Is it possible to create sequence using EXECUTE IMMEDIATE statement. The sequence name will be the bind variable.
DECLARE
TEMP VARCHAR2(20);
BEGIN
TEMP := :P2_INFO;
EXECUTE IMMEDIATE 'CREATE SEQUENCE' TEMP;
END;
This creates a sequence named TEMP, but i want the name :P2_INFO entered by user.
HOW to use variable P_TMPLID in following statement
TYPE typ_unrecon IS TABLE OF REC_' || P_TMPLID ||'_UNRECON%ROWTYPE index by binary_integer;
because its throwing error while compiling
and also in statement
FORALL i IN unrecondata.FIRST .. unrecondata.LAST SAVE
EXCEPTIONS
--STRSQL := '';
--STRSQL := ' INSERT INTO REC_' || P_TMPLID ||'_UNRECON VALUES ' || unrecondata(i);
-- EXECUTE IMMEDIATE STRSQL;
INSERT INTO REC_' || P_TMPLID ||'_UNRECON VALUES unrecondata(i);---throwing error on this statement
commit;
--dbms_output.put_line(unrecondata(2).TRANSID);
EXCEPTION
Can we use the sequence.nextval,sequence.currval inside case block.
CREATE TABLE EQUALITY_TEST(NUM1 NUMBER, NUM2 NUMBER, SEQ NUMBER);
INSERT INTO EQUALITY_TEST VALUES ( 2 ,0 , NULL);
INSERT INTO EQUALITY_TEST VALUES ( 2 ,2 , NULL);
INSERT INTO EQUALITY_TEST VALUES ( 2 ,2 , NULL);
INSERT INTO EQUALITY_TEST VALUES ( 12 ,2 , NULL);
INSERT INTO EQUALITY_TEST VALUES ( 12 ,12 , NULL);
INSERT INTO EQUALITY_TEST VALUES ( 12 ,12 , NULL);
CREATE SEQUENCE SEQ_TEMP START WITH 100 INCREMENT BY 1;
Now i need to update SEQ column with SEQ_TEMP sequence. When NUM1,NUM2 values are unequal sequence should be incremented otherwise need to use the same sequence number(CURRVAL)
I have tried like this
UPDATE EQUALITY_TEST
SET SEQ=
CASE WHEN NUM1=NUM2
THEN SEQ_TEMP.NEXTVAL
ELSE
SEQ_TEMP.CURRVAL
END ;
SELECT * FROM EQUALITY_TEST;
Output
NUM1NUM2SEQ
120100
222101
322102
4122103
51212104
61212105
But Required Output
NUM1NUM2SEQ
120100
222100
322100
4122101
51212101
61212101
I'm having some difficulty getting a simple SQL statement to work. It uses bind variables, but has a problem when I introduce a sequence:
INSERT INTO AE_MASTER.STAGE_USAGE (STAGE_USAGE_ID, ANIMAL_USAGE_ID_FK) VALUES (AE_MASTER.AE_GENERIC_SEQ.NEXTVAL, :dummy)
==> ORA-00942: table or view does not exist
But if I remove the sequence, it works:
INSERT INTO AE_MASTER.STAGE_USAGE (STAGE_USAGE_ID, ANIMAL_USAGE_ID_FK) VALUES (1, :dummy)
==> Success
So you might think there is a problem with the sequence, but if I use a name that doesn't exist, it tells me so:
INSERT INTO AE_MASTER.STAGE_USAGE (STAGE_USAGE_ID, ANIMAL_USAGE_ID_FK) VALUES (xxxAE_MASTER.AE_GENERIC_SEQ.NEXTVAL, :dummy)
==> ORA-02289: sequence does not exist
So I'm a bit stumped as to why it's not working! Is it not possible to use sequences with bind variables?
In the past I have gotten around this by using a SELECT statement to get the sequence number then following it with the INSERT statement, but this time I'd really like to get it all done in the same statement if possible.
Execute Immediate on SELECT Statement
declare l_stmt VARCHAR2(1000);
begin
l_stmt := 'Select * from mytable' ;
EXECUTE IMMEDIATE l_stmt;
--- dbms_output.put_line( l_stmt);
end;
it is not returning any output. I have hardcoded the table name here where as in real time Mytable name will differ.
CREATE TABLE TEST1
(
OFFICE_PRODUCTS NUMBER,
OFFICE_ELECTRONICS NUMBER
)
Insert into TEST1 (OFFICE_PRODUCTS, OFFICE_ELECTRONICS) Values(1, 0);
COMMIT;
CREATE TABLE TEST2
(
EXPORT_FIELD_NAME VARCHAR2(100 BYTE),
EXPORT_COLUMN_EXPRESSION VARCHAR2(100 BYTE)
)
Insert into TEST2
(EXPORT_FIELD_NAME, EXPORT_COLUMN_EXPRESSION)
Values ('A1', 'least(OFFICE_PRODUCTS, OFFICE_ELECTRONICS)');
COMMIT;
I want to be execute the expression should run in select statement how to do? and tried as like below,it's not working.
select (select EXPORT_COLUMN_EXPRESSION from test2 where EXPORT_FIELD_NAME='A1') FROM TEST1;
reconciliation logic using Oracle
Version
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Current written logic for reconciliation:
1. Load data from source_a in a staging table using date filter
2. Load data from a file (Source_B) in temp table
3. Algo for reconciliation:
fetch value from source_B and if an entry exists in source_a then match say 10 columns if they match update reconciliation_oke = TRUE
there is an and written for testing all the 10 columns There is report generated out this which shows non matched columns and the entries which are missing....Now the requirement is to modify the logic in a way which shows which all columns are mismatched on the report in case present.
Since there are around 10 thousand records which would be reconciled on a daily basis, performance also needs to be taken care of...I guess i would be required to use PL/SQl tables...
I'm writing simple code db is 9.2.0.8
create or replace procedure gather_part_stats(p_schema in varchar2, p_table in varchar2)
as
l_quarter varchar2(8) := to_char(sysdate, '"Y"YYYY"_Q"q') ;
l_sql varchar2(2000) := 'exec dbms_stats.gather_table_stats(:schema, :table, method_opt => ''for all columns size 1'' , cascade => true , estimate_percent => 1 , granularity => ''PARTITION'', partname=>:part);';
[code].......
I'm using using to avoid sql injection,
Error is:
SQL> exec gather_part_stats('TEST' , 'TEST');
l_quarter: Y2012_Q2
exec dbms_stats.gather_table_stats(:schema, :table, method_opt => 'for all columns size 1' , cascade => true , estimate_percent => 1 , granularity => 'PARTITION', partname=>:part);
BEGIN gather_part_stats('TEST' , 'TEST'); END;
*
ERROR at line 1:
ORA-00900: invalid SQL statement
ORA-06512: at "INSTALL.GATHER_PART_STATS", line 8
ORA-06512: at line 1
I have statement like SELECT * FROM DIVISIONS;
i have to run this statement for different table, and I would like to pass the table name as variable
ex:
create or replace precedure dynamic_execute
v_tbl varchar2(30);
begin
---- assign table name here
v_tbl := DIVISIONS;
EXECUTE IMMEDIATE('SELECT * FROM '||v_tbl);
end;
/
When I executed the procedure I got error, how to pass the table name as variable and execute the statement successfully.
I have oracle table with a column of datatype CLOB. In the clob column having the manipulation statements (update, insert) as records.
How to execute the statements exists in a clob column as records?
my table structure and one record is
CREATE TABLE ACTN_CFG_T
(
OBJ_ID NUMBER(32) NOT NULL,
ACTN_ID NUMBER(38) NOT NULL,
ACTN_SEQ NUMBER(2) NOT NULL,
RU_DEF CLOB NOT NULL
[code]....
I want to execute the update statement when i call the obj_id. I used the follwing procedure but error.
1 DECLARE
2 V_ABC CLOB;
3 BEGIN
4 SELECT RU_DEF INTO V_ABC FROM ACTN_CFG_T WHERE OBJ_ID = 1625;
5 EXECUTE IMMEDIATE V_ABC;
6 END;
error is...
ORA-06550: line 5, column 20:
PLS-00382: expression is of wrong type
ORA-06550: line 5, column 2:
PL/SQL: Statement ignored
I am trying to understand the difference between using sequence.NEXTVAL from DUAL as against using it direclty in an INSERT statment.
--Sequence Creation
CREATE SEQUENCE SEQ_ID START WITH 1 MINVALUE 1 NOCYCLE CACHE 500 NOORDER;
--Table1 Creation
Create table TABLEA (COL1 number, COL2 varchar2(10),
constraint COL1_PL primary key (COL1));
--Table2 Creation
Create table TABLEB(COL3 number);
alter table TABLEB add constraint COL1_FK foreign key(COL3) references TABLEA(COL1);
-- Option1 - Using sequence.NEXTVAL from DUAL
DECLARE
v_seq_num NUMBER;
BEGIN
SELECT SEQ_ID.NEXTVAL INTO v_seq_num FROM DUAL;
INSERT INTO TABLEA (COL1, COL2) VALUES (v_seq_num, 'test');
INSERT INTO TABLEB (COL3) VALUES (v_seq_num);
END;
-- Option2 - Using sequence.NEXTVAL in INSERT USING RETURNING INTO clause
DECLARE
v_seq_num NUMBER;
BEGIN
INSERT INTO TABLEA (COL1, COL2) VALUES (SEQ_ID.NEXTVAL, 'test') RETURNING COL1 INTO v_seq_num;
INSERT INTO TABLEB (COL3) VALUES (v_seq_num);
END;
I have a procedure as below. To sum up the procedure in one line it dynamically forms a string to get the values of the type which is passed as an input to the procedure.
I call the procedure as
exec exec_imm( exec_imm_t(1,'asd','1/2-34'));
ERROR:
Error starting at line 9 in command:
exec exec_imm( exec_imm_t(1,'asd','1/2-34'))
Error report:
ORA-00904: "P_TYPE_DATA"."ADDRESS": invalid identifier
ORA-06512: at "PTK_ADM.EXEC_IMM", line 26
ORA-06512: at line 1
00904. 00000 - "%s: invalid identifier"
NOTE:
When I try to execute the procedure with the execute immediate statement I get the above error. But when I execute the select statement which is nothing but the value in v_type_data directly (as seen in the comments in the code below) there is no error. But when the same v_type_data is used in execute immediate, I get an error.
CREATE OR REPLACE procedure exec_imm(p_type_data exec_imm_t)
AS
v_type_str CLOB := NULL;
v_type_data CLOB := NULL;
v_type_name VARCHAR2(25) := NULL;
BEGIN
[code]......
We are trying to execute a statement SELECT CURRENT_DATE FROM DUAL on Timesten 11.2.2 . It throws error unknown referenced column error. Command> select current_date from dual; 2211:
Referenced column CURRENT_DATE not foundThe command failed. But the following doc shows the support.
TimesTen PL/SQL Support: Reference Summary CURRENT_DATE function
Returns the current date in the session time zone. YIn TimesTen this returns the current date in UTC (universal time). TimesTen does not support local time zones.
I want to convert the below SQL to a dynamic sql to be executed from execute immediate statement.
UPDATE transaction SET loannum = lpad(loannum,12,'0')
Create a sequence E_SQ which start with the (current max empno + 1) and increment by 1.
View 5 Replies View RelatedI want to execute a DML query with execute immediate statement. That DML query length exceeds 4000 characters. This query has Xquery related conditions, i can not split the query. when i tried execute it is giving "string literal too long". I tried with DBMS_SQL.Parse() and DBMS_SQL.Execute also, but it is giving same error. I have to execute this DML query inside a Procedure. We are using oracle 10g version
View 13 Replies View Relatedi would like to create a sequence inside a dml trigger. Is it possible? I created a trigger and it is compiled sucessfully.
create or replace trigger tri_update_test
after delete on test
declare
pragma autonomous_transaction;
[code]...
trigger created sucessfully.And i try to delete data from the test
delete from test where id=5;
Output:
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SCOTT.TRI_UPDATE_TEST", line 4
ORA-04088: error during execution of trigger 'SCOTT.TRI_UPDATE_TEST'
I am trying to create a procedure using the EXECUTE IMMEDIATE. I have been having problems calling it from an anonymous block
My code
CREATE OR REPLACE PROCEDURE homework
(p_table_name VARCHAR2)
IS
v_department_id departments.department_id%TYPE;
BEGIN
EXECUTE IMMEDIATE
[code]....
I called the procedure from an anonymous block
BEGIN
homework('Employees');
END;
It gives me an error
ORA-00905: missing keyword
CREATE sequence customer_id start with (select max(customer_id) from customer) increment by 1
i am trying to do that, can it be done or should i just find the max id myself and replace that select with a no?
Every time sequence should be start from 1.can i know how to create sequence? for ex:-once i have uploaded 100 records this time sequence is generating from 1 to 100.next time i will upload again 100 records this time sequence is generating(Starting) from 200 to 300.but it should be generate from 1. how? i have created like this
CREATE SEQUENCE XX_SEQUENCE
MINVALUE 1
MAXVALUE 99999999999
START WITH 1
INCREMENT BY 1
CYCLE
NOCACHE;
I know how to create sequence in the database.But I want to create this sequence from the form by giving the name of the sequence from a filed in the form.
View 1 Replies View Related i would like to create a sequence inside a dml trigger. Is it possible? I created a trigger and it is compiled sucessfully.
create or replace trigger tri_update_test
after delete on test
declare
pragma autonomous_transaction;
begin
execute immediate 'create sequence t_unqid
start with 1
increment by 1
nocache '
end ;trigger created successfully. And i try to delete data from the test delete from test where id=5;
Output:
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SCOTT.TRI_UPDATE_TEST", line 4
ORA-04088: error during execution of trigger 'SCOTT.TRI_UPDATE_TEST'
create table t (a varchar2(20),b number(8));
insert into t values ('aa',4);
insert into t values ('ba',6);
insert into t values ('ca',7);
insert into t values ('da',8);
in place of 8 there can be any number between 1 to 100
if in place of 8 number is <10
insert into t values('ea',10); ---- this i need dynamic insert
if in place of the number between 11-19 then
insert into t values('ea',20); ---- this i need dynamic insert
and so on
i tried as below
select case when max(b) <10 then 10 when max(b) between 10 and 20 then 20 end from t;
but i cant write case for again and again upto nth
How can i create a temporary table using EXECUTE IMMEDIATE ??
Like:
CREATE GLOBAL TEMPORARY table new_table as (Select * from old_table);
i try to make trigger to execute immediate create or replace view
(
CREATE OR REPLACE TRIGGER xxxx
BEFORE INSERT ON table1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
declare
l number ;
v_ddl varchar2(4000);
v_job number;
[code]....
it give me error for insuffition privilage in execute immediate and after i make GRANT CREATE ANY TRIGGER TO user give me error can't commit in trigger.
I am trying to create table using bind variable in EXECUTE IMMEDIATE.. I want to know whether oracle allows to create table using bind variable in EXECUTE IMMEDIATE..
Following is the example :
Declare
test_tab varchar2(10) := 'tab_test';
sql_stm varchar2(100);
Begin
sql_stm := 'create table ' || :a || ' (col1 NUMBER)';
dbms_output.put_line(sql_stm);
EXECUTE IMMEDIATE sql_stm
using test_tab;
Exception
WHEN OTHERS THEN
dbms_output.put_line(sqlerrm || ' ' || sqlcode);
End;
After running above block it is giving error : ORA-01008: not all variables bound.
I cant compile & execute this function.
create or replace
FUNCTION get_branding_testing
RETURN r_brand
IS
BEGIN
CURSOR c1
IS
SELECT b.branding_code, c.name_desc
[code]....
I am switching database from access to oracle 11g. I have create all the required tables, but I am stuck at one point. The previous person who created access database had auto increment with SG0101, SG0102,........ In oracle I know we can auto increment primary keys but only with the numbers not with characters.
So I have customerid which is a primary key and it automatically increments the number, but I have one more column with memberid where I am inserting all the ids that start with SG0101 bla bla.....
I already have 800 member ID's that start with SG, but that value doesnt automatically increment because I dont have any sequence or trigger to do that.
So how do I create a sequence and trigger that will automatically start value with SG and keeps auto incrementing?
I have a series of SQL scripts which contain SQL statements to create tables, populate them, create functions and stored procedures. Now I would like to execute each sql file against SQLPlus using a batch file so that I can just run this one file and all the configuration work I need to do can get done.
Problem is, when I try to execute the SQL file against SQLPlus, it gets upset with the Create Procedure/Function scripts...
I am using the following command:
sqlplus u/p@<someserver> @<path_to_sqlfile>.sql
this sql file contains create procedure pl/sql code
Is it possible create/compile SP/Functions that are contained within SQL Files using SQLPLus? Or do I have to physically write them out in SQLPLus (or load them in SQLDeveloper) to accomplish this?
I need to create an oracle job that will execute a shell script. i need to run it only when I call it(so not to be scheduled).
View 5 Replies View Related