If one of the redolog member corrupted and overcome this problem, I had removed the corrupted redolog member. Later I had added a new member to this group.
I would like to know, is the newly added log member will get sync with existing log member? How the newly added log member get sync with existing log member?
I am facing some challenge while running update query on newly added column in existing table.
Environment Details
Oracle 9i, version 9.2.0.6
Os Unix Aix 6.1
No of records in table : 12572770
Below are the step i followed.
1. In table testtablename, I have added new column COLUMNNAME29 with datatype VARCHAR2(8).
2. After adding the new column, i executed the update query to populate the data form COLUMNNAME1 to COLUMNNAME29.
3. The query is executed using COLUMNNAME24 in where clause, to drive query in index based.
SQL> desc testtablename
Name Null? Type
----------------------------------------- -------- ----------------------------
COLUMNNAME1 VARCHAR2(8)
COLUMNNAME2 CHAR(1)
COLUMNNAME3 CHAR(1)
COLUMNNAME4 VARCHAR2(8)
COLUMNNAME5 VARCHAR2(11)
[Code]...
Table altered.
SQL> select index_name, column_position, column_name from dba_ind_columns where table_name = 'TESTTABLENAME' order by index_name,column_position;
INDEX_NAME COLUMN_POSITION COLUMN_NAME
------------------------------ --------------- --------------------------------------------------
IDX_TESTTABLENAME 1 COLUMNNAME24
Problem faced & My analysis
1. The update query is hanging in database, it's not progressing (In single update, approximately 40000 records will get update)
2. No oracle error thrown in alert log or in session where the query being executed.
3. The event for the query is "db file sequential read".
4. When i update the newly added column COLUMNNAME29 with static value "1", the update completed successfully in few seconds.
5. Then i changed the static value to "1111" and executed the update statement, which result to query hanging in database.
6. I tried to update the existing column(COLUMNNAME1) in table with static value "1111", the update completed successfully.
Below are the queries completed successfully
Update Testtablename
Set Columnname29 = '1'
Where Columnname24 >= To_Date('01-12-2002 00:00:00', 'DD-MM-YYYY HH24:MI:SS' )
And Columnname24 < To_Date('01-01-2003 00:00:00', 'DD-MM-YYYY HH24:MI:SS')
[Code]...
Below are the queries hanging in database
Update Testtablename
Set Columnname29 = Columnname1
Where Columnname24 >= To_Date('01-12-2002 00:00:00', 'DD-MM-YYYY HH24:MI:SS' )
And Columnname24 < To_Date('01-01-2003 00:00:00', 'DD-MM-YYYY HH24:MI:SS')
Update Testtablename
Set Columnname29 = '1111'
Where Columnname24 >= To_Date('01-12-2002 00:00:00', 'DD-MM-YYYY HH24:MI:SS' )
And Columnname24 < To_Date('01-01-2003 00:00:00', 'DD-MM-YYYY HH24:MI:SS')
Below is character set in database
SQL> select * from v$nls_parameters;
PARAMETER VALUE
---------------------------------------------------------------- ----------------------------------------------------------------
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
[Code]....
We have a Production Oracle 10g R2 RAC on HP-UX v2 IA64 servers.We have Two Disk Groups one for Archive (ARC_DISK - 100 GB) and other for Database(DATA_DISK - 1 TB]. We wanted to add more space to the DATA_DISK disk group.Unix admin configured 200 GB from SAN and changed the ownership of the Disk to oracle and permissions to 775 on 1st Node.I opended DBCA from 1st Node and was able to see the disk in 'Show Candidate'.
I added this disk to the DATA_DISK disk group and clicked OK but got ORA- error with some message like some operations could not be performed. I exited DBCA.We realized that we had forgotten to change the ownerhip and permission from the 2nd Node.Unix admin changed the ownership of the Disk to oracle and permissions to 775 on the 2nd Node.
I opened DBCA again from 1st Node and selected the DATA_DISK disk group but could not find the Disk in 'Show Candiate' open. I clicked on 'Show All' and this disk was shown with Header_Status - MEMBER but not allocated to DATA_DISKGROUP. When I clicked the 'Show Member' option, this disk is not shown for DATA_DISK disk group. I exited DBCA at this point.As this is a critcal Production database I didnt proceed any further and exited DBCA.
Now I need to add this Disk to the DATA_DISK disk group but not sure which option to select. I got one reply from another forum to run DBCA select the DATA_DISK Disk Group and then click 'Show All' and select this Disk (which already has MEMBER as Header Status) and select Force Option and click OK to continue.
platform: linux64 + glassfish I run msync as a client on the same server, but on the mobile manager web page, only download sync publications history can be found. What shall I do to sync local Berkeley database content to oracle?Do I need to create upload sync publications? Do I need to use mobile server workbench to create new applications?
View 1 Replies View Relatedcreate type employee is object(
name varchar2(30),
member procedure change_name(new_name varchar2)
)
[Code]....
Now how to use the change_name procedure to change the name of the employees in the table?
I wanna know if the redo log members are mirror copies.All member files from a same redo group have the same data?Are there any different in mirror or multiplex a file?
View 4 Replies View Relatedselect
a.first_name,
a.agent_id,
a.birth_date
from
agents a
[code]........
from the above i cannot get the youngest one! this is giving me some mid age.
I am working for an agency which needs to synchronize(bi-directional) a master-master database configuration (Oracle <-> DB2) between sites hosted in Washington ,DC and Europe.
We are doing high level estimates right now of in-house development , Oracle Golden Gate and DBMOTO, MQ...etc with bi-directional synchronization with Oracle and DB2 in decentralized geographic locations?
Or production level experience(perf. issues, maintenance ..drawbacks) with any of the products mentioned.
When a user session commit he is waiting on 'log file sync' untill LGWR sends the message back to user session after writing log buffer content into redo log file.As far as i understand this is serialize operation(one at a time).
So how come i have 7 ms average 'log file sync' wait time and i can still perform 200 commits per sec ?
7 ms * 200 waits = 1400ms = 1.4 sec
i want a select statement to retrieve the last name added into the "ename" column .i mean :if i insert "jack" into "ename" column , i want to write a select statement to retrieve that last name while i do not know it is jack or any other name ?
View 2 Replies View RelatedI am not getting added hours from results.
SELECT audittimestamp + interval (SELECT EXTRACT(TIMEZONE_HOUR
FROM systimestamp) FROM DUAL) hour from tab1I want to add Timezone_hour to my timestamp.
Do u want to get the youngest & oldest member at each location?
View 1 Replies View Relatedi have created a new tablespace and assigned it to new user. What are the minimum no. of grants i should give, so that the user can made any kind of changes to all the objects within the tablespace and cant access other tablespace.
View 3 Replies View RelatedIm trying to generate a member procedure that allows the user to manual enter the required information via substitution variables. The manual INSERT INTO statements work but I cant seem to get it to work within a procedure.
Here is the code for the type, table andstandard insert:
CREATE TYPE toy_typ AS OBJECT
(toy_id NUMBER ( 5),
toy_name VARCHAR2 (20),
toy_cost NUMBER ( 4),
[code]...
the procedure complies but i get a warning error. When i also try to execute the code with either set values or substitutions i get either not enough or to many values error.
have a req like below
CREATE TABLE TEST_BRK
( EMP_ID VARCHAR2(20),
BEG_DT DATE,
END_DT DATE,
DEPT_CODE VARCHAR2(10),
[code]...
COMMIT;i need to break down the each member range by record per month and make a record as first day of that month . and dept and branch should have the same value as what the value it was in the range of source.
excepted ouput like below
EMP_ID MONTH_DAY_1 DEP_CODE BRANCH
AAAA 01-JAN-2010 02 A
AAAA 01-FEB-2010 02 A
AAAA 01-MAR-2010 02 A
AAAA 01-APR-2010 02 A
AAAA 01-MAY-2010 02 A
AAAA 01-JUN-2010 05 B
AAAA 01-JUL-2010 05 B
.how can i code the logic to get my expected output above
After compiling a simple valid SP in Toad for Oracle 8.5.1:
CREATE OR REPLACE PROCEDURE proc_test
AS
DECLARE v_name VARCHAR2(20) := 'Ed Edson';
BEGIN
DBMS_OUTPUT.PUT_LINE('Hi, my name is ' || v_name);
END;
The SP is not added to the schema. Also the three status fields (status, created and Last Update in the Procedure Editor remain <Unknown>. It is not a rights or privilege issue, because the creation works perfectly in SQL*Plus!
I'm trying to work out how to synchronize a source and target database in an Oracle CDC implementation. We're in the architecture design stage of a near-real-time Operational Data Store style solution. Both the ODS and our pilot source system will be Oracle 10g. Our plan is to use Oracle Asynch Hotlog Change Data Capture to capture change data in near-real-time so that it can be applied to the ODS.
I understand the CDC apply process once the ODS and Source System are synchronized: DBMS_CDC_SUBSCRIBE.EXTEND_WINDOW to release the next window of change data, select from the publish views, then DBMS_CDC_SUBSCRIBE.PURGE_WINDOW to register the change data is no longer required.
But how do we do the initial synchronization if the source system is live and contains data and the ODS is new (and empty)? The easiest way would be to somehow flag EVERY row as change data. eg. Truncate every table and import. This would not be so good for existing CDC subscribers.
A more logical way would be to:
- Take a hot backup of the live prod database
- Activate CDC (DBMS_CDC_SUBSCRIBE.ACTIVATE_SUBSCRIPTION) on the source system to start tracking changes
- Manually build the ODS from the snapshot
- Start applying changes from CDC
if the source system is live, how can we GUARANTEE that the first 2 steps (snapshot and ACTIVATE_SUBSCRIPTION) are performed at EXACTLY the same time (ie. same SCN)?
I'm am getting an error that says that a role doesn't exist when I can cleary see it in DBA_ROLES. I can successfully grant other roles in this session. I am using Oracle 11.1 on RAC.
GRANT "CONNECT" TO BAKERD
Error at line 1
ORA-01919: role 'CONNECT' does not exist
select * from dba_roles where role = 'CONNECT'
[code]....
The size of redolog member is 12m . Can I increase the size of that member dynamically, without adding a new member to that group and dropping the old one.
View 8 Replies View RelatedI am attempting to perform a TSPITR on a newly created tablespace. The error indicates that the tablespace is not in the recovery catalog in which case it is. The database is Oracle 11g on Win2k8 64bit enterprise edition.
List of Datafiles in backup set 52
File LV Type Ckp SCN Ckp Time Name
---- -- ---- ---------- --------- ----
1 Full 3959509 06-MAR-11 +DATA/orcl/datafile/system.257.742678049
2 Full 3959509 06-MAR-11 +DATA/orcl/datafile/sysaux.258.742678049
[code]...
i create new database (Student) using command line, now i want to connect with newly created database (using sys as sysdba), but again it directly connected with old database (ORCL). So what should i do to connect with newly created database (Student).
View 3 Replies View Relatedos version is solaris 10
db version 11.2.0.3
how to tune log file sysnc waits in 11gr2 what parameters are involving in tuning log file sync and what would be its optimal values.
I need a clarification on the below query:
1) DROP USER MK CASCADE;
2) Created user
3) Created objects like procedure,index... and granted privileges.
4) Now i am performing the import as below.
impdp system/.... SCHEMAS=MK DIRECTORY=EXPBKUP DUMPFILE=ABC_Export.dmp LOGFILE=ABC_imp.log INCLUDE=TABLE TABLE_EXISTS_ACTION=REPLACE
But nothing is imported.
Is this the problem of the parameter "INCLUDE=TABLE TABLE_EXISTS_ACTION=REPLACE"? as the user is new.
i am trying to configure rman for newly created database .when i entered
rman target /
it is throwing following error
[/u01/app/oracle/product]rman target /
Recovery Manager: Release 9.2.0.8.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12162: TNS:service name is incorrectly specified
I have near 114 export.dmp.z* export backup. I am trying to import it on newly created database using imp.
But i am not getting how can i select all export.dmp.z* files using imp. Its easy in impdp, but i have exported backup.
I was setting up disks groups and I accidentally created one group (DATA) with "NORMAL" redundancy but wanted it to be "EXTERNAL". I tried using asmca to remove disks from the group, drop the group, change the redundancy..... All of this failed because there was an spfile on the disk group.
I finally got it to work with using this procedure:
sqlplus '/ as sysasm'
SQL*Plus: Release 11.2.0.3.0 Production on Thu Apr 5 08:58:19 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> drop diskgroup DATA;
drop diskgroup DATA
*
ERROR at line 1:
ORA-15039: diskgroup not dropped
ORA-15053: diskgroup "DATA" contains existing files
[code]....
In summary, I am not sure why changing the redundancy would be so difficult if there is data on the disk group.
When I am importing, I get these errors
IMP-00019: row rejected due to ORACLE error 1
IMP-00003: ORACLE error 1 encountered
ORA-00001: unique constraint (XXXXXXXXXXXXXXXX) violated
Column 1 2
Column 2 OFFLINE
[code]....
I added a datafile in undo tablespace (its an ASM database). I doubt that since I added the datafile to undo tablespace, I am getting this error.
Mistakenly I added lot of datafiles with autextend on option.. I realized later and then tried to resize the datafiles to a minumum space but got the below error
ORA-03214: File Size specified is smaller than minimum required.
How to resolve this problem to reclain the space back?
One of my Customer had followed the document applied pertaining to mitigate against vulnerability CVE-2012-3132.
New Document Mitigation steps for CVE-2012-3132 [ID 1482694.1]
This was applied to a database and it stopped the 'password' command from succeeding in SQLPLUS. Once the trigger was disabled, it worked fine.
ORA-00604: error occurred at recursive SQL level 1
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SYS.NAME_SECURITY", line 165
ORA-06512: at line 2
Why is this behavior seen? By the way, he was able to change the password using TOAD. Only sqlplus is the issue.
We have siebel server on windows machine and db server on unix box. We have done some modification(added columns) in siebel tools level. Now we want to ddl synch through command line prompt. how ot do ddl sync?
View 4 Replies View Related