Whey I try to run this query in TOAD I get an ORA-00920: invalid relational operator error. It's part of a 10g stored procedure. When I highlight it and run it it prompts me for the missing values and then the error pops up. The AND in line 4 is highlighted.
select CRIME_CLASSIFICATION_ID, crime_type, nvl(count(CRIME_CLASSIFICATION_ID),0) as CRIMECNTFrom vaps.vw_offenses where regexp_instr(valoc,to_char(location_id)) AND ( fromdate is null or offense_date between to_date(fromdate, 'mm/dd/yyyy') AND to_date(todate,'mm/dd/yyyy'))group by crime_classification_id, crime_type
I have below query which uses between clause. For some constraints I cannot use between clause so this need this to converted to use only relational operator.
select * from TABLE1 where "+ width +" between start_width " + "and end_width and "+ height +" between start_height " + "and end_height " + "and id = "+ id
i am working on a project that requires the creation of a object relational database. A number of different methods are required in order to insert different toy types into the appropriate toy related Object Table(s). Within this there will be the following fields:
Toy_name Cost Age_Range rdy_allocation
and then some more specific information. The specific information for each toy is:
Toy_Type. The toy_type can be electronic, game, or wooden. For electronic I need to store Battery_Type and Number_of_Batteries. For type Game, I need to store, Type, this could card_game, board_game or other_game. For type wooden, I need to store Painted(Y/N).
The toys are requested by a child and created by elfs. This information also needs to be recorded but im more concerned with the creation of the toy class itself first. Now this was my first attempt at the solution but I cant seem to link the specific toy information into the same table. Will i have to create three separate tables then link them together?:
DROP TABLE TOY_OBJTAB; DROP TYPE electronic_toy; DROP TYPE wooden_toy; DROP TYPE board_toy; DROP TYPE toy_typ; [code]....
CREATE TABLE Rel_Module ( Id NUMBER (6) PRIMARY KEY, Type CHAR (7) NOT NULL,
[Code]...
How I can easily load data into this new REL_MODULE table either using SQL or PL/SQL (e.g., Procedures, Functions, and Triggers). I don't need to write so many INSERT statement.
when I execute this I get an output of $123.50...I want to use other speacial characters like @,* instead of $...But I am getting invalid identifier error if I use any special character other than $.
INSERT INTO t_category m( m.service_id, m.customer_id) SELECT u.service_id, (SELECT p.add_data FROM t_add p WHERE p.service_id=u.service_id AND p.add_type='CUSTOMER_ID') FROM t_iservice u
I got this error: ORA-01722: invalid number. The problem is m.customer_id has data type NUMBER, p.add_data is VARCHAR.
PROCEDURE XCOM_X060_UPDATEOHBFAILURE( in_CALL_ID IN NUMBER, in_SPLY_REORD_NO IN CHAR, in_OHB_QTY_CARTONS IN NUMBER, in_OHB_QTY_UNITS IN NUMBER, in_SPLY_TOT_OHB_QTY IN NUMBER, in_OHB_INPUT_CTNS_MIN IN NUMBER, in_OHB_INPUT_CTNS_MAX IN NUMBER, in_UNITS_PER_CARTON IN NUMBER, in_OHB_INPUT_UNIT_CONSTANT IN NUMBER, in_TOTAL_CARTONS IN NUMBER, out_ALLOW_OHB_INPUT_FLAG OUT CHAR, out_ERR_CODE OUT NUMBER, out_ERR_MESSAGE OUT VARCHAR2)
When the stored procedure is executed it is throwing following exception OTHERS EXCEPTION in XCOM_X060_UPDATEOHBFAILURE - SQL -1001 SQLERRM: ORA-01001: invalid cursor
Here is the execution script DECLARE IN_CALL_ID NUMBER; IN_SPLY_REORD_NO VARCHAR2(32767); IN_OHB_QTY_CARTONS NUMBER; IN_OHB_QTY_UNITS NUMBER; IN_SPLY_TOT_OHB_QTY NUMBER; IN_OHB_INPUT_CTNS_MIN NUMBER; [code]...
There is no cursor used in the procedure. It just inserts records in the table for given input values.
I have a problem when executing the statement below querying a specific ID# in view
select * from VW_MML_LTR_MSTR where LTR_ID = 26 order by CLNT_CDE ,LTR_GRP, ltr_purp_id, LTR_CDE
I checked the data type acquired by the view and the table involved and confirmed that it was of number type.Weird thing for me is that I changed the where statement as
where LTR_ID LIKE 26 where LTR_ID != 25
Is this on the database settings? What should be done here?
The following query gives me "Invalid Identifier error: ORA-00904.
SELECT TMADMIN.pkg_twatch_invdb.Max_Trk_Date(tmadmin.sites.study_id,tmadmin.sites.site_id, 1000280)) "Qualified Date" FROM tmadmin.sites "tmadmin' is the Schema Name "pkg_twatch_invdb" is the package name "max_trk_date" is a function inside the package (returns date)
I am using the same format for other function, it doesn't give any errors.
i was written query for nth highest salary from emp table...i get error
1 select distinct (a.sal) from emp a where 2* &N = (select count (distinct(b.sal) from emp b where a.sal <= b.sal); 3 / Enter value for n: 2 old 2: &N = (select count (distinct(b.sal) from emp b where a.sal <= b.sal); new 2: 2 = (select count (distinct(b.sal) from emp b where a.sal <= b.sal); 2 = (select count (distinct(b.sal) from emp b where a.sal <= b.sal); * ERROR at line 2:ORA-00911: invalid character
select ROUND( ( SUBSTR(' m1058,1672|1090,1672|1090,1716|1058,1716 x e', 2, instr(' m1058,1672|1090,1672|1090,1716|1058,1716 x e',',',1,1)- 2) + SUBSTR(' m1058,1672|1090,1672|1090,1716|1058,1716 x e', instr(' m1058,1672|1090,1672|1090,1716|1058,1716 x e','|',1,2)+1, instr(' m1058,1672|1090,1672|1090,1716|1058,1716 x e',',',1,3) - (instr(' m1058,1672|1090,1672|1090,1716|1058,1716 x e','|',1,2)+1)) )/ 2) AS x from dual;
I'm teaching myself to write stored procedures, working in TOAD 10.5 with Oracle 10g. I keep getting error ORA-00900: invalid SQL Statement. Here's the code, cut down to bare minimum sample size. I can't see where I'm doing anything wrong.
If I cut out the cursor (taking it down to just "Begin" and "End"), it does run, but I can't see anything wrong with the cursor.
CREATE OR REPLACE PROCEDURE IN_PROCESS_CASES_BOS IS V_HELLO VARCHAR2(10); CURSOR C_MAIN IS SELECT 'HELLO' FROM DUAL;
I am trying to create two tables and I am getting the "ORA-00911: invalid character" Error. I have been trying to work it out for last past 30 minutes to no success.
Error report: SQL Error: ORA-01427: single-row subquery returns more than one row 01427. 00000 - "single-row subquery returns more than one row" *Cause: *Action:
UPDATE XXX_CURR_EOM SET ID = (select CAPITALPLAN.ID from capitalplan, XXX_CURR_EOM where XXX_CURR_EOM.ID = CAPITALPLAN_id)
I have a pkg with a procedure that uses dbms_sql to process a varchar2_table. Each record in the table is a delimited string, such as "Priority^2", or "Destination^7". The goal is to split that string on the hat and update a record in the panelfield_users table. It works perfectly if I replace the first substr/instr on :pColumn with a hardcoded number, so I know that the binding is working to that point. It is only when I try to get the latter half of the string that it chokes. I keep getting a "invalid number" error. The displayorder field is an integer field and all values will be 3 digits or less. If I pull the sql string out into an editor, it runs just lovely.
The pertinent code is: C := DBMS_SQL.OPEN_CURSOR; DBMS_SQL.PARSE(C,'update panelfield_users set displayorder = to_number(substr(:pColumn, instr(:pColumn, ''^'') + 1)) where userid = :pUID and fieldid = (select fieldid from panel_fields where upper(panelname) = upper(:pPanel) and upper(modulename) = upper(:pModule) and upper(field_displayname) = upper(substr(:pColumn, 1, instr(:pColumn, ''^'')-1)) )
I am using this query in MERGE statement , result is also shows here
select TO_CHAR(emp_id) EMP_ID ,TO_DATE(at_date,'RRRR/MM/DD') AT_DATE,TO_CHAR(time_in) TIME_IN,TO_CHAR(time_out) TIME_OUT,TO_CHAR(status) STATUS from ( select emp_code emp_id,at_date,at_time Time_in, Null Time_out, status from ( select a.*,substr(data_row,24,5) Emp_code,substr(data_row,3,8) AT_Date, substr(data_row,11,4) At_Time, substr(data_row,15,2) Shift, substr(data_row,17,2) STatus from data_load a
[code].....
using this query in MERGE statement giving a error ora-00911 invalid character
MERGE INTO Attendance I USING ( select TO_CHAR(emp_id) EMP_ID ,TO_DATE(at_date,'RRRR/MM/DD') AT_DATE,TO_CHAR(time_in) TIME_IN,TO_CHAR(time_out) TIME_OUT,TO_CHAR(status) STATUS from ( select emp_code emp_id,at_date,at_time Time_in, Null Time_out, status from ( select a.*,substr(data_row,24,5) Emp_code,substr(data_row,3,8) AT_Date, substr(data_row,11,4) At_Time,
I am getting an ORA-00902: invalid datatype error when I am trying call the below function from a select statement. Here I am trying to get a table out from a function.
create or replace package pkg10 as type tabletype1 is table of table1%rowtype index by binary_integer; function func1 return tabletype1; end pkg10;create or replace package body pkg10 as
REVNUMBER is a VARCHAR2. I've set it to increment by letter in alphabet to note the revision of a document, i.e. IR*, A, B, C... . This works beautifully.
VERNUMBER is a VARCHAR2. I've set it to increment by number but starts from null to 'IR' to 1, 2, 3...
Until now, I've been incrementing VERNUMBER without problem if, instead of IR as the first incremented value I leave the field null. The user has asked that IR display. I've tried using IR as the default but I still need to increment from there so I don't see it making a difference between that or dumping it as the first condition of the following. The problem is I get an invalid number error either way.
*'IR' = 'Initial Release'
SELECT CASE WHEN VERNUMBER IS NULL THEN 'IR' WHEN VERNUMBER = 'IR' THEN '1' ELSE REGEXP_REPLACE(VERNUMBER, '[0-9]+$', REGEXP_SUBSTR(UPPER(VERNUMBER), '[0-9]+$') + 1) END NEW_VERSION FROM DOC_INFO WHERE DOC_INFO_ID = :P3_DOC_INFO_ID