i am using the following within queries:
decode(qt_flag,'KT','Y',decode(qt_flag,'IT','Y','N'))
It works fine but when i use in ETL tool it is not working. Is there a way to use decode just once with multiple values like above.
find the Test Case below.
--Creation of Table
create table tb1
(ID number(4),
event varchar2(20),
vdate date);
--Inserting Values into the Table.
INSERT ALL INTO tb1 (ID, event, vdate) VALUES (01, 'V1', '01-JAN-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V2', '02-FEB-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V3', '04-MAR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V4', '03-APR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V5', '05-MAY-2009')
[Code]...
--Selecting data from Table.
SELECT * FROM TB1;
ID EVENT VDATE
---------- -------------------- ---------
1 V1 01-JAN-09
1 V2 02-FEB-09
1 V3 04-MAR-09
1 V4 03-APR-09
1 V5 05-MAY-09
2 V1 01-JAN-10
2 V2 02-FEB-10
2 V3 04-MAR-10
2 V4 03-APR-10
2 V5 05-MAY-10
10 rows selected.
how can i display the data as below format using Oracle 9i SQL.
IDV1 V2 V3 V4 V5
--- ---------------- ------------ --------------- -------------- ------------
11-Jan-092-Feb-094-Mar-093-Apr-095-May-09
21-Jan-102-Feb-104-Mar-103-Apr-105-May-10
I was trying to write nested decode statement with multiple searches. For example
Case when seq = 1 and date1 > date2 then Record_Name End
How can i modify this to decode.
I have a sample table where I am arranging data in required format using 'decode' by hardcoding all values, how can we do same using pivot method, can pivot be only used when we want aggregate values in oracle?Also can't we do what i did, using generic max(decode) with select query, if it were a large table (i don't know which would be pivot column here?) ?
Table is
SQL> CREATE TABLE NOWT
2 (COURSE VARCHAR2(20),MEMBER VARCHAR2(20));
[code]....
how can we do that using pivot in Oracle?
I have a field that may look like this:
AS01 AB CD EF
I want to check to see if that string contains any of the values in:
select code from codes_table;
For example, if
select code from codes_table;
returns:
code
-----
AB
LM
NO
PQ
then the query should return 'True'. Using the string above it would return 'True' because 'AB' from the string exists in the table codes_table. Pseudocode would look something like this I guess:
if the input string
contains any of the codes
in the field 'code' from table 'codes_table'
then
'OK'
otherwise
'No good!'
i'm trying to put more than one value in one column (by putting value '26','63' in column), so i have next problem:
1. Query select cr_pjid from acc_users where username='ACCBTPS121' give result
CR_PJID
---------
'26','63'
2. Query select * from acc_accbtp_nova_view where ed_id=2 and to_char(pj_id) in ('26','63'); return 186 rows.
3. Query: select * from acc_accbtp_nova_view where ed_id=2 and
to_char(pj_id) in (select cr_pjid
from acc_users
where username='ACCBTPS121'); doesn't return any row...
Most of the code is working properly except when it come to a person with more than one email type in the table:
Below is the
select emal_pidm, emal_email_address, emal_emal_code,
case
when emal_emal_code = 'PER'
and lag(emal_emal_code,1,'?') over (partition by emal_pidm order by emal_email_code) = 'EMPL'
then emal_email_address
[code]......
Below is Sample data for testing
INSERT INTO emal (emal_pidm, emal_email_address, emal_emal_code)
VALUES (1024069, 'emmaus.ferdinand@xxxx.edu','EMPL');
INSERT INTO emal (emal_pidm, emal_email_address, emal_emal_code)
VALUES (1024069, 'emfer1@xxxx.edu','PER');
[code].......
The attachment is what the output should look like.
I am trying to do something like this..
declare
a constant variable (1,2,3);
b number;
begin
select x
into b
from y
if b in a then...
What is the correct way of declaring multiple values in a constant and then using the IN clause.
Here is my requirement..... I am pretty new to PL/SQL.
This is the procedure
CREATE OR REPLACE PROCEDURE ABCPROC.SP_ABC
(
XML IN CLOB,
P_refcursor OUT SYS_REFCURSOR
)
AS
BEGIN
[code]........
For each account number (I_AC), we have multiple rows in ABC_SVC table. I want to return these values in the refcursor. The issue with above SQL program, the row is returning only when the account(I_AC) have values for all the products 100,101,102. If the row does not exist for one account, then the account row is returned with other products.
I want my output should be in the below format
ACCOUNT_NUMBER COMMISSION CONSUL CONTRA
1YYN
2NN
3N
I have used sql for my school projects and work projects. not too extensively though. I came across this issue and read a lot of blogs but still not luck.
hopefully my issue can be solved here.
Data:
Sub_grp_nbr Prodt_ctgy_cd Extra_column
ABC123 05 1
ABC123 02 2
ABC012 05 3
ABC456 02 4
ABC456 05 5
ABC789 05 6
I need to obtain all the sub_grp_nbr's that have a prodt_ctgy_cd of 05 but not 02. so according to the data above, i should only get the results of where extra_column = 3 and 6
I have a source view where I have some invalid records and those should be found based on codes present in another table.
For eg. from source the records come like
****************SIINNSFDFD****FDFDF2******8
**********TABLE****************FDFSFSSFASFAS********
and if my reference table has values
SIINNSFDFD
TABLE
then these values are present as substring in the particular column in the source view. So I need to flag those records. For every record, I need to check whether all the values present in the reference table matches or not. If it matches then it should be flagged.
I can use in operator as we are not checking for the exact match and we are checking whether that value is present anywhere in that column record.
Looping results in performance issue. We can use PL/SQL for this. As the source view is put into a ETL internal file.
I am trying to do something like this
SELECT clave_grupo FROM SS_TTABLAS
WHERE CLAVE_GRUPO IN
(
CASE WHEN (condition) THEN 'v1'
ELSE ('v1','v2',v3')
end
)
This is the error msg:
ORA-00907: missing right parenthesis
just before ,'v2',v3')
For the below query:
SELECT id, pob,exp
FROM emp
where exp= (:exp)or @exp is null
O/P:
id pob exp
_____________________
1 CT 2
2 NJ 3
3 NY 2
It takes only one value of :exp but, I would like to give multiple values separated by ','. My problem is the parameter can be either single value or Blank or multiple values. My code do work for single value and Blank, Now how to implement multiple values .
I have a table as follows
create table teststr (indname varchar2(20),
counter1 number,counter2 number,counter3 number,counter4 number);
insert into teststr values('a',10,20,30,30);
insert into teststr values('b',10,20,5,3);
insert into teststr values('c',2,4,5,2);
insert into teststr values('d',1,2,3,4);
insert into teststr values('e',4,5,4,4);
Now i need the output if any of the column values are same.
output should be
select indname from teststr where counter1=counter2
or counter1=counter3 or counter1=counter4
or counter2=counter3 or counter2=counter4
or counter3=counter4
a
c
e
Is ther any other way to write the query instead of the numerous or conditions if i want to compare the column values in a table.
I want multiple values from a function. I want to use this function in a SQL query. Here i'm giving my try.
SQL> CREATE TABLE TEMP
2 (
3 ID NUMBER(1),
4 SAMPTYPE VARCHAR2(20 BYTE),
5 SALARY NUMBER(10)
6 )
7 /
Table created.
SQL> INSERT INTO TEMP VALUES(1,'ABC',10000);
1 row created.
SQL> INSERT INTO TEMP VALUES(2,'PQR',20000);
1 row created.
SQL> INSERT INTO TEMP VALUES(3,'JPD',5000);
1 row created.
SQL> COMMIT;
Commit complete.
[code]...
Here i get result as ABC*10000, but i want two separate values as ABC,10000. how can i do this via function.
with t as
( select 1 id, 101 book_id, 'MICROBIOLOGY' book_type, 1 category, 'sCIENCE AND TECH' category_name
from dual
union all
select 1 , 101 , 'MICROBIOLOGY', 2 , 'HEALTHCARE' from dual
union all
[Code]....
id book_id BOOK_TYPE category category_name
1 101 MICROBIOLOGY 1 SCIENCE AND TECH
1 101 MICROBIOLOGY 2 HEALTHCARE
1 102 CHEMISTRY 5 CHEMICAL ENGINEERING
2 105 COMP SC 1 SCIENCE AND TECH
The above is the output for a query after joining multiple tables. I have just put here the output I am getting after joining the tables.Now I want to achieve the below result.
Expected output: it should be | delimited
1|101|MICROBIOLOGY|102|CHEMISTRY|1|sCIENCE AND TECH|2|HEALTHCARE
2|105|COMP SC|1|SCIENCE AND TECH
Is there any alternative way other than SYS_CONNECT_BY_PATH? I also tried to use CONCAT_ALL but its not working.
I have a problem with some tables in database.
Table has three columns: userid, pname, pvalue.
Userid has unique values, for example: 234, 123, 587, etc.
In the field pname, there is three possible values: MAC, IP, S/N.
So if I go like this:
select pvalue
from table
where pname = 'MAC';
i get the values of MAC.
If I go like this:
select pvalue
from table
where pname = 'IP';
i get the values of IP.How can I join MAC with IP that is matching this MAC? I need an SQL statement for this.
I have a table second_table which has a username and code field. A username (not the primary key) may be entered multiple times with different codes, or a single code 'ALL', in which case, the codes have to be fetched from 'third_table'. I am unable to form a 'case' clause to handle the fact that a list has to returned when the 'code' field from the second_table returns 'ALL'.
e.g.
Second_table
username code
A ALL
B 23
B 56
B 33
Third_Table
code
67
78
So, when the user asks the codes for user A, he should get 67 and 78 and when he asks for the user B, he should get 23,56 and 33
How to hold the multiple rows values using array? And I have to pass this values to some other procedure.
Ex: SQL> select ename from emp;
ENAME
----------------------
Vetrivel
Dr.Venkat
Vinoth
Sudhakar
Sivaganesh
Senthil
Using pl/sql block , i tried to have a certain input values from Sql prompt but it doesn't work when i invoke it.
Here the simplest
declare
a number(4);
begin
for i in 1..10 loop
a := &a;
end loop;
end;
/
I'm trying to select id's in a table that have 2 certain values for another column. Example below explains:
idCoupon Type
123Amount
123Percent
456Amount
789Percent
I would like to write a sql statement that would select all rows where id=123, because id 123 has both coupon types "Amount" and "Percent". So the result set of the sql statement would look like:
idCoupon Type
123Amount
123Percent
I have a function that returns the total sum of an account. From reports I call the function passing the account code. The function sums the values for that specific account code and returns the value. In my function I have the following code :
where account_code = P_CODE.
Eg. The value of :P_CODE is 'CS'.
I now want to pass multiple account codes ('CS','TV',LJ') to the function. How do I change the IN clause in the function to accommodate multiple values.
I have tried using the instr function, but it does not work. eg. AND instr(o.ACCOUNT_CODES,','||P_CODE||',') > 0
assigning values to a particular variable that i need for my button trigger. I Understand that you can assign multiple values to a variable that has a varchar or char data type....is there a way to assign multiple values to a variable that has a 'number' data type?? I need this for my 'where' clause
declare
usergrade varchar(4) := 'pass';
user_unitcode number(6) := ;--needs three unit codes to equal pass
I am currently doing column values concatenation from multiple rows and then removing duplicates as in the following example:
SQL> select pid
2 , regexp_replace(ltrim(sentence), '([A-Za-z0-9]+,)1+', '1')
3 from ( select pid
4 , seq
5 , sentence
6 from b
7 model
8 partition by (pid)
9 dimension by (seq)
[code]....
but for some reason regexp_replace does not seem to work with clob and I get:
ORA-00932: inconsistent datatypes: expected - got CLOB
00932. 00000 - "inconsistent datatypes: expected %s got %s"
Is it possible to eliminate duplicates in the model before the concatenation?
CREATE TABLE prim_tbl
(id NUMBER,--- id is not primary key here
description VARCHAR2(30));
INSERT ALL
INTO prim_tbl VALUES (1,'aad')
INTO prim_tbl VALUES (1,'aads')
INTO prim_tbl VALUES (2,'bb')
INTO prim_tbl VALUES (2,'cc')
INTO prim_tbl VALUES (2,'dd')
SELECT * FROM dual;
I want to select the ids only one time, i.e my output will have only two rows: one row with id as 1 and other row with id 2 whatever be the description.
desired output sample:
Quote:1, aad
2, bb
I used:
select distinct(id),description from prim_tbl;
but it did not give the required result.How can I get it??
I have following tables with data as under:
table1: table2:
column1 (char) column1 (char) column2 (num)
A A 10
B A 20
C B 15
D C 12
E D 25
D 9
I need to generate output as :
column1 column2
A A10, A20
B B15
C C12
D D25,D9
E null
Is there anyway to achieve this thru simple SELECT ...and if not, then thru any PL/SQL construct..?
I need to create a SQL insert statement with mutipleValues and an select statement I am trying this it works -
insert into uwa_crew_ids(crew_ID, CREATION_DATE, CREATED_BY,LAST_UPDATE_DATE,LAST_UPDATED_BY, LAST_NAME, first_name )
values
( uwa_crew_ids_s.nextVal,sysdate, 1767,sysdate, 1767,'TEST1', 'NITA')
This statement does not work (with or without keyword) Is there any alternate syntax
insert into uwa_crew_ids(crew_ID, CREATION_DATE, CREATED_BY,LAST_UPDATE_DATE,LAST_UPDATED_BY, LAST_NAME, first_name )
( uwa_crew_ids_s.nextVal,sysdate, 1767,sysdate, 1767,(select last_name, first_name from uwa_crew_ids where guid = '8795EAAFBE694F8EE0440003BA2AEC90' ))
Updating multiple ROWS with different values using single statement. Requirement is to update one column in a table with the values in the other table.
Say we have 3 tables, CORPORATION,CORPORATE PROFILE and MEMBER.
Each MEMBER has CORPORATE PROFILE which in turn is associated with CORPORATION. Now I need to update MEMBER table with CORPORATION identifier for members who belong to corporations with identifiers say 'ABC' and 'DEF'.
MEMBER table contains column 'CORPIDENTIFIER '. CORPORATEPROFILE table contains MEMBERID and CORPORATIONID,this will associate a member with the corporation. CORPORATION table contains ID and CORPIDENTIFIER.
Using the below query I am getting error,ORA-01427:single-row subquery returns more than one row
UPDATE MEMBER M SET M.CORPIDENTIFIER=
(SELECT A.IDENTIFIER FROM CORPORATION A,CORPORATEPROFILE B
WHERE B.CORPORATIONID=A.ID AND B.MEMBERID=M.ID AND (A.IDENTIFIER LIKE 'ABC' OR A.IDENTIFIER LIKE 'DEF'))
Sub query in the above query returns multiple rows and hence it is throwing the error.More than one members are associated with Corporations ABC and DEF. Is there any way possible to update all the rows in single query with out iterating the result set of sub query.
The requirement I have is :
I have two tables eim_asset and eim_asset1.I want to update the table eim_asset1 using the following update SQL (Or Logic)
update eim_asset1
set emp_emp_login = (select login from s_user where row_id in
(select row_id from s_emp_per where row_id in
(select pr_emp_id from s_postn where row_id in
(select position_id from s_accnt_postn where ou_ext_id in
(select row_id from s_org_ext where row_id in
(select owner_accnt_id from s_asset where owner_accnt_id is not null)))))
It gives me the ORA error : ORA-01427:single-row subquery returns more than one row.know why I am getting it, because of the one-to-many relationship between owner accounts and their assets.
I have a table called table1 and its structure is as follows:
rtrn_id number,
entp_abn number,
litm_line_item_nbr number
country_code varchar 2(10)
I am trying to find retrieve value/row where for a particular rtrn_id , the possibility of having a country code of "CA"(for Canada) and "US" or "HK" (US or Hong Kong respectively) exists.
I framed my query the following way and it does not retrieve any result in Production and I believe there are a few values/rows in the "table1".
The query framed is:
Query 1:
SELECT rtrn_id,entp_abn,litm_line_item_nbr,country_code
FROM table1
where schd_version_yr = 2010 and prog_program_cd = '01'
and sched_nbr = '000' and (litm_line_item_nbr = '023' and country_code 'CA')
and (litm_line_item_nbr = '016' and country_code = 'CA')
The above query does not retrieve any rows
Where as if I run a query individually it retrieves tons of rows
(Individual query :
SELECT rtrn_id,entp_abn,litm_line_item_nbr,country_code
FROM table1
where schd_version_yr = 2010
and prog_program_cd = '01'
and sched_nbr = '000'
and (litm_line_item_nbr = '016' and country_code = 'CA')
-----Retrieves tons of rows as the country code = Canada for line item # 16
SELECT rtrn_id,entp_abn,litm_line_item_nbr,country_code
FROM table1
where schd_version_yr = 2010
and prog_program_cd = '01'
and sched_nbr = '000'
and (litm_line_item_nbr = '016' and country_code 'CA')
-----Retrieves tons of rows as the country code IS NOT Canada for line item # 23.
There is a possibility that there are rows that have country Code as Canada and not Canada for a particular ID whose line item numbers could be 16, 23.. is there any better way to frame my Query1 to retrieve values/rows?