I have query in that query i should display the number of row. I have tried to select the row num but when i use it the data will be duplicated. I have found something that related to use temporary table, or subquery but all of them will not work because the query depends on many tables and if i use temporary table filling the table and then reading from it will take too long time.
View 11 Replies
My requirement is I have to get a sequence no generated for 2 set of groups. Here is an example to better resolve it.
Gr1
Seq Data
--------------
1 Data1
2 Data2
3 Data3
GR
Seq Data
--------------
4 Data1
5 Data2
We have a view that shows the all the data that we expect, so we created a report to show that data, the report worked, then all of a sudden the report stopped showing all the data. (we did have a server move)I checked the view and the all the data is there....
I have created a new report based on the view but it does the same thing, it doesn't bring all the data up (i get very old data), there are no conditions or anything.
other tables and views seem fine. i have recreated the view and i still have the same problem.
how do i get runtime sequence number at report level.
View 1 Replies View RelatedIn my form I have a submit button, when i click on it a sequence number to be generated and displayed in a text box.
I have created a sequence and tried inserting into table, it works fine however it's not getting displayed in form.
Note: Tried giving sequence.sequence_name.nextval in initial value of the text box, didn't work showed FRM-11324 error.
--When button pressed--
DECLARE
v_seq number(20);
BEGIN
select seq_name.nextval
into v_seq
from dual;
[Code]...
I have a requirement like this, There is a temporary table with one number column. This column would be updated in between pages trigger. In the header I want to display the value from this temporary table on each page. I tried this by putting a frame and displaying the values, but it displays same value for all the column.
The table is properly getting updated in between pages trigger. I just want to know how to print the refreshed value in the header.
I have Report in RB 10g , it is showing the logo in PRINT View but when I am running the report in the paper layout it does not showing the logo over there
View 1 Replies View Related When I am printing a report in Delimited report format using the default delimiter "Tab", the heading lables is getting printed for all rows( which is fine ) and extra rows of heading labels is getting printed.
Ex:
If I have a heading labels Deptno, Dname and Loc and related data which I print in delimited format, the output will be as follows:
Deptno Dname Loc 10 Accounting NewYork
Deptno Dname Loc 20 Research Dallas
Deptno Dname Loc 30 Sales Chicago
Deptno Dname Loc 40 Operations Boston
Deptno Dname Loc Deptno Dname Loc
Other report formats are working fine.
The same report in different application server environment is working fine.
I have to create the matrix report which shows calender. Looks Like this.
View 14 Replies View RelatedI'm having a report and I want to add sequence. My report is group by type. I want the sequence to restart for every new group. Lets say a report having name of students of different classes and grouped by class the result should look like this:
class A
1.student1
2. student2
class B
1.student3
2.student4
what I did is created a summary column with count function with source student but the sequence did not restart when group is changed .
i am using oracle developer 6i report builder i required this type of query
example
if (:page number LIKE '1')
then
srw.set_text_color('darkred');
end if;
return (TRUE);
end;
but page number is not my table database item how can i use builtan page &<pagenumber> use for conditional format.
Is there any way could alter the sequence depending on specific condition to start with 1 in the form builder?
i wanna to reset the sequence to 1 whenever the month change.is there any way?
Could i make detail block invisible and whenever button pressed i will display the block? I want to put the where clause for that block in the button and if the button did not pressed i want to display nothing in the detail block?
I want to insert same sequence number for repeated data else new sequence.
my data is as below
EMP_NAMEEMP_INV
PrasCTI
PrasCTI
ShariqWitness
KateCTI
ShariqAssisted
ShariqWitness
the first 2 record are same Pras CTI and Pras CTI so i want my sequence generate value once as below
1 Pras CTI
1 Pras CTI
2 Shariq Witness
3 Kate CTI
4 Shariq Assisted
2 Shariq Witness
Shariq and witness are repeating so same sequence number but Kate CTI occured once so nextval of sequence
How can i acivee it
CREATE TABLE EMP_INV
(
EMP_NAME VARCHAR2(100 BYTE),
EMP_INV VARCHAR2(100 BYTE)
)
Insert into EMP_INV
(EMP_NAME, EMP_INV)
Values
('Shariq', 'Witness');
[Code]...
I have a report created in Reports6i. I have two fields at the bottom
1.Page Total
2.Voucher Total
I do not want to print the Page Total if the total number of pages = 1.
How can I achieve this?
I have a value 233560.66 but in report its showing 233560.67 using format NNNGNNNGNNNGNN0D00 but when i remove format it shows 233560.665 but i want result 233560.66
View 2 Replies View RelatedDuring the Report Development for the Invoice Print the Page Number is required to display for the each Page like 1 of 3.The Report have the parameter of From Invoice Number and To Invoice Number. The Page display the Current page and Total Page. How to Split the Invoice Number wise page Number in the Report.
Presently
Invoice No Page No.
14001 1 of 4
14002 2 of 4
14002 3 of 4
14003 4 of 4
Requirement
Invoice No Page No.
14001 1 of 1
14002 1 of 2
14002 2 of 2
14003 1 of 1
I want to display a boilerplate item and their value only on the last page.
The item is under frame . So print object at last page doesn't work.
I could find the page number by the use of srw.get_page_num(n).
But not sure how to find the last page number.
I wanna convert the amount of money from number to string such as 144.5 to be one hundred forty four point five is there any function or i have to write my function? How could i put new line in the string?
for example if i have 'SAB Bank' || 'Riyadh'
but i want SAB bank to be displayed in line and Riyadh in line.
I just want to know whether we can mask salary column of number datatype into text ,like we used to_char(to_date(<column_name>,'j'),'jsp') in sql? for example
Name Salary
SMITH 800
to
Name Salary
SMITH EIGHT HUNDRED
MY problem is in my reports i wish to have filter number of records on my requirement , when i call reports from form then ask me that how many number of records you want..
View 3 Replies View RelatedI would like to create a report specifying to few page numbers. Currently the report generates with all data for say e.g. 300 pages. I want this(original_300pages) report also i want copy of the same report with only first 20 pages.
View 1 Replies View RelatedI am working on the Reports Builder 10.1.2 at the Database Oracle 11.2.0. I have developed a report , which shows the page number at top right cornet. So I have selected a field and set the Source as "page Number". While I run the report through Reports Builder,it is properly displayed the page number. But while I copied the report to unix and run through "$ORACLE_INSTANCE/config/reports/bin/rwrun.sh", the page number is showing as 65536 . By changing the Source of the field to "Total Page" or "Physical page Number" make no difference.Every times It is showing the page number 65536 in the pdf output of the report.
View 6 Replies View RelatedWhen running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record.
View 3 Replies View RelatedIn Report it is possible to set the maximum rows to fetch to be a number e.g. 1+.Is it possible to use a number that is selected from another query? When I try to do this i.e. I put in the field num_lines or :num_lines I just get invalid number
View 10 Replies View RelatedRecently I am facing a problem while working with Oracle reports 2.5.
My requirement is:
there is a report in which there are 5 columns right now. Now what i want is, whenever a condition will satisfy , a new column should be also display in that report otherwise it must be stay as it is.
Previously : a b c d
Now if a=1 : a b z c d
else
a b c d
where a,b,c,d,z are columns.
When i'm sorting on a calculated field i'm getting the following error:
ORDER BY item must be the number of a SELECT-list expression
I want to print two record of emp table in same line number in tabular format report.
For example if i have emp table and I want to print empno,ename,sal columm only,In tabular format report, Two record should print per line. so If emp table have 14 record report should be printed on 7 rows.
so the output in print preview should be like this
EMPNO ENAME SAL EMPNO ENAME SAL
------ ---------- ----------------------------------------------
7369 SMITH 800 7499 ALLEN 1600
7521 WARD 1250 7566 JONES 2975
7654 MARTIN 1250 7698 BLAKE 2850
.
.
.
.
I have the following Union All query. It throws the following error in SQL plus
ERROR at line 27: ORA-01789: query block has incorrect number of result columns
After doing some google for the above error it suggests there are incorrect number of columns in the Union All query.I could not figure out the exact location well SQl Plus says error is on line 27 at the first opening bracket like
(Select distinct c.contact_code
Following is the SQL query
Select
tbl_contact.contact_code,
contact_title
||'.'||contact_name contact_name,
contact_address,
[Code] ......
How to convert exponential number into pure number while writing on excel using report builder.Excel only takes 15 digit as pure number and remaining number it converts into zero or you can say in exponential form.
View 4 Replies View Relatedhow can convert number from Arabic to English in oracle report builder
View 2 Replies View Related
