I want my query to return the rows of the table where a column contains a specific values first in a certain order, and then return the rest of the rows alphabetized.
For Example:
Country
ALBANIA
ARGENTINA
AUSTRALIA
....
CANADA
....
USA
....
Now i want USA and CANADA on top in that order and then other in alphabetized order.
There are four columns as follows, but I need to delete those rows from the third column only where the second letter of the word appears as vowel. For example, I want to delete the rows having the words, 'Ramu' and 'Ravi' only.
A B C D
xx y Ramu xx
yu ut Ameer uui
rtt iw Ravi iwoow
fgsg isd Intel jjuiw
I have a history table which has a new record written to it for every time static data is updated. What I want to do is return any record that has been changed on a daily basis returning both the new record and the previous record so you can see the 2 records one below the other and compare.I have written the below but it returns all records per account:
SELECT H.Timestamp,H.AccountNo FROM History H
where exists (select H2.AccountNo,count(*) from History H2
where H2.AccountNo = H.AccountNo
group by H2.AccountNo having count(*) > 1 )
Where H.Timestamp > '20111101'
order by H.AccountNo,H.Timestamp
I'd like to know if it is possible to track DML actions issued on a specific table by a specific user, for example , i tried :
AUDIT SELECT on SCOTT.DEPT by HR by ACCESS;
I get an error, where is my syntax error ?
i want to know if it's possible to do it without trigger ?
In details table i am having loc is column in which data is like this(Jones,180),(US,host name),(job, company),(id,0122)
output should be it should take only first value from ().
I am fetching records from many voluminous tables having multiple joins based on filter criteria filled from frond end application. As per the selected criteria, I want to have a pre-check if query would return more than 1000 rows then I have to show user a message saying that he should refine the search. Is there any performant way to query db and dynamically find record count and stops executions if it is going return more than the specified no of rows.
View 5 Replies View RelatedI need to get the number of rows based on one condition for certain time period. For example, writing a query for 3(any) hrs , i need to get the output as count of rows as hourly basis. Like these:
Date Time Count
12/08/2010 16:00 234
12/08/2010 17:00 345
12/08/2010 18:00 645
This is what I've been trying to do.
I have the following table:
FOOTBALL PLAYERS < ID, NAME, ATTRIBUTE>
100-JIM-TALL
101-BOB-STRONG
102-MARK-SMART
...etc
I want to form a query that regardless of the total returned records, I will be able to specify how many of each "kind" of players I want returned. There are several good reasons that it has to be one query and not many.
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit
PL/SQL Release 10.2.0.5.0 - Production
"CORE10.2.0.5.0Production"
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
See attachment for table creation and table data.
The table tbl_completed has two columns, id and completed. I have created a query that does provide me with the result set that I need, but I need to pivot the rows into columns. So instead of a result set to look like this:
select completed, count(completed) as theCount from tbl_completed group by completed;
COMPLETED THECOUNT
Y 772
N 720
I need a result set to look like this:
COMPLETED,Y,N
THECOUNT,772,720
The best solution that I have discovered is this, but I figuring their might be a better way.
select
(select 'THECOUNT' from dual) as COMPLETED,
(select count(completed) from tbl_completed where completed = 'Y') as Y,
(select count(completed) from tbl_completed where completed = 'N') as N
from dual;
COMPLETED,Y,N
THECOUNT,772,720
I need encrypt column in the table (TDE) with 160 rows (PK) i'd like know what impact if i rn in time production this procedure. And as will be behavior the oracle database if this column is FK.
View 2 Replies View RelatedI need to return results for the following query only when there are two or more rows found by the following:
SELECT DISTINCT D.PUBLICATION,
D.ADI,
D.DISTRICT,
D.ACCOUNT,
D.ROUTE,
[code]......
Expected results would be:
1 145 CRF TUANR000 VM BILLETING 16-APR-10 5 5 23-APR-10 48623
1 145 CRF TUANR000 VM BILLETING 16-APR-10 5 4 23-APR-10 48629
I have a database in 10g in entreprise edition but i don't understand why the dba_feature_usage_statistics return no rows ? On some database when i look at dba_ feature_usage_statistics Protection Mode - Maximum Performance is used and active why?
View 4 Replies View Related trying to update a column in a table which has 3 columns of 16million rows from column in another table which has 1million rows, there is no relationship between the 2 tables.
Table A has 3 columns of 16million rows, the first two columns have 16million ID numbers, the 3rd colunm is currently NULL.
Table B has 1million Numbers, i need to somehow update column 3 in table A using the numbers in table B, it doesnt how many times each of the 1 million numbers are used but i dont want it to just update every row to the same value.
If i have a CSV file that is in the following format
"fd!","sdf","dsfds","dsfd",
"fd!","asdf","dsfds","dsfd",
"fd","sdf","rdsfds","dsfd",
"fdd!","sdf","dsfds","fdsfd",
"fd!","sdf","dsfds","dsfd",
"fd","sdf","tdsfds","dsfd",
"fd!","sdf","dsfds","dsfd",
Is it possible to exclude any row where the first column has an exclamation mark at the end of the string.
i.e. it should only load the following rows
"fd","sdf","rdsfds","dsfd",
"fd","sdf","tdsfds","dsfd",
I am using Oracle 10.2
can i have a pl/sql function that can return multiple rows
may be the syntax will be like
create or replace function multiple() returns ...
begin
select candidateid from tbl_candidateinfo;
..code to return the result of above statement to calling program..
end;
and functions will be called as
select candidateid from .. where candidateid in( select multiple());
I need a function that should return output of this query
SELECT b.branding_code, c.name_desc
FROM
development.brandings b, godot.company c
WHERE b.company_id = c.company_id;
This above function return 30 rows and I am not giving any input
Function using cursor,pipeline
If I return multiple rows says ex:100 rows then what will be data type for that return values.
View 1 Replies View RelatedI have not found a solution for this, but it could be that I don't know what to search for.
I need to edit the following statement:
SELECT a.id||a.name||a.amount*2 as transaction
FROM a
WHERE a.amount IN (500, 1000)
To return:
TRANSACTION
------------------------------------
123SMITH1000
123SMITHADJUSTED AMOUNT PER X
456JONES2000
456JONESADJUSTED AMOUNT PER X
The returned rows need to be in this format to be executed in another database.
Can this be done?
How to return multiple rows from the stored procedure in ORACLE..
View 2 Replies View RelatedI need to get the super set(parent) record from a relational table. Following is the structure of the table,
create table relation (data_field1 number(20),data_field2 number(20),data_field3 number(20),
primary key (data_field1,data_field2,data_field3) );
insert into relation (data_field1, data_field2, data_field3) values (-10,123,334);
insert into relation (data_field1, data_field2, data_field3) values (200,123,334);
insert into relation (data_field1, data_field2, data_field3) values (300,123,334);
insert into relation (data_field1, data_field2, data_field3) values (400,123,334);
[code].....
Here '-10' will be considered as parent(super set) for all other values. If i have records like below,
-10 200 300
100 200 300
123 200 300
521 201 300
Output should only contain two rows. A super set row and other distinct row(second column value is not equivalent to super set).
EMP table
create table emp1 (empno number,deptname varchar2(30),deptno number,sal number);
insert into emp1 values (1,'Bank',10,1000);
insert into emp1 values (1,'Finance',20,400);
insert into emp1 values (2,'Finance',20,4000);
insert into emp1 values (3,'Account',30,3000);
commit;
select * from emp1;
actual output :
empno deptname deptno sal
1 Bank 10 1000
1 Finane 20 400
2 Finane 20 4000
3 Account 30 3000
Expected output :
empno deptname deptno sal
1 Bank 10 1000
2 Finane 20 4000
3 Account 30 3000
I am looking a output like above one. if any empno belongs to deptname Bank then give priority to that values else go to other dept like Finance but empno 1 should return only one row.i.e Bank dept only.
I have to return only one row based on dept values for one empno. how to do in sql or plsql?
nex lines showing SELECT DISTINCT return different rows when used with ORDER BY.
CREATE TABLE M1( ID_ NUMBER, A NUMBER, B NUMBER);
CREATE TABLE V1 ( A NUMBER, B2 NUMBER);
DELETE FROM M1;
DELETE FROM V1;
INSERT INTO M1 (ID_, A,B) VALUES (107, 5,1);
INSERT INTO M1 (ID_, A,B) VALUES (108, 11,1);
INSERT INTO M1 (ID_, A,B) VALUES (109, 17,1);
[code]....
Say, a table has existing columns of A, B, D, and E.Now I want to add a new column C. But I want this column appear between B and D. I found that the newly added column always goes to the end of the table, i.e., A, B, D, E, C, instead of, A, B, C, D, E.
View 6 Replies View RelatedHow to add a new column to specified position in a existing table.I have using the oracle database 10g.This below code is not working in oracle 10 g
example:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER FIRST:
ALTER TABLE EMPLOYEE ADD DEPT NUMBER AFTER JOB:
I want to search a some values in oracle table and then return the corresponding column names.
View 1 Replies View RelatedI wonder if there is any way to return the columns of an select with its letters lowercase?
I have a piece of code that creates an script wich returns an SQL result to be confronted with some templates. My template have the column names in lowercase and because It is case sensitive the Uppercase returned by Oracle,
i have IR report page and download column as blob,how can security applied in specific column wise?e.g. Report page have more rows, and applied query in condition.
Select ID,dbms_lob.getlength(Blob_file) Download from Document_master
where Created_by=UPPER(:APP_USER)
OR
(exists (select '' from apex_workspace_group_users awgu
where awgu.user_name =:app_user AND awgu.GROUP_NAME='EMPLOYEE_GROUP'
)
)
Now all the rows with Download column to see EMPLOYEE_GROUP users,but i need control the download column only except Created_by=UPPER(:APP_USER) ,this case how can do the security.
I have a table with multiple rows for the KEY attribute(its not a primary key) and a Rank for each row.
I want a query which fetches one row per KEY attribute.The row with lesser Rank should be considered. But in-case if the value is null for any column the value for next Rank should be considered.
WITH TMP_TBL AS
(
SELECT * FROM (
SELECT 'A' DUN,'1' RNK,'A21' col1,NULL col2,'A41' col3,NULL col4 FROM dual
UNION ALL
SELECT 'A','2','A122','A23',NULL,NULL FROM dual
UNION ALL
SELECT 'A','3','A32','A33',NULL,'A35' FROM dual
[code].......
DUN is the KEY attribute . RNK is the Rank for each Row. COL1... COL4 are data attributes
The results I am expecting is
DUNCOL1 COL2 COL3 COL4
AA21 A23 A41 A35
BB12 B23 B15
CC12 C13 C33 C14
I want this to be done with SQL only. So I tried various ways but none were successful.Finally I created a Multi Row function row_nvl and it worked.
SELECT DUN,
row_nvl(rownvl_param_type(RNK,col1)),
row_nvl(rownvl_param_type(RNK,col2)),
row_nvl(rownvl_param_type(RNK,col3)),
row_nvl(rownvl_param_type(RNK,col4))
FROM TMP_TBL
GROUP BY DUN
But I don't think my manager will allow me to deploy a Multi Row function .
I have the following table intra_trades with t_id as the primary key. There is a trigger on that table that gets the next sequence and inserts it into the t_id column for every insert. I need to load data into that table using SqlLoader as chunks of 3000 rows and return the t_id back the script that Sqlload the data so that it can use that t_id's for the next process in the script.
intra_trades
t_id NUMBER(15) pk
t_name VARCHAR2(30)
t_loc VARCHAR2(40)
t_start TIMESTSTAMP
t_end TIMESTSTAMP
[code]....
The problem is that the only unique key on that table is the t_id which has a sequence on it and it is the pk. There can be duplicate rows in that table to meet the business needs for the company. So it is hard to associate the rest of the data in a row with t_id. The only thing I can think of is return the t_ids in the order it inserted so if the script keeps the order of rows in the memory it can associate the tid with the rest of the intra_trades info.How can I make the sqlloader return an array of t_ids that inserted? I need to return the t_ids's in the order it inserted so that the script can associate the t_id with the rest of the rest of the data in a row.
CREATE TABLE ACXIOM_RD.SOLN_STAR_MATRIX_123456_TMP1
(
ATTRIBUTE_ID NUMBER(10),
FIELD VARCHAR2(30 BYTE),
ATTRIBUTE_NAME VARCHAR2(64 BYTE),
TABLE_NAME VARCHAR2(32 BYTE)
)
[Code]....
Just now framed the query as like...
select framedquery from ( SELECT CASE WHEN table_name='MT_MEMBERS_SCOPED'
THEN ' case when 1>0 then nvl (( select value from MT_MEMBERS_SCOPED where source_code=123499 and member_id= soln_test.member_id and attribute_id= '||attribute_id ||''||'),0) else ''00'' end ' || ATTRIBUTE_NAME ||', '
WHEN table_name='MT_MEMBERS'
[Code]....
My requirement is soln_test table contains 3 records ,for each record need to match member_id in the MT_MEMBERS_SCOPED for the four records in the table.. output should be 3 records in soln_test table + 4 records in SOLN_STAR_MATRIX_123456_TMP1 totally 7 records it means column to row...
if the member_id not exists in both tables it should return '0000' value.