Shouldn't they produce the same output?
SELECT c1.c_no, c1.c_name, c1.city
FROM customers c1 LEFT OUTER JOIN customers c2 ON (c1.city = c2.city AND c1.c_name<>c2.c_name); SELECT c1.c_no, c1.c_name, c1.city
FROM customers c1 RIGHT OUTER JOIN customers c2 ON (c1.city = c2.city AND c1.c_name<>c2.c_name);
joining the Order table with the Asset table or the Order table with CX_ACTION table to Can i get reference on this .
select x.x_msisdn,
x.x_product_name,
x.x_action,
x.x_status_outcome,
a.recovered_dt,
x.x_amount,
[code].....
We have a table for reports. If user A submits a report ...and say the sequence # is 242. When this report goes to Admin ...he submits this request then in same table we add another row with say sequence # 245. THEN we update column called 'Asctd ID' for 242 and add 245 in there. and then update Asctd ID for 245 and add 242 in there.
(This table has many fields, one of which is report Name field)
Now i am running a query like this...
SELECT b.JOB_ID, a.DESC, TO_CHAR(a.CREATE_DATE,'MM/DD/YYYY'),
DECODE(a.DLVRY_TYPE,'','PDF',a.DLVRY_TYPE), DECODE(a.FLG,'','N/A',
a.FLG), ((TO_DATE(a.CREATE_DATE,'DD-MON-YY')) + 21) -
TO_DATE(SYSDATE, 'DD-MON-YY'), c.STATUS_DESC, a.SIZE_NUM,
b.PRVDR_ID, a.asctd_id, d.NM
FROM REQUEST_DIM a, PROVIDER_DIM b, STATUS_DIM c, DIM d
WHERE a.FLAG = 'P' and RTRIM(a.RPT_RQST_USER_ID) = 'TEST02' AND a.RPT_RQST_TYPE = 'D'
AND a.RPT_RQST_ACTIVE_IND = 'A' and a.asctd_id is not null and a.RPT_RQST_ID = b.RPT_RQST_ID
and b.JOB_ID = c.JOB_ID and b.PRVDR_ID = d.PRVDR_ID
AND c.CREATE_DT = (SELECT MAX(d.CREATE_DT)
FROM STATUS_DIM d
WHERE d.RPT_RQST_ID = b.RPT_RQST_ID and d.JOB_ID = b.JOB_ID )
ORDER BY a.RPT_RQST_ID, a.CREATE_DATE
Now this query is run by the admin (job 245) ...it returns a bunch of stuff and also the name of the report that the admin gave this. But when admin sees this we want to be able to displace the report name that user A gave it (asctd ID 242). so the row 245 HAS a asctd ID 242. and there is a row 242 from which we can get the name easily. But i dont know if this is possible in ONE QUERY??
Basically, i was asked to join Table 1 and Table 2 together in oracle. I have been given the values of Table 1. For example, Depot_ID has value of DEP01, DEP02, DEP02 etc. Therefore, I have to create table 2 with those attributes given below. But the attribute name of the Table 2 is Depot_No which is different.
My question: Is it correct to give the same values of Depot_ID in Table 1 to Depot_No in Table 2, such as, DEP01, DEP02, DEP02?
How to join those two tables below:
Table 1:
Depot_ID
Address
Location
Table 2:
Product_ID
Depot_No
Quantity
Aisle
Bay
I create a second "DATE_PAIRS" table, and join a few subqueries. It works with conditions (ID=1), but scanning the whole table (2+ million records) is abysmal.
Table:
ID Date Price
---------------------
1 2010/1/1 100
1 2010/1/2 125
1 2010/1/5 115
2 2010/1/1 115
2 2010/1/2 105
2 2010/1/5 125
I'd like to return
ID Date1 Date2 Price1 Price2
--------------------------------
1 2010/1/1 2010/1/2 100 125
1 2010/1/2 2010/1/5 125 115
etc ..
I have two tables. The first contains all Segment information within Oracle i.e;
Table 1
Segment Description Flex_Value
1 North 1234
1 South 1235
1 East 1236
2 Car C001
2 Boat B001
and the second table contains financial data, but only the segment code;
Table 2
Date Segment1 Segment2 Value
01/01/11 1234 C001 10,000
02/01/11 1235 C001 10,000
what I want to return is some of the columns within table two as well as additional columns for the segment descriptions.
Below is an extract of what I have put together, and it does return what I need, but I'm sure there is a much more efficient way of creating the query;
SELECT
b.DATE,
b.SEGMENT1,
b.SEGMENT2,
b.SEGMENT3,
b.SEGMENT4,
b.SEGMENT5,
[code].....
based on a provided list of key values, joining the collected list against a source table to retrieve additional information related to the key. In this simple example, the procedure accepts a list of employee numbers. The goal is to print a list of names associated with those numbers.
The method is to materialize the list of employee numbers as rows and join those rows to a source table to get the names. I have used BULK COLLECT. Why we cannot cast PLSQL tables using a type defined in the procedure's specification (why the type needs to exist as an object before we can cast it, like this:
SELECT * FROM TABLE ( CAST ( SOME_FUNCTION(&some parameter) AS SOME_TYPE ) );
here is my demo SQL, which you should be able to execute against the SCOTT schema without any change
declare
type employee_numbers is table of emp.empno%type index by binary_integer;
type employee_names is table of emp.ename%type index by binary_integer;
type employees_record is record (empno employee_numbers, person_name employee_names);
records employees_record;
[code]...
I have the following four tables with the following structures Table A
ColA1 ColA2 ColA3 ColA4 ColA5 AA 100 CC DD EE
Table B
ColB1 ColB2 ColB3 ColB4 ColB5 AA 100 40452 A9 CDE
when these two tables were joined like the following:
Select colA1,ColA2, ColA3, ColA4, ColB3,ColB4, ColB5 from table A Left outer join (select ColB3, ColB4, ColB5 from table B where colB3 = (select max(colB3) from table B ) on (colA1 = colB1 and ColA2 = col B2)
Now i have to join the next table C with table B
Table C structure is
ColD1 ColD2 ColD3 Desc1 A9 Executive Desc1 A7 Engineer
I have the common column such as ColD2 and colB4 to get the Col D3
how do i join the existing query + join between table b and table c?
can we link a table that contains a foreign key with a sequence table? i have a table that has a sequence bookid and i want to link this table to another table that contains a foreign key of bookid.can i link this two table and how?
View 1 Replies View RelatedI have a table (promo_custom) with following colimns (id, id_promo, button_promo, button_submit, css, user, date) and other table (promo_buttons) with following columns (id, id_design, name, url, username, date) .
Columns promo_custom.button_promo and promo_custom.button_submit are foreign keys (references promo_buttons.id).
I want to create a view showing table promo_custom but instead of columns button_promo and button_submit I would like to show the column url of them.
I have two tables
Tab1 columns c1,c2,c3 data as
t1r1c1,t1r1c2,t1r1c3
t1r2c1,t1r2c2,t1r2c3
t1r3c1,t1r3c2,t1r3c3
Tab2 columns c1,c2,c4 data as
t1r1c1,t1r1c2,t2r1c3
i want to get results like below
t1r1c1,t1r1c2,t1r1c3_t1r2c3_t1r3c3
join columns will be c1 and c2 columns.
I tried to split the query into 2 parts , the outcome is fine but when ever i merge them ( include other table fields ) . The result is 3X3 rows .. it should be just 3 rows
The First Query ( Is running fine , 3 Rows returned )
SELECT
WORKORDER.WONUM,
WORKORDER.ESTSERVCOST,
WPM.ITEMNUM,
WPM.ITEMQTY,
[code]......
The Second Query ( Is running fine also, 3 Rows returned )
SELECT
WORKORDER.WONUM,
WORKORDER.ESTSERVCOST,
WP.DESCRIPTION,
WP.LINECOST
FROM WORKORDER , WPSERVICE WP
WHERE PARENT IS NULL
AND WORKORDER.WONUM = WP.WONUM
AND WORKORDER.WONUM = :WO
The problem occurs when i try to merge both these queries , as the result shows 9 rows ..
SELECT
WORKORDER.WONUM,
WORKORDER.ESTSERVCOST,
WPM.ITEMNUM,
WPM.ITEMQTY,
[code]......
We have two tables tab1 and tab2 same structures and empid and id are keys.
We need to query for records that doesnt exist in tab2 and exist in tab1 based on keys above and then insert into t2.And also we have a date column in tab1...
if we have two records..that match empid and id and if dates are different we have to take one record with the least date like min(Date) and insert that one record in to tab2.
I have a table called test_renames that has two columns(new_name and old_name) and one row with the following values
NEW_NAME OLD_NAME
DRUG10 DRUG1
I have another table called SH0 that has 10,000 rows and the column of interest is called ITEM1. ITEM 1 contains the following distinct drug names:
DRUG1,DRUG2,DRUG3,DRUG4,DRUG5
Each DRUG has multiple rows associated with it.
I need to only update rows for DRUG1 and set the name from DRUG1 to DRUG10 for all rows where ITEM1 is DRUG1.
However I need to write this update statement by joining with the values in the test_renames table that contains the NEW_NAME and the OLD_NAME.
DRUG1 has 2,000 rows associated with it. The following SQL statement gives me 2,000 rows
(SELECT NVL(CHG.NEW_NAME, SH.ITEM1)
FROM test_renames CHG,sh0 sh
WHERE UPPER(SH.ITEM1) = UPPER(CHG.OLD_NAME)
AND UPPER(SH.ITEM1) IN (SELECT UPPER(OLD_NAME) from test_renames))
However when I run the following update statement, it appears that the SQL query updates all the 10,000 rows in the table instead of just touching the 2,000 rows for DRUG1. It does change all the rows for DRUG1 to DRUG10, but all the other ITEM1 values become null. What I need from the update statement is only chnage the rows for DRUG1 to DRUG10 and leave the other rows that I associated with DRUG2, DRUG3 etc. Here is my update statement.
UPDATE SH0 SH
SET ITEM1 = (SELECT NVL(CHG.NEW_NAME, SH.ITEM1)
FROM test_renames CHG
WHERE UPPER(SH.ITEM1) = UPPER(CHG.OLD_NAME)
AND UPPER(SH.ITEM1) IN (SELECT UPPER(OLD_NAME) from test_renames))
This update statement touches all 10,000 rows. I am looking to update only the relevant 2,000 rows for DRUG1.
I have two tables A and B
CREATE TABLE A(EMP_ID NUMBER, EMP_NAME VARCHAR2(100))
CREATE TABLE B(EMP_ID NUMBER, EMP_ATT1 VARCHAR2(10), EMP_ATT2 VARCHAR2(10))
INSERT INTO A VALUES(1, 'ONE');
INSERT INTO A VALUES(2, 'TWO');
INSERT INTO A VALUES(3, 'THREE');
[Code]....
This query returns all the matching row of A and B
SELECT A.EMP_ID, A.EMP_NAME, B.EMP_ATT1, B.EMP_ATT2
FROM A
INNER JOIN B ON A.EMP_ID=B.EMP_ID
The output for this shows:
EMP_ID EMP_NAME EMP_ATT1 EMP_ATT2
1 ONE 1ATT1 1ATT2
2 TWO 2ATT1 2ATT2
2 TWO 2ATT1.1 2ATT2.1
3 THREE 3ATT1 3ATT2
The requirement is to avoid duplicate rows even if matched:
EMP_ID EMP_NAME EMP_ATT1 EMP_ATT2
1 ONE 1ATT1 1ATT2
2 TWO 2ATT1 2ATT2
3 THREE 3ATT1 3ATT2
joining this query instead of using the left join. Reason is want to show the score column in a different place and also do not want to show the second IPS column that is used in the joined query.
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
select * from
(
select i.ips,
p.project_name,
p.project_segment,p.location,p.project_exec_model,
p.project_exec_model||' - '||p.project_config pmodel,
one.score schedule,two.score cost,three.score execution,four.score commercial,
nvl(one.score,0)+nvl(two.score,0)+nvl(three.score,0)+nvl(four.score,0) as total,
[code]....
consider the following
WITH table1 AS
(
SELECT 345 id, To_Date('1/31/2010', 'mm/dd/yyyy') dt, 123 cid, 'test' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/1/2010', 'mm/dd/yyyy') dt, 121 cid, 'test2' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/2/2010', 'mm/dd/yyyy') dt, 112 cid, 'test3' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/3/2010', 'mm/dd/yyyy') dt, 162 cid, 'test4' txt FROM dual UNION ALL
[code]..
i want to output the following:
{code}
IDDT CIDTXT
3451/31/2010123test6
3452/1/2010121test2
3452/2/2010112test3
[code]....
as you can see, i want to join both tables (table1 and ov_dates) and take dt from ov_dates table look it up in table1 and thengrap ov_dt and looking up in table1 and copy values of one row to the other.
for example, in ov_dates i have 3/31 dt and 4/7 ov dt. i will look for 3/31 and 4/7 row in table 1 and copy columns values from 4/7 to 3/31you can see that cid for 3/31 stay the same (since i dont want to replace the value) but txt value was replace with value from 4/7
another examplein ov_dates we have 1/31 dt and 2/5. so i go into table1 get 1/31 and 2/5 row and copy values from 2/5 into 1/31/ as you can see the txt column value for 1/31 becametest6 since it was taking from 2/5. the same thing for the rest ofdata
i am trying to left join a selection of two or more tables. what i have found, and solved part of my problem, is that oracle left joins only the last table in the select statement ...
i.e : select * from A, B left join C on C.id = A.id wouldn't work because left join applies to B and not A.
but as my queries grow i need to make something as follows :
select * from A, B
left join C on (C.ID_A = A.ID and C.ID_B = B.ID)
[... evantually more left joins as the preceding one may go here]
this query works for DB2 but Oracle claims that "A"."ID" is an invalid identifier, while the B.ID is recognized since it's the last table stated before the "LEFT JOIN" keyword.
I am new to writing queries for an oracle database and I was giving a bit of challenge. Here's the situation. I have 3 tables I am using. 2 of the tables are being used to transpose people's names from rows to columns by account number (there are multiple people associated with each account). The last table is a pretty straight forward query. I can run each query by itself and I get the results I want. But when I try to compile the two together, I start getting a variety of errors. Below is the two queries:
Query 1 (returns about 1,500 rows):
SELECT DISTINCT CAST (EIS_DW.ACCTCOMMONLOAN.ACCOUNT as VARCHAR(20)) as ACCOUNT_NUM,
EIS_DW.ACCTCOMMONLOAN.ACCOUNT_STATUS,
EIS_DW.ACCTCOMMONLOAN.MINOR_DESCRIPTION,
EIS_DW.ACCTCOMMONLOAN.OWNER_NAME,
[code]......
Query 2 (returns about 570 rows):
SELECT ACCTNBR,
max(DECODE (rn , 1, FULLNAME)) GUARANTOR_1,
max(DECODE (rn , 2, FULLNAME)) GUARANTOR_2,
max(DECODE (rn , 3, FULLNAME)) GUARANTOR_3,
max(DECODE (rn , 4, FULLNAME)) GUARANTOR_4,
[code]....
Ideally, I want to join these two queries on ACCOUNT and ACCTNBR. I have tried working my first query into my second query, but the best I get with that, is the 570 or so accounts, not all the accounts.
I'm stuck on the CREATE VIEW part and the SELECT statement to get the output of the CREATE VIEW. We were instructed not to use AND and simply use JOIN on this exercise.
Question - For employee John Smith, give the project(s) he is working on, his department's name and the name of his division. See crows foot diagram on a separate file.
CREATE TABLE DIVISION
(div_code NUMBER(5),
emp_num NUMBER(5),
div_name VARCHAR(25),
CONSTRAINT pk_division primary key (div_code));
[code].......
SELECT - this SELECT statement is supposed to generate the output of the CREATE VIEW CODE above. SEE Crows Foot diagram attached.
i have two tables
create table tab1(
ename varchar2(10),
empid number(3) primary key);
SQL> insert into tab1 values('Ram', 101);
1 row created.
SQL> insert into tab1 values('Hari', 102);
1 row created.
SQL> insert into tab1 values('Shyam', 103);
[code]....
but i want like this
EMPID CONTACT_NO(PHONENO, MOBILENO)LOCATION
---------- -----------------------------------------
101 80123456 Banglore
101 9986234567 Banglore
102 809863728 Banglore
102 9032456578 Banglore
103 409863728 Hyderabad
[code]....
i want to display the ename,contact_no,location joining the two tables.
I was about to move some tables from one table space to another but it seems it is not possible to move partitioned tables between table spaces of different block sizes.
So far the only option I have is to export and then import back the data.
know if there is any way to move a partitioned table between table spaces of different block size?
I have a requirement to import text files which are generated from 3d modelling software xsteel where it records all geometric information and i want to import this information into oracle table.
CREATE TABLE dstv_head ( wo_no VARCHAR2(12),struct VARCHAR2(12),rev_no NUMBER,
mark VARCHAR2(12),pos VARCHAR2(12),grade VARCHAR2(12),qty NUMBER,PROFILE VARCHAR2(24),TYPE VARCHAR2(12),
len NUMBER,width_web NUMBER,width_bottom NUMBER,flange_thk NUMBER,web_thk NUMBER,radius NUMBER,kgm NUMBER,
kgm1 NUMBER,kgm2 NUMBER,bevel_plus NUMBER,bevel_minus NUMBER,holes_yn VARCHAR2(1),holes_v_yn VARCHAR2(1),
hole_x_dim NUMBER,hole_y_dim NUMBER,hole_dia NUMBER,no_of_holes NUMBER)
-- All the data which has to go under specific field for example **9005.nc1 will go into wo_no field, 1239401A will go under struct.
ST
** 9005.nc1 --WO_NO
1239401A - STRUCT
1 -REV_NO
9005 -MARK
9005 --POS
S275JR --GRADE
2 --QTY
[code]....
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 (
dt DATE
)
IS
v_sql_error VARCHAR2 (100); -- added by sanjiv
v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
[code]...
Oracle 10g, Windows XP
There is an interface table and there is an normal transcational table..interface table is being compared with normal table and if match found the result is dumped into another normal table.
I am using two cursors one is to query the interface table and in a for loop pass the results to the second cursor..The interface table is having 5000 + rows and the transcation table is having more than 3.7 millions ..and the program is taking lots of time to execute..took almost 35-45 minutes..
create table x_interface /* INterface table */ -- 5000 + rows
( name varchar2(80), addr_line1 varchar2(35), addr_line2 varchar2(35), addr_line3 varchar2(35),
addr_line4 varchar2(35), addr_line5 varchar2(35), addr_line6 varchar2(35), suffix varchar2(35),
city varchar2(15), state varchar2(10), zcode varchar2(10))
[code]....
creating an sql script that can update info from one table in dbase1 to another table in dbase2 that has the same columns and if possible insert date and time in one column when the synchronized is done?
View 3 Replies View RelatedI am trying to execute dynamic SQL in Stored Function and I don't know how to do this.
Explanation:
In the function I am calling pr_createtab is procedure which will create a physical table and return the table name in the out variable v_tbl_nm.
I need to query on this dynamic table and return the result as return result. But i am not able to do it.
Here T_web_loylty_report_table is a type.
CREATE OR REPLACE function CDW_DSS.f_ReturnTable(i_mrkt_id in number, i_cmpgn_year in number)
return T_web_loylty_report_table is
v_tbl_nm varchar2(50);
i_cntry_cd varchar2(20);
v_sql_str varchar2(32567);
[code]......
We have to load 10 million rows in a table from another table based on the multiple joins. How much tablespace size we allocate to the table and for performance point of view how much should be the SGA size.
View 11 Replies View RelatedWe have a table in the client database that has two columns - column parent and column child. The whole hierarchy of DB table dependencies is held in this table.If Report 1 is dependent on Table A and Table A in turn is dependent on two tables Table M and Table N. Table N is dependent on table Z it will appear in the db table as,
Hierarchy Table
Parent Child
Report1Table A
Table ATable M
Table ATable N
Table NTable Z
Requirement :
From the above structure, we need to build a table which will hold the complete hierarchy by breaking it into multiple columns.The o/p should look like this
-ParentChild 1Child 2 Child 3
-Report1Table ATable M
-Report1Table ATable N Table Z
Child 1, Child 2, Child 3 ....and so on are columns.The number of tables and the no of hierarchical relationships are dynamic.
SQL Statements to create hierarchy table:
create table hierarchy (parent varchar2(20), child varchar2(20));
insert into hierarchy values ('Report1','Table A');
insert into hierarchy values ('Report1','Table B');
insert into hierarchy values ('Table A','Table M');
insert into hierarchy values ('Table B','Table N');
insert into hierarchy values ('Report2','Table P');
insert into hierarchy values ('Table M','Table X');
insert into hierarchy values ('Table N','Table Y');
insert into hierarchy values ('Report X','Table Z');
Approached already tried :
1) Using indentation : select lpad(' ',20*(level-1)) || to_char(child) P from hierarchy connect_by start with parent='Report1' connect by prior child=parent;
2)Using connect by path function :
select *
from (select parent,child,level,connect_by_isleaf as leaf, sys_connect_by_path(child,'/') as path
from hierarchy start with parent='Report1'
connect by prior child =parent) a where Leaf not in (0);
Both the approaches give the information but the hierarchy data appears in a single column.Ideally we would like data at each level to appear in a different column.
what command is used to create a table by copying the structure of another table including constraints ?
View 2 Replies View Related