LSNRCTL for HPUX: Version 11.2.0.1.0 - Production on 11-JAN-2013 12:21:51
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=offdb2)(PORT=1522)))
Services Summary...
Service "MDB" has 2 instance(s).
Instance "MDB", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:15388 refused:0
LOCAL SERVER
[code]....
From doc. I see that the "current" is the number of client connections it is handling, that is, its current load.It is not correlating with the sessions or processes in DB, so what does this means?
Does it show that more than 150 connections try to perform connection simultaneously?
How to find the sid from v$session of my current session.
I want to ask:
Let say I have open 10 TOAD session and only in one toad session i have fired a sql query ( the rest 9 session are just blank), then the rest 9 status are in active status. Now, how i can figure out which sid ( from v$session ) belongs to which session as all the 9 session having nothing to run.
Quote: My main intention is to find out the current session sid as soon as it make connection with DB.
I am having Oracle 11g (Release 11.2.0.2.0) running on Windows Server 2007 SP2. I am trying to connect to this server from my system using SQL Plus command prompt. (Dedicated - redirect (client and server are on different computers)
I am getting an error: TNS-12518: TNS:listener could not hand off client connection.
When I checked the listener log in the server machine, these were the errors: TNS-12518: TNS:listener could not hand off client connection TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error 32-bit Windows Error: 203: Unknown error
I have a DB on my local machine and it was working fine till yesterday.Today suddenly I started receiving error "IO Error : The Network Adapter Could not establish the connection".
1) My first question is that is there some log entry corresponding to this failed connection attempt in listener.log or alert.log ? If yes, how to identify it ?
2) My second question is : What to deduct from listener logs pasted below?I know about "service_update" messages, but what about others (having CONNECT_DATA in them) ? Also, what is "WARNING: Subscription for node down event still pending" in below logs ?
TNS-12518: TNS:listener could not hand off client connection TNS-12571: TNS:packet writer failure TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error Linux Error: 104: Connection reset by peer
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 12 11:07:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR: ORA-12518: TNS:listener could not hand off client connection
Below is alertlog entry
Completed: alter database open Thu Apr 04 17:06:19 2013 db_recovery_file_dest_size of 4096 MB is 0.00% used. This is a user-specified limit on the amount of space that will be used by this
ODBC--call failed.TNS:listener was not given the SID in CONNECT_DATA (#12504)
TNSname sets the SID. SQL*Plus is able to connect from the client Windows XP Proff using the same name. Access, on the same client, uses the same Oracle driver to connect successfully to other Oracle databases. These other databases show equal tnsname (different name and SID...)
ODBC Data Source Administrator configures the database and the test connection is successful.
Cannot set up a link from Access to the Oracle database. At some point, I have created a new Access database and it did let me connect, view the list of tables, and set up links to several tables, but the next day I could not open any of the tables and the complain was: ODBC--connection to 'MYDB' failed.
It seems that SQL*Plus passes correctly the SID from the TNSname but ODBC, when invoked from Access, does not. Yet, ODBC does it right for other databases.
emca -repos create - ran clear emca -config dbcontrol db - failed with following:
SEVERE: Error Loading TransX:Listener refused the connection with the following error: ORA-12523, TNS:listener could not find instance appropriate for the client connection
lsnrctl status ************************************************************************* STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Solaris: Version 11.2.0.3.0 - Production Start Date 13-AUG-2013 15:39:06 Uptime 0 days 0 hr. 26 min. 42 sec Trace Level off Security ON: Local OS Authentication SNMP OFF [code]....
I am using oracle 11g client library on Linux 64bit machine and trying to connect to oracle database using jdbc thin driver.The url format what I am trying to use is:
I am able to connect with the above syntax. But when the service_name is having . e.g service_name = orcl.177.39.45, with the above format I get the above error.
If I change the URL syntax to following, it works
jdbc:oracle:thin:@IP address:port/service_name
But both seems to be valid syntax.So I would like to undestand the reason behind the same. When service_name is having ".", why ":" does not work and "/" works and when the service_name is without " ." , 1st format works. Is there any specific reason behind same?
I need to verify if the current date is grater than the 15th of the current month. If its grater than the 15th of the current month i need to do an action or if else its lesser than 15th of the current month i need to do an other operation.
I'd like to call an existing function/procedure from a resource template. For example, I have a procedure called 'rest' with an out parameter of 'p_out' - how do I use this within a resource template?
At the moment I have defined the template as type 'PL/SQL Block' and with the 'GET' defined as:
begin myschema.rest(:p_out); end;
APEX_PUBLIC_USER has been granted 'all' on the procedure. The p_out is populated with a piece of text.
When I call this resource, I get a '500 Internal Error' returned. I've tried adding p_out as an X-APEX-FORWARD parameter, but nothing seems to work.
I am using oracle 11.2.0 in linux platform.i have created a listener for the asm database. and i am using non default port of 1525 whenever i go for lsnrctl>status always shows for the port 1521. i don't want the default port 1521 and i have changed the local listener as listener1 with port 1525 protool tcp in spfile and registered with the asm database.Is there any option to change the default listener as listener1.
also,everytime when i give lsnrctl>show current_listener it is showing "listener"
i have set the current-listener to listener1 and save_config listener1 and reloaded.After exit and enter lsnrctl>status it will show for port 1521 When i attempt to start listener1 every time. it will prompt listener1 is already running.
In one of our RAC envrionment, we have more than 15 databases in a server running in AIX Operating system.the Listener file I am able to find only one entry (SID). But while trying to execute lsnrctl status it displays all the 15 SIDs in the list hosted in the ser ver. Not sure how it works?
As we created another one new database in the database, where i need to add this SID in the listener.ora file to reload the listener.
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
I have an employee table that has a paygrp_id that will be used for my subset of employees. For all the employees that have the paygrp_id = 10212 on the employee table I need to update the workbrain_user table to set the flag wbu_cansee_self to 'N'. The join between the employee table and the workbrain_user table is the emp_id.I get the following error when I run this cursor.
[error] Error on line 0 DECLARE CURSOR wbuFlag_cur IS SELECT e.emp_fullname, e.paygrp_id,wbu.WBU_CANS [code]...
create or replace procedure sp_test is vs_proc_name varchar2(40); begin --get the name of current procedure ,here is "sp_test" --[color=red]but ,i do not want the hard code here[/color] insert into test_Page(proc) values(vs_proc_name); --- -- commit; end;
SELECT TO_DATE('21-NOV-2010') DAY, 0 RATE FROM DUAL UNION SELECT TO_DATE('22-NOV-2010') DAY, 10.5 RATE FROM DUAL UNION SELECT TO_DATE('23-NOV-2010') DAY, 0 RATE FROM DUAL UNION SELECT TO_DATE('24-NOV-2010') DAY, 0 RATE FROM DUAL UNION
I have a table I need to update called employee_history. It has almost the exact same values as another table called Employee. The difference being that the employee_history has a start date and end date. So it allows you to have overrides in the future. The employee table is static. So it only allows you to see the current data as of today.
I need to write an insert statement that will pull values from employee table and populate the employee_history table but I also have columns in the employee_history table that requires a next value and a start and end date.
From the employee table I want to select e.emp_id, e.emp_firstname, e.emp_lastname, e.shftpat_id, e.client_id from employee e
I want to INSERT INTO EMPLOYEE_HISTORY (EMHIST_ID, EMPHIST_START_DATE, EMPHIST_END_DATE, EMP_ID, EMP_FIRSTNAME, EMP_LASTNAME, SHFTPAT_ID, CLIENT_ID)
with the VALUES being (SEQ_EMPHIST_ID.nextval, TRUNC(sysdate), 01/01/3000 and the employee data from the employee table)). I bought the book Easy Oracle PL/SQL Programming but I am not finding what I need. It gives an example of a CURSOR FOR UPDATE and a reference to an UPDATE WHERE CURRENT OF.
The examples are straight forward where you take two columns from table one and update a new table with those values, or where you select a subset of employees that need a commission and update the emp table with that commission.
I have a driver table from which I need to update another table while, at the same time, record the fact that I have processed each record on the driver table.
The driver table will contain around 3.5 million records, therefore I intended to handle this using some bulk collections, with a LIMIT option so that I don't hit any memory problems.
I would also prefer to commit in batches, or at least handle exceptions using the SAVE EXCEPTION clause. The problem is I seem to be running into an error when trying to make the update to the driver table (the commented out code). With this in, I get the error:
ORA-01410: invalid ROWID ORA-06512: at "CUST_MAIL_UPDATE", line 217 ORA-06512: at line 38
Can the CURRENT OF not work with the FORALL? What is my best approach here? If I use a FOR LOOP I lose my SAVE EXCEPTIONS exception handling.
The Procedure is as follows:
-- declare some object structures to hold the retrieved data TYPE driver_rec IS RECORD ( account_no ext_driver.account_no%TYPE, update_action ext_driver.update_action%TYPE, customers_rowid ext_driver.customers_rowid%TYPE); TYPE driver_recs_tt IS TABLE OF driver_rec; -- cursor to get the records from the driver table [code].......
how can I get the form hostname that it is currently running to? I already tried the form's (forms developer 6i) built in host functionality but it doesn't return the hostname.
Our current approach is to have a shell script that will get and insert the hostname into the table and the form will just query from the table to get the hostname, but that approach has involved too many modules.
I have a table and want to calculate the stdev of a parameter over a rolling window (past 250 records, sorted by ID): ... stddev(parameter) over (order by ID range between 250 preceding and current row) as SD ...
I don't get any error, but if I calculate the same in excel (=STDEV(250 row range)), it seems that this code does not the same. Is there something wrong with the 250 row rolling window?
I would like to hide/show tabs according to users' page privileges list. So I need get current tab ID or tab Name in runtime environment to know if show/hide it for current user.
I have an excel spreadsheet that queries an oracle data for some information. I am trying to get the information shown to only be from the current month. I have tried my google-fu, but all of the formulas I have found will not work and return a various error of some sort. The rest of the query works great, but I cant figure this one out. Select*From&& and I guess i need a where statement, but nothing seems to work.Where"My_Table_Name","OrderDate".
We have employee salary table which will have salary of an employee on daily basis (only working days). Below is the table structure:
CODEemp_salary ---------- emp_id NUMBER(15) NOT NULL effective_date DATE NOT NULL salary NUMBER(15) NOT NULL
Primary key - emp_id, effective_date..This table is yearly partitioned...I have to find out how long the salary is not changed for an employee from given date, and last salary. I am using below query to do this:
CODEWITH salary_tab AS (SELECT effective_date, salary, (CASE WHEN (LAG (salary) OVER (PARTITION BY emp_id ORDER BY effective_date ASC) = salary
[code]....
For emp_id 1, if we ran this query for 10/31/2011, then it has to compare the 10/31 salary with 10/29 and do the same until the salary mismatches. In this case, salary salary mismatch occurs on 10/20, so the stale salary period is from 10/31 to 10/21 which is 7 days.Below query will give that result:
CODE WITH salary_tab AS (SELECT effective_date, salary, (CASE WHEN (LAG (salary) OVER (PARTITION BY emp_id ORDER BY effective_date ASC) = salary
table_1 contain records on employee and the supervisor they are under at a certain date.
As some employee(00001 & 00003) have a different supervisor from different date, I'll like to extract from table_1 the record of each employee in the table that only contain the supervisor info on the most recent date.And from table_2, i'll like to extract the employee's name. These records extracted from both the tables would the be put into a new table,table_3
Example: For employee 00001, only extract record that have the most recent date which is 04-APRIL-2004 and not on 01-MARCH-2004
I am looking to build a query to update a current value in a DBA view to a new one.i.e. updating directories based on the current value:
CREATE OR REPLACE DIRECTORY 'DIRECTORY_NAME' AS 'DIRECTORY_PATH'(substr(directory_path, 1,5) + '/&dbname' {i.e. this is different for every database name }+ 'DIRECTORY_PATH'(string after /xyz/) WHERE DIRECTORY_NAME in ( select DIRECTORY_NAME from DBA_DIRECTORIES WHERE DIRECTORY_PATH like '/xyz/%' )
i.e. resulting output should be:
CREATE OR REPLACE DIRECTORY 'ABC' AS '/xyz/DBNAME/abc/def/';
(when the directory previously was 'xyz/abc/def/') i.e. basically inserting the db name into the directory.where DBNAME is a variable more directories are added frequently so therefore this needs to be a dynamic procedure to change the directories in the db.
I have problem about displaying current records with same table(tbl_pawnitem). I have 2 transactions which are the pawned transaction and for sale transaction. and both transactions save into tbl_pawnitem table..i want to display only in my list the for sale transaction without deleting the records of pawned transaction. what condition i will use?
