Using pl/sql block , i tried to have a certain input values from Sql prompt but it doesn't work when i invoke it.
Here the simplest
declare
a number(4);
begin
for i in 1..10 loop
a := &a;
end loop;
end;
/
In SQL*Plus i am accepting value like below examples
1] ACCEPT v_number prompt 'Enter Number ='
2] column db_owner new_value db_owner;
select a.SETTINGVALUE db_owner
from ABC a, DEF b
where a.application_id = b.application_id
I want to confirm after executing this .sql that this variables v_number and db_owner should not have NULL value. I did searched a lot for SQL*PLUS commands. Only way i can check this is by writing anonymous PL/SQL block but i dont want to go for that option. How to restrict input of NULL values ?
I want to put some line in my .sql file. The below is my issue :-
SQL>spool /tmp/Tablespace_Remove.ksh
SQL>echo >#!/bin/ksh---- I want to enter this line to my Tablespace_Remove.ksh
SQL>spool off;
create table a_user
(
u_name varchar2(30)
, grp varchar2(30)
)
;
INSERT INTO a_user VALUES ('abc', 'new');
[code].....
sql:
SELECT
a.grp
, a.g_tot
FROM a_user b
,
(
SELECT
[code].....
getgrpname is a function to get grp when I input the u_name
Now I want to create a proc to display the output from the sql when I give the p_u_name as input. I am thinking some thing like this:
create or replace procedure get_u_name_data (p_u_name IN VARCHAR2, rc_data OUT SYS_REFCURSOR) IS
IS
BEGIN
OPEN rc_data FOR
SELECT
a.grp
[code].....
how to print output in SQL developer
My need is to pass multiple values as single input parameter into pipelined function. For example - "2" and "3" are values of input parameter "t":
with data as (
select 1 as t from dual union all
select 2 as t from dual union all
select 3 as t from dual union all
select 4 as t from dual union all
select 5 as t from dual
)
select * from data where t in (2,3)
i have a stored procedure whose input parameter is a varchar2 datatype.i created this procedure for an interface and tibco would be calling my procedure by passing input parameters.my problem is when there is a input string with & (ambersand) then its not working.
even i tried to pass the parameter with & in TOAD, it asks me to enter value for string.look at the sample code below which i wrote for testing purpose:
procedure is:
create or replace procedure testproc(p_in in varchar2)
is
begin
null;
end;
i pass parameter as given below:
begin
testproc('abc & def');
end;
if i run above script, it asks me to input some string value as it sees & in the string. attached is the image that shows up in TOAD. if i run below script it works. but i dont know how many &'s will be there in the input parameter. hence i cant do. and also TIBCO cant modify the input paramter while calling the procedure.
begin
testproc('abc &'||'def');
end;
I am trying to ultimately as the title says separate a user input list into one column of entries. I am doing this through Cognos not a normal SQL editor which is what makes this a little harder to do. So far I have gotten that in general I can use the
SELECT 'First Entry' Asset FROM Dual Union
SELECT 'Second Entry' Asset FROM Dual Union
SELECT 'Third Entry' Asset FROM Dual
and this will give me 3 entries of data in one column. More can be added as long as the last statement doesn't have the union on it. So, the next step it would seem is to have a for loop combined with an if then or case statement that would find the number of entries and loop until we reach the number of entries and give me either SELECT 'First Entry' Asset FROM Dual Union or SELECT 'First Entry' Asset FROM Dual if we are on the last entry. I don't know the lingo to do this though. I have tried to get this to work with a simple test like cat, dog, horse, cow, pig, etc but it's frustrating that I can't get it to work. I can do all the individual steps I just can't seem to get it to work together. I have all the functions I need, I just need to the syntext to do a for loop along with an if then or case statement where the outcome is a valid select statement.
I want to insert data into three table
my first table is
firstemp
having columns
1.EMPID
2.NAME
3.STATUS
second table is
secimp
have same columns as of first table
third table is
thirdimp
columns are same as of first andsecond
I want to insert in Firsttable if EMPid=EMP_1h and insert in second table if empid=EMP_2u and insert into third table if empid=emp_3p
Is it possible to execute multiple sql files in one .bat file?for single sql file it is working properly.
.bat file
-------------------------------
sqlplus /nolog @ c: est01.sql
I need to split a column into multiple columns. The data in my column is separated by a Comma (,). But the data is dynamic and I could have any number of data separated by (,).
Quote:FOR Ex:
If COL1 contains
CRITERIA_ITEM_TYPE_ID, CRITERIA_ITEM_TYPE, DESCRIPTION, ITEM_DATA_TYPE
RESULT: should be 4 columns contains the values
CRITERIA_ITEM_TYPE_ID and CRITERIA_ITEM_TYPE and DESCRIPTION and ITEM_DATA_TYPE
Is COL1 contains
CRITERIA_ITEM_TYPE_ID, CRITERIA_ITEM_TYPE, DESCRIPTION
RESULT:
should be 3 columns contains the values
CRITERIA_ITEM_TYPE_ID and CRITERIA_ITEM_TYPE and DESCRIPTION
Just to let you know this new section in SQL*Plus FAQ wiki page: How to have optional parameters and default values in SQL*Plus_script.
View 1 Replies View RelatedI have two scripts (test1.sql and test2.sql) that need to be executed one after the other. I would like to call them both using a single command line:
sqlplus testuser/testpwd@testdb @c: est1.sql @c: est2.sql
This does not work
creating a test3.sql script that calls test1.sql and test2.sql is not an option.
I executed the following PL/SQL block in SqlDeveloper :
VARIABLE max_dept_no NUMBER
DECLARE
v_dept_name VARCHAR2(30) := '&p_dept_name';
v_max NUMBER(4,0);
BEGIN
SELECT MAX(department_id) INTO v_max FROM departments;
:max_dept_no := v_max + 20;
INSERT INTO departments VALUES (:max_dept_no,v_dept_name, NULL,NULL) ;
END;
/
And it gave the error : Quote:Error report:
ORA-01400: cannot insert NULL into ("HR"."DEPARTMENTS"."DEPARTMENT_ID")
ORA-06512: at line 7
01400. 00000 - "cannot insert NULL into (%s)"
The same code when executed in iSqlPlus gave no error.
NGFID;RECTYPE;RECNAME
25;7;POLES
PARENT
CHILD;1401;9845075;2020
817;8;SUPPORT
PARENT
CHILD
Required output:-
AREA_SRNO = 1
AREA_NAME = '3rivieres.export.ngf'
File :-mauri.export.ngf
NGFID;RECTYPE;RECNAME
257;7;POLES
PARENT
CHILD;1401;9845075;2020
8174;8;SUPPORT
PARENT
CHILD
Required output:-
AREA_SRNO = 2
AREA_NAME = 'mauri.export.ngf'....etc
CREATE TABLE NGF_REC_LINK
(
AREA_SRNO NUMBER(2),
AREA_NAME VARCHAR2(40),
NGFID NUMBER(20),
TABLENAME VARCHAR2(40),
PARENT VARCHAR2(200),
[code].......
find the ctl file (ngf_test.ctl) and modify the ctl file as per my requirement.
find the Test Case below.
--Creation of Table
create table tb1
(ID number(4),
event varchar2(20),
vdate date);
--Inserting Values into the Table.
INSERT ALL INTO tb1 (ID, event, vdate) VALUES (01, 'V1', '01-JAN-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V2', '02-FEB-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V3', '04-MAR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V4', '03-APR-2009')
INTO tb1 (ID, event, vdate) VALUES (01, 'V5', '05-MAY-2009')
[Code]...
--Selecting data from Table.
SELECT * FROM TB1;
ID EVENT VDATE
---------- -------------------- ---------
1 V1 01-JAN-09
1 V2 02-FEB-09
1 V3 04-MAR-09
1 V4 03-APR-09
1 V5 05-MAY-09
2 V1 01-JAN-10
2 V2 02-FEB-10
2 V3 04-MAR-10
2 V4 03-APR-10
2 V5 05-MAY-10
10 rows selected.
how can i display the data as below format using Oracle 9i SQL.
IDV1 V2 V3 V4 V5
--- ---------------- ------------ --------------- -------------- ------------
11-Jan-092-Feb-094-Mar-093-Apr-095-May-09
21-Jan-102-Feb-104-Mar-103-Apr-105-May-10
Example:
select * from emp
where empno in (123 234 345 124)
which are recommended Tool for load testing (for performance) on Oracle-J2EE, 3 Tier applications?
Is 'Oracle Application Test Suite' the best for such test where we can simulate numbers of users and their various actions?
Does it come with Oracle Database license or we have to buy it separately?
I'm looking for 3 simple things.
1) A reverse engineering tool that I can point to an Oracle schema and get a "baseline" script to re-create that schema from scratch, with decently formatted DDL files (1 per object) neatly organized in a directory tree (by object type) and called in the correct order. Icing on the cake would be an option to pass the tool a list of tables containing static data and get DMLs to populate (insert) those tables as part of the script.
2) a diff tool that I can point to a pair of Oracle instances (source and target) containing a given schema and get a "delta" script to alter the target schema so that it becomes identical to the source schema. If data loss occurs on the target instance (i.e. drop a column) I would like to find a warning comment inserted in the script (e.g. "-- Attention: data migration DML needed here?"). Icing on the cake would be an option to pass the tool a list of tables containing static data and get DMLs to update (delete, update and insert) the data in the target tables to become identical to the contents in the source tables *without* deleting and re-inserting all rows (or dropping, recreating and repopulating the table).
3) I would like the above two tools (that, as you will have recognized, are basic to putting your database design under version control) to be open-source, with a command-line interface and a vibrant community backing them.
I am working on APEX 4.1.1 on Linux server. I have created one application in which I have take a HTML region where i have written the following code:
<input type="text" id="APP_ITEM1" name="APP_ITEM1" />
I am able to see the text box in page, but not able to fetch the value from it.
I need to load data from a CSV file where one of the CSV values determines how many records should be inserted.
Example of the input data:
KEYWORD;2;REC1_COL1_X,REC1_COL2_X;REC2_COL1_X;REC2_COL2_X
KEYWORD;3;REC1_COL1_Y;REC1_COL2_Y,REC2_COL1_Y;REC2_COL2_Y;REC3_COL1_Y;REC3_COL2_Y
KEYWORD;4;REC1_COL1_Z;REC1_COL2_Z,REC2_COL1_Z;REC2_COL2_Z;REC3_COL1_Z;REC3_COL2_Z,REC4_COL1_Z;REC4_COL2_Z
If the KEYWORD is found, then the next value determines how many value pairs will follow, and therefore how many rows should be created in the affected DB table.
As a result I hope to achieve this:
SELECT Column1, Column2 FROM testTable
REC1_COL1_X,REC1_COL2_X
REC2_COL1_X;REC2_COL2_X
REC1_COL1_Y;REC1_COL2_Y
REC2_COL1_Y;REC2_COL2_Y
REC3_COL1_Y;REC3_COL2_Y
REC1_COL1_Z;REC1_COL2_Z
REC2_COL1_Z;REC2_COL2_Z
REC3_COL1_Z;REC3_COL2_Z
REC4_COL1_Z;REC4_COL2_Z
I learned how to import data using Oracle SQL loader for cases where one input line more or less matches a (new) row in a DB table.
The problem is that this connection errors when I try to connect using my SQuirreL client. My developers want to connecting using the SID or the SERVICE_NAME and by using the "New Method" syntax, not the "Old Method" syntax. According to the documentation the "New Method" syntax works with the SERVICE_NAME or the SID. The "Old Method" only works with the SID.
# Host name is vmwwin7634.na.SAS.com
# SID is sting2
# SERVICE_NAME is sting2.na.sas.com
PROBLEM using SID errors ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2
THIS WORKS using SERVICE_NAME ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com
I am using SQuirreL Client version 3.4.0
# Here is the tnsnames.ora entry on the server.
STING2 =
(DESCRIPTION =
[code]...
# In this documentation it says, "On new syntax SERVICE may be a oracle service name or a SID."You can find this on the orafax wiki under JDBC#Thin_driver.
# I was able to connect with the "old method" using the SID only, SERVICE_NAME errors jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2.na.sas.com
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2 (this works)
# "New Method"
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com (this works)
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2 (this errors)
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
can we use oracle client version to create a database in that server.
View 3 Replies View RelatedI have new virtual UNIX machine and I installed oracle client on /usr/lib/oracle. Also I have a oracle database and I am able to connect to this database from my desktop sql developer.
So now I am trying to connect from new UNIX machine. Where I created tnsnames.ora file under /usr/lib/oracle/network/admin and before connecting did export the following
export TNS_ADMIN=/usr/lib/oracle/network/admin
export ORACLE_HOME=/usr/lib/oracle/
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$HOME/bin:/sbin:$ORACLE_HOME/bin
export ORACLE_SID=VFIODSD1
when I try
# sqlplus
username :xxxxxxx
password : xxxxxxx
ORA-12545: Connect failed because target host or object does not exist. Not sure what I missed here. using same tns file I am able to connect from sql developer on windows.
Can i install Oracle 10g Client 32 bit on our Windows Server 2008 R2 64 bit?
View 1 Replies View RelatedI need to install Oracle client to get latest sql plus working on client pc as the problem is, i am not able to find out where i can download this , i just need the sql plus as i am not able use many commands because when i installed oracle forms 6i client tool , sql plus 8.0 got installed.
View 4 Replies View Relatedresolve issue while modified the user function code for returns the values as timestamps
---function code
create or replace
function fun_test_timestamp(P_HOUR varchar2) return varchar2
is
sql_stmt varchar2(1000);
begin
[Code].....
Input:-
select fun_test_timestamp('5') from dual;
Output:-
SELECT CURRENT_TIMESTAMP - INTERVAL '5' HOUR FROM DUAL;
Modified Fun Code:
create or replace
function fun_test_timestamp(P_HOUR varchar2) return timestamp
is
sql_stmt varchar2(1000);
[Code]...
Input:-
select fun_test_timestamp('5') from dual;
Output:-
ORA-00911: invalid character
ORA-06512: at "NETVERTEXTRUNK.FUN_TEST_TIMESTAMP", line 8
00911. 00000 - "invalid character"
*Cause: identifiers may not start with any ASCII character other than letters and numbers. $#_ are also allowed after the first character. Identifiers enclosed by doublequotes may contain
any character other than a doublequote. Alternative quotes (q'#...#') cannot use spaces, tabs, or carriage returns as delimiters. For all other contexts, consult the SQL Language Reference Manual.
*Action:
I want to use BR*Tools to administer an Oracle database. I have installed BrGUI local, set the JAVA Home variable and edited the brgui.properties file accordingly.I am able to login, but the menues are mising. The login screen is incomplete.
View 5 Replies View RelatedI usually work in oracle using the different editors like toad, plsql developer etc. I felt command line is good utility because of various supporting points. I am not sure what kind of command line tools is available/used. I am using pretty straight command line
(run->cmd, then enter username and password).
The best command line tools available. What is generally used command line tools.
The version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi. for Unix AIX 5
I install the ODBC Driver Manager, Basic Instant Client, ODBC Instant Client packages (libsqora.so, odbc_update_ini.sh).
The error:
[oracle@d4 oracle] $ isql OracleODBC-10g user passtemp -v
[01000][unixODBC][Driver Manager]Can't open lib '/home/oracle/instantclient_10_2/libsqora.so' : file not found
[ISQL]ERROR: Could not SQLConnect
Configuration
odbcinst.ini
[Oracle10gODBCdriver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /u01/app/oracle/product/10.2.0/db_1/lib/libsqora.so
Setup =
FileUsage =
CPTimeout =
CPReuse =
The documentation explic with exists the file libsqora.so.10.1 but not exists in the ODBC Instant Client packages.
I applied ln -s libsqora.so.10.1 libsqora.so but the connection not function
odbc.ini
[oradns]
Application Attributes=T
Attributes=W
BatchAutocommitMode=IfAllSuccessful
CloseCursor=T
[code].......
I have Oracle 7 database on Server1. I need to connect this using Oracle client from windows XP.
I have downloaded Oracle client 3.0 and when I am trying to connect it saying "Unable to connect: Unsupported Oracle version".