Performance Tuning :: Why Different Elapsed Time In Oracle9i And 10g For Same Query
May 5, 2011why different elapsed time in Oracle9i and oracle10g for the same query ?
View 2 Replies
ADVERTISEMENT
Performance Tuning :: SQL Ordered By Elapsed Time
Feb 2, 2013Elapsed Time (s)CPU Time (s)Executions Elap per Exec (s) % Total DB TimeSQL IdSQL ModuleSQL Text
3,263 32 1 3263.49 2.79 3ta0ms19fvgds httpd.exe SELECT CASE WHEN COUNT >= 1...Elapsed
6,360 164 2 3180.17 5.44 51jx99dm0swv7 cpm_srvscript@ahcaxasmil1b (TNS V1-V3) SELECT /*+ CCL<PFT_GET_RP...
On AWR, I see two script that are out of ordinary, and I want to make sure that I interpret them correctly.
1) "Elap per Exec (s)" shows 3263.49 with 1 "Executions".
2) "Elap per Exec (s)" shows 3180.17 each execution with 2 "Executions".
Does this mean that this script ran for ~ 54 minutes (3263.49 / 60 seconds) for 1 "Execution" and ~ 53 minutes (3180.17 / 60 seconds) per each execution? I need to understand "Elapsed Time (s),CPU Time (s),Executions ,Elap per Exec (s), % Total DB Time" represent.
Performance Tuning :: SQL Ordered By Elapsed Time And SQL Module?
Feb 24, 2013Elapsed Time (s) CPU Time (s) Executions Elap per Exec (s) % Total DB Time SQL Id SQL Module SQL Text
2,423 1 3,919 0.62 1.83 gt49gg0fnc5x8 srv_dr@ahs (TNS V1-V3) UPDATE /*+ CCL<OENDB_FILE...
2,227 14 1 2227.16 1.68 bggfx8a04prj9 SQL*Plus select * from (select n.source...
.........
On [SQL ordered by Elapsed Time], [SQL Module] shows an indication that a SQL was executed by which process (i.e. srv_dr@ahs)outside of SQL*PLUS.If [SQL Modeule] shows as [SQL*Plus], does it mean the query was run in SQL*PLUS manually or directly?I have the SQL ID. How do I find out who, how, and exactly what time it was run?
Performance Tuning :: Elapsed Time Not Accounted In Tkprof File
Jan 13, 2011find the attached tkprof'ed file of session
I started the trace after the query started (upon user's complaint)
However even after tracing the session for more than 30 minutes I am not geeting where the 30 minutes are accounted in this file
Performance Tuning :: Elapsed Time In Trace File Output
Nov 16, 2011I executed a query which executed quickly (1.7 seconds) but since its output took time in displaying on the console the time shown by 'set timing on was 39.5 seconds
also I took trace (tkprof) for the same.My query is why the timings under 'Total Waited' (43.19 and 1.69) are not added to the elapsed time 1.83 seconds
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.06 0 10 0 0
Fetch 758 0.03 1.77 0 0 0 11345
------- ------ -------- ---------- ---------- ---------- ---------- ----------
total 760 0.03 1.83 0 10 0 11345
[code]....
Performance Tuning :: Why Elapsed Time Changed While Execution Plan And Stats Remains The Same
Jun 4, 2010attached query giving consistent execution plan but different timings across run
SELECT /*+ INDEX (CRT CRT_CUN_FK_I)*/
DISTINCT odr.dve_id
FROM company_requirements crt, orders odr, lelo_products la_pct
WHERE crt.qtn_cun_id = 10035637--10000021--10035667
AND crt.ID = odr.crt_id_quote_implemented
AND NVL (odr.cancellation_date, '31-Dec-9999') = '31-Dec-9999'
[code]....
we have 4 databases, 2 on each servers, such that db1 and db2 on server1 and db3 and db4 on server2
refer count of the records for column of biggest table in the query, taken on all 4 databases (The column is nullable)
select count(*) from company_requirements crt WHERE crt.qtn_cun_id = 10035637
db1 = 73335
db2 = 89073
db3 = 81182
db4 = 82936
First I executed the query on db1 and db2 while there wasn't any user logged on to the system
db1
**********
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.06 0.08 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 17.47 473.39 85704 1508102 0 0
[code]...
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
db file sequential read 85704 0.31 460.55
latch free 1 0.00 0.00
SQL*Net message from client 1 14.98 14.98
[code]...
Why the elasped time changed when data and plan hasn't changed at all? Also why the plan has different stats for round 1 and 2 on db1 and db2?
I ran it 2 times each round each database so hard parsing shall not be issue.Also why the number of rows accessed are different in db1,db2 and db3,db4 especially for step1 when count of crt.qtn_cun_id is similar?
In fact when the query was taking long I was the only user on the system Also I used hard coded value (no bind variables at all)
I checked num_rows, distinct keys as well which are quite similar across all 4 databases Also no stats where gather during the query execution
What I should have checked or monitored?
Performance Tuning :: Query Running For A Long Time In Second Schema
Apr 27, 2012I have a Query(report) which is running in <5 mins in one Scheme, where as the same is running for a long time in second schema. I have identified that an Index is scanning for more than 2000 Millions of records in second Schema, but this is scanning only 440 Millions in First Schema and hence it is fast. I am expecting the same to be done in Second schema.
I have verified the following
All records in tables in 2 schemas are same.
All indexes are same
Analyzed the tables
Gathered Histogram on all the columns as per the first schema.
But now i still have the same problem, don't know what could be the problem.
Table_nameNum_RowsBlocks
PRPSL_LST_T5866107159
PRPSL_WKFLW_ACTVTY_T5829904030
ITEM_CHR_VAL_T5134340104049020
ITEM_RGN_ASSN_T8571220137215
Also attached 2 screen shots of OEM Plans..
Performance Tuning :: Cost Of Query Is Brought Down But Taking Same Time
Sep 1, 2010For an query, cost was 16Lakhs and was taking 30min, I brought down the cost to 1.5lakhs, but still it is taking 30min.
There were many outer joins and same table has been Used(FROM clause) 5 times in the query. I have introduced WITH clause, and brought down the cost.
Performance Tuning :: Select Query Taking Time Even After Using Parallel Hint?
Sep 25, 2013 select
serialnumber from product where productid in
(select /*+ full parallel(producttask 16) */productid from producttask where
startedtimestamp > to_date('2013-07-04 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and startedtimestamp < to_date('2013-07-05 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and producttasktypeid in
[code]....
Explain plan output:
Plan hash value: 2779236890
-----------------------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name| Rows| Bytes | Cost (%CPU)| Time| Pstart| Pstop |
-----------------------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT || 1 | 29 | 9633M (8)|999:59:59 |||
|* 1 | FILTER |||| ||||
| 2 | PARTITION RANGE ALL || 738M| 19G| 6321K (1)| 21:04:17 | 1 | 6821 |
[code]....
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter( EXISTS (<not feasible>)
4 - filter("PRODUCTID"=:B1)
5 - filter(ROWNUM<100)
12 - access("MODELID"=:B1)
[code]....
Note: - SQL profile "SYS_SQLPROF_014153616b850002" used for this statement
Performance Tuning :: Standard SQL Query To Benchmark Oracle DB Response Time?
Oct 26, 2013I wish to run a SQL query and measure elapsed time, then compare the values to other Oracle DBs from other companies. That will give me a feeling if our DB performs well.For example in UNIX world, you can create a random 4GB file to measure throughput I/O and compare the values (for example 4MB/sec).
What's the simplest way to compare DB response time from forum members to our own DB? I don't need 100% accurate numbers.
Performance Tuning :: Query Taking High CPU And Execution Time In Oracle 11gR2
Dec 24, 2012The below query is taking high CPU almost 98% and longer time to execute.
SELECT ancestor,
Max(D.alarmstate) ALARMSTATE,
Max(D.sialarmstate) SIALARMSTATE,
Max(D.uncralarmstate) UNCRALARMSTATE,
Max(M.commstate) COMMSTATE,
Max(M.nncommstate) NNCOMMSTATE,
Max(M.servicestate) SERVICESTATE,
Max(M.abnormal) ABNORMAL,
CASE
[code]....
Server Administration :: Elapsed Time In AWR Report?
Nov 7, 2011I have an AWR report based on two snapshots one an one hour time window, under the "SQL ordered by Elapsed Time" section, there is a query having Elapsed Time = 7012 seconds, which is almost two hours, how is this possible? I have been told that this i aggregate value of all sessions.
View 3 Replies View RelatedHow To Get Total Elapsed Time Of Multiple Queries
May 7, 2013I am executing below two SQL's at a time in a .sql file and I want the total execution time of these two queries:-
set timing on;
select 1 from dual;
select 2 from dual;
The output of the above sql file is returning the results like below which is expected:-
1
----------
1
Elapsed: 00:00:00.01
2
----------
2
Elapsed: 00:00:00.00
I want the total execution time of the two SQL queries at a time, I mean post execution of the two queries I want to know the total execution time, in this case is execution case will be 00:00:00.01.
Performance Tuning :: Fragmentation Can Reduce Performance In Query Times
Jun 16, 2010I have a question about database fragmentation.I know that fragmentation can reduce performance in query times. The blocks are distributed in many extents and scans process takes a long time. Oracle engine have to locate the address of the next extent..
I want to know if there is any system view in which you can check if your table or index has high fragmentation. If it's needed I will have to re-create, move or rebulid the table or index, but before I want to know if the degree of fragmentation is high.
Any useful script or query to do this, any interesting oracle system view?
Performance Tuning :: Sql Taking More CPU Time?
Nov 23, 2010I have one query in my production which is taking more CPU time. when that statement executing the CUP is taking more than 90%
I am attaching the sql query and indexes on the table.
Find Queries Bases On Elapsed Time From Window Of 3 Months
Nov 19, 2012how to find out queries bases on elapsed time from the window of 3 Months
DBA_HIST_SQLSTAT and DBA_HIST_SQLTEXT
Performance Tuning :: Query Performance Gain Using Statistics?
Aug 9, 2010Somewhere I read that we should not use hints in Oracle production environments, but we can use hints in the development environment and on achieving the desired execution plan we can adjust the 'statistics' to follow that plan without hints.
Q1. If it is true what statistics do we adjust for influencing the execution plan and how?
For example, I have the following simple query:
select e.empid, e.ename, d.dname
from emp e, dept d
where e.deptno=d.deptno;
emp.empid, emp.deptno and dep.deptno columns have indexes and the tables have the standard structure as found in the basic oracle examples.
If I look at the execution plan of the above query then I see that the driving table is empand the driven table is dept.Also the type of join that is taking place is 'Nested Loop'.
Questions: With respect to the above query,
Q 2. If I want to make dept the driving table and emp the driven table then how can I adjust the statistics to achieve that?
Q 3. If I want to use hash join instead of a nested loop join then then how can I adjust the statistics to achieve that?
I can put the ordered and the use_hash hint to effect this but again I have heard that altering statistics is a more robust way to control an execution plan as compared to hints.
Performance Tuning :: Update XML Eating Up A Lot Of Time
Sep 26, 2012update xml eating up a lot of time is there any way to tune
SELECT UPDATEXML(:B3 , '/FCUBS_RES_ENV/FCUBS_BODY/FLD/FN[@TYPE="' || :B2 ||
'"]', :B1 )
FROM
DUAL
call count cpu elapsed disk query current rows
------- ------ -------- ---------- ---------- ---------- ---------- ----------
Parse 1 0.00 0.00 0 0 0 0
Execute 499 0.44 0.90 0 3 0 0
Fetch 499 1.49 2.87 0 0 0 499
------- ------ -------- ---------- ---------- ---------- ---------- ----------
total 999 1.93 3.77 0 3 0 499
real code
SELECT updatexml(l_xml,
'/FCUBS_RES_ENV/FCUBS_BODY/FLD/FN[@TYPE="' ||
upper(replace(cspkes_misc.fn_getparam(p_parent_list,
l_parent_list_clob,
'Y',
l_cnt,
'>'),
'-',
'_')) || '"]/text()',
l_fn_str)
INTO l_xml
FROM dual;
Performance Tuning :: Avg Time Taken By Execution Plan
Apr 12, 2013How can i check the avg time taken by an execution plan. Actually i have a very big query and it changes its execution plan very often, we would like to lock the best execution plan and to find it , i would like to know the Average Execution Time the query takes when it runs using different different execution plans.
View 7 Replies View RelatedPerformance Tuning :: Time Calculation In AWR Report
Dec 12, 2011Till statspack we had
elapsed time = time spent on waits + time CPU was used
Total time during snaps = Elapsed time + (may be) time waited for CPU...In AWR is it possible to draw such equation? I can see that the AWR report has following elements
1) End Snap time - Begin Snap time
2) DB time - as mentioned at the top of AWR report
3) DB CPU - in "Top 5 Timed Foreground Events" (I assume this is 'CPU used by sesson timing' in statspack)
4) Total of time for all Statistics in "Time Model Statistics"
5) BUSY_TIME + IDLE_TIME - "Operating System Statistics"
Time between 2 snapshots? or what else? Also for which seconds to multiply to 'DB Time(s)' per second and 'DB CPU(s)' per second in Load Profile to get the db time and CPU time?
Performance Tuning :: Loading And Reading At Same Time
Feb 13, 2013For example, we have a table ACCOUNT (snowflake dimension containing other dimension keys) and I have many fact tables based on this dimension. Normally data warehouse load happens like first dimensions needs to be loaded and then facts. Our frequency of loads is 30 mins.
To increase the rate in which the data will be available in the facts (as its a financial application), am considering to have two batches one with dimension and another one with fact (came to this conclusion as there is no dependency like first dimensions to be loaded then only fact) just the update might get missed sometimes. But if I do that, when dimension gets loaded, it will be read in the facts in another session. Will this affect the performance ?
LOADING (insert/update) and selecting data from table at the same time. Will it affect the performance in any way.
Performance Tuning :: Database Time In AWR Report
Jul 9, 2012I understand that when data is read from the disk, I/O is done..And When computations are done then CPU is used..Then where the following equation fits?
DB Time = sum of database CPU time + waits
Is I/O considered as a part of CPU time?
Does this equation changes with SAN, OS caching?
Performance Tuning :: Lot Of Time Being Taken To Delete Data From A Table
Apr 27, 2012I have a table which contains 8,21,177 amount of data totally.Now I am trying to delete around 4,84,000 of data from this table by using just one filter i.e. my query is something like below
DELETE /*+ parallel(resource,4) */ FROM resource where created_by = 'MIGN'
This is going to delete 4,84,000 rows of data . But my current issue is this is taking lots of time to delete the data . To be precise , its almost taking 25 hours to delete this data..The created_by column is indexed .
Execution Plan
----------------------------------------------------------
Plan hash value: 2389236532
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
|
--------------------------------------------------------------------------------
| 0 | DELETE STATEMENT | | 499 | 20459 | 39 (0)| 00:00:
01 |
| 1 | DELETE | RESOURCE | | | |
[code]....
Performance Tuning :: Lost Index From Second Execution Time?
Jul 11, 2013The problem was describe:
- First time to execute: Using all indexes on 2 tables
- Second time to execute: Using only indexes on first table, full table scan on the other
- Third time to execute: Do FTS on both of tables.
Now, I show the objects and relate information here:
The Tables:
system@dbwap> select count(*) from my_wap.news_relation;
COUNT(*)
----------
272708
system@dbwap> select count(*) from my_wap.news_content;
COUNT(*)
----------
95092
system@dbwap> desc my_wap.news_content;
Name Null? Type
----------------------------------------------------- -------- ----------------
ID NOT NULL NUMBER(11)
SUBJECT NOT NULL VARCHAR2(500)
TITLE VARCHAR2(4000)
STATE NUMBER(1)
IMGPATH VARCHAR2(500)
ALIGN VARCHAR2(10)
[Code]....
Performance Tuning :: Max And Delete Statement Talking Lot Of Time?
Apr 15, 2011Test1 table have around 385772300 rows. below delete and select statment talking lot of time.
Select stament taking more than 1 hrs.
SELECT TO_NUMBER(MAX(f.T3))
--INTO v_FISCAL_MONTH_ID
FROM Test1 f;
delete statment taking more than 2 hours
DELETE FROM TEST1 WHERE TRUNC(T10) < TRUNC(ADD_MONTHS(SYSDATE,-36));
CREATE TABLE Test1
(
[Code].....
Performance Tuning :: Snapshot Skipped In Between Scheduled Time?
Sep 11, 2013Yesterday, there were performance issue at server. So today, when i am generating report for that particular period, found snapshot id sequence is serially but with skipped hourly timed. Instead of generating report at 15:30, it generated at 16:30.
Enter value for num_days: 2
Listing the last 2 days of Completed Snapshots
Snap
Instance DB Name Snap Id Snap Started Level
------------ ------------ --------- ------------------ -----
tagidev TAGIDEV 2857 10 Sep 2013 00:30 1
2858 10 Sep 2013 01:30 1
2859 10 Sep 2013 02:30 1
2860 10 Sep 2013 03:30 1
2861 10 Sep 2013 04:30 1
2862 10 Sep 2013 05:31 1
[code]....
Below are the details at alert log -
Tue Sep 10 14:28:20 2013
Thread 1 cannot allocate new log, sequence 7029
Checkpoint not complete
Current log# 2 seq# 7028 mem# 0: E:APPORACLEORADATATAGIDEVREDO02.LOG
Thread 1 advanced to log sequence 7029 (LGWR switch)
[code]....
1) why snap didn't started at 15:30?
2) since database just started at the scheduled time of AWR snap time. But generated at 16:32 instead of 16:30, though last services "SMCO" is started at 16:42. How it snap id generated for this particular time?
3) what does "kewastUnPackStats(): bad magic 1 (0x000000001B3CE48D, 0)" mean?
Performance Tuning :: How To Reduce Index Creation Time
Aug 17, 2010Is there any way to reduce the index creation time. I have one table which has 7700000 records and every day this table get truncate and we create with create table as select statement and then create the 4 indexes and each index took 5 minutes so in totality it took 20 minutes in index creation.
View 2 Replies View RelatedPerformance Tuning :: WINDOW SORT - Reduce Time?
Nov 30, 2011In my insert query, Window sort takes longer time i.e. 93% of total execution time, How do i reduce this time? are there any tuning parameters availabe for this?
View 5 Replies View RelatedPerformance Tuning :: Delete Statement Is Taking More Time For Execution?
Mar 9, 2010In my code I am using delete statement which is taking too much time to execute.
Statement is as follow:
DELETE FROM TRADE_ORDER_EMP_ALLOCATION T
WHERE (ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT)
IN (SELECT ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT
FROM LOAD_TRADE_ORDER
WHERE IND_IS_BAD_RECORD='N');
Tables Used:
oTRADE_ORDER_EMP_ALLOCATION Row count (329525880)
oLOAD_TRADE_ORDER Row count (29281)
Every column in "IN" clause and select clause is containing index on it
Every time no of rows which to be deleted is vary (May be in hundred ,thousand or hundred thousand )so that I am Unable to use "BITMAP" index on the table "LOAD_TRADE_ORDER" column "IND_IS_BAD_RECORD" though it is containing distinct record in it.
Even table "TRADE_ORDER_EMP_ALLOCATION" is containing "RANGE" PARTITION over it on the column "ARTEMIS_SOURCE_SYSTEM_ID". With this I am enclosing table scripts with Indexes and Partitions over it.
way for fast execution in of above delete statement?
Performance Tuning :: How To Find Out Queries That Are Executed In Particular Range Of Time
Sep 9, 2011here we have an scenario where we want to find out all the sql statements that are executed in a particular time. The sql statements are executed via our application. I tried in awr report but it shows only the sql query which has taken long time to execute. and i even tried in V$session and V$sqlarea. how to view the executed sql statements in a particular session/current session
View 3 Replies View Related