ORA-06508: PL/SQL: could not find program unit being called ORA error, why it is getting, what is the corrective action for this error. i checked my package and dependent objects all are in VALID state only. But as soon as i get this error, LAST_DDL_TIME for my package is being changed to current time when the package was running.
View 10 Replies
I am using oracle 10g and toad 11.5 . i am trying to call an api from an anonymous block . If i recompile the api after adding dbms_output.put_line and then try to execute the anonymous block ,it shows error as "ORA-06508: PL/SQL: could not find program unit being called". However if i end current session and open a new session , then the anonymous block will execute without the error. i am made to reconnect the session everytime i make a change to API. making any configurations in toad or database level.
View 12 Replies View RelatedI am facing below Oracle error when ever I am changing the contents of the package within it. %ORA-06508: PL/SQL: could not find program unit being called:
The packages and the dependents are recopmiled successfully and there are no invalid objects.The problem is resolved only if the database is reastarted.
What might be the problem?I am using a PL/SQL collection of record datatype in this package.
When i am trying to create awr snap shot using
exec dbms_workload_repository.create_snapshot;
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_WORKLOAD_REPOSITORY" has errors
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_WORKLOAD_REPOSITORY"
ORA-06512: at line 1
I am getting below error when SP (Packaged Procedure) is called from application...
ORA-06508: PL/SQL: could not find program unit being called
After checking DB, i found package to be valid and call to SP giving same error ORA-06588.If i fire alter command to compile the package..
alter package name compile; and then if i try to run the SP in db it runs sucessfully.again after some time ORA-06508 it occurs again. after compiling it starts working fine again.
Body of the procedure :-
begin
indexFields.extend;
indexFields(indexFields.last) := ATTRIBUTE_REC_TYPE(i_attributeName,i_attributeValue);
o_errorcode := '0';
o_errormsg := null;
EXCEPTION
[code]....
sometimes it is working fine, sometimes gives error on compiling it works again.
Actually what happens is that we are connected to oracle through forms 6i. suddenly we receive the error " ORA-06508: PL/SQL: could not find program unit being called "
while doing some transaction. we have searched on net and meta link. they say that the package / procedure called has become invalid or recompilation has occurred and that is not compatible. Now we have monitored carefully that there are no changes what so ever has been made in the the package/ procedure.
what could be the reason behind this. we have also checked the global variable issue. we use package level variables but declared in the package body only. (so these are not public)
When I run my package in TOAD and SQL plus I am not getting any errors. My package is being compiled well. When I integrate my Package through WED ADI .I am getting the above error. I am new to oracle apps WEDADI. can any give your valuable sugessions. I have even bounched the apache two times.
The schema for my package is APPS. Can you tell us how to go check the schema of WEB ADI. We see my integrator created in BNE_INTEGRATORS_TL. Since it is store in BNE table, the schema for BNE table is 'BNE'?
How to provide the access of package to the WEB ADI?
i am creating a report using a function in the select query..suppose this is my function that i created in the program unit of the report
FUNCTION is_numeric_rep (p_strval in varchar2) RETURN
NUMBER
IS
l_numval NUMBER;
BEGIN
l_numval := TO_NUMBER(p_strval);
RETURN 1;
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END is_numeric_rep;
and also suppose this is the query of the report
Select
is_numeric_rep('343aa43')
From dual
when pressing ok on the query statment in the report it give me this error: ORA-00904 "is_numeric_rep":invalid identifier although when i create this function as a stored function in the database schema and use it in the report it works fine with no problems.
know when to use a formula column and when to use a function in program unit in oracle reports.
View 1 Replies View Relatedi just want to know how can i create a procedure in the program unit and assign the output to a field in the report.
View 7 Replies View Relatedemca -repos create - ran clear
emca -config dbcontrol db - failed with following:
SEVERE: Error Loading TransX:Listener refused the connection with the following error:
ORA-12523, TNS:listener could not find instance appropriate for the client connection
lsnrctl status
*************************************************************************
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
Start Date 13-AUG-2013 15:39:06
Uptime 0 days 0 hr. 26 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
[code]....
I have a database in which there are lots of programs running by default user or programs started by some oracle users.
Now, I know that the USER tablespace is growing at very high speed - But I dont know which user/program is causing this growth of USER tablespace.
how to identify the program/user who is responsible for this growth of USERS tablespace.
In my Organization I am trying to install oracle ODTwithODAC112030 but one Error showing that is java virtual machine could not find main class program will Exit.
Server Configuration Dell power Edge r510 Windows 2003 64 bit serv PAck 2 Citrix Presentation server 4.5 .
I have a Cobol program that call C program above
#include stdlib
EXEC SQL INCLUDE SQLCA;
EXEC SQL BEGIN DECLARE SECTION;
char *uid = "puntos/puntos@cmrdesar";
[code]....
Are something wrong in C programm ? Pro*C code from vouters.dyndns.org/tima/OpenVMS-Cobol-C-Cobol_ passing_ variable_ number_ of_ arguments_to_C.html
For a one week, oracle database (v 9.0.1.0.0) is hanging frequently.I could't showdown/restart the database. After restart the server (RedHat), the database is opened without any problem.after 9 or 10 hours once again hanging. too large spaces are availble in my HardDisk.
View 3 Replies View RelatedI can able to login to the database through an user A. But when I try login as B,I am getting the follwing error. ORA-12154: TNS:could not resolve service name...I am using the following method.
1. Login to the database server via putty.
2. sqlplus A/****
for the user A,the step2 is working fine. But the same step is failing for the user B.And the user B is trying to connect to the database from the same server as the user A logged in to the database successfully.
db01: sqlplus B/*****
SQL*Plus: Release 9.2.0.4.0 - Production on Wed May 19 13:12:52 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve service name
Enter user-name: I don't know why this error is coming for a particular user only.
I have tried a lot by alternate solutions like rearranging the order of tables in join and moving where conditions before but no success...Its a bottleneck and I could not have indexes on these tables in production...I want to change the approach in subquery
SELECT
g.COLUMN1,
g.COLUMN2,
e.COLUMN3,
g.COLUMN4,
MIN(e.dat1) KEEP ( DENSE_RANK FIRST ORDER BY date2 Desc) * -1,
min(to_char(date3,'dd-mm-yyyy'))
[code]....
we couldnt access the dba_segments table from the named stored proc however its working fine if accessing from unnamed SP.
SQL> declare
2 cnt number;
3 begin
4 select count(*) into cnt from dba_segments;
5 dbms_output.put_line('cnt='||cnt);
6 end;
7 /
cnt=6746
PL/SQL procedure successfully completed.SQL> create or replace procedure test
2 is
3 cnt number;
4 begin
5 select count(*) into cnt from dba_segments;
6 dbms_output.put_line('cnt='||cnt);
7 end;
8 /
Warning: Procedure created with compilation errors.
SQL> show error
Errors for PROCEDURE TEST:
LINE/COL ERROR
-------- -----------------------------------------------------------------
5/1 PL/SQL: SQL Statement ignored
5/31 PL/SQL: ORA-00942: table or view does not exist
SQL>oracle version
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
im failing to connect im this error- status:failure-lo exception:The network adapter could not establish the connection.
View 8 Replies View RelatedAfter our client upgraded to 11g database and application server, they are getting this error while trying to access another form from the option menu (The option menu is generated with a library, the values are taken from a database table). This issue occurs only in one particular scenerio, and only in on form, other forms with similar functionality and same structure are working perfectly fine. The error is written below.
FRM-21011: PL/SQL unhandled exception ORA-06508
I tried in my environment (10G), no error exist there.In 11G environment, I tried re-attaching a library in the form and compiling again, the error does not come after recompiliation. But the client can still see the error even after recompiling the form (after reattaching that particular library).I could find the below info on google:
FRM-21011: PL/SQL unhandled exception %s.
Cause: An unhandled exception occurred while executing a menu trigger.
Action: Examine the text of the exception in this message. If this indicates a cause,
correct it. If the problem persists, contact Oracle Support Services.
Level: 25
Trigger: None
I am using form builder 10G, will compiling the form using Form builder 11G?
when ever the developer connecting to database to generate froms or While trying to create inventory categories below error is appearing.
FRM-40735: On-error trigger raised unhandled exception ora-06508..
I am in process of migrating Oracle 6i Forms to Oracle 10g Forms.
In 6i, the Form compiles and runs without any giving any error.
In 10g it does complie without any error but gives following Runtime Error Message -
FRM-40735: ON-ERROR trigger raised unhandled exception ORA-06508
difference between stripe attribute and the AU size.The ASM distributes the data in AU in the disk, and what the role of strip size in this case?
View 2 Replies View RelatedIs there a webpage that posts the units of the fields in statspack Example readtim in PERFSTAT.STATS$FILESTATXS (centiseconds?)
SELECT snap_id
,phyrds
,readtim
,phywrts
,writetim
,wait_count
FROM PERFSTAT.STATS$FILESTATXS
The following error has occurred:
ORA-06550: line 26, column 30:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 7, column 6:
PL/SQL: SQL Statement ignored
I am getting the error when i run the below anonymous block. Historic_report_data has got plenty of columns and using only the columns that are in tb_Statement in the query. It is working fine if i use a table with same number of columns as tb_statement instead of historic_report_data.
DECLARE
v_cnt NUMBER:=0;
v_data_load_error EXCEPTION;
BEGIN
dbms_output.put_line('Reconciliation scripts');
dbms_output.put_line('Reconcile tb_bank_Account_month and report_hist_data');
[code]....
When I list the parameters with "show parameter", I get only numeric value for hash_area_size with no unit, what is the unit for that value and conversion of it to MegaBytes.
View 3 Replies View RelatedI have a table called "Subjects" which lists subjects to match with notations in another table I have created a simple sequence (CREATE sequence subjectid) to created the subject id for the table. But I notice that if there is a skip in the date, the sequence increments automatically when I am not even using it. It even appears to be incrementing even when I am not doing any database activity.
This is not an issue of data integrity, because the values in the subject_id column do not need to be sequential, they just need to be unique. But it really has me curious. I created another table called "keep_track" to keep track of what is happening:
16-NOV-12 2952
16-NOV-12 2953
16-NOV-12 2954
16-NOV-12 2955
16-NOV-12 2956
16-NOV-12 2957
16-NOV-12 2958
16-NOV-12 2959
16-NOV-12 2960
16-NOV-12 2961
16-NOV-12 2962
[Code] ......
I have a procedure in the live environment , which operate in 2 mode.
1 regular load at 10 min
2 nightly
The code is same except they set the last loaded time for both in 2 dfferent rows, so that next time run will get incremental data.
I can trace this procedure on mode 1 that is is scheduled but unable to find how the 2nd one is getting trigger every night. there is no jobs corresponding to that. Is there any way i can find which method is trigger the procedure during night.
I am trying to select the owner of a certain object, only knowing the name of the object and the user calling it.
Problem is this object might exist in more than one schema with the same name, and I only need the one that is called by the active user, which himself/herself might have access to other schemas containing their own copy of the object.
Example:
SELECT OWNER
INTO v_schema_name
FROM ALL_OBJECTS
WHERE OBJECT_NAME = p_object_name;
This works fine, until the object exists in more than one schema to which the current user has access.
A Java program would call a sequence of 5 PLSQL procedures, and they all need to participates the Tranasction defined in Java.
What do I do for the transactions inside PLSQL to ensure all 5 pariticpate in the Java transaction? I suppose I just do not specify any COMMIT in the PLSQL, but that probably would not work as PLSQL would COMMIT by default after exiting the proc?
