I have below query which uses between clause. For some constraints I cannot use between clause so this need this to converted to use only relational operator.
select * from TABLE1
where "+ width +" between start_width " + "and end_width and "+ height +" between start_height " + "and end_height " + "and id = "+ id
Whey I try to run this query in TOAD I get an ORA-00920: invalid relational operator error. It's part of a 10g stored procedure. When I highlight it and run it it prompts me for the missing values and then the error pops up. The AND in line 4 is highlighted.
select CRIME_CLASSIFICATION_ID, crime_type, nvl(count(CRIME_CLASSIFICATION_ID),0) as CRIMECNTFrom vaps.vw_offenses where regexp_instr(valoc,to_char(location_id)) AND ( fromdate is null or offense_date between to_date(fromdate, 'mm/dd/yyyy') AND to_date(todate,'mm/dd/yyyy'))group by crime_classification_id, crime_type
i am trying to pass operators dynamically.
SQL> create table test(Amount number,Name varchar2(10));
Table created.
SQL> insert into test values(100,'USA');
1 row created.
SQL> insert into test values(150,'NEWYORK');
1 row created.
SQL> insert into test values(200,'SCOTT');
[code].....
I would like to pass the operators from another table. How to pass the operators from other table.
where difference lies between these operators or clause, & whether there is any "except" operator in oracle, i know other three are used bt dont think oracle uses "except" too..as far as i have seen "NOT IN", "MINUS" , "NOT EXISTS" are exactly similar?
View 4 Replies View RelatedI wrote an query and regarding one part, i have syntax problem, when should we seperate different arithmetic operators in a query?
for example
select density_with_desert.popp / density_with_desert.arr - sum(darea) from counytyi don't want to use variables.
The following runs no problem
SELECT
ACCO.SEQUENCE,
ACCO.DESCRIPTION,
MAX (ACCO.AUDIT_DTE)
FROM
PAS.AUDIT_CLINICAL_CARE_OPTIONS ACCO
WHERE
ACCO.AUDIT_DTE < :AuditDate AND
[code]....
However, when I try to add extra conditions to the status' in the sub select i get the error. This is one way I tried:
SELECT
ACCO.SEQUENCE,
ACCO.DESCRIPTION,
MAX (ACCO.AUDIT_DTE)
FROM
PAS.AUDIT_CLINICAL_CARE_OPTIONS ACCO
WHERE
[code]....
I've tried repeating the sub select for each of the extra status parts but everytime i hit the same problem.
i am working on a project that requires the creation of a object relational database. A number of different methods are required in order to insert different toy types into the appropriate toy related Object Table(s). Within this there will be the following fields:
Toy_name
Cost
Age_Range
rdy_allocation
and then some more specific information. The specific information for each toy is:
Toy_Type.
The toy_type can be electronic, game, or wooden.
For electronic I need to store Battery_Type and Number_of_Batteries.
For type Game, I need to store, Type, this could card_game, board_game or other_game.
For type wooden, I need to store Painted(Y/N).
The toys are requested by a child and created by elfs. This information also needs to be recorded but im more concerned with the creation of the toy class itself first. Now this was my first attempt at the solution but I cant seem to link the specific toy information into the same table. Will i have to create three separate tables then link them together?:
DROP TABLE TOY_OBJTAB;
DROP TYPE electronic_toy;
DROP TYPE wooden_toy;
DROP TYPE board_toy;
DROP TYPE toy_typ;
[code]....
I had my previous table model as below.
CREATE TABLE Rel_Module (
Id NUMBER (6) PRIMARY KEY,
Type CHAR (7) NOT NULL,
[Code]...
How I can easily load data into this new REL_MODULE table either using SQL or PL/SQL (e.g., Procedures, Functions, and Triggers). I don't need to write so many INSERT statement.
I am trying to use the REGEXP_LIKE and I am getting ORA-00920: invalid relational operator.
I have run very simplified code to try to sort it out but no success:
SELECT id, address
FROM test_lob_tab
WHERE REGEXP_LIKE(address,'^A');
select 1 from dual where regexp_like('123', '^[0-9]$');
same result from both.
I am using Oracle 11 and freetoad 11.
can we use something like this
"select ... order by emp from emp"
what is to be done? so that this qurey runs. no co-related subquery to be used.
what is the use of 1=1 in the where clause?
View 10 Replies View RelatedI have a exp .dmp file of a database that has over 1000 tables. I would like to import all tables that don't begin with 'C'. Is this possible with IMP (without listing each table I want)?
View 1 Replies View Related>select level ,empno,ename,mgr
from emp
connect by prior empno=mgr
start with mgr is null;
Output:-
>
LEVEL EMPNO ENAME MGR
----- ---------- ---------- ----------
1 7839 KING
2 7566 JONES 7839
3 7788 SCOTT 7566
4 7876 ADAMS 7788
3 7902 FORD 7566
2 7698 BLAKE 7839
3 7499 ALLEN 7698
3 7521 WARD 7698
3 7654 MARTIN 7698
3 7844 TURNER 7698
3 7900 JAMES 7698
LEVEL EMPNO ENAME MGR
----- ---------- ---------- ----------
2 7782 CLARK 7839
3 7934 MILLER 7782
Note:- I got only this that this query is alternative of self join and it is giving manager name along with mgr id for each employee but when it gives output i couldn't able to understand how to identify who is manager of whom. Tell and explain with clause in oracle , i only know it is alternative of inline view but i want to know how does it work and how to use 'WITH' in oracle query if possible.
I have a scenario where in report table I need to get
IF FLAG='Y' AND LOC=118443 THEN STATE='FIN'
IF FLAG='Y' AND LOC!=118443 THEN STATE SHOULD BE ('COMP','PART')
IF FLAG='N' IT SHOULD INCLUDE ALL STATES.
I tried using decode in WHERE CLAUSE , but not successful.
Create Table Report(Id Number,Loc Number,Flag Varchar2(3),State Varchar2(20));
table REPORT created.
Insert Into Report Values(1,1,'Y','COMP');
1 rows inserted.
Insert Into Report Values(2,118443,'Y','FIN');
1 rows inserted.
Insert Into Report Values(7,118443,'Y','COMP');
1 rows inserted.
[code]...
This time, I am going to provide the DML statements.
I have a simple table with 3 fields in it.I want to group by ACCT_NUMBER and sum of BALANCE field. But I want to get the description of the first row in a group.
the statements below. Here there are two groups of records 2001 and 2002. My sql(which I am working on) should return the following :
2001 EMPL TRAINING-MIS 20
2002 OTHER PROF SERV-HR 40
The following query will group by ACCT_NUMBER and sum of the BALANCE field. But how can I get the DESCRIPTION?
SELECT ACCT_NUMBER, SUM(BALANCE)
FROM TEST
GROUP BY ACCT_NUMBER
CREATE TABLE "TEST"
("ACCT_NUMBER" VARCHAR2(20 BYTE),
"DESCRIPTION" VARCHAR2(20 BYTE),
[code]...
I has a table with team names like
Table name:- Teams
Structure:- name
Ind
Aus
Pak
I want the o/p as:- Fixtures
Ind Vs Aus
Ind Vs Pak
Aus Vs Pak
.......
I tried it but failed in what condition to use in the where clause.I did up to this:-
select name||' Vs ' || name from teams where .......;
how to get the result.
I am getting error 'ORA-03113: end-of-file on communication channel' in Oracle 11g R2 version when I ran the below query.
WITH tab1 AS (SELECT C_NUM as col1 FROM test123_v)
SELECT COUNT (distinct col1) num_assignments FROM tab1
UNION ALL
SELECT COUNT (distinct col1) num_assignments FROM tab1
The same query is working fine in 10g.Here test123_v is view created using table test123, which has one column c_num.When I use the table instead of view in the with clause I am getting the output in 11g. The below query gives the output.
WITH tab1 AS (SELECT C_NUM as col1 FROM test123)
SELECT COUNT (distinct col1) num_assignments FROM tab1
UNION ALL
SELECT COUNT (distinct col1) num_assignments FROM tab1
I have a small doubt...Without any creation of tables as I feel it's not needed...(let me know if u need them) Error says "Missing Keyword"
select distinct record_number
from meta m, procedu b, control v, fact f, calendar dc, person p
where f.key = m.key and f.group_key = b.group_key
and b.proc_key = v.proc_key
and f.calendar_key = dc.calendar_key
and f.person_key = p.person_key
and VALUE BETWEEN DECODE((Select distinct operator_type
[code]....
But this gives an error...If the decode gives a "single"...the statement is working fine...but If the decode gives a "range"...the above statement gives an error saying "missing keyword"..Does the above code when mapped to "Range"...is it not producing "and" like " value between 100 and 1000"
I have requirement to create an XML structure through stored procedure. I need to Order some of the columns in ascending order before I format them into the xml structure. I am pretty novice to creating an output into XML format, but attached is the query I came up with (without order by). This works perfect, but now the requirement is to order by - cls_cd, and within cls_cd, again order by - cat_cd. I am not able to do this.
View 2 Replies View RelatedYou think i can do a from clause with conditions ??
The reason is that i need to retrieve fields from different schemas depending on a column in a common table
let s say the column CRITERIA_COL is in table Common
If COMMON.CRITERIA_COL has value 1 then the select query should fetch results from the schema : SCHEMA1.MY_TABLE
If COMMON.CRITERIA_COL has value 2 then the select query should fetch results from the schema : SCHEMA2.MY_TABLE
If COMMON.CRITERIA_COL has value 3 then the select query should fetch results from the schema : SCHEMA3.MY_TABLE
Something like this:
Select my_Col1, my_Col2 from
(case COMMON.CRITERIA
when '1' then SCHEMA1.MY_TABLE
when '2' then SCHEMA2.MY_TABLE
when '3' then SCHEMA3.MY_TABLE
)
but that is not working .By the way my query is not just that, it s a more complicated query, that s just the portion I am having trouble with .
I am not strong in SQL but can write easy SQL for data extraction but seem to not understand how to correctly use sysdate in a where clause.
Case: I have to create an alert that will email my IT dept once a person is terminated in Oracle HR. The alert will only run once a day with all terminations specified in the alert. Setting up the alert is not the issue, but rather the SQL code I want to use.
The alert will run everyday at CoB 17:30. Now, in my query, how do i specify that the results should be only for the current day? The problem however, is that I also retrieve Person Type which should show as Ex-Employee, but this is only shown the day after the actual termination has been done, because the employee is still active on the date of termination.
Is there a way to have a variable in the FROM clause or another way to have the table name as a variable? I'm trying to not repeat the same query three times with only the table name being different.
---the tables
create table org_a (emp_id number(5) not null, name varchar2(20));
create table org_b (emp_id number(5) not null, name varchar2(20));
create table org_c (emp_id number(5) not null, name varchar2(20));
---the records
INSERT ALL
INTO org_a (emp_id, name) VALUES (00001, 'MISTER WHITE')
INTO org_a (emp_id, name) VALUES (00002, 'MISTER ORANGE')
INTO org_b (emp_id, name) VALUES (00003, 'MISTER PINK')
INTO org_b (emp_id, name) VALUES (00004, 'MISTER BROWN')
INTO org_c (emp_id, name) VALUES (00005, 'MISTER BLUE')
INTO org_c (emp_id, name) VALUES (00006, 'MISTER BLOND')
SELECT * FROM dual;
---verify inserts
SELECT * FROM org_a
UNION ALL
SELECT * FROM org_b
UNION ALL
SELECT * FROM org_c;
---i want the table name to be dependent on a variable. eventually,
---i intend to link v_org to a form with radio buttons (values: 1, 2, 3)
---to keep this simple, i'll just assign 1 to v_org
DECLARE
v_org number(1) := 1;
v_table varchar2(5);
BEGIN
v_table :=
CASE v_org WHEN 1 THEN 'org_a'
WHEN 2 THEN 'org_b'
WHEN 3 THEN 'org_c'
END;
SELECT * FROM v_table;
END;
--this is what i receive
SQL> /
SELECT * FROM v_table;
*
ERROR at line 10:
ORA-06550: line 10, column 17:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 10, column 3:
PL/SQL: SQL Statement ignored
Equi join (Inner join)
It is the simplest join or inner. An equijoin combines rows that have equivalent values for the specified columns.
SQL> select * from x;
NAME EMAIL EMPID
Sam email@removed 1060
Rose email@removed 1061
[code]....
don't consider above mentioned queries I got valuable outputs.
NAMEEMAIL EMPID NAME EMAIL EMPID
samemail@removed 1060 sam email@removed 1060
roseemail@removed 1061 rose email@removed 1061
sonaemail@removed 1062 sona email@removed 1062
Inner join shows matches only when they exist in both tables.so , i got records 1060,1061,1062
// Referencing columns used in a USING clause.
SQL> select x.name,x.email,x.empid from x
2 inner join y
3 using (empid);
select x.name,x.email,x.empid from x
*
ERROR at line 1:
ORA-25154: column part of USING clause cannot have qualifier
so query rewritten as
SQL> select x.name,x.email,empid from x
2 inner join y
3 using (empid);
NAME EMAIL EMPID
--------------- --------------- ----------
sam email@removed 1060
rose email@removed 1061
chris email@removed 1062
I mean see two different outputs.first output records twice displayed ... Yes i agree that is Inner join.second output records not displayed twice... common records only displayed once ,in x and y.
I think should n't use a table name or alias when referencing columns used in a USING clause... am i right ????
I want to know both are inner joins .how Oracle is determined both outputs ?
SELECT sno,mid,mname
FROM manage_date
WHERE mname IN
('KIRAN-KUMAR',
'RAHUL-RAJ',
'KAUSHAL-SONI');
IF I use this query directly in DB it's working fine. But when this query is calling in .net using parameter as below it's not giving any records for more than one value. IN (:p_mname)
If I pass one name 'KIRAN-KUMAR' from .net It's working.
If I pass multiple names from .net query not returning any records.
I have to create a WHERE clause like :
SELECT * FROM wc_claims WHERE part_nbr in l_part_nbr ;
I have three tables:
table A has - user_id, supplier
table B has - supplier, part_nbr
table C , wc_claims, has part_nbr and 78 other columns.
what i need to do is when user logs in with his user_id, he should see only that info from table C, corresponding to his supplier, and the part_nbr.
SELECT supplier from table_A WHERE user_id = 'abc' ;
supp_abc
SELECT distinct part_nbr from table_B WHERE supplier = 'supp_abc' ;
partA, partB, partC,........partZZ
SELECT * FROM wc_claims WHERE part_nbr in (partA, partB, partC,........partZZ );
I have created a function :
create or replace Function wcl_partnbr ( p_supp IN varchar2 )
RETURN CLOB
IS
[Code].....
so that I can use that in the WHERE clause, because one supplier can have thousands of parts...so it works fine, if there are 200 part numbers for one supplier, but above that.. it doesnt.
I having below table :
EXAM2@orcl> desc search_table;
Name Null? Type
----------------------------------------- -------- ----------------------------
ROL NOT NULL VARCHAR2(7)
CNM NOT NULL VARCHAR2(30)
FNM NOT NULL VARCHAR2(30)
MNM NOT NULL VARCHAR2(30)
DOB NOT NULL DATE
YEAR NOT NULL NUMBER(4)
EXAM NOT NULL VARCHAR2(1)
MAIN_SUPP NOT NULL VARCHAR2(1)
In a dotnet application user is going to input/select all/any of the above column in where clause.If user has given value for rol column then ref cursor should be :
select * from search_table where rol like <given value>
endif
and/or
If user has given value for cnm column then ref cursor should be :
select * from search_table where rol like <given value> and/or cnm like <given value>
endif
I mean whatever value is being given; it should be part of where clause.For it i am going to :
EXAM2@orcl> CREATE OR REPLACE PACKAGE rollsearch AS
2 TYPE t_cursor IS REF CURSOR;
3 Procedure rol_cursor(c_rol in varchar2,c_cnm in varchar2,c_fnm in varchar2,
4 c_mnm in varchar2,d_dob in date,n_year in number,c_exam in varchar2,c_main_supp in varchar2,
5 io_cursor IN OUT t_cursor);
6 END rollsearch;
7 /
EXAM2@orcl> CREATE OR REPLACE PACKAGE BODY rollsearch AS
2 Procedure rol_cursor(c_rol in varchar2,c_cnm in varchar2,c_fnm in varchar2,
3 c_mnm in varchar2,d_dob in date,n_year in number,c_exam in varchar2,c_main_supp in varchar2,
4 io_cursor IN OUT t_cursor)
5 IS
6 v_cursor t_cursor;
7 sql varchar2(1000);
8 BEGIN
9
What should i write further; so that i may get ref cursor as whereed clause for given value. So that i may populate my datagrid view for that web form.
I have this stored procedure and sequences:
create sequence a_seq;
create sequence b_seq maxvalue 26 cycle;
create sequence c_seq maxvalue 1000 cycle;
create or replace
procedure inserta_en_B (numregistros in integer) as
ultimo_año_nuevo date := trunc (sysdate,'year');
dias_transcurridos number(3) := sysdate - ultimo_año_nuevo;
begin
[code]........
First i insert into b 400000 rows using:
execute inserta_en_b(400000));
commit;
But then i need to insert 100000 rows more using the stored procedure and without removing the 400000 rows stored before. I think i need to use the commit clause, but i dont know where.
How to how to get this sql to work?
select a.in_house_ref
from media_item a
where
((&rack is null) or a.in_house_ref in (&rack));
--a.house_media in ('CH127600','BF101042'), example values
I've tried the a.in_house_ref in (:rack) by itself and that doesn't work for the values above and hence changed it to (&rack) and that works. The issue I run into now is that the the paramater can be null, ie., no values need be entered by users and hence I put the is null statement. When I run the full statement above, oracle returns an error, i.e. , ORA-00936: missing expression.
insert into cte
with cteas
as
(
select hit from radial,gib
where no=id
)
[code]........
i want to update the values based on with clause so i used like above.but it is time consuming so i planned to use cursor . is it effective or any other methods avail for the above. How to write cursor and use for the above ?
CREATE TABLE TEST
(
TEST_CASE NUMBER,
ATTRIBUTE VARCHAR2(1000 BYTE),
ATTRIBUTE_ID NUMBER,
VALUE VARCHAR2(1000 BYTE),
PERATOR VARCHAR2(1000 BYTE)
)
[Code].....
OUTPUT NEED TO BE TO STRING.
WHERE ATTRIBUTE_ID = 30640 AND VALUE IN ('A','B','C') AND ATTRIBUTE_ID = 30744 AND VALUE BETWEEN 7 AND 9
WHERE ATTRIBUTE_ID = 31110 AND VALUE IN ('100')