In employees table I am having employee_name column data as follows
Aaron, Mrs. Jamie (Jamie)Aaron, Mrs. Jenette (Jenette)Abbott, Ms. Rachel (Rachel) Breton, Mr. Jean Britz, Mrs. Sarie (Sarie) --> Now, I want to display the employee name like "Mrs. Jamie" (with out Surname and with out bracket included text),-->
How to achieve this by SQL query.
I need to separate 1 field into 2 fields. The source is varchar2 and is like:
[VOUCHER]
CGJ0000617
CG0001442
CGJ0001444
CMOV0000200
CXAR00000001
CXAR00000002
Result should seperate numeric value from characters so that the result would be:
[VOUCHER_char] [VOUCHER_num]
CGJ 0000617
CG 0001442
CGJ 0001444
CMOV 0000200
CXAR 00000001
CXAR 00000002
I need one or two SQL statement.
I have a query that produces around 11 fields, and one of which is a multi-delimited field and the other 10 are dimension fields. I would like to split that field into several rows, and have the other 10 fields just repeated for each one. Here is an example of the data in the 11th field :
Column 11
34^56^78,59
There are two delimiters in the field, a carat and a comma. This field is used to reference document numbers that are needed to be sent in. The carat represents the word "Or" and the comma represents the word "And". I would like to have the output of each field to be a repeat of the 10 dimension fields, plus 3 new fields. The first new field would be the document number, the second new field would be the position within the original delimited field(1, 2, 3, etc.) , and the last field would be one of three logic words :First (if it is the first value), Or (if the value followed a carat), And (If the value followed a comma). Example of the output from the above value would be :
Column 11 Column 12 Column 13
34_______ 1_______ First
56_______ 2_______ Or
78_______ 3_______ Or
59_______ 4_______ And
Any thoughts on this? I have found a few solutions online on how to break up the delimited field into rows, but never with multiple delimiters or with extra logic for the added fields.
I Want to make a query to select finished goods product in sales having product code greater than 280 but i have face a problem that order by is not working because products column have character code as well as number. how to sort that column.
View 2 Replies View RelatedI am using this query to split numeric values i.e ('1,2,3,4,5,6')but when i am trying with char value i.e ('a,b,c,d'), its not working.
select id
FROM employee e
WHERE e.id IN
( SELECT TO_NUMBER(xt.column_value)
FROM XMLTABLE('1,2,3,4,5,6') xt );
I have TableA which has data like below.
ID NAME CRT_DTE
1 AB 03/05/1992
2 EF 15/04/1995
3 CD 20/08/1995
4 GH 01/01/1999
5 UV 08/07/2001
[code]....
I want a query which splits the total time period (from min crt_dte to max crt_dte) into year ranges.For eg, lets say a range of 5 years then I need to get results like below.
start_dte end_dte
---------- ----------
03/05/1992 03/05/1997
03/05/1997 03/05/2002
03/05/2002 03/05/2007
03/05/2007 09/03/2012
how to write this query.
I have a table with following values in a column
Table A
col1
10
35
20
25
I need to form a query which will take these four values in rownum part and split the records into 4 groups in Table B.
Table B- 90 records (10 + 35 + 20 + 25)
Now for example, the Table B is having emp no, order by ascending and i need to split into 4 groups,
with first group having start value -1 and end value -10
second group - start value -11 and end value-45
third group - start value -46 and end value -65
fourth group - start value - 66 and end value-90
one way i can do it by using union and count, which was a bit tedious if the no. of group goes upto 10.
note that the values in Table A is dynamically changing, so not able to hard code values.
I have inherited a query that union alls 2 select statements, I added a further field to one of the select statements ( a date field). However I need to add another dummy field to the 2nd select statement so the union query marries up I have tried to do this by simply adding a
select
'date_on'
to add a field called date on populated by 'date_on' (the name of the column in the first query)
however when I run the union query i get the error Ora-01790 expression must have same datatype as corresponding expression.
I am having a Select query(below Query1) and I want to use one column(sum(col4)) from this Select query to be displayed in another Select query(Query 2). how to display this.
Query 1 :-
select a.col1,a.col2,b.col3,sum(b.col4)
from tab a, tab b
where a.key1=b.key1 and a.key2=b.key2
group by a.col1,a.col2,b.col3
Query 2 :-
select a.col1,a.col2,b.col3,sum(b.col6)
from tab a, tab b
where a.key1=b.key1 and a.key2=b.key2
group by a.col1,a.col2,b.col3,b.col5
i have a single form three database field
i want when i open a form in exceute mode then only a single field it does not show any data from database
means query not allowed in that particular field
how it is posible
What is the trigger which should be used to check certain field value after posting the query.
Example:
I have executed the query and the records are fetched. There is one field I want to check if it is null then it should be enabled, else, keep it disabled.
I have a table:
create table FIELDS
(
FIELD_NAME VARCHAR2(30) not null,
PRG_FIELD NUMBER not null,
LENGTH NUMBER
);
with
INSERT INTO FIELDS VALUES('FIELD1', 1, 3);
INSERT INTO FIELDS VALUES('FIELD2', 2, 3);
INSERT INTO FIELDS VALUES('FIELD3', 3, 4);
INSERT INTO FIELDS VALUES('FIELD4', 4, 2);
INSERT INTO FIELDS VALUES('FIELD5', 5, 1);
I need to insert in a table:
create table STUFF
(
FIELD_NAME VARCHAR2(30) not null,
FSTART NUMBER not null,
LENGTH NUMBER
);
And the output I want is:
INSERT INTO STUFF VALUES('FIELD1',0,3);
INSERT INTO STUFF VALUES('FIELD2',3,3);
INSERT INTO STUFF VALUES('FIELD3',6,4);
INSERT INTO STUFF VALUES('FIELD4',10,2);
INSERT INTO STUFF VALUES('FIELD5',12,1);
So each field starts where the previous (ordered by PRG_FIELD asc) ends.
I think the query should use both lag and connect by but I haven't had any luck writing it. The problem is that all the examples I've seen around, using connect by prior, utilize 2 fields with different names, es connect by prior emp_id = mgr_id. Instead I should do something like connect by prior prg_field = prg_field-1 but that doesn't seem to work.
PS: I don't necessarily need to do this, I have a guy manually writing the inserts, this is just an exercise I would like to figure out
i have a doubt in building a query.
I have a table with fields
job_no activity Date
101 anchorage 20/01/2010
102 berthing 25/01/2010
103 sailing 29/01/2010
If i want to know the status of the ship on the date '22/01/2010' It has to show as 'anchorage', becoz on '25/01/2010' only it came to berthing from anchorage. How to write a query to achieve this.
We are using APEX 4.2, 10GR2, RedHat5.
I have a report that comes from SQL Query (updateable report). I'm using the apex_item.text and apex_item.hidden on fields. I'm using a button to submit and after submit process to add some logic that I need.
There could be 1 - 10 records in the report. There is only 1 field that is needed to enter a value, but the value of this field determines the value of another field. I think that I can do this with a submit button and an after submit process where I loop through all the records. I think I have this handled.
This is the question
When the value of that field is changed then the value of another field in the same row changes immediately. All the examples I've seen so far are for a single record and that doesn't work for us.
I guess this is a MRU process but I haven't seen an example where a dynamic action is possible on a Multi Row Update.
I am having a problem with a popup lov. When I click on the "popup icon" I can select a supplier and it is stored in the field. But when I leave the form and return later, it shows the return value instead of the display value. For example: you select "supplier A" from the popup list with ID 12. "Supplier A" is shown in the text field, when you save the form, it stores ID 12 in it. But when you return to the form, it fetches ID 12 and shows "12" in the text field instead of "Supplier A".
I tried setting the "source" of the popup lov field as an SQL query, but that didn't work for me.
I was looking for application column name corresponding to "Draft Invoice Number" ra_interface_lines_all table.
I tried the below.
/* Get descriptive_flexfield_name for the application table name*/
SELECT *
FROM FND_DESCRIPTIVE_FLEXS_VL
WHERE application_id = 222
AND APPLICATION_TABLE_NAME=upper('ra_interface_lines_all');
/* Get the application column name and end user column name*/
SELECT *
FROM FND_DESCR_FLEX_COLUMN_USAGES
WHERE application_id = 222
AND descriptive_flexfield_name = 'RA_INTERFACE_LINES';
There are many DESCRIPTIVE_FLEX_CONTEXT_CODEs obtained. I could finally trace out that draft invoice number corresponds to INTERFACE_LINE_ATTRIBUTE2. How can I know what DESCRIPTIVE_FLEX_CONTEXT_CODE should I look for?
I want to build a single query to fetch the application column name and flex field name for a specific table .
Even though i am using COL1 CHAR(500) NULLIF COL1=BLANKS, then also i am getting same error for those columns.
View 13 Replies View RelatedI have the following case to solve:
Example Table:
Nr_ordPos1Pos2Itemqty
O4018510000107 170,00
O4018520000107 30,00
O40651010000107 500,00
O40651020000107 50,00
O4114510000107 300,00
O31141010000107 50,00
O3114520000107 50,00
I need to create a query that returns record by record a field qty_progr with the cumulate qty considering previous records. The result should be the following:
Nr_ordPos1Pos2Itemqty qty_progr
O4018510000107 170,00 170,00
O4018520000107 30,00 200,00
O40651010000107 500,00 700,00
O40651020000107 50,00 750,00
O4114510000107 300,00 1050,00
O31141010000107 50,00 1100,00
O3114520000107 50,00 1150,00
I have a table where i need to update one field values based on another field of the same table , simply as it is.I have done this using one select all check box , on clicking that all check boxes of item_trans table will get selected , then i will un select some of check box and then using one button, i will update the value of the fields which are checked only.
I have put the sample code but when i am updating its taking long time and hanging.I am also attaching the form based on the test case provided.
--tables with insert statement
create table item_trans (trans_item varchar2(12),trans_qty number,trans_act_qty number)
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE1',40,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE2',20,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE3',20,NULL);
--i want to set the value of trans_Act_qty as trans_qty
--i create one dummy or test block to keep the select all check box. for that table test script is
CREATE TABLE TEST
(
C VARCHAR2(2000 BYTE),
B NUMBER,
A NUMBER
);
insert into test (C,B,A) values ('A',1,1);
--code written in select all check box which is created on test.block.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
:M_END_YN := :M_END_ALL;
[code].......
--code written in M_END_YN ( actual check boxes where i will uncheck).
IF :M_END_YN = 'N' THEN
:M_END_ALL := 'N';
END IF;
--code written on button to update those values which are checked.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
IF :M_END_YN = 'Y' THEN
[code]......
I am New to Apex. Im using Apex Version 4.2.
I have a tab named APPROPRIATIONS it has 10 fields. Among which is PROJECT NUMBER, AUTHORIZAION DATE (CALENDER TYPE POPUP), And FUNDS CHECK FLAG.
The Scenario is depending upon PROJECT NUMBER the Fields are Populated including FUNDS CHECK FLAG .
But the AUTHORIZAION DATE is a MANDATORY field has to be filled by User
The Requirement is to make AUTHORIZAION DATE as MANDATORY only when the FUNDS CHECK FLAG is *"BLANK "* or *“Y”*
If the FUNDS CHECK FLAG is *“N”* then the AUTHORIZAION DATE to be made OPTIONAL.
I need to update a field with the 1st 9 characters of another field in the same record.
View 1 Replies View RelatedI have a table called Customer_Type with following fields
Customer_type ,Active_date, Inactive_date
regular,11/01/2011
daily,11/04/2011
monthly,11/05/2011/11/11/2011
Tbale 2:Customer
Customer_name,Customer_type,Customer_Inactive_date
John,regular,
James,monthly,
Jake,daily,
Jill,monthly
What i wnat is to update the Customer_inactive_date with the Incative_date field from Customer_type based on their Customer_type... So james and Jill would have their rows updated in this scneario ..How can i achive this in pl/Sql
I have teh code using merge function..I want something in traditional old fashion..
The sql statements are below
CREATE TABLE CUSTOMER_TYPE
(
type_code VARCHAR2(10),
[Code]....
i'm working on this database assignment...and basically, no matter what I do my table seems to automatically split into a different table after 8 rows...i've tried googling it and using commands like....
set wrap off;
set numwidth 20;
and fiddling with the format of each column but nothing seems to work...i just want my table to show as one table
here's my script
create table patient
(patient_number number(4) primary key,
patient_name varchar(15) NOT NULL,
address varchar(30) NOT NULL,
telephone number(7) NOT NULL,
patient_status char(1) NOT NULL,
next_appt date,
balance number(5,2),
CHECK (balance >= 0),
CHECK (patient_status='N' OR patient_status='A' OR patient_status='I'));
[code]...
12 rows selected.the columns are actually aligned so don't worry about that...it's just the splitting of the rows.
I have strings like
1) ICE_10001 ICE_10002 ICE_10003
2) ICE_10005 ICE_10006
i want to split above strings like
1)ICE_10001
2)ICE_10002
3)ICE_10003
4)ICE_10005
5)ICE_10006
If it is possible in oracle sql
PROCEDURE COLUMN_SPLIT (p_def IN VARCHAR2, p_sch OUT VARCHAR2, p_table OUT VARCHAR2, p_column OUT VARCHAR2)
IS
BEGIN
NULL;
END;
END;
I want to split p_def by dots, check for 3 elements, and return them in p_sch, p_table and p_column for example p_sch will be like hello.howare.you.I want to split it to hellohowareyouI have very limited knowledge with pl/sql.
I have a string like '9999999;A' one field as numeric & other as char.Now i want to split this string into two values removing the ; delimiter in oracle using for loop.
View 2 Replies View Relatedi have a column called name in a table. now what iwould like to do is to check if it has two parts "paulh some" and then output the second part!
SELECT LTRIM(name,' '), length(name) length
FROM list
WHERE INSTR(name,' ') = 1;
but that doesnt work.. the fucntion is NOT checking for the space! if i use another character (a or b etc) it works..
I have a field called fullname that outputs records with fullname of people.
Here is what I have when I do this sql:
Select fullname from tableOne;
John Jones
Bill Aronsen
Sam Baker
George Williams
Dave Smith
I would like to sort in order of last name but cant figure out how to do the sql:
Bill Aronsen
Sam Baker
John Jones
Dave Smith
George Williams
how I can change this function to pass argument that length is 32676 .
create or replace TYPE "HRS_SPLIT_TBL_T" as table of varchar2(32767);
create or replace function hrs_split
(
p_list varchar2,
p_del varchar2 := ','
) return hrs_split_tbl_t pipelined
is
[Code]...
I got error String literal too long when execute select below
select distinct COLUMN_VALUE Tbat_latn
from table(
HRS_SPLIT( 'PER0000002,PER0000094,PER0000094,PER0000096,PER0000096,
PER0000024,PER0000024,SAB0000001,SAB0000001,PER0000002,
PER0000096,PER0000094,PER0000094,PER0000002,PER0000024,
PER0000024,PER0000096,PER0000096,PER0000094,PER0000094,
PER0000002,PER0000024,PER0000024,PER0000096,PER0000096,
PER0000094,PER0000094,PER0000002,PER0000024,PER0000024,
[Code]....
I want to split any user given string into two parts, how can I do it.
suppose some sample inputs may be:
'123456' splits into '123','456' ,'123456789' splits into '12345','6789'
NOTE: the first half splitted string length is greater in case of odd no. string as in second example
How can I do it?