Is it possible to Bulk Upload file into Oracle table's BLOB column using Pl/Sql code.
The process I know of dose 1 file @ a time as of now.
I have more than 10000+ files to upload and this will be one off process.
I am attempting to Insert an image "C:/hi.jpg" into oracle10g with BLOB using SQLPlus.
I have created a table IMAGES...
CREATE TABLE IMAGES (
ID NUMBER(4) PRIMARY KEY,
IMAGE BLOB
);
Is that a correct way to start? How would you upload the image onto the table?
I needed to create a page on my existing APEX application that would allow the user to upload a file, I followed an online tutorial where the user had created a dummy table and inserted CSV File inserted through APEX into the table. Following that simple example I am able to load the simple CSV file (from tutorial) into a dummy table (from tutorial) but when I attempt to insert actual/dummy data into my actual database (which has a lot more fields of different types), using the exact same process, I am unable to do so.
Ironically, I am unable to insert even dummy values despite the fact that I have been able to insert the same dummy values using SQL Developer. Icing on the cake is that APEX does not produce any error, this lack of debugging feature (especially line by line debugging) is such a pain. Just to add, I can load the values into an Array and can successfully print the delimited values off the array but am still unable to insert the same values into my table. Here is the table that I am attempting to insert into (actual names replaced by Dummyxx):
CREATE TABLE "TABLE"."STG" (
"DUMMY01" NUMBER,
"DUMMY02" NUMBER,
"DUMMY03" NUMBER,
"DUMMY04" DATE,
"DUMMY05" CHAR(3 BYTE),
[code].........
And here's the insertion process:
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
[code]..........
If I run a process to produce the output of the data array onto the screen, the values displayed are in the pattern desired.
Inserting Dummy values instead of values from the Array (v_data_array) to test
EXECUTE IMMEDIATE 'insert into TABLE.STG (DUMMY01, DUMMY02 ..... DUMMY65)
VALUES (
60040,
5,
TO_DATE("14-Dec-12","DD-MON-RRRR HH:MI:SS"),
"ABC",
"ABC",
60,
"11DEC1201",
"331",
"SCOTT TIGER",
"MARKETING",
[code].......
Note that all the the CSV does not contain all the fields, the CSV files that are expected to be entered into the system contain 65 Fields whereas the Table has 73 Fields. Also note that the process runs fine through SQL loader that is invoked through a different server which I need to release and hence the attempt to load the table this way. Also, the procedure on the SQL Loader server is quite complex and involved JAVA+Unix Shell Scripts etc. which I would prefer to avoid.
In my project, I implement file's upload and download function by "BLOB Support in Forms and Reports" of official development document Advanced Programming Techniques When user click the BLOB column to download file, I want to trigger an action to update one table for counting this file is downloaded one more times. But I can not find any "dynamic action" about this Blob column of Report.
View 1 Replies View Relatedi'm working with oracle 9i database fo my project. my questions are :
1)can we upload ms excel (.xsl) to oracle table. if yes, is it direct upload or we have to change it to .csv or other format ?
2)what are the tools to upload ms excel to oracle 9i?
I need to upload data from XML file to oracle database table.For this I have referred some websites in which solutions given in a such a way that loading entire XML file into LOB column inside the table.But I want only data to be extracted from XML file.
Will SQL Loader be best option?
oracle forms 6i
oracle ebs 11.5.10
database 9i
i create new custom application in my ebs 11i and i want to upload file in our custom application and save it as file system in my server lunix
how i attach my file and i want to save it not as blob but just upload to my server and after download it?
i want to upload a word file to database.I wrote the following code
create or replace directory MY_FILES as 'C:Uploadfolder';
Create table emp1(
EMPNO number(30),
EMPNAMe varchar2(10),
RESUME BLOB);
[Code]....
ERROR at line 1: ORA-22288: file or LOB operation FILEOPEN failed No such file or directory ORA-06512: at "SYS.DBMS_LOB", line 523 ORA-06512: at line 10
is it possible to upload very large files in oracle's tables. For example 1-2 gigabyte video file or even more. In other words is it possible to use oracle as file server to upload very large files and store them?
View 2 Replies View RelatedIam working with a form thru which I need to port nearly 7 laks of data into table. Earlier I had created a form thru which I read the data from the text file and inserting into the table. This was taking lot of time and as well after an hour or so, after porting 50k rows the program got terminated and shows an error like Network Inturpted.
So I have decided to use some other option and found that I can use either SQL Loader or external Tables. I had choosed SQL loader option and created a form along with a control file and batch file based on some forum posting.
Control File
LOAD DATA
INFILE 'D:SethuPayClock DumpCLK_050611clock_dump.txt'
INTO TABLE ARS_CLOCK_DUMP
(TDATE POSITION(01:08) DATE 'YYYYMMDD',
VER POSITION(09:10) CHAR,
EMPNO POSITION(11:15) CHAR,
TTIME POSITION(16:19) CHAR,
BRADD POSITION(21:22) CHAR
)
[code]....
With above all the form works perfectly in local system which is the development evironment and also client PC. And I was able to port those 7 laks rows in 3 miniutes. Now the real problem, If I need to move this to live application server, I had to move three files [ FMB, CTL and BAT ]. I have some problems in moving the other two files to the application server [ waiting for approval from bozz ]. And more over, I had to hard code the user id and password in the BAT file, i think which may not be a best practice and also not safe.
So I have decieded to do all from forms and found same sort of script. I took it and modified to my needs.Code from form's when button pressed which is not working
declare
usid varchar2(10):= get_application_property(username);
pwd varchar2(10):= get_application_property(password);
db varchar2(10):= get_application_property(connect_string);
msqlldr varchar2(300);
ctrl_filename varchar (300) := 'D:SethuPayModifiedFormsars_clock_dump.ctl';
data_filename varchar2(300) := 'D:oracleproduct10.2.0db_1BINabc.dat';
fname varchar2(1000);
[code]....
I have upload an image in forms6i, in oracle apps
On button press event, code is...
DECLARE
V1_PATH VARCHAR2(50);
BEGIN
V1_path := get_file_name('C:IMAGE', NULL,
file_filter=> 'JPEG Image (*.JPG,*.JPEG,*.JPE,*.JFIF)|*.JPG|Bitmap Image (*.bmp)|*.bmp|GIF Image (*.GIF)|*.GIF|TIFF Files (*.tif)|*.tif|All Files (*.*)|*.*|');
DECLARE
[code]....
But it giving error message when preesing the button i.e. FRM-47105: NO image name specified.
I'm using oracle 10g and Forms 9i . I need to upload a PDF file from client to server no to database, just like File, is there any way to get it, no webutil using.
View 1 Replies View Relatedi have this table structure create table file (id number, media_file blob).how i upload pdf or jpg files from this table to computer for example to C:myfiles
View 3 Replies View RelatedDo you have sample codes to upload file from client to server using 11g forms?
View 2 Replies View RelatedMy problem is that when i sign in on Enterprise Manager page ( URL.... ), i don't see that green up arrow that status is UP (and also those charts), but status: Agent unreachable: URL....
I tried to do what is specified in the Metalink(also here: URL.....), but the problem persists. And that metalink note (317242.1) applies to EM Grid Control (maybe that solution works for EM dbconsole also). So i don't have a Grid Control.I tried to stop dbconsole, then start it and then start upload agent ( emctl upload agent), but i got:
C:Documents and SettingsSorin>emctl upload agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
EMD upload error: Upload was successful but collections currently disabled - disk full
The agent status is:
C:Documents and SettingsSorin>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent Version : 10.2.0.4.2
OMS Version : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
[code].....
The EM documentation does not work in this situation (and i specify this because sybrand_b has a problem with users who don't read the documentation.. ) However, i read here: URL....
"The agent collections will stop when the space on the disk is used beyond the default. Solution is to release the space on the disk."how to release space on the disk? What exactly means this? I have enough space on my D partition, where the Oracle product is. What should i do now? I want to see the EM page like this: URL....
We are using APEX 4.1. When we try to upload data to a table through upload wizard, even if the record is an update , it still shows "Insert" and then fails with "Primary Key violation" error. We have defined the correct Primary key at table and APEX interface.
View 3 Replies View RelatedI'm new to using Webutil to upload and view files and am receiving the error msg 'WUT-113 Too many rows matched the supplied where clause' The process works fine for uploading photos but not when I try and upload documents and pdf files.
The code example (for documents) is outlined below but think that the issue must be to do with some sort of incorrect Webutil configuration on my machine.
declare
vfilename varchar2(3000);
vboolean boolean;
[Code]...
The :blob_id column is populated on the form with the when-create-record trigger. Why is the program at time of upload to the db saying that more than 1 row is being written to the db table?
Using Forms 10g and Webutil. I am uploading my file using the following code. The Status shows file upload is Successful.. but NO Record exists in the Table...!
Here is my Table Structure:-
CREATE TABLE ST_ATTACHMENT_ACCOUNT
( ACCOUNT_CDE NUMBER(8,0) NOT NULL,
FILE_NAME VARCHAR2(100),
FILE_BLOB BLOB)
TABLESPACE PRODTABLES;
Here is my -
PROCEDURE UPLOAD_DB IS
lb_success boolean;
ls_full_filename varchar2(200);
ls_filenm varchar2(100);
BEGIN
[Code]...
It shows me the progress bar for upload also but I cannot see any record on the table.
SELECT dbms_lob.getlength(FILE_blob)
FROM ST_ATTACHMENT_ACCOUNT
WHERE ACCOUNT_CDE = 2;
0 rows selected... what is wrong...?
For one of the server, we are able to start the agent but the status showing is UNKNOWN. So all the targets (50+) in Unknown state.
In the grid its in Blocked agent. We tried to unblock and did the Agent Resynchronization for this. At the end getting below error message as
Thread-9668 ERROR ThreadPool: Could not create thread, ERROR=12:Not enough space
In the emagent.log seeing below error
2010-11-12 21:03:48,950 Thread-9966 <Scheduler> Error Creating Thread for Upload Manager, OS threads exhausted (00951)
OS - AIX
DB Version - 10g
Agent version - 10g
I would like to write download & upload plug in control using oracle pl/sql. Provide me some plug in play code .
DB : Oracle
Front End : .net
I want upload file to server and i know i can use Java Bean but i don't know how i use java beans?
View 3 Replies View RelatedIs there any way to upload a file to APEX as BFILE instead of BLOB? I need it to be BFILE since I will be only using XE which means I have limited data storage and unfortunately the system will allow users to upload and download files of different formats (.exe,.bat ) etc. which can be as big as 10MB. Also, how to download these files considering the authentication of the application.
View 3 Replies View RelatedI am new to the Upload data from excel to Table..... how to implement on this.....I need code for UpLoad CSV/XLS Files to the Table ....Table name T_UPLOAD have contains 40 columns....
View 3 Replies View Relatedoracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I am uploading the data file which is a .csv, into one of the tables.. Few columns of the data file, contains sentences in German - like- Lötstelle Zinnspritzer Zinnschluß .. and while loading the problem that i encounter is - it doesnt recognize the commas, and doesnt know where the field ends..
e.g., in this line 1540,Lötstelle Zinnspritzer Zinnschluß,solder short,45230,94885,0,0,0,0,0,0,0,0,0,0,0,0
sometimes it assumes comma after 1540,Lö,tstelle and then no commas till Lö, tstelle Zinnspritzer Zinnschlußsolder short,
and sometimes, the whole as one line Lötstelle Zinnspritzer Zinnschlußsolder short4523094885,0,0
I want to create a form in oracle 10 g . In this form i want download & upload any excel file.
View 2 Replies View RelatedPretty new to APEX and was hoping to accomplish with native functionality.
Using the latest APEX, there is nice functionality that creates a wizard for you for a single table. I wanted to have a single wizard but pick a table then have the ability to map my fields for insert/update.
download / upload data from / to database through oracle forms 6i which is deployed in oracle apps 11i.I am using DDE/OLE2 but it is downloading if form is stand alone but when i post this form in my UNIX server, it is not downloading.
Oracle apps is in UNIX and i want excel to be in client (windows).what procedure to be used.
I have a problem with my DB agent. it doesn't upload data correctly, so I can't see updated information in first page of EM ( it doesn't show cpu usage, Active Sessions, Listener properties,...). when I checked the logs, I found that emagent.trc shows this error: "exceed max amount of upload data: 77 files, 52M, disabling collections warn : collector : disable collector"
( I use Oracle Database 10g on Suse Linux 10.2)
i have 1500 images in jpeg format i want to upload this immages into my oracle database
i did this steps using google serach
1) Create the table as follows
Quote:SQL> CREATE TABLE image_table (file_id NUMBER(5),
2 file_name VARCHAR2(30),file_data BLOB);
Table created.
2)
Create the control file as follows in notepad and just give a name control.ctl ....ctl extension is needed
Quote:LOAD DATA
INFILE *
INTO TABLE ron.image_table
REPLACE
FIELDS TERMINATED BY ','
(
file_id INTEGER EXTERNAL(5),
file_name CHAR(30),
file_data LOBFILE (file_name)
TERMINATED BY EOF
)
BEGINDATA
1,F:Koala.jpg
3)
Run this command on command prompt
F:oracleproduct10.2.0db_1in>SQLLDR control=E:control.ctl
Username:system
Password:
SQL*Loader: Release 10.2.0.5.0 - Production on Thu Jun 9 16:20:17 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Commit point reached - logical record count 1
4)
Now check this image file load in oracle by using this
SQL>
SQL> Select file_id,file_name,DBMS_LOB.GETLENGTH(file_data ) Length from Image_table;
FILE_ID FILE_NAME LENGTH
---------- ------------------------------ ----------
1 F:Koala.jpg 780831
SQL>
but actuly i want to file_name is my actul employee name like Ramesh Patel so what are the changes i can do into my this control file so i can get this file name as my employee name and using this tool i can upload 1500 images into database easily
I have a major issue because I have to finish this project by tomorrow and I don't know how I could create a button on a form that will pop a window where the user can browse his system for and Image, select it and upload it on the Database.
The idea is that I have this table called APPLICANTS with columns like:
applicant_id
name
surname
housenumber
street
town
photo
I have created a registration form for the applicant inorder to register to the system but I just can't figure out how to upload a photo of the applicant.