_buff := lines(i); else l_buff := l_buff || lines(i); end if; end if; end loop; end if; if (l_clob_init) then
[code]....
View 4 Replies
View Related
Feb 24, 2011
How can I make my listener dynamic. What are all the parameters I need to change at pfile for the same.
View 1 Replies
View Related
Jan 4, 2011
I am using Oracle 11g. After rebooting the server listener and databases are not up and running but ASM is up.
How the listener and databases will be up?
I have entry in /etc/oratab file:
+ASM:/opt/grid/11.2.0/grid:N
IPDCDB2:/opt/oracle/product/11.2.0/db:Y
View 2 Replies
View Related
Sep 11, 2012
We are getting the below error messages in LISTENER LOG FILE. That too every 5 Mins.
10-SEP-2012 16:25:43 * (CONNECT_DATA=(SERVICE_NAME=dpm)(CID=(PROGRAM=W:Applicationdpm2010.exe)(HOST=ISSLDMUM01PC169)(USER=bharathi))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.80.100.39)(PORT=2241)) * establish * dpm * 0
10-SEP-2012 16:25:46 * service_update * DPM * 0
10-SEP-2012 16:25:47 * 12546
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
I am not getting the reason for it.
View 3 Replies
View Related
Dec 5, 2012
My listener.trc file has grown to a size of 56G and is contineously growing with the following message:
9:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:669] naeshow: [05-DEC-2012 19:56:49:670] naeshow: [05-DEC-2012
[code]...
View 1 Replies
View Related
Nov 22, 2006
while aim starting listener But Services in windows services showing listerner status as "started"
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=server1.NTS.rethi.com)(P
ORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
[code]....
View 7 Replies
View Related
Mar 22, 2010
One of our requirements is to secure the listener and other Oracle services by running them as a local OS account rather than as LocalSystem on the server.
I created a local OS account (assume it's named oracleuser), assigned it to the User and ORA_DBA groups on the server, and then I went to the Local Policies and added oracleuser to "Deny log on locally" and "Log on as a service".
I opened up the Services utility and stopped the four Oracle services we have running (OracleMTSRecoveryService, xxx_home1iSQL*Plus, xxx_home1TNSListener, and OracleServiceMYDB). I changed the "Log on as" for each service to oracleuser with its password (copied and pasted so I know there are no typo's), and restarted the services.
All the services except the listener started up. Attempting to start the listener caused the following error:
"The xxx_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service."
I tried rebooting the server and had the same result.For now just the listener service has been switched back to logging in as LocalSystem while the other services continue to use the local OS account and the database seems stable, but I do need to figure this out.
View 2 Replies
View Related
Jun 29, 2012
To one of my server i can see listener log are on normal location i.e. $ORACLE_HOME/network/log and on other server listener log is DIAG home. how to move listener log from ORACLE_HOME to DIAG_HOME.
oracle > lsnrctl status LISTENER
LSNRCTL for HPUX: Version 11.2.0.2.0 - Production on 29-JUN-2012 10:20:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.2.0 - Production
Start Date 03-MAY-2012 08:09:57
Uptime 57 days 0 hr. 10 min. 16 sec
[code]...
View 5 Replies
View Related
Sep 16, 2013
I am building a new Oracle Server. I have the following in the listener.ora file.
LISTENERProd =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=ORACLEPRODDB)(PORT=1555))
)
SID_LIST_LISTENERProd=
(SID_LIST=
(SID_DESC=
(SID_NAME=dg4odbc)
(ORACLE_HOME=c:Oracleproduct11.2.0dbhome_1)
[code]....
View 6 Replies
View Related
May 17, 2013
I am upgrading a DB using catupgrd.sql, and one of the prerequisites is to shut down the listener. Now, I have multiple database instances registered with this listener, and I don't want the other ones to become unavailable while I do the upgrade. Is there any way to do this for a particular instance only?
View 9 Replies
View Related
Nov 9, 2012
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 09-NOV-2012 19:55:06
Uptime 0 days 0 hr. 24 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:oracleproduct11.2.0dbhome_1
etworkadminlistener.ora
Listener Log File c:oraclediag nslsnrTESTQ51listeneralertlog.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NDCORCKSDQ51.global.loc)(PORT=1521)))
Services Summary...
Service "testdb" has 1 instance(s).
Instance "ksdtest", status READY, has 1 handler(s) for this service...
Service "testdbXDB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
The command completed successfully
i am trying to rename the logfile
"c:oraclediag nslsnrTESTQ51listeneralertlog.xml" to "c:oraclediag nslsnrTESTQ51listeneralert estdb.log"
so far i tried
LSNRCTL> set log_file testdb.log
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-01251: Cannot set trace/log directory under ADR
LSNRCTL>
View 3 Replies
View Related
May 22, 2012
On last Saturday we encountered error 'TNS-12519: TNS:no appropriate service handler found" in our listener log for some moment of time let say around 5mins and later it got all right itself.
View 3 Replies
View Related
Feb 4, 2011
I am having issue with configuring listner name on Oracle Server.My default listener is working,But I have stopped the default listener and tried to create another listener is differnt port,but no success,It always says The address of the specifed listener name is incorrect.Below is the listener.ora file
My db name and sid name are etl
LIST1=(DESCRIPTION=(ADDRESS=
(HOST=127.0.0.1)
(PROTOCOL=TCP)
(PORT=1530)
)
and the list1.log file says The address of the specified listener is incorrect.
View 12 Replies
View Related
Jun 13, 2010
I need to display the parameter and status of DB for listener and Read Only.
I know those value could be get from command line , but could we get the values of Listener and Read only by SQL/PlSQL? So I can get it through the query of DB.
View 8 Replies
View Related
Apr 12, 2013
Unable to connect to database getting below error
sqlplus sys/oracle@server_name/orcl
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 12 11:07:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12518: TNS:listener could not hand off client connection
Below is alertlog entry
Completed: alter database open
Thu Apr 04 17:06:19 2013
db_recovery_file_dest_size of 4096 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
[code]...
View 6 Replies
View Related