CREATE OR REPLACE PACKAGE pkg_mkt_hub_load_collection
AS
PROCEDURE sp_final_load_mkt_hub;
END pkg_mkt_hub_load_collection;
/
CREATE OR REPLACE PACKAGE BODY pkg_mkt_hub_load_collection
AS
[code]....
error : 30/44 PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list
when i removed bulk collect from fetch commands, it works fine.
I have a requirement to send a table data through mail, so am using procedure inside which am using execute statement after opening the connection and am using the following PLSQL code, which am failing to execute successfully.
My code goes like this.
0 10 20 30 40 50
1 CREATE OR REPLACE PROCEDURE SEND_TABLE_DATA( FROMAD IN VARCHAR2,
2 TOAD IN VARCHAR2,
3 SUBJECT IN VARCHAR2,
4 MESSAGE IN VARCHAR2,
5 DOCID IN VARCHAR2,
6 DOCDT IN DATE,
7 PRODOAID IN NUMBER )
[code].....
I am using forms 10g...
I have 2 blocks,in one i insert student_id and when i click on the button i should get all his courses in the other block...
BUT.. when the student has more than 1 course I get this:
when button pressed trigger raised unhandled exception ORA-01422
Here is the button
begin
select TEST_STUDENT_INFO.stud_name,TEST_STUD_CRSE_DETAIL.crse_no,
TEST_COURSES.crse_name,TEST_STUD_CRSE_DETAIL.crse_type,TEST_STUD_CRSE_DETAIL.crse_type_desc,
TEST_COURSES.crse_time
INTO :stud_name,:crse_no1,:crse_name,:crse_type1,:crse_type_desc1,:crse_time
from TEST_STUDENT_INFO,TEST_COURSES,TEST_STUD_CRSE_DETAIL
where (TEST_STUD_CRSE_DETAIL.STUD_ID =:TEST_STUD_CRSE_REG.STUD_ID)
and (TEST_STUDENT_INFO.STUD_ID =:TEST_STUD_CRSE_REG.STUD_ID)
and (TEST_COURSES.CRSE_NO = TEST_STUD_CRSE_DETAIL.CRSE_NO)
and (TEST_STUD_CRSE_DETAIL.CRSE_TYPE = TEST_COURSES.CRSE_TYPE);
end;
but if the student has ONLY ONE course it WORKS FINE!
Earlier i used select list item type with single select values so, According to my requirement in where clause i have written the condition like this
NVL(publish_id, :P91_PUBLISH_ID) = NVL(:P91_PUBLISH_ID,publish_id)
but my requirement is multi selection. How could i write same condition for multi selection.
write the same condtion for multi selection.
Consider below is a multi record block rows, i want to hide "23". Is it possible using Set_Item_Instance_Property or any other built-in is there in oracle forms to hide a single row field in a multi record block.
11 12 13
21 22 23
31 32 33
. . .
The main qn is in the subject line.
I have used the following code
GO_BLOCK('CHILD_BLK');
FIRST_RECORD;
LOOP
IF NVL(:CHILD_BLK.SELECT_FLAG,'N')='Y' THEN
V_REC_NO := GET_BLOCK_PROPERTY('CHILD_BLK',CURRENT_RECORD);
SET_ITEM_INSTANCE_PROPERTY('CHILD_BLK.ASSET_DESC',
V_REC_NO,
[code]....
We've been administering a multiple instance production dB server with 3 different versions of Oracle installed.Currently, each of Oracle version had corresponding listener.Oracle 9i had 2 instances, 10g 6 instances & 11g 2 instances also.how I can integrate this 3 listeners into 1.
View 2 Replies View RelatedI have a Page containing 3 reports and I was wondering if it is possible to re-execute only one of the these reports using a button or preferably a Select List which allows me to choose which of the 3 reports I wish to 'refresh/re-execute'. I may be totally wrong here but I assumed that choosing the option to submit a Page will cause all regions to refresh i.e. re-execute the SQL queries they are 'based on'.
View 6 Replies View Relatedhow do we know database character set is either single character set or multi character set?
While changing character-set from AL32UTF8 to WE8MSWIN1252 got "ORA-12712: new character set must be a superset of old character set".
Below are steps taken to resolve the issue -
ALTER DATABASE CHARACTER SET WE8MSWIN1252;
i got this error: ORA-12712: new character set must be a superset of old character set
below are the commands executed by me:
SQL> SHUTDOWN IMMEDIATE;
SQL> CONNECT SYS/password AS SYSDBA;
SQL> STARTUP MOUNT;
SQL> ALTER SYSTEM ENABLE RESTRICTED SESSION;
SQL> ALTER DATABASE OPEN;
SQL> ALTER DATABASE CHARACTER SET INTERNAL_USE WE8MSWIN1252;
SQL> SHUTDOWN;
SQL> STARTUP;
SQL> QUIT;
And its working...
I have not done it in proper order. Neither have done ccsscan. Still, no user reported any issues. Do my changes truncated the data?
I have an script.sql that receives as a parameter an string.
example:
@C:/myscript.sql "o'connor"
user_account_value varchar2(120) := '&1';
EXECUTE IMMEDIATE "Select * from Table where column = :1 " USING user_account_value I am not sure how to deal with string that contains single quotes.
If the parameter were passed as : "o''connor" this will work
If the parameter is pass as: "o'connor" this will not work.
so my question is what options do I have to deal with dynamic queries and single quotes.
I tried replacing replace(myParameter,'''',''''''); but not working well.
what is the error in this procedure.I am getting error where s.msg_id = Tbl_Repo_Salo (i.msg_id));
Create or replace Procedure Proc_Stg_Clear(P_Err_Code OUT NOCOPY number,
P_err_msg OUT NOCOPY varchar2) as
v_count number;
Type Repo_Salo is table of Tbl_Tml_msg_Salo_Stg%ROWTYPE;
Type Repo_Smb is table of Tbl_Tml_msg_SMB_Stg%ROWTYPE;
[code]...
What is Bulk COllect and How it can be use
View 2 Replies View RelatedI made two runs for bulk insertion
In first run, 16,36,897 were inserted successfully in around 38 seconds.But in second run, 54,62,952 records had to be inserted, but process failed after 708 seconds with following error :
Error report:
ORA-04030: out of process memory when trying to allocate 980248 bytes (PLS non-lib hp,DARWIN)
ORA-06512: at line 21
04030. 00000 - "out of process memory when trying to allocate %s bytes (%s,%s)"
*Cause: Operating system process private memory has been exhausted
*Action:
Here is my code snippet :
.......
FORALL i in products_tab.first .. products_tab.last
INSERT INTO tab1 VALUES products_tab(i);
COMMIT;
.........
I think that there should not have been any problem in getting it completed successfully.
I have performance issue with the bulk update. I have 2 tables one with 21 millions of data and the other table with 2 millions of data.here the requirement is to update the table which is having 21 millions with the other tables data(which is having 2 million records) based on some matching criteria.
The procedure is taking 9 hours to update the table(which is having 21 millions data). I have created required indexes on table also.But the performance is not good.
Here my procedure:
CREATE OR REPLACE PROCEDURE AHM_GKPR.CLAIMS_WITHOUT_PARTITIONS
IS
TYPE T_PL_CO IS TABLE OF VARCHAR2(3) INDEX BY BINARY_INTEGER;
L_PL_CO T_PL_CO;
TYPE T_PL_CD IS TABLE OF VARCHAR2(9) INDEX BY BINARY_INTEGER;
L_PL_CD T_PL_CD;
TYPE T_PL_NB IS TABLE OF VARCHAR2(10) INDEX BY BINARY_INTEGER;
L_PL_NB T_PL_NB;
TYPE T_SE_CD IS TABLE OF VARCHAR2(1) INDEX BY BINARY_INTEGER;
L_SE_CD T_SE_CD;
TYPE T_BIR_DT IS TABLE OF DATE INDEX BY BINARY_INTEGER;
[code].........
I have a driver table from which I need to update another table while, at the same time, record the fact that I have processed each record on the driver table.
The driver table will contain around 3.5 million records, therefore I intended to handle this using some bulk collections, with a LIMIT option so that I don't hit any memory problems.
I would also prefer to commit in batches, or at least handle exceptions using the SAVE EXCEPTION clause. The problem is I seem to be running into an error when trying to make the update to the driver table (the commented out code). With this in, I get the error:
ORA-01410: invalid ROWID
ORA-06512: at "CUST_MAIL_UPDATE", line 217
ORA-06512: at line 38
Can the CURRENT OF not work with the FORALL? What is my best approach here? If I use a FOR LOOP I lose my SAVE EXCEPTIONS exception handling.
The Procedure is as follows:
-- declare some object structures to hold the retrieved data
TYPE driver_rec IS RECORD (
account_no ext_driver.account_no%TYPE,
update_action ext_driver.update_action%TYPE,
customers_rowid ext_driver.customers_rowid%TYPE);
TYPE driver_recs_tt IS TABLE OF driver_rec;
-- cursor to get the records from the driver table
[code].......
Is it possible to Bulk Upload file into Oracle table's BLOB column using Pl/Sql code.
The process I know of dose 1 file @ a time as of now.
I have more than 10000+ files to upload and this will be one off process.
We have requirement to create INSERT SCRIPT from the table having thousands of records and load that into flat file. if there are any better option other than using UTL_FILE package which process record by record.
View 5 Replies View RelatedI am finishing using procedure migration from HP-ux server to Oracle linux server. I am currently testing migration by procedure, and there's time limit, so I like to use bulk collect and other faster way to do that, however I could convert normal procedure to bulk procedure.
here's my script of old table, new table, normal procedure, and my new procedure.which parts can be corrected to use bulk collect or bulk insert?
CREATE TABLE ORAASFS.NATELIST
(
MINNO VARCHAR2(12 BYTE),
PHONENO VARCHAR2(12 BYTE)
)
CREATE TABLE ORAASFS.TM_SFS_USR_NATE_LST_01
(
[code]......
I simulated a sample procedure for my requirement.When i try to compile procedure it throws error 'cannot mix single and multiple rows ( bulk) into'...I have to pass a table as dynamic in a cursor ,collect the data and process it using and forall.
create table dynamic (emp_name varchar2(20),emp_id varchar2(20), tel_no varchar2(20);
create table dynamic_1 (emp_name_1 varchar2(20),emp_id_1 varchar2(20), tel_no_1 varchar2(20);
insert into dynamic values ('Mike','1','123456');
insert into dynamic values ('Nike','2','1234567');
create or replace PROCEDURE proc_1(t_name varchar2) IS
TYPE parent_rec IS RECORD (part_num dynamic.emp_name%type,part_name dynamic.emp_id%type,part_id dynamic.tel_no%type) ;
p_rec parent_rec;
rec_array SYS_REFCURSOR;
BEGIN
OPEN rec_array FOR 'select EMP_NAME, EMP_ID,TEL_NO FROM '||t_name ||' WHERE EMP_ID = ''1''' ;
[code]....
I'm getting error message
PLS-00386: type mismatch found at 'RECORD_VARRAY' between FETCH cursor and INTO variables
while executing the below code.
PROCEDURE MAIN_BULK_COLLECT(P_STARTDATE IN TIMESTAMP DEFAULT NULL,
P_ENDDATE IN TIMESTAMP DEFAULT NULL,
P_ROW_COUNT IN NUMBER DEFAULT 1000,
O_RECORD_VARRAY OUT NOCOPY SSAM_VARRAY_TYPE,
P_ERROR OUT VARCHAR2) AS
[code]....
I'm able to run the program successfully using FOR LOOP instead of BULK COLLECT but wish to run using bulk collect.
Okay I am not asking for detailed solution here but I have quick query.
One of the procedure have this cursor query returning say 10 columns and have declared an collection of that cursor type.
Now the cursor is bulk fetched in the collection.
By any means it is possible to happen that bulk collection will scramble column values ?
The cursor seem to return expected output. But when table insert happens using the collection there I see values are mismatched.
I was wondering if bulk collect can be an issue ?
We are doing a bulk select and insert (10,000 rows processed in each transaction). If one record fails, the entire transaction is rolled out. We need to fix this and re-run. the process is repeated unless all errors are fixed.
How to capture all errors in a single run ?
I have the following questions you can create a bulk collect in which he has 3 fields and one of them is a type collect failing index or other bulk collect?.If so, how would the procedure for when to insert the first record sub fill the bulk collect. being for example something like this:
-----------------------------------------------------------------
index | codigo | nombre | telefono
| | |-----------------------
| index | telefono
-----------------------------------------------------------------
| | | |
[code]...
How to resolve this issue?
CREATE OR REPLACE PROCEDURE fast_proc
IS
TYPE ARRAY IS TABLE OF mkt_total_lvl_indx_dly_stg%ROWTYPE;
l_data ARRAY;
cursor C IS
SELECT *
[code]..........
show error
Error code
PROCEDURE fast_proc compiled
Warning: execution completed with warning
17/47 PL/SQL: ORA-03001: unimplemented feature
17/5 PL/SQL: SQL Statement ignored
create or replace PROCEDURE CDR_PROC_ARCHIVE_ORDER_EXTRACT
IS
/*
Criteria to be followed to Order Archival
* Order Status should be 'Cancelled' or 'Complete'
* Order Closed date should be 6 months before
*
-- main Cursor to spool the Orders to be archived based on criteria
[code]...
I am trying to write an update using two tables, one table contains the list of updates to be applied, and the second contains the old data. I have a working solution but I was wondering if there might be some other better way to accomplish this task.
CREATE TABLE foo
(
foo_id NUMBER,
foo_val NUMBER
);
CREATE TABLE foo_change
(
foo_id NUMBER,
foo_val NUMBER
[code]...
The update works, but I thought there may be a better way I just don't know about.
identify what type of error is present in below procedure?
create or replace procedure test_bulk_load_type
as
type c1_owner is table of bulk_load_all_object.owner%type
index by binary_interger;
v_owner c1_owner;
[Code]....
I am trying for a solution to automate a process of bulk inserts. I have attached the script file.
Attached File(s)
blk_test_script.txt ( 1.45K )
Number of downloads: 6
why bulk insert is not possible in a table which has index?
View 9 Replies View RelatedI want to know which is the most efficient insert method among the followiing
1)using the hint append
or
2)bulk collect. Preferably I'd like to know which method of inserting for say 2-5 millions rows is the best.