I need a query to display the office and count(*)
where rownum > 6 i.e
here is the data
office
------
hq
hq
hq
hq
hq
hq1
hq1
[code]....
I need a query to display the top 3 counts and the 4 row should be sum of count of other offices.
my result should look like this
office count(*)
--------- --------
hq 5
hq1 4
hq2 3
other 10
I have two tables emp , emp address as below
emp table :
emp_id emp_name,
1 rajesh
2 suresh
emp address table :
emp id emp_addresstype emp address
1 O kukatpally
1 H Hitech
2 O Kolkata
2 H hydar nagar
I need the query to display the Office address & House address & emp id in single query
ex: 1,Kukatally,hitech
2,kolkata,hydarnagr
I have the folloiwng two queries:
Query_1: select count(*) yy from table1;
Query_2: select count(*) zz from table2;
I need to compute the following:
var:=(yy/zz)*100
How can I achieve this in a single query?
I have to display count of employees that belongs to different categories.
is the situatio There is a category table CATEGORY with three columns (PK,NAME,TREEPOSITION) and we have categories A, B, C these three categories can further have sub-categories so the treeposition for the sub categories will be followed by their root category with _ 'symbol'
Now I have table for the employees with 3 columns (pk,name,category_id), where employees.category_id=category.pk So I want to calculate the number of employees in each category or sub-category.
since the number of categories will be large and each will be having different names so going through names will be bad option left is grouping through the treepostion
the problem is I cant use like using IN for the TREEPOSITION. .
TABLE EMPLOYEES ( PK,NAME,CATEGORY_ID)
TBALE CATEGORIES (PK,NAME,TREEPOSITION)
My problem is i need to display the status and the record count in separate rows.How can i do it
Example
SELECT 'A' STAT, COUNT(A) CNT,'B' STAT, COUNT(B) CNT,'C' STAT, COUNT(C) CNT
FROM TAB1;
OUTPUT SHUD BE LIKE
STAT COUNT
A A_cnt
B B_CNT
C C_CNT
Our application has a homepage that displays results of several SQL statements that are defined as reports. One report in particular should only display a custom message when Count of Invoices having a particular status > 0, and not the actual invoice count itself.
I have gotten the layout to not display the count but I need to be able to display a custom message that says "Problem Invoices exist. Please see Invoices Report for more information." I've looked over the Report Attributes definition page but I cannot find how to display this custom message.
I have this query and I want to get the COUNT:
SELECT first_np AS n_p FROM dvc
UNION
SELECT second_np AS n_p FROM dvc
UNION
SELECT n_p FROM dc;
This returns one column which is the n_p; how do I get the count of n_p?
I' m doing a query on multiple tables willing to get only top scorers from a certain round. Here's the relevant part of relation:
SOCCER_TEAM(TEAMID, NAME, CITY)
PLAYER (PLAYERID, NAME_SURNAME, DOB, TEAMID)
GAME_STATS(ROUNDID, GAMEID, TIME, PLAYERID, STATTYPE)
TIME is No between 1-90 representing the minute of the game
STATTYPE is IN('GOAL', 'OWN GOAL', 'RED', 'YELLOW')
Here's my sql code for the query:
SELECT ROUNDID, NAME_SURNAME, NAME, COUNT(STATTYPE)
FROM GAME_STATS, PLAYER, SOCCER_TEAM
WHERE PLAYER.PLAYERID IN (SELECT GAME_STATS.PLAYERID FROM GAME_STATS WHERE STATTYPE='GOAL' AND PLAYER.TEAMID = SOCCER_TEAM.TEAMID)
AND STATTYPE='GOAL'
AND GAME_STATS.PLAYERID = PLAYER.PLAYERID
GROUP BY ROUNDID, NAME_SURNAME, NAME
ORDER BY ROUNDID, COUNT(STATTYPE) DESC
This results in correctly displaying all scorers from all the rounds, yet I haven't been able to construct the HAVING clause to display ONLY the top scorers from each round (there can be multiple of them scoring equal top amount of goals and I need to show them all)
p.s. I have underlined primary keys, while foreign keys are in cursive, if it is of any relevance
from the below string i want to find the count of the "<-" using a single query.
string is "aaaa<-bbbb<-ccccc<-ddddd<-eeeeee<-ffffff<-"
If not the query, pointer on using SQL functions.
I need to modify my query so that it can give me a total(duration) and total(stlmntcharge) per day in april 2013 starting from the 1st till the 30th. At the moment my query looks like below:
SELECT sum(duration),sum(stlmntcharge)
FROM voipcdr
WHERE (calldate >= TO_DATE('20130401','YYYYMMDD') AND calldate <= TO_DATE('20130430','YYMMDD'))
AND (remtrunkid IN (SELECT UNIQUE trunkid FROM trunks WHERE description LIKE '%Telkom%' AND gw_range_id = '61' AND trunkid like '9%'))
or remip in(SELECT UNIQUE startip FROM gateways WHERE rangename LIKE 'vo-za%' OR rangename LIKE 'PC-IS-VOIS%')
AND direction = 'I'
ORDER BY calldate, calltime;
TASK_ID, TASK_STATUS, TASK_OWNER
================================
00001 , OPEN , ABC
00002 , OPEN , XYZ
00003 , WIP , ABC
00004 , CLOSED , XYZ
00005 , WIP , XYZ
00006 , CLOSED , XYZ
00007 , OPEN , XYZ
Output Required
Owner , Open , WIP, Closed
ABC 1 1 0
XYZ 2 1 2
i need the total of the count query I am executing.My query is
SELECT COUNT(*) FROM po_headers WHERE
CREATION_DATE BETWEEN '01-MAR-2010' and '31-MAR-2010' GROUP BY VENDOR_ID
this gives output as
6
1
3
4
My objective is to find the total of distinct vendors for a given date range.how should I modify this query.
I have a report I created and I need to get a Total Count by Plan Code Description for Each State. I do this and get all my data:
SELECT
mv.R1_State,
mv.subscriber_id,
mv.plan_code,
pm.description,
mv.line_of_business,
[code]...
But I cannot get the count I have to do a separate Query to get the count here it is How can I put the two together to get my count information and Report information together in one Report???
Select
Count(pm.description),
mv.R1_State
FROM windsoradm.member_mv mv
[code]....
How to count siblings in a hierarchical query? I'm trying to get a listing of employees
SELECT LEVEL, last_name||', '||first_name AS Manager, count(employee_id)
FROM employees
START WITH manager_id IS NULL
CONNECT BY PRIOR employee_id = manager_id
GROUP BY level
This returns 4 levels. I'm wanting to add up the number of siblings under the level 2 instead of listing them all.
l_query := 'SELECT sedol ' ||
'FROM integration.tmp_attributed_sedol ' ||
'WHERE ' || p_field || '=''' || p_ref_number || ''' ';
by using the execute immediate or any other command, how can i check whether the query returned any rows or not?
I have one table that have many records. For the maintenance purpose I like to delete old record based on Customer No.-That is Mobile NO.If each Customer have more than 300 records, I like to delete by everyday batch process.can't figure out how to apply each Customer No.(Specific Column), I could sort (order by few column - SAVE_DT or SMS_ARV_CLC) how to write this kind of query? I try rownum but no more progress.
Here is my table
CREATE TABLE TM_060_SMS_TEST
(
SMS_SEQ VARCHAR2(18 BYTE),
SMS_RCV_CLC VARCHAR2(14 BYTE),
CUST_NUM VARCHAR2(12 BYTE),
[code]...
I have a table which contains two columns containing the range of some products. These range are alphanumeric and i want to calculate the count of this range by a query. .
test case:
CREATE TABLE MARRIAGE_FILE_NAME
(
START_SERIAL_NO VARCHAR2(10 BYTE) NOT NULL,
END_SERIAL_NO VARCHAR2(10 BYTE) NOT NULL,
CATCODE VARCHAR2(10 BYTE) NOT NULL,
[code]....
I am Having below query which is having total 664 records and for WHERE Clause (accountno ='13987135') it is having 3 records but when i am taking count it is returning 3 at first time and again returning 4 every time from then onwords.
SELECT Count(*) cnt FROM(SELECT rownum rnum,
secno,
positionname,
tradingsymbol,
cusipcum,
businessclientname,
businessclientid,
[code].....
I like to increase speed to delete our table. Is it possible to use BULK COLLECT or FORALL this query? This is not single delete or select, maybe I got the error? Is it possible to use BULK method to this query?
delete from
TM_060_SFS_TEST
WHERE
rowid in (
SELECT
[code]......
Need a query to find the count of presence of delimiter "," in column VAL for below mentioned table.
Table:
CREATE TABLE N_B_S_1
(
NUM NUMBER,
VAL VARCHAR2(20)
)
Data:
INSERT INTO N_B_S_1 VALUES(1,'A,B,C');
INSERT INTO N_B_S_1 VALUES(2,'D');
INSERT INTO N_B_S_1 VALUES(3,'ER,NF,G,H,XK');
INSERT INTO N_B_S_1 VALUES(4,'LQW,MBV');
INSERT INTO N_B_S_1 VALUES(5,'KS,YJ,WE,RQ,PM');
COMMIT;
Required output:
num, count of delimiters
===== ===========
1 2
2 1
3 4
4 2
5 4
I want to know that whether we can write a query to add total number of count of each table.
for example:
select count(*) from emp;
count(*)
14
select count(*) from emp_1;
count(*)
15
select count(*) from emp_2;
count(*)
16
My question is that is it possible to add this all the three results and get the value as 45.
I want to count the batch records using BATCH_ID with CASE statement ,for that i am using below query but its not working ,
SELECT COUNT(*) FROM <TABLENAME> WHERE VNBATCH_ID=CASE WHEN #SDC <10 AND #PERIOD >=10 THEN
0||#SDC||#PERIOD||#BATCH_ID
WHEN #SDC <10 AND #PERIOD <10 THEN
0||#SDC||0||#PERIOD||#BATCH_ID
WHEN #SDC >=10 AND #PERIOD <10 THEN
#SDC||0||#PERIOD||#BATCH_ID
ELSE
#SDC||#PERIOD||#BATCH_ID
END
I am using an query to fetch the data from oracle DB and fill dataset using oledb dataadapter in ASP.net.When i run the same query in PL/SQL i am getting 14952 records,but when i am filling it to dataset i am getting only 13700 records.
View 2 Replies View RelatedI have a requirement where I want to display amount what I have billed to my client and then how I received my amounts from that Bill. For eg.lets say there is bill no 001 amounting 10000 and after some days I received a part payment cheque/cash from client worth 2000 then he gave second part 2000 and then finally I received 2000. Still 4000 is remaining to be received.So in tabular format I want to display data which will have 3 records of 2000 and one record of balance 4000.
In attached file i have given few examples, where highlighted area is what i want to derive. There are formula's in Collection date, delay by and Int calc. Basically highlighted lines are the ones which should be shown in query result. And data shown above that is what i have right now.
I have 2 tables, ASSIGNMENT and RESEARCH_PAPER. For each research paper, I need to find out :
1. The number of assignments created from it (after a given constant assign date)
2. The number of assignments created from it that have been approved.
3. The number of unique users who have either created or approved an assignment from it
Test data :
create table research_paper (id int, name varchar2(100));
create table assignment (id int, r_paper_id int, assigner_id int, assignee_id int,
approver_id int, assign_date timestamp, approved_yn varchar2(10));
insert into research_paper values (1, 'A');
insert into research_paper values (2, 'B');
[code]....
Assignment :
id r_paper_id assigner_id assignee_id approver_id assign_date approved_yn
-----------------------------------------------------------------------------------------------------------
11 100 200 100 23-10-12 12:00:00.000000000 AMY
22 200 100 200 22-10-12 12:00:00.000000000 AMN
32 100 200 101 24-10-12 12:00:00.000000000 AMY
[code]....
Research_paper:
id name
----------
1A
2B
Expected result :
r_paper_id created approved unique_users
-----------------------------------------------
1 3 2 4
2 3 2 3
I wrote the following query for that :
SELECT rp.id r_paper_id,
COUNT(*) created,
COUNT(
CASE
WHEN a.approved_yn = 'Y'
[code]....
But it fails, saying that 'single-row subquery returns more than one row' when I introduce the 'unique_users' clause. The remaining fields of the output are correct.
When i had a interview last week they ask me to write a query to display the next ten dates using sql query ( without using PL/SQL).
View 11 Replies View RelatedI download a pdf file,but I want to use it in the office word,who knows how to convert it?
View 11 Replies View RelatedI am trying to read/write Open Office scalc.exe(which is replacement of Excel file) file using DDE Package as like Excel File. But it is giving me non oracle Exception Error when it focused or initiate.
View 2 Replies View RelatedI need to write a query to sort the records in a particular order,
Say if I group the records by Dept number
Dept no Name
10A
10G
10f
20B
20K
30I
30M
30R
30Y
I need to write a query that will make this records listed like
Dept No Name
10A
20B
30I
10G
20K
30M
10F
20null
30R
10null
20null
30Y
the scott.emp table has 14 employee records. I want to display like this in a select query .
ename ename ename
-------- -------- --------
adams abc def
scott xyz pal
smith hij efg
------ -------- -------
page1 page2 page3
and another 5 records
ename ename
-------- --------
asd rty
afg uio
wrt no name
------- ---------
page4 page5