For my task I tried to write a package that has sys_refcursor in it.It compiled well.Now I want to see the results of it and wrote a anonymous block which gave errors.
CREATE OR REPLACE
PACKAGE xyz
IS
[Code]....
Error:Invalid reference to variable 'OBJ_CUR'.
I am trying to run the following script but some how i am getting message: anonymous block completed. where i am doing wrong and also how can i display the values with their column names.
set serveroutput on size 1000000
Declare
v_pr_nbr document.document_nbr%type:= ' ' ;
cursor c1 is
[code]...
I'm having an issue with an Oracle ref_cursor, how to call the cursor within an anomimous Pl/Sql Block. I did it once but I can't get it working now.
DECLARE
v_cursor sys_refcursor;
t_cursor v_cursor%rowtype;
BEGIN
OPEN v_cursor FOR
[code].....
I made this script but I still don't quite understand if the syntax is correct. I just wanted to create a function and call it in an anonymous block. I then wanted it to use a variable as a parameter in an iteration and output the variable every iteration. It's done basically but I know it's not 100% right. The fibonacci function looks like its going to loop an infinite number of times if the parameter is greater than 2.
CREATE OR REPLACE PACKAGE myPACKAGE AS
CREATE OR REPLACE FUNCTION fibonacci
(n BINARY_DOUBLE) RETURN BINARY_DOUBLE IS
BEGIN
IF n <= 2 THEN
RETURN 1;
[code]........
Is it possible to create autonomous transaction in anonymous block.
find the below code, when I am trying to execute I am getting error
CREATE TABLE EMP (EMPNO NUMBER(4) NOT NULL,
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7, 2),
[code].....
One of our developers team member had created a Anonymous block program to do something in the Database, and he forgotten and terminated the session without confirming the program's status, whether it was fully ran or not.
Is there any way to check out the status of this, which happened yesterday?
The following query gives me 28,800 as sum(sal)
SELECT SUM(salary)
FROM employees
WHERE department_id =60
O/P is : 28800But when i use the above query in anonymous block it gives me 684400
DECLARE
v_sum_sal NUMBER;
[code]....
The above output statements gives me 684400 as output.. But the expected is 28800
can we place insert statement in loop inside anonymous block?
CREATE TABLE DEP(DEPTID NUMBER(5) NOT NULL PRIMARY KEY,DNAME VARCHAR2(10),LOCID VARCHAR2(10));
DECLARE
I NUMBER(5);
BEGIN
I := 0;
LOOP
INSERT INTO DEP VALUES(&DEPTID,'&DNAME',&LOCID);
I := I+1;
EXIT WHEN I = 5;
END LOOP;
END;
i have an error with block corruption
Error: Corrupt block relative dba: 0x01c12a58 (file 7, block 76376)
What all the ,methods I can go for if we are working on a production environment with out any down time.
I can go for dbms repair package and restore and recover
i found this difference between ref cursor and sys_refcursor.
If you specify return_type, then the REF CURSOR type and cursor variables of that type are strong; if not, they are weak. SYS_REFCURSOR and cursor variables of that type are weak.
my situation is i have to write many stored procedure for reports and also for entery pages. few enter pages use typed datasets and few does not.
which one is better in terms of performance and maintainability in above three conditions?
using dbms_profiler for a package having procedure returning sys_refcursor.
I have 2 procedure in a package. let say, proc1 and proc2 ( also proc1 is called inside from proc2)
proc1 has no parameter
proc2 has 2 paramter proc2(p_num in integer, p_data out sys_refcursor) [ in which we pass the p_num (ex: 1) and it run to get the data from the tab le and return that data through sys_refcursor.
for proc1, I am able to use dbms_profiler as below and it is working fine
-------------
DECLARE
l_res BINARY_INTEGER;
BEGIN
l_res := DBMS_PROFILER.start_profiler(run_comment => 'package.proc1: ' || SYSDATE);
package.proc1;
l_res := DBMS_PROFILER.stop_profiler;
END;
/
-------------
but for proc2, i am unable to use dbms_profiler, how to use dbms_profiler for procedure returning sys_refcursor.
i tried using as below:
-------------------------------
DECLARE
l_res BINARY_INTEGER;
P_NUM NUMBER;
P_DATA SYS_REFCURSOR;
[code]....
getting error: PLS-00312: a positional parameter association may not follow a named association
i have created a procedure to open a query using a reference sys_refcursor as output parameter. i referenced the cursor in a pl/sql and is working correctly. however it throws error "ORA-01001: invalid cursor ORA-01403: no data found" when use on the oracle forms builder.
create or replace procedure mrch.prc_proj_list (p_add_clause in varchar2, p_rec_set out sys_refcursor) as
begin
Open p_rec_set for
'Select mp2.REGION region, '||
' mp2.ID proj_id, '||
' mppm2.PHASE phase, '||
' mm2.muni muni_id, '||
' mm2.MUNINAME muni_name, '||
' nvl((select Sum(ma.AMOUNT) From MRCH.MRC_AGREEMENT ma '||
' Where ma.PROJECT_ID = mp2.ID '||
' And ma.PHASE = mppm2.phase '||
' And ma.MUNI = mm2.MUNI),0) agreement, '||
' nvl((Select Sum(NVL(ma.GREEN_BOOK_AMOUNT,0) + NVL(ma.GB_ADJUST,0)) From MRCH.MRC_ALLOCATION ma '||
[code]....
i have a procedure which outputs 10 refcursors. It is called called by a .NET utility which then writes the data to 18 different flat files. The proc is of below format
CREATE OR REPLACE PROCEDURE FILE_EXTRACT
(OUTREC1 OUT SYS_REFCURSOR,
OUTREC2 OUT SYS_REFCURSOR,)
AS
BEGIN
OPEN OUTREC1 FOR
SELECT /*+PARALLEL(A,8)*/
COL1,COL2
FROM TABLE A;
[code]....
I have used parallel hint because all the tables used in the queries a huge tables and this is a nightly batch job. The issue here is that i have expected oracle to use 8 processes for this execution so all my select statements have parallel hint with degree 8 , but unusaully the procedure is erroring out on production databases because of maximum number of connections are being spawned and the database is not able to create any new session. When i debuged and did a quick test proc where i used only one out refcursor it ran only 9 threads . then i ran by adding one more out ref cursor it spawn 17 threads. I think its the way .NET is fetching data from each of these cursors.When i print the first refcursor i do see queries which are running for the second along with the first causing the parallel queries run more than expected. The cause of the problem here is all the refcursors are executed and waiting to return data. SO when .net starts reading first cursor the other queries also run.
I'm trying to build a dynamic sql inside an Oracle procedure, and return it as a SYS_REFCURSOR to ADO.NET using ODP.NET in Oracle 11R2. Below is my table:
CREATE TABLE "TFWDB_ENTIDADE"
(
"CD_ENTIDADE" NUMBER(10,0) NOT NULL,
"DC_ENTIDADE" VARCHAR2(100 BYTE) NOT NULL,
"NM_ENTIDADE" VARCHAR2(255 BYTE) NOT NULL,
"CD_TIPO" NUMBER(5,0) NOT NULL,
"ID_STATUS" CHAR(1 BYTE) DEFAULT ('1') NOT NULL,
CONSTRAINT "PKFWDB_ENTIDADE" PRIMARY KEY ("CD_ENTIDADE"),
CONSTRAINT "CHFWDB_ENTIDADE" CHECK (ID_STATUS IN ('0', '1'))
);
Below is the procedure I build to SELECT it:
create or replace procedure spfwdb_sl_entidade_1(
p_cd_entidade in number,
p_dc_entidade in varchar2,
p_nm_entidade in varchar2,
p_cd_tipo in number,
p_id_status in char,
[code]........
I'm calling this code from C#, and I get an empty Result Set. What am I doing wrong? Can I output the dynamic sys_refcursor that I created? Below is my C# code using ODP.NET:
string pConnectionString = "Data Source=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ORASERVER)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=ORASID)));User Id=user;Password=password;";
OracleConnection oConn = new OracleConnection(pConnectionString);
oConn.Open();
string pNomeProc = "spfwdb_sl_entidade_1";
[code]........
I trying to write plsql anonymous block to return the name of all the employees who belongs to a specific department . I am writing below script for this and getting the error where as the same logic if i use only in a function instead of creating it within a procedure , i am not getting any error .
Script :
DECLARE
TYPE EMPARRAY is VARRAY(20) OF VARCHAR2(30);
FUNCTION getEmpArray (p_no IN NUMBER)
RETURN EMPARRAY
AS
[code].......
Error report:
ORA-06550: line 18, column 4:
PLS-00103: Encountered the symbol "end-of-file"
when expecting one of the following:
begin function package pragma procedure form
06550. 00000 - "line %s, column %s:
%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
I have a written a script which doesnt take any parameter. this is an anonymous block. I run my script as below: SQL> @filename.sql
I would like to convert this into a procedure which should be called in an anonymous block. run a procedure from an anonymous block.
I would also like to know how to run the same from the SQL prompt.
How to send email in HTML format as an attachment/email body by executing oracle anonymous procedure
View 1 Replies View RelatedWe have OEM and within are some great metrics and dashboards, with key information.We want to post some of these dashboards and metrics on our wiki page and/or within our application dashboards (we use jaspersoft.com/)
We do not want to give our normal users the access into OEM, so is there a way to somehow export these dashboards or access them via an anonymous user somehow?Either the dashboards themselves would be great, or somewhere to export the data the dashboards user - as i can then create the dashboards myself using the data.
example of dashboards/info to use would be:
- General, Host CPU, Active Sessions, SQL Response Time, Space Summary, etc...
I am facing some problems in recovery on oracle 9.2.0.1.0 Standard Edition.
Quote:
ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 43200 change 1021681146 time 10/11/2012 18:25:25
ORA-00334: archived log: '/oradb/odb/archivedata/ARCH0000002343.ARC'
I am trying to create a datablock based on a procedure , but im getting errors in compilation:
Errors are :
1) identifier 'HSM_WSH_DEL_UTIL.DEL_TBL' must be declared
2) PL/SQL ERROR 320 at line 7, column 27 the declaration of the type of this expression is incomplete or malformed
Heres my pkg spec and body for the data block:
CREATE OR REPLACE PACKAGE hsm_wsh_del_util
IS
TYPE del_record IS RECORD (delivery_id NUMBER);
TYPE del_tbl IS TABLE OF del_record
INDEX BY BINARY_INTEGER;
PROCEDURE do_query (p_del IN OUT del_tbl);
END hsm_wsh_del_util;
[Code] .....
We are working on migrating from 9.2.0.4 to 11.2 and we've set up a test machine so that we could test the install and the import (as well as test additional 11g features that we want to begin using).
So we created the database and created all of the tablespaces beforehand.
Our import command is
$ORACLE_HOME/bin/imp system/manager FULL=Y BUFFER=140000 FILE=/dbexport/Lhtech.exp VOLSIZE=2000M GRANTS=Y INDEXES=Y COMMIT=Y IGNORE=Y
However, when we run the import, we get the errors like so:
Import: Release 11.2.0.1.0 - Production on Tue Oct 5 15:01:19 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V09.02.00 via conventional path
[code]....
First of all, the block size in our "newly" created tablespaces is 8192...and these are obviously trying to recreate the tablespaces with a block size of 2048.
1) Why is it not ignoring these create tablespace commands when those tablespaces already exist?
2) how in the world do we get around the block size issue? We've tried nearly everything we could find, but we've still not had any luck.
During the scheduled backup we observed that, backup got failed. Error is "ORA-01115: IO error reading block from file 11 (block # 118736)
".
unable to rectify it. Below are the part of log file -
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.MAIN [TABLE_DATA:"DW_REP"."DW_MOTOR_CLAIM_INFO_DTLS"]
ORA-24795: Illegal ROLLBACK attempt made
ORA-06512: at "SYS.KUPW$WORKER", line 8976
ORA-24795: Illegal ROLLBACK attempt made
[code]...
This is development server. Dont have RMAN configured.But when we connected to RMAN and issued block recovery, it started process and shows media recovery done. Since no RMAN backup was taken before, what it does here?
C:UsersAdministrator>RMAN
Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 17 10:48:40 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> CONECT target /
connected to target database: MAGMADEV (DBID=2469200049)
[code]...
how to resolve this problem?
When i was starting my database .there was an error
ora-00333:redo log read error block 203 count 8192.
Error is occurred during the transaction...i.e.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
ora-00000 normal successful completion error while populating data from Master block to Detail block in Oracle Forms 11g.
View 6 Replies View RelatedI'm having a problem with the When-timer-Expired trigger.I am creating a timer on the On-Error trigger of the block. in the when-timer-expired :
message (11); exit_form(no_validate);
If i run the program program for the first time,message 11 doesn't show thus it doesn't fire the when-timer-expired trigger. But if i logout from application server and enter all over again,the when-timer-expired works !
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0
20 , 95 , 0
30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196
20 , 95 , 95
30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
I am running the stand alone pl/sql block. it opens the for cursor and the updating the table. select value in the cursor having 3 lack records. the server output is returning junk values. Why i am getting this junk value here.
below is the format:
SET SERVEROUTPUT ON
BEGIN
FOR cursor name select
LOOP
UPDATE table_name
END LOOP;
[code].....
