We have a table for reports. If user A submits a report ...and say the sequence # is 242. When this report goes to Admin ...he submits this request then in same table we add another row with say sequence # 245. THEN we update column called 'Asctd ID' for 242 and add 245 in there. and then update Asctd ID for 245 and add 242 in there.
(This table has many fields, one of which is report Name field)
Now i am running a query like this...
SELECT b.JOB_ID, a.DESC, TO_CHAR(a.CREATE_DATE,'MM/DD/YYYY'),
DECODE(a.DLVRY_TYPE,'','PDF',a.DLVRY_TYPE), DECODE(a.FLG,'','N/A',
a.FLG), ((TO_DATE(a.CREATE_DATE,'DD-MON-YY')) + 21) -
TO_DATE(SYSDATE, 'DD-MON-YY'), c.STATUS_DESC, a.SIZE_NUM,
b.PRVDR_ID, a.asctd_id, d.NM
FROM REQUEST_DIM a, PROVIDER_DIM b, STATUS_DIM c, DIM d
WHERE a.FLAG = 'P' and RTRIM(a.RPT_RQST_USER_ID) = 'TEST02' AND a.RPT_RQST_TYPE = 'D'
AND a.RPT_RQST_ACTIVE_IND = 'A' and a.asctd_id is not null and a.RPT_RQST_ID = b.RPT_RQST_ID
and b.JOB_ID = c.JOB_ID and b.PRVDR_ID = d.PRVDR_ID
AND c.CREATE_DT = (SELECT MAX(d.CREATE_DT)
FROM STATUS_DIM d
WHERE d.RPT_RQST_ID = b.RPT_RQST_ID and d.JOB_ID = b.JOB_ID )
ORDER BY a.RPT_RQST_ID, a.CREATE_DATE
Now this query is run by the admin (job 245) ...it returns a bunch of stuff and also the name of the report that the admin gave this. But when admin sees this we want to be able to displace the report name that user A gave it (asctd ID 242). so the row 245 HAS a asctd ID 242. and there is a row 242 from which we can get the name easily. But i dont know if this is possible in ONE QUERY??
SELECT c1.c_no, c1.c_name, c1.city FROM customers c1 LEFT OUTER JOIN customers c2 ON (c1.city = c2.city AND c1.c_name<>c2.c_name); SELECT c1.c_no, c1.c_name, c1.city FROM customers c1 RIGHT OUTER JOIN customers c2 ON (c1.city = c2.city AND c1.c_name<>c2.c_name);
Basically, i was asked to join Table 1 and Table 2 together in oracle. I have been given the values of Table 1. For example, Depot_ID has value of DEP01, DEP02, DEP02 etc. Therefore, I have to create table 2 with those attributes given below. But the attribute name of the Table 2 is Depot_No which is different.
My question: Is it correct to give the same values of Depot_ID in Table 1 to Depot_No in Table 2, such as, DEP01, DEP02, DEP02?
I create a second "DATE_PAIRS" table, and join a few subqueries. It works with conditions (ID=1), but scanning the whole table (2+ million records) is abysmal.
I have two tables. The first contains all Segment information within Oracle i.e;
Table 1 Segment Description Flex_Value 1 North 1234 1 South 1235 1 East 1236 2 Car C001 2 Boat B001
and the second table contains financial data, but only the segment code;
Table 2 Date Segment1 Segment2 Value 01/01/11 1234 C001 10,000 02/01/11 1235 C001 10,000
what I want to return is some of the columns within table two as well as additional columns for the segment descriptions.
Below is an extract of what I have put together, and it does return what I need, but I'm sure there is a much more efficient way of creating the query;
based on a provided list of key values, joining the collected list against a source table to retrieve additional information related to the key. In this simple example, the procedure accepts a list of employee numbers. The goal is to print a list of names associated with those numbers.
The method is to materialize the list of employee numbers as rows and join those rows to a source table to get the names. I have used BULK COLLECT. Why we cannot cast PLSQL tables using a type defined in the procedure's specification (why the type needs to exist as an object before we can cast it, like this:
SELECT * FROM TABLE ( CAST ( SOME_FUNCTION(&some parameter) AS SOME_TYPE ) );
here is my demo SQL, which you should be able to execute against the SCOTT schema without any change
declare type employee_numbers is table of emp.empno%type index by binary_integer; type employee_names is table of emp.ename%type index by binary_integer; type employees_record is record (empno employee_numbers, person_name employee_names); records employees_record;
I have the following four tables with the following structures Table A
ColA1 ColA2 ColA3 ColA4 ColA5 AA 100 CC DD EE
Table B
ColB1 ColB2 ColB3 ColB4 ColB5 AA 100 40452 A9 CDE
when these two tables were joined like the following:
Select colA1,ColA2, ColA3, ColA4, ColB3,ColB4, ColB5 from table A Left outer join (select ColB3, ColB4, ColB5 from table B where colB3 = (select max(colB3) from table B ) on (colA1 = colB1 and ColA2 = col B2)
can we link a table that contains a foreign key with a sequence table? i have a table that has a sequence bookid and i want to link this table to another table that contains a foreign key of bookid.can i link this two table and how?
I have a table (promo_custom) with following colimns (id, id_promo, button_promo, button_submit, css, user, date) and other table (promo_buttons) with following columns (id, id_design, name, url, username, date) .
Columns promo_custom.button_promo and promo_custom.button_submit are foreign keys (references promo_buttons.id).
I want to create a view showing table promo_custom but instead of columns button_promo and button_submit I would like to show the column url of them.
We have a table in the client database that has two columns - column parent and column child. The whole hierarchy of DB table dependencies is held in this table.If Report 1 is dependent on Table A and Table A in turn is dependent on two tables Table M and Table N. Table N is dependent on table Z it will appear in the db table as,
Hierarchy Table Parent Child Report1Table A Table ATable M Table ATable N Table NTable Z
Requirement :
From the above structure, we need to build a table which will hold the complete hierarchy by breaking it into multiple columns.The o/p should look like this
-ParentChild 1Child 2 Child 3 -Report1Table ATable M -Report1Table ATable N Table Z
Child 1, Child 2, Child 3 ....and so on are columns.The number of tables and the no of hierarchical relationships are dynamic.
SQL Statements to create hierarchy table:
create table hierarchy (parent varchar2(20), child varchar2(20)); insert into hierarchy values ('Report1','Table A'); insert into hierarchy values ('Report1','Table B'); insert into hierarchy values ('Table A','Table M'); insert into hierarchy values ('Table B','Table N'); insert into hierarchy values ('Report2','Table P'); insert into hierarchy values ('Table M','Table X'); insert into hierarchy values ('Table N','Table Y'); insert into hierarchy values ('Report X','Table Z');
Approached already tried :
1) Using indentation : select lpad(' ',20*(level-1)) || to_char(child) P from hierarchy connect_by start with parent='Report1' connect by prior child=parent;
2)Using connect by path function : select * from (select parent,child,level,connect_by_isleaf as leaf, sys_connect_by_path(child,'/') as path from hierarchy start with parent='Report1' connect by prior child =parent) a where Leaf not in (0);
Both the approaches give the information but the hierarchy data appears in a single column.Ideally we would like data at each level to appear in a different column.
I want to do an import of a table from my old dump file.The same table is already there in the development box but few more columns are added to that table while testing so in the dump those columns are not available.
TABLE_EXISTS_ACTION=TRUNCATE The new table SQL> desc "TESTINVENTORY"."TTRANSACTION" Name Null? Type ----------------------------------------------------------------------------------- -------- -------------------------------------------------------- TRANSACTIONIDNOT NULL CHAR(26) BRANCHCODE NOT NULL CHAR(3) EXTERNALSYSTEM NOT NULL CHAR(3) EXTRACTSYSTEM NOT NULL CHAR(3) OWNERBRANCHCODE NOT NULL CHAR(3) TRADEREFERENCE NOT NULL CHAR(20) [code]...
I have a table that has 2 columns of type nested table. Now in the purge process, when I try to truncate or drop a partition from this table, I get error that I can't do this (because table has nested tables). how I will be able to truncate/drop partition from this table? IF I change column types from nested table to varray type, will it work?
Also, is there any short method of moving existing data from a nested table column to a varray column (having same fields as nested table)?
I tried to split the query into 2 parts , the outcome is fine but when ever i merge them ( include other table fields ) . The result is 3X3 rows .. it should be just 3 rows
The First Query ( Is running fine , 3 Rows returned )
The Second Query ( Is running fine also, 3 Rows returned )
SELECT WORKORDER.WONUM, WORKORDER.ESTSERVCOST, WP.DESCRIPTION, WP.LINECOST FROM WORKORDER , WPSERVICE WP WHERE PARENT IS NULL AND WORKORDER.WONUM = WP.WONUM AND WORKORDER.WONUM = :WO
The problem occurs when i try to merge both these queries , as the result shows 9 rows ..
if a table contains two columns and both are part of the primary key of that table (Kind of obvoius).
should i opt for a index organized tbale in this case ?Or should i opt for another running sequential colum which would serve as a primary key of this table and define the actual two columns of the system as unique keys.
there is a drawback if a most of the tables of a database contain composite primary keys?
I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:
Query 1
Update TableA A set (A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3 from TableB where A.CODE=B.CODE)
Query 2 Update TableA A set (A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3 from TableB where A.CODE=B.CODE) where exists A.code = (select B.code from TableB B where A.code=B.code)
When i execute these two above queries, it keeps executing indefinitely.
We have two tables tab1 and tab2 same structures and empid and id are keys.
We need to query for records that doesnt exist in tab2 and exist in tab1 based on keys above and then insert into t2.And also we have a date column in tab1...
if we have two records..that match empid and id and if dates are different we have to take one record with the least date like min(Date) and insert that one record in to tab2.
I have a table called test_renames that has two columns(new_name and old_name) and one row with the following values
NEW_NAME OLD_NAME DRUG10 DRUG1
I have another table called SH0 that has 10,000 rows and the column of interest is called ITEM1. ITEM 1 contains the following distinct drug names:
DRUG1,DRUG2,DRUG3,DRUG4,DRUG5
Each DRUG has multiple rows associated with it.
I need to only update rows for DRUG1 and set the name from DRUG1 to DRUG10 for all rows where ITEM1 is DRUG1.
However I need to write this update statement by joining with the values in the test_renames table that contains the NEW_NAME and the OLD_NAME.
DRUG1 has 2,000 rows associated with it. The following SQL statement gives me 2,000 rows
(SELECT NVL(CHG.NEW_NAME, SH.ITEM1) FROM test_renames CHG,sh0 sh WHERE UPPER(SH.ITEM1) = UPPER(CHG.OLD_NAME) AND UPPER(SH.ITEM1) IN (SELECT UPPER(OLD_NAME) from test_renames))
However when I run the following update statement, it appears that the SQL query updates all the 10,000 rows in the table instead of just touching the 2,000 rows for DRUG1. It does change all the rows for DRUG1 to DRUG10, but all the other ITEM1 values become null. What I need from the update statement is only chnage the rows for DRUG1 to DRUG10 and leave the other rows that I associated with DRUG2, DRUG3 etc. Here is my update statement.
UPDATE SH0 SH SET ITEM1 = (SELECT NVL(CHG.NEW_NAME, SH.ITEM1) FROM test_renames CHG WHERE UPPER(SH.ITEM1) = UPPER(CHG.OLD_NAME) AND UPPER(SH.ITEM1) IN (SELECT UPPER(OLD_NAME) from test_renames))
This update statement touches all 10,000 rows. I am looking to update only the relevant 2,000 rows for DRUG1.
CREATE TABLE A(EMP_ID NUMBER, EMP_NAME VARCHAR2(100)) CREATE TABLE B(EMP_ID NUMBER, EMP_ATT1 VARCHAR2(10), EMP_ATT2 VARCHAR2(10)) INSERT INTO A VALUES(1, 'ONE'); INSERT INTO A VALUES(2, 'TWO'); INSERT INTO A VALUES(3, 'THREE');
[Code]....
This query returns all the matching row of A and B
SELECT A.EMP_ID, A.EMP_NAME, B.EMP_ATT1, B.EMP_ATT2 FROM A INNER JOIN B ON A.EMP_ID=B.EMP_ID
The output for this shows:
EMP_ID EMP_NAME EMP_ATT1 EMP_ATT2 1 ONE 1ATT1 1ATT2 2 TWO 2ATT1 2ATT2 2 TWO 2ATT1.1 2ATT2.1 3 THREE 3ATT1 3ATT2
The requirement is to avoid duplicate rows even if matched:
EMP_ID EMP_NAME EMP_ATT1 EMP_ATT2 1 ONE 1ATT1 1ATT2 2 TWO 2ATT1 2ATT2 3 THREE 3ATT1 3ATT2
joining this query instead of using the left join. Reason is want to show the score column in a different place and also do not want to show the second IPS column that is used in the joined query.
WITH table1 AS ( SELECT 345 id, To_Date('1/31/2010', 'mm/dd/yyyy') dt, 123 cid, 'test' txt FROM dual UNION ALL SELECT 345 id, To_Date('2/1/2010', 'mm/dd/yyyy') dt, 121 cid, 'test2' txt FROM dual UNION ALL SELECT 345 id, To_Date('2/2/2010', 'mm/dd/yyyy') dt, 112 cid, 'test3' txt FROM dual UNION ALL SELECT 345 id, To_Date('2/3/2010', 'mm/dd/yyyy') dt, 162 cid, 'test4' txt FROM dual UNION ALL
as you can see, i want to join both tables (table1 and ov_dates) and take dt from ov_dates table look it up in table1 and thengrap ov_dt and looking up in table1 and copy values of one row to the other.
for example, in ov_dates i have 3/31 dt and 4/7 ov dt. i will look for 3/31 and 4/7 row in table 1 and copy columns values from 4/7 to 3/31you can see that cid for 3/31 stay the same (since i dont want to replace the value) but txt value was replace with value from 4/7
another examplein ov_dates we have 1/31 dt and 2/5. so i go into table1 get 1/31 and 2/5 row and copy values from 2/5 into 1/31/ as you can see the txt column value for 1/31 becametest6 since it was taking from 2/5. the same thing for the rest ofdata
i am trying to left join a selection of two or more tables. what i have found, and solved part of my problem, is that oracle left joins only the last table in the select statement ...
i.e : select * from A, B left join C on C.id = A.id wouldn't work because left join applies to B and not A.
but as my queries grow i need to make something as follows :
select * from A, B left join C on (C.ID_A = A.ID and C.ID_B = B.ID) [... evantually more left joins as the preceding one may go here]
this query works for DB2 but Oracle claims that "A"."ID" is an invalid identifier, while the B.ID is recognized since it's the last table stated before the "LEFT JOIN" keyword.
I am new to writing queries for an oracle database and I was giving a bit of challenge. Here's the situation. I have 3 tables I am using. 2 of the tables are being used to transpose people's names from rows to columns by account number (there are multiple people associated with each account). The last table is a pretty straight forward query. I can run each query by itself and I get the results I want. But when I try to compile the two together, I start getting a variety of errors. Below is the two queries:
Query 1 (returns about 1,500 rows): SELECT DISTINCT CAST (EIS_DW.ACCTCOMMONLOAN.ACCOUNT as VARCHAR(20)) as ACCOUNT_NUM, EIS_DW.ACCTCOMMONLOAN.ACCOUNT_STATUS, EIS_DW.ACCTCOMMONLOAN.MINOR_DESCRIPTION, EIS_DW.ACCTCOMMONLOAN.OWNER_NAME, [code]......
Ideally, I want to join these two queries on ACCOUNT and ACCTNBR. I have tried working my first query into my second query, but the best I get with that, is the 570 or so accounts, not all the accounts.
I'm stuck on the CREATE VIEW part and the SELECT statement to get the output of the CREATE VIEW. We were instructed not to use AND and simply use JOIN on this exercise.
Question - For employee John Smith, give the project(s) he is working on, his department's name and the name of his division. See crows foot diagram on a separate file.
Perhaps this is a common request : I have 2 tables:
Table A ------- ID Value 1 a 2 b 3 c
Table B ------- ID AnotherValue 1 x 2 y
I am hoping to append a column from Table B to Table A based on a simple sql join (e.g:
Table A
ID Value AnotherValue 1 a x 2 b y 3 c (null)
)
I would rather stay away from the standard update statement since it takes far to long and I'd prefer not to use create table as I don't want to duplicate any data...is this possible to do ? (e.g: just insert the columns into this table ?) - or if it's possible the performance overhead just wouldn't make it worth it ?
I have an application which deploys the data to Oracle database. It has more than 25 tables and many columns. It does not have any document explaining the deployment, so I am kind of doing reverse engineering here.
I need a script which will fetch the column name or at least table names which will match with either some string or number? I found few examples on net to find out number. But I am struggling to make it work for string.
I can not work on stored proc, as I do not have access to create that on server. So, any script will work.
