How to pass parameter value to a procedure in schedule jobs ?
--procedure : create or replace procedure updating_temptable(empcode in varchar2) is begin update ts_employee_master mas set mas.last_accessed = sysdate where mas.employee_code = empcode; end;
--scheduler
begin sys.dbms_job.submit(job => :job, what => 'updating_temptable;', next_date => to_date('24-04-2012 00:30:00', 'dd-mm-yyyy hh24:mi:ss'), interval => 'TRUNC(SYSDATE)+1+30/1440'); commit; end; /
How to pass employee_code in the procedure[updating_temptable ] in dbms job scheduler ?
I saw bunch of other posts but I could find the post that exactly explaining about where the value returned as systimestamp / sysdate comes from or impacted Here is my situation I have an access to this db (let me call db A) and when I access it, I get following result. I don’t have full access to this db so I cannot experiment a lot here.
I’m in PST timezone.I have my db which I have full access as well as its host.I can make result like db A on my db if I started up db and its listener while TZ environment variable equal to UTC.Now I saw in other post that someone was trying to retrieve systimestamp value in a job executed via dbms_scheduler.run_job.
So I did that in two ways. 1 with use_current_session = true and 2 is false for the same.On my db, results are the same (both returns time in UTC) but on db A, I got UTC time when use_current_session = true and PST when use_current_session = false.
So questions are: What could be the difference in setup between my db and db A? Is there a query, logfile, or anything I should check to find out what can be the difference?
I tried to find the cause with my db and I could see the same result as db A which is to see UTC time if use_current_session = true and PST time if use_current_session = false by bringing up the db listener after I set TZ environment variable equal to PST8PDT. However this causes systimestamp from sqlplus session become also a PST time.
The reason I’m playing around with the setup and checking systimestamp value is because we are facing the situation where everywhere except pl/sql job submitted by enterprise scheduler service is pointing wrong timezone (PST instead of UTC)
I've written a chain with four programs. The third program is depend on the output of the second. However the third program finishes before the second. How do I wait for the second to finish.
How to create DBMS_SCHEDULER job for particular instance,we have 3 instance we want to schedule few jobs in Instance 2,how to schedule in Particular instance.
I studied the documentation and many websites about DBMS_JOB but I am still confused.How do I schedule a procedure to run i.e. every sunday 10:00 AM ?This is what I tried:
DECLARE X NUMBER; BEGIN SYS.DBMS_JOB.SUBMIT ( job => X
I'm using Oracle DB 10g EE 10.2.0.3.0 I have created a program to be executed with scheduler. however when I execute the job it fails due to a permissions error.
BEGIN DBMS_SCHEDULER.CREATE_PROGRAM ( program_name => 'Billing_files_organise_prog', program_action => '/home/ora10/data/organise.sh',
I have written a procedure to send a pdf file through mail. The directory was created and registered in SYS.DBA_DIRECTORIES with read,write grant access. But im getting the below error.
****** ORA-20014: Error in MAIL_FILES_PRO ORA-20012: Invalid Operation ORA-06512: at "ANAND.PRO_ICTPAYSLIPMAIL02", line 229 ORA-06512: at line 2 ******
I have scheduled few jobs (scheduled for each day) which has not run today, which was running successfully till yesterday. When I query dba_scheduler_jobs, i could see last_run_date as yesterday's date 6am and next_run_date is still showing today's date and time (it should show tomorrow's date/time).
When performing test recoveries of a database we often wish to prevent database jobs from running application processes such as (a) sending emails; or (b) logging events to a central logging database. In order to accomplish this, we set the job_queue_processes to zero before opening the database.
This means that no dbms_jobs run on the open instance, but it does not prevent dbms_scheduler jobs from running.How can we prevent any dbms_scheduler jobs from running?
I have looked at setting the MAX_JOB_SLAVE_PROCESSES attribute using DBMS_SCHEDULER.SET_SCHEDULER_ATTRIBUTE, but this cannot be set to zero.
we are facing an issue with the dbms scheduler jobs, which is not processing the synonym which is created via dblink from anthoer schema.
Let me explain the situation.
Table in Schema :APP_COMMON DB: APPL -------------------------------------
CREATE TABLE TEST_LOG (A VARCHAR2(10));
INSERT TEST_LOG VALUES ('TESTED');
GRANT SELECT ON TEST_LOG to APP_GEN ;
Table in Schema :APP_GEN DB: APPL -------------------------------------
CREATE SYNONYM TEST_LOG FOR APP_COMMON.TEST_LOG;
SELECT * from TEST_LOG;
-- it returns the value
Table in Schema :APP_GEN DB: REPORT -------------------------------------
This is the different DB (we have 2 DB's, one for report db and one for application DB). here we create the DB link (connected DB menthod) . Since we have the password sync between the databases, we create the DBLINK without user id and password.
CREATE DATABASE LINK "APPL_LINK" USING 'APPL' ;
CREATE SYNONYM TEST_LOG FOR TEST_LOG@APPL_LINK;
SELECT * from TEST_LOG; --it returns the value.
Now in the same DB, we have a scheduler which will run for every min.
Now Scheduler is not selecting this table. Rather not processing the synonym(TEST_LOG). Not able to capture the exception also.
I have learned procedure to send email with html attachment using UTL_SMTP protocol. But I could see the mailed attachment shows .Dat format. I need the attachment should go in .Html format.
find the below code which i am using:
CREATE OR REPLACE PROCEDURE send_email( pi_from in Varchar, pi_to in VARCHAR, pi_subj in VARCHAR, pi_msg CLOB )
We currently send mail via UTL_SMTP, we could easily switch to SMTP_MAIL but that is beside the point.
Our issue is that we have no way to find out what happens to mail we send to the MTA program, "smtpd". It is of my knowledge that the only information we can receive back from UTL_STMP is if the email address is invalid or if the email is going to be attempted to be forwarded by the MTA "smtpd".
We need the REAL data behind the scenes that "smtpd" is going to get after it attempts to forward an email from the database to GMail for example. We need "account does not exist" errors, and anything else that Google might have to say about us sending that address mail.
As far as I have researched there are no out of the box ways to send mail in this fashion.Could this be as simple as specifying the MX server for GMail? So for an email to a GMail account instead of connecting to localhost:25 for our SMTP server, we should connect to mx.googlemail.com:25?
how to setup receiving bounce messages through the database? We currently receive mail at the database box, and I think we can specify a special clob that will open one of the incoming mail files in RHEL to read for bounces.
I have a refresh group that will refresh several materialized views at 4:00am. Sometimes the job failed. We need to enter to the enterprise manager to check the status of the refresh group.
Our target is that notification email is sent to our email once the refresh job failed. I have found some software that can do that. However, we need to handle ourselves. I would like to ask whether we can do that using enterprise manager.
BEGIN dbms_network_acl_admin.add_privilege (acl=> 'mails_senden.xml', principal=> 'USER2', is_grant=> true, privilege=> 'connect');
[code]....
USER1 sent a mail via UTL_SMTP successful whereas USER2 got the errors:
DECLARE * ERROR at line 1: ORA-24247: network access denied by access control list (ACL) ORA-06512: at "SYS.UTL_TCP", line 17 ORA-06512: at "SYS.UTL_TCP", line 267
[code]....
There is still the following fact:
USER1 has the role DBA, USER2 got the EXECUTE privilege to packages UTL_TCP, UTL_SMTP (GRANT from SYS).
IF the role DBA was granted to USER2 too then he couldt send emails just as well as USER1.
ERROR at line 1: ORA-29279: SMTP permanent error: 550 <account@test2.com[/email]> No such user here ORA-06512: at "SYS.UTL_SMTP", line 21 ORA-06512: at "SYS.UTL_SMTP", line 99 ORA-06512: at "SYS.UTL_SMTP", line 241 ORA-06512: at "SYS.UTL_MAIL", line 424 ORA-06512: at "SYS.UTL_MAIL", line 594 ORA-06512: at line 2
I have to embed a picture as a header with an e-mail content for my work, I google'd and tested with different options but I failed. (The JPG is stored in a table as a blog object) When I tried with the below code the JPG file is e-mailed as an attachment with an e-mail content, I want it to be displayed inside an e-mail.
I tried att_inline: TRUE option as well - still not working.
Here is my code I tested and worked as an attachment.
I need to create a forgot password page in which there will be two text box named user name and email id and user will provide his usename and email id in those text box. so apex will check that the provided name and email id are there in the data base and if email id corresponds to right user name then a mail will be send to that email Id containing auto generated password.
We have a scheduler chain that calls 2 scheduler programs.The chains are controlled by a scheduler job that has job_type as CHAIN.My challenge is how to add email notifications on the failure or success of the programs.
I know about this procedure DBMS_SCHEDULER.ADD_JOB_EMAIL_NOTIFICATION, but this is only applicable to jobs and not programs(i believe). Is there an alternative way to trigger off emails for scheduler programs ?
I m using UTL_SMTP to send mail using my mail server. could i check the availability of 1st mail server, if not available then could i set alternate mail server.
I am begginer programing oracle and I have a issue to resolve but I can't resolve it.I have a procedure that upload a image from a directory. But when I pass the path, the function bfilename put a slash "/" in the path. I don't know why.Here my code.
CREATE OR REPLACE PROCEDURE p_grava_assinatura_gestor AS --------------------------------------------------------- -- Crio o Cursor dos Nomes dos Arquivos JPG. -- --------------------------------------------------------- CURSOR cursor_nome_arquivo IS SELECT p.id, (p.empresa || '_' || p.chapa || '.JPG') AS noarq