SQL & PL/SQL :: Assign The End Date

Dec 19, 2011

I had as source a set of actions where I have to assign the end date, the general rule is that each action has the same end date to start date of next action, if there is no next action it will be assigned the default('35001230').

I can do the assignment with the date of order:

NVL (LAG (DAT_INI) OVER (PARTITION BY ID_CLIENT DAT_INI ORDER BY DESC, DESCCOD_SEVERITY), TO_DATE ('35001230 ',' YYYYMMDD ')),

However, I have an exception to the rule, if the action have COD_SEVERITY = 3 or 4 and the next action have the COD_SEVERITY = 3 or 4, the end date will be for the previous day. If in the same day I have actions with COD_SEVERITY 3 and 4, the end date of actions with COD_SEVERITY = 3 will be DAT_INI -1 and the action with COD_SEVERITY = 4 will have the same date of the next action or DAT_INI -1 if the next action had COD_SEVERITY = 3 or 4

Input
ID_CLIENTDAT_INICOD_SEVERITYVALUE
1201112011100
1201112013100
1201112044101
1201112073100
[code].......

Output except
ID_CLIENTDAT_INICOD_SEVERITYVALUEDAT_END
120111201110020111201
120111201310020111203
120111204410120111206
120111207310020111213
[code]........

The source
SELECT 1 as ID_CLIENT, 20111201 as DAT_INI, 1 as COD_SEVERITY, 100 as VALUE FROM DUAL
UNION ALL
SELECT 1 as ID_CLIENT, 20111201 as DAT_INI, 3 as COD_SEVERITY, 100 as VALUE FROM DUAL
UNION ALL
SELECT 1 as ID_CLIENT, 20111204 as DAT_INI, 4 as COD_SEVERITY, 101 as VALUE FROM DUAL
UNION ALL
[code].......

View 1 Replies


ADVERTISEMENT

SQL & PL/SQL :: Declare Date Variable And Assign It To Current System Date

Apr 19, 2011

Write a program to declare a date variable and assign it to the current system date. Depending on the day of the month the program should print the following:

If day is 1-10 then print "It is day<day number> of <month name>. It is early in the month".
If day is 11-20 then print "It is day<day number> of <month name>. It is the middle of the month".
If day is 21-31 then print "It is day<day number> of <month name>. It is nearly the end of the month".

For example, if the day is November 30, then print "It is day 30 of November. It is nearly the end of the month".

View 9 Replies View Related

PL/SQL :: How To Assign Value To Parameter

Mar 20, 2013

I have written this code, its throwing error.

begin
declare tmdate DATE;
select TO_DATE(TO_CHAR(MAX(DATERANGE),'DD-MON-YYYY')) into tmdate from table_check_date_range;
dbms_output.put_line(tmdate);
end;

View 10 Replies View Related

SQL & PL/SQL :: Display Date Ranges In One Column As Separate Date Periods (start And End Date) In Two?

Jun 1, 2010

I'm trying to work out how to take a table like this:

IDDate
12502-Feb-07
12516-Mar-07
12523-May-07
12524-May-07
12525-May-07
33302-Jan-09
33303-Jan-09
33304-Jan-09
33317-Mar-09

And display the data like this:

IDPeriodPeriod StartPeriod End
125102-Feb-0702-Feb-07
125216-Mar-0716-Mar-07
125323-May-0725-May-07
333102-Jan-0904-Jan-09
333217-Mar-0917-Mar-09

As you can see, it's split the entries into date ranges. If there is a 'lone' date, the 'period start' and the 'period end' are the same date.

View 13 Replies View Related

Forms :: Expiry Date To Automatically Show A Date 15 Years After Initial Date

Apr 12, 2010

I have a two date fields in my form; valid from date and expiry date.

Currently my valid from date has an inital value property of $$date$$ which automaitcally brings up todays date.

I need my expiry date to automatically show a date 15 years after this date?

View 8 Replies View Related

Forms :: Assign Employees To Jobs

Oct 12, 2011

Assign employees to their jobs in consideration the maximum number of employees to each jobs is 5 employee plus each job has own the maximum number of employees

we need the maximum number of employees for each job 5 to be variable when need to change this maximum for certain job , change this number from database (form the from of job ) not form code )

tables
emp
emp_no
name
manager
hiredate
salary

job
job_no
job

you can add tables or attributes to tables to complete you business.

View 10 Replies View Related

SQL & PL/SQL :: How To Assign NULL To Table Type

Jan 5, 2011

Let me know in PL/SQL how can we set a Table Type record to NULL?

Also, if .delete makes it NULL?

View 1 Replies View Related

SQL & PL/SQL :: Assign Sequence Name During Table Creation?

Aug 22, 2011

is it Possible to Assign the Sequence Name During the Table Creation.

View 1 Replies View Related

PL/SQL :: Assign Partitioned Index To Primary Key

Jan 25, 2013

create table mypart(a number, b number, c number, p_key number) PARTITION BY RANGE (p_key)
( PARTITION p0 VALUES LESS THAN (18),
PARTITION p1 VALUES LESS THAN (29),
PARTITION p3 VALUES LESS THAN (MAXVALUE)
)  ENABLE ROW MOVEMENT;

create index idx_mypart on mypart(p_key,a,b)

I want to create primary key on this table that will use the local partitioned index idx_mypart

can I do that ?

alter table mypart add constraint pk_mypart primary key using index (idx_mypart)

above syntax gives error

basically the primary key should make use of the local partitioned index.

View 4 Replies View Related

Forms :: Assign Multiple Values To Variables?

Mar 31, 2012

assigning values to a particular variable that i need for my button trigger. I Understand that you can assign multiple values to a variable that has a varchar or char data type....is there a way to assign multiple values to a variable that has a 'number' data type?? I need this for my 'where' clause

declare
usergrade varchar(4) := 'pass';
user_unitcode number(6) := ;--needs three unit codes to equal pass

View 1 Replies View Related

Server Administration :: Assign User Roles To Uses?

Aug 19, 2011

Is there any default way to assign user roles to uses ?

Suppose I want assign to user different roles to different users on views, tables etc.

I wan to implement Access control list & Access request objects (ACL/ARO).

View 7 Replies View Related

Forms :: How To Assign Value To Parent From Child Form

Feb 29, 2012

I have two forms, FormPARN, FormCHLD.

One Text item is there in FormPARN, near to that Text item, Button is there.While clicking Button FormCHLD will be opened. Inside the FormCHLD, i will do some calculation and i need to store the result in FormPARN's Text Item.

How can i do it?

View 10 Replies View Related

PL/SQL :: Assign Count Of Committed Rows To Variable

Sep 4, 2012

from within plsql i am doing

insert into t_target (...) select (fiels,fields,fiels) from sourcetable;
commit;

i want to capture number of rows committed and assign it to a variable or insert it into a table, i can not rely on count of source table or t_target because both those tables are changing through out of the day/ data are being inserted and removed from those tables. is this possible

View 2 Replies View Related

Forms :: How To Assign More Than One Company ID To Temp Field On B1

May 19, 2013

I have two blocks in Form (Forms 10g) .On the Block B2 I have populated the Company Id by using the PLSQL Table.Now I selected more than two company ID from that Block ...I just want to keep the Company ID in the Temp Field on the Block B1.which I have selected on the Block B2. how can I assign more then one Company ID to That Temp Field on B1.

View 8 Replies View Related

Assign Different Profile For Oracle Database Users According To Their Job Functions

Apr 10, 2011

it is a good practise to assign different profile for oracle database users according to their job functions.what could be the resons for that?

View 3 Replies View Related

PL/SQL :: Assign Number To Row Based On Condition Analytic Function

Oct 24, 2013

Oracle 11g databaseidval1val2100a110b120c200a220b 
WITH input AS
(SELECT 1  id

[Code].....

input; Output:idval1val2assigned_number100a0110b0120c2200a0220b1 The dense numbering sequence should be assigned to each row based on id and val1 column. For a given Id, the numbering only starts after val1 > 1 till then the assigned_number will be zero.

View 1 Replies View Related

PL/SQL :: Dynamically Assign Values Of Any Column Of Row Type Variable

Nov 12, 2012

need to dynamically assign value of each column of a row type variable:The example is like that:

Table "Student_list" is as follows:
---------
COL1 VARCHAR2(50),
COL2 VARCHAR2(50),
COL3 VARCHAR2(50)
[code]....

Is there any work around where i can dynamically built my variable or table.column name and assign a value to it?

View 7 Replies View Related

PL/SQL :: Dynamically Assign Values To Different ROWTYPE-Columns By Ruletable

Jul 31, 2013

how to assign values from a "rule table" to a rowtype-variable.  The ruletable contains values for different columns in different tables.Now i need to assign those given values for given columns out of that rule table to the equivalent column in a rowtype-variable. 

    CREATE TABLE TBRULES
        (
            TABLE     VARCHAR2(50 BYTE)
        ,    COLUMN    VARCHAR2(50 BYTE)
        ,    VALUE     VARCHAR2(200 BYTE)
        );
  [code].....

View 15 Replies View Related

Application Express :: Assign A Value 1 To Page Item / Whenever Key Is Pressed

Jan 11, 2013

I need to assign a value 1 to a page item whenever key is pressed:Here what I did:

1. Created a item P1_SHOW
2. Created a dynamic action
Event : Key Press
Selection Type : Item(s)
Item(s) : P1_SHOW

True action: pl/sql
:P1_SHOW := 1;

View 2 Replies View Related

Server Administration :: How To Assign Size For Disks In Diskgroup

Mar 3, 2012

you have given 500gb of harddisk. how will u implement the size or how to assing the size for disks in the diskgroup.give me the best practice that is used in production

View 1 Replies View Related

PL/SQL :: Use Two Temporary Tables To Assign Color To Data Results?

Jul 16, 2012

Example Tables and Data:

I have 5 Courses, each course has 2 assignments.

with Courses as (
select 100 courseID from dual union all
select 200 from dual union all
select 300 from dual union all
select 400 from dual union all
select 500 from dual
), Assigns as (

[code]...

I need each assignment to get a color assigned to it according to it's courseID. So my theory is that I'd have a temporary table with a list of colors; each courseID would get assigned a color but my question is how do I assign each courseID a color without anything to join the temporary table on? Once each courseID has a color, I'd join in Assigns so that each assignment has a color associated with it according to it's courseID.

--Color table with 6 colors
with Colors as (
select 'red' color from dual union all
select 'blue' from dual union all
select 'yellow' from dual union all
select 'green' from dual union all
select 'purple' from dual union all
select 'teal' from dual
)

View 8 Replies View Related

JDeveloper, Java & XML :: Convert XML Message To CSV And Assign It To (anyType) Element

Mar 28, 2012

I have a requirement that is to convert XML message to CSV format and assign this to a "anyType" element. How would I convert to CSV?

View 1 Replies View Related

PL/SQL :: Assign Variables To User Defined Data Type Within Package

Oct 16, 2013

I have this requirement, I have a following Record type within a package, instead of selecting datas into this i need to assign variables to this record type  

TYPE xx_delivery_detail_rectype IS RECORD (      p_delivery_id                    NUMBER,      p_ultimate_dropoff_location_id   NUMBER,      p_creation_date                  DATE,      p_last_update_date               DATE,      p_container_name                 VARCHAR2 (30),      p_inventory_item_id              NUMBER,      p_shipped_quantity               NUMBER,      p_shipment_line_id               NUMBER   );     TYPE xx_delivery_table_rectype IS TABLE OF xx_delivery_detail_rectype      INDEX BY BINARY_INTEGER; 

Say i have variables to assign to all the values within the record type, How do i do it within the package

View 4 Replies View Related

Application Express :: Assign To Item List Of Value According To Contents Of Other Fields

Oct 18, 2013

Let me explain, I have two items in my page, the first is not required, if it is null the second field is a value list based on selection A (select from A. .. A. .. where . A..) but if the field is not null then the list of values ​​of the second field is based on the selection B (Select B from B where B. ..). 

I create a dynamic action on the event "change" of my first field,  on the "true action" I tried this: 

declare  vva_ternum Varchar2 (3): = null;Begin   APEX_ITEM.SELECT_LIST_FROM_LOV (2, : P26_TERNUM, 'LOV_RSPRODUIT_TERRITOIRE'); End;  

But it does not work!! 

View 5 Replies View Related

Application Express :: JavaScript Assign Value Is Not Visible To Page Process

Aug 21, 2012

I have a page (16) and a tabular form when the user select the check box I update the zero page item

$x('P0_REPORT_REFNO').value=l_value;

this works fine till this point now i have a button will calls page 8 and pass the parameter to page 8 P0_REPORT_REFNO is displaying the selected value but passing null to page 8.I am running the application on apex.oracle.com

View 3 Replies View Related

Forms :: Trigger Form When-new-record-instance To Assign Values For Item

Mar 28, 2011

I am developing form, but there is issue when I Press F11 to query data.I make trigger form when-new-record-instance to assign values for item.But when i Press F11 then Block no clear.

View 1 Replies View Related

Server Utilities :: Assign Numeric Value Generated From Sequence In Control File?

Dec 22, 2003

I have a control file like following:

LOAD DATA
INFILE *
INTO TABLE member
REPLACE
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
(
control_id,
name,
address
)

problem is that control_id value is not in data file and I have to assign to each row the same value generated from sequence or from unix variable.

For example, after I run sqlldr, I have to have records in the table like following:

control_id name address
---------- ---- -------
1847 Charlie 250 yonge st
1847 Peter 5 Brookbanks dr
1847 Ben 123 King st
.
.
.

How do I do that?

View 29 Replies View Related

Application Express :: How To Assign Concatenated Output To Item On Page Load

Dec 27, 2012

I have a table that reads something like this

City Route
NewYork 2
NewYork 4
NewYork 5
London A
London B
Paris X1

I want to assign Routes (concatenated) to an item on page load... as an example for NewYork it should read like this

P2_ROUTE = 2, 4, 5

I am looking to do the above using query, something like this

select (concatenated route)
from Table_A
where
City = :P2_City

how to concatenate variables.?

View 2 Replies View Related

Reports & Discoverer :: Create A Procedure In Program Unit And Assign Output To A Field In Report?

May 8, 2013

i just want to know how can i create a procedure in the program unit and assign the output to a field in the report.

View 7 Replies View Related

Server Administration :: Creating A New Tablespace With Datafile / Assign Users To Current Tablespace

May 27, 2011

i have a tablespace which contains 121 datafile(max limit reached) as a dba what we have to do?

creating a new tablespace with a datafile and assign the users to the current tablespace which i created now.iif the above process is correct,after some time the tablespace which was filled up got freed up.now can i give the access to the users previous (i.e. freed up tablespace) and current tablespaces

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved