SQL & PL/SQL :: How To View Rows In Table Format Using Select Query
May 28, 2012
I need to view the rows of the result of a select query in table format in GUI application.I have used XMLELEMENT to somewhat match the scenario to display as ','(comma) separate values as b belwo
SELECT RTRIM (XMLAGG (XMLELEMENT (e, EMPNO || ',')).EXTRACT ('//text()'),
',')
AS empid,
RTRIM (XMLAGG (XMLELEMENT (e, ENAME || ',')).EXTRACT ('//text()'),
[code]...
But the case is I need to display the value in table format Horizontally as below
EMPIDemployee nameDEPID
778
278CLARK10
397MILLER
934KING
[code]...
View 14 Replies
ADVERTISEMENT
Feb 20, 2013
i have a select query with four table its generating around 650 rows. and i need to update these 650 rows only.
for example
update ps_po_lining b
set y.recv_req = 'N'
where recv_req in
[Code]....
this query runs but its updating 6000 rows. which is not right. we need to update what ever the select query is retrieving.
View 5 Replies
View Related
Dec 12, 2012
i like to display a Table data like the below format,
Output:
EMPNO JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
00094 122 153 145 224 245 545 114 544 444 111 555 222
00095 233 123 145 224 205 545 114 444 444 111 555 222
00096 163 123 145 224 215 545 114 551 444 111 555 222
00097 163 0 145 224 215 545 114 551 444 111 555 222
conditions:
where condition:
where year = 2007
Table Structure:
create table HR_PAYSLIP
(
EMP_NO VARCHAR2(6) not null,
YEAR NUMBER(4) not null,
MONTH NUMBER(2) not null,
BASIC_PAY NUMBER(9,2),
)
Insert Command;
INSERT INTO PAYSLIP (EMP_NO, YEAR,MONTH,BASIC_PAY)
VALUES(00046, 2007, 1, 2314);
Pls Note: The above table data i have mentioned is an example with employee numbers and the basic_pay for all months in the particular year 2007, the employee no may be more and that must be displayed only one time like above for year 2007, and if the basic salary is zero for a month then it should be displayed as zero for a particular month
So how to write a Query for that?
View 9 Replies
View Related
Jun 13, 2007
In sql plus How do I get the number of distinct rows of a certain value?
for example
select group_number from records group by group_number
How would I query for the total number of group_numbers in this query?
View 2 Replies
View Related
Apr 1, 2012
I need to get the super set(parent) record from a relational table. Following is the structure of the table,
create table relation (data_field1 number(20),data_field2 number(20),data_field3 number(20),
primary key (data_field1,data_field2,data_field3) );
insert into relation (data_field1, data_field2, data_field3) values (-10,123,334);
insert into relation (data_field1, data_field2, data_field3) values (200,123,334);
insert into relation (data_field1, data_field2, data_field3) values (300,123,334);
insert into relation (data_field1, data_field2, data_field3) values (400,123,334);
[code].....
Here '-10' will be considered as parent(super set) for all other values. If i have records like below,
-10 200 300
100 200 300
123 200 300
521 201 300
Output should only contain two rows. A super set row and other distinct row(second column value is not equivalent to super set).
View 14 Replies
View Related
Oct 29, 2012
I want to get top two rows based on ACCT_UNIT & order by status_date, if there is only one row on acct_unit, get one row. IF more than two rows available, want to get the top two rows based on status_date.
SELECT ACTIVE_STATUS, ACCT_UNIT, DESCRIPTION, DIRECTOR, DIRECTOR2, STATUS_DATE, OBJ_ID, STATUS_FLAG, SUR_KEY
FROM STSI
View 10 Replies
View Related
Sep 2, 2008
i want the 10 most recent mission date from mission table . i have tried using rownum but could not get it. TOP does not work
select * from
(select length(code_name) leng from missions
where length(code_name) >7
order by mission_date)
where rownum = 10
;
this does not work ::: no rows are selected and i do rownum = 1 then gives me one record and when i do rownum>=1 gives me all records
View 10 Replies
View Related
Jul 13, 2013
There are two tables like I posted below.I want a SQL query which selects all the rows from TABLE A which are not present in TABLE B. Also the select statement should pick all those rows which has updated value of COL_A2 in TABLE A.
TABLE A
COL_A1COL_A2
AAAMOBILE
BBBTABLET
CCCDESKTOP
DDDUNKNOWN
TABLE B
COL_B1COL_B2
AAAMOBILE
BBBUNKNOWN
CCCDESKTOP
The select statement should return following rows from TABLE A
COL_A1COL_A2
BBBTABLET
DDDUNKNOWN
View 2 Replies
View Related
Aug 20, 2012
select the rows from a table with the same particular field in PL/SQL. Actually I don't want to write two loops one inserted into another.
View 7 Replies
View Related
Aug 23, 2010
We were trying to insert approx 76 million records worth of approx 4 GB in a table when the insert operation failed with the archive log error.
The database was hanged, we re-started the database and currently there are no records in the table but when we are firing a select
select count(*)
from table
It's taking approx 2 mins to come out with the result.
We checked and found that there are no locks on the table currently.
what do we need to do to get the performance back
View 5 Replies
View Related
Aug 3, 2010
I have a table with name SQL_STATEMENTS and it has 1 column, Column name is STATEMENT_DESC
The contents of rows in Table above are:
select * from emp;
select * from dept;
Can I write a PLSQL block that can select these 2 rows from the table and execute them?
View 9 Replies
View Related
Apr 25, 2012
We wrote one data load process to load GZ files into Database.during process we will change client facing view definitions to backup table so that we can work on base tables.
This view definition changes are related to FROM and WHERE clause (not columns/type). during load process, client/user may connect to current server and accessing these views. My question is what will be the reflection of changing view definition while user is accessing view?
I created a scenario-
STEP1: Created a view-
create or replace view view_01 as
select object_name from dba_objects union all
select object_name from dba_objects union all
select object_name from dba_objects union all
[code]....
View definition is replaced by new definition while select is executing on that view. select returned number of records as per view definition one.
View 6 Replies
View Related
Jun 7, 2012
How to find display the o/p like manager name under dependent employess same like parent child relation ship on noraml emp table:
sample o/p:
name job
xx manger
yy sales
yy1 sales
aa manager
rr marketing
rr1 marketing
View 6 Replies
View Related
Jun 22, 2011
I have this table
create table ACTIONARI_ARH
(
actionar_id NUMBER(10) not null,
id VARCHAR2(20) not null,
id_2 VARCHAR2(20),
tip VARCHAR2(1),
nume VARCHAR2(100),
prenume VARCHAR2(100),
adresa VARCHAR2(200),
[code]....
and this view
CREATE OR REPLACE VIEW ACTIONARI AS
SELECT "ACTIONAR_ID","ID","ID_2","TIP","NUME","PRENUME","ADRESA","LOCALITATE","JUDET","TARA","CERT_DECES","DATA_REGISTRU" Data_operare,"USER_MODIF","DATA_MODIF","REZIDENT"
FROM (
select
[code]....
The table has about 30 milion records and holds persons names, addresses, personal id (id), and internal id(actionar_id) and date when a new adress has been added.
The view is about getting only the most recent info for one person (actionar_id).
if i run a
a) select * from actionari a where a.actionar_id = 'nnnnnnn', result is returned immediatly, oracle uses index and does not do a full table scan.
b) select * from actionari a where a.actionar_id in ('nnnnnnn','mmmmmm','ooooooo'), result is returned immediatly, oracle uses index and does not do a full table scan.
my problem when i use this view in a join.let's assume i have another table with no more than 500 records, something like
create table SMALL_TABLE
(
actionar_id NUMBER(10) not null,
......
);
and if i run
select *
from SMALL_TABLE s
join actionari a
on a.actionar_id = s.actionar_id;
it takes like forever to process, forever means 1~3 minutes.by looking at the execution plan, oracle does a full table scan, creates the view for all unique 7milion persons, and only then joins the result with the actionar_is's in the small table and returns the desired 500 record result.i am using oracle 10g.
View 2 Replies
View Related
Oct 29, 2012
There are 4 rows in table with stat_flag 'Updated Record' and stat_date with todays date.
stat date has date & time both, for that reason just trying to format with yyyy.mm.dd
I am getting zero rows as result.
where STAT_FLAG = 'Updated Record' and to_date(stat_date,'yyyy.mm.dd') = to_date(sysdate(),'yyyy.mm.dd')
View 4 Replies
View Related
Oct 1, 2013
create table a(sourcerow number(2), test_level number(2), dpn varchar2(1), qty number(5)); T
he insert scripts are as follows:
insert into a values(1,3,'Y',5); insert into a values(2,2,'Y',4); insert into a values(3,3,'N',3); insert into a values(4,4,'Y',3); insert into a values(5,1,'N',6); insert into a values(6,2,'N',5); insert into a values(7,2,'Y',4); insert into a values(8,3,'N',2); insert into a values(9,4,'Y',2); insert into a values(10,1,'Y',3); . SQL>select * from v$version; Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
My logic should have the output as follows without 5th column: sourcerowleveldpnqtyremark13Y522Y4This row in main table shouldn't be displayed in the query result as it has
dpn='N'44Y3*3=9In this row qty=9 will bedisplayed.
It will compare the value of level column with its previous row level col,if it is the parent of the current(ex.current is 4 and previous is 3 parent of 4),then it will check the dpn of previous row ,if dpn='N' then qty of parent will be multiplied with qty of current row and displayed under qty column.this row will not be displayed as dpn='N'this row will not be displayed as dpn='N'72Y4*6=24in its previous row level value is same so it will check the previous to previous row where level is 1(parent of current row) and dpn='N' ,then it will multiply the qty of that row with current row and display the value in qty column.this row will not be displayed as dpn='N'94Y2*2=4In this row qty=4 will be displayed.It will compare the value of level column with its previous row level col,if it is the parent of the current(ex.current is 4 and previous is 3 parent of 4),then it will check the dpn of previous row ,if dpn='N' then qty of parent will be multiplied with qty of current row and displayed under qty column.101Y3It will not check for the previous rows as level 1 doesn't have any parent.
View 5 Replies
View Related
Sep 13, 2004
Can we create a table from a Select query ?
View 5 Replies
View Related
Mar 22, 2013
I have a table A on dev with definition as TAble A(address,name) and the same table on Prod is defined as Table A(name,address).
my question is Ihave one package in that am trying to insert into this table as follows:
INSERT INTO A
SELECT b.name name,
a.address address,
[Code]....
so the query works on Prod but fails on Dev because column order is different.
I have 2 solutions:
1. I can mention column names in insert line and modify the query but tomorro some body changes again the definition of table A I need to change the query, so do I have solution in oracle sql that can handle the column order without specifying the column names in insert line.
so tomorrow On prod column order and on Dev column order is different though my sql should successfully execute.
View 5 Replies
View Related
Oct 30, 2013
How does one select * from one table without selecting * from other tables that are included in a query? For example, if in the query below I want to view all fields in some_table, but not the fields from other_table, how do it?
select *
from some_table st,
other_table ot
where st.id = ot.id
View 15 Replies
View Related
May 25, 2013
Lets say I have a table in ORACLE database like:
ACC_ID | ACC_AMT
111 | 10000
111 | 12000
111 | 14000
222 | 25000
222 | 30000
333 | 18000
333 | 27000
333 | 13000
333 | 15000
I want to get the output as:
ACC_ID_1 | ACC_AMT_1 | ACC_ID_2 | ACC_AMT_2 | ACC_ID_3 | ACC_AMT_3
111 | 10000 | 222 | 25000 | 333 | 18000
111 | 12000 | 222 | 30000 | 333 | 27000
111 | 14000 | null | null | 333 | 13000
null | null | null | null | 333 | 15000
I need each different ACC_ID with ACC_AMT in different columns. The table may have other different ACC_ID also, but I will fetch only what I need. What is the best way to do this?
So far I have tried this:
SELECT
(CASE WHEN ACC_ID=111 THEN ACC_ID END) AS ACC_ID_1,
(CASE WHEN ACC_ID=111 THEN ACC_AMT END) AS ACC_AMT_1,
(CASE WHEN ACC_ID=222 THEN ACC_ID END) AS ACC_ID_2,
(CASE WHEN ACC_ID=222 THEN ACC_AMT END) AS ACC_AMT_2,
(CASE WHEN ACC_ID=333 THEN ACC_ID END) AS ACC_ID_3,
(CASE WHEN ACC_ID=333 THEN ACC_AMT END) AS ACC_AMT_3
FROM <TABLE_NAME>
But I am not getting the desired result.
View 22 Replies
View Related
Aug 23, 2012
I have 12 different tables
Record_jan
Record_feb
.
.
.
Record_nov
Record_dec
Based on the month i need to do some i/o operations from these table.
For eg: If it is january then Record_jan table should be accesed or for nov Record_nov table should be accesed.
If I try to store the table name in some variable and then give the variable name in place of table name then it gives error.
var:=Record_month;
Select * from var;
this gives error.
View 3 Replies
View Related
Sep 7, 2012
Here is my case,
create table t (id number,row_id number primary key ,value number);ID row_id value
1 1 10
1 2 11
1 3 1
2 4 11
3 5 11
3 6 12
4 7 12
4 8 12
4 9 13
4 10 11
4 11 10Requirement is
1) To get all the ID that have the value 10
2) The row_ids for the ID I got in I
Can I do this with Hierarchical query. If not which one of below will be fast?
select * from t where id in (select id from t where value=10);
or
select T2.* from t T1, t T2 where T1.ID=t2.id and T1.VALUE=10;
I have billion of rows so I am looking for either Hierarchical query to solve it or some other way . All the three column the index.
View 5 Replies
View Related
Mar 21, 2013
We are trying insert records from a select query into temporary table, some of the records is missing in the temporary table. The select statement is having multiple joins and union all which it little complex query. In simple terms the script contains 2 part 1st Part Insert in to temporary table 2nd part Select query with multiple joins, inline sub queries, unions and group by classes and conditions Eg. If we execute select statement alone it returns some count for example => 60000 After inserting into the temp table, in temp table the count is around 42000 why is the difference?
It is simple bulk inserts... insert in to temp table select * from xxx. also, there is no commit in between. The problem is all the records populated by the select statement are not inserted in to temp table. some records are not inserted.
Also, we had some other observation. It only happens in its 2nd execution and not its first run. Hope there might be some cache problem Even, we also did not believe that. We are wondering. In TOAD, we tested however at times it happens. In application jar file, after "insert in to temp select * from xxx" we take the i. record count of temp table and ii. record count of "select * from xxx" separately but both doesn't match. Match only at 1st time.
View 16 Replies
View Related
Aug 15, 2013
I have a table that contains a CLOB column with pseudo-XML in it. I want to keep this data in an XMLType column so that I can leverage some of Oracle's built-in XML features to parse it more easily.
The source table is defined as: CREATE TABLE "TSS_SRM_CBEBRE_LOGS_V" ( "INCIDENT_ID" NUMBER, "EVENT_TYPE" VARCHAR2(100 BYTE) NOT NULL ENABLE, "EVENT_KEY" VARCHAR2(100 BYTE), "CREATION_DATE" TIMESTAMP (6) NOT NULL ENABLE, "CREATED_BY" VARCHAR2(100 BYTE) NOT NULL ENABLE, "LOG_MSG" CLOB);
The target (for testing this problem) table is defined as: CREATE TABLE "TESTME" ( "LOG_MSG" "XMLTYPE") My query is: insert /*+ APPEND */ into testme ("LOG_MSG")select XMLTYPE.createXML("LOG_MSG") as LOG_MSG from "TSS_SRM_CBEBRE_LOGS_V" b; In SQL*Developer, my error is: Error report:SQL Error: No more data to read from socket In SQL*PLUS and Toad, my error is: ORA-03113: end-of-file on communication channelProcess ID: 13903Session ID: 414 Serial number: 32739
View 6 Replies
View Related
Jun 18, 2013
I am trying to run the following queries in my database.
Q-1)select * from item where trunc(approval_date)='21-MAY-13'
When Q-1 is executed it returned row that has approval_date of 21-MAY-13 from database.
Q-2)select * from item where approval_date=to_date('21-MAY-13')
When Q-2 is executed it says no rows selected.
difference or if any links related to this.
View 4 Replies
View Related
Nov 16, 2011
I am not able to find any information regarding inserting data with timestamp format without putting the date.
This is what i want to do:
ALTER SESSION SET NLS_TIMESTAMP_TZ_FORMAT='DD-MON-RR HH24:MI TZR';
I create the column data type as timestamp with time zone. This is value i have inserted:
Insert Into TEST Values('05-OCT-2013 01:00 +08:00','05-OCT-2013 23:00 +08:00','SCIENCE);
And now i wish to display it in 'HH24:MI TZR' only after i deduct both of the time. This is the view i have created:
Create View TESTRECRDS As Select (STARTTIME- ENDTIME)*24 As DURATION, Science;
But when i select it display as weird timing because it would default in 'DD-MON-RR HH24:MI TZR' format.
BUT IF i create the view and display as 'HH24:MI TZR', it would gives me error:
Create View TESTRECRDS As Select To_Char(STARTTIME- ENDTIME, 'HH24:MI TZR')*24 As DURATION, Science;
Error would be invalid number. How can i display only 'HH24:MI TZR' after subtracting?
View 3 Replies
View Related
Jun 15, 2007
decode (a.cancel_time,'',sum ((to_date('23:59','hh24:mi') - a.alarm_time)*24*60), sum((a.cancel_time - a.alarm_time)*24*60)) Duration,
After executing this statement. I get negative values if cancel time is null
I want to subtract alarm_time by 24 hours, if cancel time is null. If not null then cancel-time - alarm_time
View 1 Replies
View Related
Jun 6, 2008
I am trying to retrieve all rows with the date of May 23rd, 2008. Our data is stored with the date and time.
How do I format the where clause so that the time is taken off? I am still a newbie with oracle and what I have is this:
Select Distinct Table1.*, Table2.*
from Table1, Table2
where Table1.file_name = Table2.file_name
and Table1.downloaded_date = Table2.date_loaded
and downloaded_date = '23/May/2008'
Of course, it's the last line not working because I don't know how to format it and no rows are retrieved when there are definately May 23rd rows stored in there.
View 6 Replies
View Related
Jun 8, 2011
I have job, working hours, employee id, employee name in test_emp table. The job name and employees are not fixed in this table and it varies from project to project. We don't know how many employees are there and needs to be fetching on runtime.
I have the data like below
JOB---------WRKHR---EMPID-----EMPNM
ANALYST-----10------5478------RAMESH
MANAGER-----10------4258------SACHIN
LEAD---------10------4789------VIVEK
DEVELOPER---20------5632------ROHIT
ANALYST-----20------5843------VIRAT
MANAGER-----20------4789------VIVEK
PROGRAMMER-30------5479------SURESH
LEAD---------30------4258------SACHIN
DEVELOPER---30------5231------PRAVEEN
I need the output like below format.
JOB---------RAMESH--SACHIN--VIVEK--ROHIT--VIRAT--SURESH--PRAVEEN--TOTAL
MANAGER-----0--------10-------20-----0-------0------0---------0---------30
LEAD---------0--------30-------10-----0-------0------0---------0---------40
ANALYST-----10-------0---------0-----0------20------0---------0---------30
DEVELOPER---0--------0---------0-----20------0------0---------30--------50
PROGRAMMER-0--------0---------0------0------0------30--------0---------30
--TOTAL-----10-------40--------30-----20-----20-----30--------30--------180
View 6 Replies
View Related
Jul 18, 2012
when I select I have to using AND creation_dt>='17-JUL-12' is there a way to change my select to creation_dt='17-JUL-12' ?
on meantime my local format is 18-JUL-12(18-JUL-12) is thee anything I can do?
View 5 Replies
View Related
