Oracle - DB2 Bi-Directional Sync?
Feb 18, 2011
I am working for an agency which needs to synchronize(bi-directional) a master-master database configuration (Oracle <-> DB2) between sites hosted in Washington ,DC and Europe.
We are doing high level estimates right now of in-house development , Oracle Golden Gate and DBMOTO, MQ...etc with bi-directional synchronization with Oracle and DB2 in decentralized geographic locations?
Or production level experience(perf. issues, maintenance ..drawbacks) with any of the products mentioned.
View 1 Replies
ADVERTISEMENT
Sep 18, 2013
platform: linux64 + glassfish I run msync as a client on the same server, but on the mobile manager web page, only download sync publications history can be found. What shall I do to sync local Berkeley database content to oracle?Do I need to create upload sync publications? Do I need to use mobile server workbench to create new applications?
View 1 Replies
View Related
Jun 27, 2013
i have my oracle 10g database on my windows 7 and i install sql server 2005 on my windows server 2003 .now i want to sync my oracle 10g database with my sql 2005 means whenever i make any changes in my oracle table its automatically effect in my sql server also.
View 1 Replies
View Related
Aug 22, 2010
For using replication in our production, here i am testing golden gate as replication tool. I tested all scenario in Uni direction ( source to destination). Now have to test replication with DDL support in Bi-Direction. Not getting any Doc for doing replication in Bi-direction( Two Way). If any one has done the same, then please share limitation of replication in Bi-direction through Golden Gate.
View 7 Replies
View Related
Jan 23, 2013
When a user session commit he is waiting on 'log file sync' untill LGWR sends the message back to user session after writing log buffer content into redo log file.As far as i understand this is serialize operation(one at a time).
So how come i have 7 ms average 'log file sync' wait time and i can still perform 200 commits per sec ?
7 ms * 200 waits = 1400ms = 1.4 sec
View 2 Replies
View Related
Mar 6, 2008
I'm trying to work out how to synchronize a source and target database in an Oracle CDC implementation. We're in the architecture design stage of a near-real-time Operational Data Store style solution. Both the ODS and our pilot source system will be Oracle 10g. Our plan is to use Oracle Asynch Hotlog Change Data Capture to capture change data in near-real-time so that it can be applied to the ODS.
I understand the CDC apply process once the ODS and Source System are synchronized: DBMS_CDC_SUBSCRIBE.EXTEND_WINDOW to release the next window of change data, select from the publish views, then DBMS_CDC_SUBSCRIBE.PURGE_WINDOW to register the change data is no longer required.
But how do we do the initial synchronization if the source system is live and contains data and the ODS is new (and empty)? The easiest way would be to somehow flag EVERY row as change data. eg. Truncate every table and import. This would not be so good for existing CDC subscribers.
A more logical way would be to:
- Take a hot backup of the live prod database
- Activate CDC (DBMS_CDC_SUBSCRIBE.ACTIVATE_SUBSCRIPTION) on the source system to start tracking changes
- Manually build the ODS from the snapshot
- Start applying changes from CDC
if the source system is live, how can we GUARANTEE that the first 2 steps (snapshot and ACTIVATE_SUBSCRIPTION) are performed at EXACTLY the same time (ie. same SCN)?
View 1 Replies
View Related
Jun 29, 2011
If one of the redolog member corrupted and overcome this problem, I had removed the corrupted redolog member. Later I had added a new member to this group.
I would like to know, is the newly added log member will get sync with existing log member? How the newly added log member get sync with existing log member?
View 1 Replies
View Related
Mar 22, 2013
os version is solaris 10
db version 11.2.0.3
how to tune log file sysnc waits in 11gr2 what parameters are involving in tuning log file sync and what would be its optimal values.
View 9 Replies
View Related
Mar 26, 2013
We have siebel server on windows machine and db server on unix box. We have done some modification(added columns) in siebel tools level. Now we want to ddl synch through command line prompt. how ot do ddl sync?
View 4 Replies
View Related
Dec 7, 2012
We are having 10gR2 DR setup,
We are planning for the cold backup of primary database on every sunday,
Does it going to affect DR sync if primary database is not availabe at the time of cold backup.
View 2 Replies
View Related
Mar 10, 2013
I have few queries regarding standby database.
1)On primary Database Standby Redo log is required for switchover and on standby database Standby Redo log is required for
--Real time Apply
--Maximum protection or Maximum availability
Am I correct?
2)My database is in Maximum Performance mode. I set up following entry on init.ora:
LOG_ARCHIVE_DEST_2='service=standby LGWR ASYNC'. My question is do I need to have STANDBY Redo log file on standby database in order to use LGWR transport (LGWR ASYNC)mode from primary? Without Standby redo log on standby database can it transport redo data from primary to standby using LGWR transport mode (LGWR ASYNC)?
3)I have changed from the "ARCH" attribute to "LGWR" attribute of the LOG_ARCHIVE_DEST_n initialization parameter. But I have not changed the protection mode. I would like to know whether is there any impact in the behavior of the database, if we do not change the mode from "MAXIMUM PERFORMANCE" to "MAXIMUM AVAILABILITY"?
View 1 Replies
View Related
May 8, 2013
Think that emp as an oltp table i want to sync the data from emp to emp_target table daily(sysdate - 1) records
SQL> create table emp_target as select * from emp where 1=2;
Table created.
View 9 Replies
View Related
Feb 12, 2013
OS: Solaris
DB: Oracle 11.2.0.1 EE
Not Using ASM or RAC
I have a Production database that is in archivelog mode and a Standby DR server. Both servers (Prod, Standby) have exact same structure and db name/version.
We manually scp archive logs and recover them to a manual standby database via SQL Scripts "cron". (I.E. set autorecovery on; recover standby database;)
We recently got out of sync with our log files and have not been applying them to the standby. As part of Prod Maintenance, these log files were deleted and are not available anymore.
I've tried several ways to "rebuild" our standby database. I have tried to Shutdown prod, backup all the db files and scp them to standby, re-create standby controlfile and startup mount and recover standby. Every time I try to apply a new archive log via recover standby, these are the errors:
ORA-00279: change 211077622 generated at 1/27/2012 12:18:42 needed for thread 1
ORA-00289: suggestion : /oradump/arch/PROD/PROD_arch_1_69486_736618850.arc
ORA-00280: change 211077622 for thread 1 is in sequence #69486
ORA-00308: cannot open archived log '/oradump/arch/PROD/PROD_arch_1_69486_736618850.arc'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-10879: error signaled in parallel recovery slave
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/oradevices/PROD/oraPRODsystem1.dbf'
When I check v$log_history, the new logs have not been applied. I've also tried the "Restore from incremental backup via SCN" method with same results. Is there a way to re-create the standby clean and ensure that the log chain that is currently broken gets fixed or reset? I would eventually like to get DataGuard in here, but that's not the case at the moment.
View 5 Replies
View Related
Dec 11, 2012
How to configure Oracle EM with newly created Oracle Instance on Oracle 10g DB,which is Single Instance DB but not RAC ,when I start the Oracle EM it is starting the default DB which created during Oracle Server Installation.
View 0 Replies
View Related
May 17, 2011
But i do a lot of work-arounds to make sure the installation does not make corrupt my OracleAgent,OracleService and OracleDataGatherer. If i just let the installation do its thing i have problems with my libraries, and can't start anything.
The errors are : Procedure entry point 'BlaBla' could not be located in the Dynamic Link library 'AnyName'.
I notice that i have 2 versions of the libraries in OracleHomeBIN (one version 8, one version 11). The programs that start the OracleAgent,Service and DataGatherer call the old libraries but expect to find values that can be found only in new libraries.
View 1 Replies
View Related
Jun 13, 2012
I have a requirement to put together a Oracle SQL template to create re-usable DDL/DML Scripts for Oracle databases.Only the Oracle DBA will be running the scripts so permissions is not an issue.
The workflow for any DDL is as follows:-
1) New Table
a. Check if the table exists from the system/admin views.
b. If table exists then give message "Table Exists"
c. If table does not exist then execute DDL code
2) Add Column
a. Check if Column exists for a given table from system/admin views
b. If column exists in the specified table,
b1. backup table.
b2. alter table to make changes to the column
b3. verify data or execute dml script convert from backup to the new change.
c. If Column does not exist
c1. backup table
c2. alter table to add column
c3. execute dml to populate column with default value.
The DML scripts are for populating base tables with data required for business operations.
3) Add new row
a. check if row exists by comparing old values of each column with new values to be added for the new record.
b. If exists, give message row exists
c. If not exists, add new record.
4) Update existing record (We have createtime columns in these tables so changes can be tracked)
a. check if row exists using primary key.
b. If exists,
b1. deactivate the record using the "active" column of the table
b2. Add new record with the changes required.
c. If does not exist, add new record with the changes required.
View 17 Replies
View Related
Aug 8, 2012
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies
View Related
Jun 27, 2013
I would like to update an XML element without using the function APPENDCHILDXML or INSERTCHILDXML because they are not available in Oracle 10GR1.
In my database, Oracle XDB is not installed.
The following query fail with the following error : ORA-00904: "INSERTCHILDXML" : identificateur non valide
update scl_profile
set profile_data =
insertChildXML(profile_data,'/exportImportMarcheCriteria','colonnesExport',
XMLType('<colonnesExport>ENTETE_GESTIONNAIRES_AUTORISES</colonnesExport>'))
where profile_xmltype =
'fr.mipih.marches.marche.criteres.ExportImportMarcheCriteria'
and profile_type =
'eMagh2.MRGS.AccesMarche.ListeMarche.Export.OptionsExportImport';
[code]........
If i try to use the package DBMS_XMLDOM, i have the following error :
ORA-06550: Ligne 3, colonne 11 :
PLS-00201: l'identificateur 'DBMS_XMLDOM.DOMDOCUMENT' doit etre declare
ORA-06550: Ligne 3, colonne 11 :
PL/SQL: Item ignored
I think it's because ORACLE XDB component is not installed in my database.
View 1 Replies
View Related
Aug 7, 2012
This time i am downloading the Oracle 11g and then the Oracle APEX...(they are not in one package...right ? i mean they both have to download separately)i really new in oracle / PL/SQL. I'm not a programmer but i interest about database programming.For now i still use Ms. Access to develop an aplication and i really suprised i found this Oracle APEX because it an RAD tool too same as Access but more powerfull i think.
View 2 Replies
View Related
Mar 7, 2007
I am trying to connect to Oracle from another server that does not have any Oracle applications on it.
I tried Perl, PHP, Java but each require parts of Oracle installed.
View 2 Replies
View Related
Jul 8, 2011
I am working on an application which is on Oracle forms and Reports 6i.It connects to a database which is Oracle 9i. My client wants to upgrade the Database to Oracle 10gR2 or Oracle 11g. I searched in many forums and also saw in Interoperability table which says it is not compatible. But some users are using it fine.
View 1 Replies
View Related
Feb 4, 2012
Can I directly upgrade Oracle 9.2.0.1.0 From RHEL-4 platform to Oracle 11g Rel 2 on RHEL -5 platform?I have the export dump and cold backup of Oracle 9.2.0.1.0 database.
View 11 Replies
View Related
Dec 3, 2012
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies
View Related
Jul 12, 2013
I have problems to log in to Oracle?What name should I use for log in?
View 1 Replies
View Related
May 29, 2008
I want to manage database (create table ,insert data ,delete table etc ) by using tool in oracle 10 g similar to a OEM in oracle 9 i in order to manage the database simply and not using SQL command
I used to open OEM in browser but I don't know to manage my database method by using OEM . In a screen I find many function for example Host CPU Active session etc but I can't find function are about create database create table etc . And this is my question
How I did open OEM in order to manage database (create table ,insert data ,delete table etc )?
View 1 Replies
View Related
Jun 20, 2013
Is there anyway to know rowid in oracle10g when i know block number?
View 7 Replies
View Related
Jan 29, 2013
, does oracle 11g XE 64 bit with database and client for Windows 8pro is available?
View 2 Replies
View Related
Nov 23, 2006
While installing oracle 9i on windows XP. Oracle database configuration agent fails.
And it throws following error message.
java.lang.NoClassDefFoundError: oracle/sysman/emSDK/common/nls/MessageBundle
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.loadAllInitParams(Compiled Code)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.initialize(InitParamAttributes.java:313)
at oracle.sysman.assistants.dbca.backend.InitParamAttributes.<init>(InitParamAttributes.java:255)
[code]........
View 3 Replies
View Related
May 9, 2011
this is just a generic question. If a table has multiple Indexes on it say a table of 20 columns where 8 columns have indexes on it (each columns out of the 8 has an index on it and out of which three columns contain unique indexes on it).
If i run a query on this table where only two columns are specified in the where clause are the remaining 6 indexes on the table scanned during query execution.
View 1 Replies
View Related
Apr 18, 2008
I am facing problem with a select query in oracle 10g database from vb.net.It was working for oracle 9. The select statement I have written is as follows
Str=" select UCC.table_name, UCC.constraint_name, UCC.column_name, UCC.position, UC.constraint_type " & "from USER_CONS_COLUMNS UCC,USER_CONSTRAINTS UC " & "where (UCC.constraint_name = UC.constraint_name) " & "and UC.constraint_type = 'P' " & "and UCC.table_name = " & " '" & TableName & "'"
View 2 Replies
View Related
