I want to call .bat file from oracle froms 10g.
I tried given below code but failed.
---------------------------------
declare
v1 varchar2(200);
begin
v1 := 'D:FolderLogicalbackup.bat';
HOST('cmd /c start'||v1,no_screen);
--HOST(v1);
end;
-----------------------------
The Logicalbackup.bat file contains:-
Cd d:oracleproduct10.2.0db_1in
d:
exp mw6/mw6@mw file=d:mw6ackupackupRGLHR.dmp log=d:mw6ackupackuplogRGLHR.log
How to call a batch file existing in network path through oracle forms 6i. I am using following code in Forms 6i which is supposed to FTP some .text files to a UNIX box.
Host( '\guww.netdfs.root.Global Shared Data$(LEV)Leven Shared DataLeven Shared DataPublicCOMMONMatsEmpty Bottle ReportsSchedules Preliminaryftp_files_to_ddd.bat');
When I am running this batch file ftp_files_to_ddd.bat from local directory of my PC,it is working properly.
how to call batch file from Oracle froms 10g
View 18 Replies View RelatedHow to call dll file in oracle developer 10g or 6i form
View 1 Replies View RelatedI have a .bat file in my client system,which will open a web page after executing(after double clicking on it).I want to execute the same batch file from my pl/sql block.So,after executing my pl/sql block that .bat file should execute,and it should open the same web page.
View 12 Replies View RelatedI create a form with button....whenever i click button my batch file should be run..
My batch file code :
@ECHO OFF
cd
ipconfig /all
pause
When-button-pressed trigger :
======================================
client_host('D: est_ipa.bat');
When i double click .bat file, it will get proper info.But when i call this .bat file thru form, it will show blank screen..why this .bat file not running ?
I have a Batch file(.bat) where I get the user name password ans schema name as a input . Based on that input I connect the sql and run some update query from bat file itself. Now I have issue ,when the user give wrong credintials it ask for the credintials again.
Is there any way to check the credintials of oracle and give the invalid credintial error via bat file. The sample of my Bat file is as follows.
@echo off
for /f %%i in ('sqlplus -s usename/password@db @H: est_db_connection.sql') do @set count=%%i
echo %count%
IF %count% EQU 1 ECHO ("Database connection working fine")
IF %count% NEQ 1 ECHO ("Not able to connect to database")
This is not working fine.
I need to call pdf file in oracle form 6i without specify the path of adobe acrobat reader. how to do that?
i.e.:
AppID := DDE.App_Begin(<path where you have winword.exe in your system> <path of the document you wish to open>,DDE.APP_MODE_NORMAL);
i dont need to write ths part
<path where you have winword.exe in your system>
that because in our company we have several virgins of acrobat reader and i really need to call pdf file and make the call statement public
I'm developing a new batch program retrieve data from oracle to excel.Normally i insert those data into single sheet. Is it possible if I want do this into multiple sheet.
Eg: I need to insert data base on branch category. different sheet for different branch but still in a single workbook?
I am executing multiple PL/SQL files(.sql) with single batch file. The batch file sql.bat has got 3 sub sql sub-tasks to complete once its run. The sql.bat is show below
@Echo off
CD C:Report
echo Loadin tables from text file Report.txt
sqlplus security/password <c:Reportloader_security.sql
echo Creating Security table
sqlplus security/password <c:Reportcreating_security_final.sql
echo Inserting text file Security table
sqlplus security/password <c:Reportinsert_security_final.sql
PAUSE
The sql.bat runs perfectly if I double click on the sql.bat file separately. But if I call the sql.bat from a different batch file 'Final.bat' it throws the below error.
Error
-----------
Executing SQL commands and loading file into SQL tables
Loadin tables from text file Report.txt
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
[code].....
The Final.bat file calls other bat files too. It is as show below.
CD C:ReportSecurity
echo Merging all Files
CALL merge.bat
CD C:ReportSecurity
echo Deleting old files
CALL del.bat
CD C:ReportSecurity
echo Executing SQL commands and loading file into SQL tables
CALL sql.bat
I am trying to create a batch file which will be executed with windows scheduled task. This batch file will have sqlplus script running Oracle query. I can run this query from the command prompt, no problem,
This is the sqlplus scipt to run query:
C:\Documents and Settings\testuser>sqlplus
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Nov 1 19:54:25 2010
Copyright © 1982, 2007, Oracle. All Rights Reserved.
Enter user-name: TEST1
Enter password:
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
TEST1@DB> spool testuserfile
here goes my query
TEST1@DB> spool off
TEST1@DB> exit
Disconnected from Oracle Database 10g Release 10.2.0.4.0 - Production
C:\Documents and Settings\testuser>
How do I put this in a batch file. I was able to figure how to logon, but I get stuck at the spool command. My batch file starts like this:
cd C:\Documents and Settings\testuser
sqlplus TEST1/Password
I am trying to create a .bat file where I need to take inputs for below variables
DNAME
UNAME
PSWD
So I have done like this
SET /p DNAME="Enter the Database Name "
SET /p UName="Enter the Username "
SET /p Pswd="Enter the Password "
Now I need to validate whether I am able to establish the connection
sqlpus -s "%UName%/%Pswd%@%DNAME%"
if the above connection is valid one then perform certain action else need to echo user that Access is denied.
(ex: I am trying to say if cond is valid
stmt-1
else
echo message to user. )
exp system/abc@c file=c:dmp_%date%.dmp log=c:log.txt owner=xyz
I run this script through batch file its working.Problem is dump file showing with this format C:dmp_wed.dmp.I want to date format like that C:dmp_18052011.dmp.
for date formatting.How I can add date format in a batch file.
I am running Oracle Database 10g R2 on windows 2003, I want to create a batch file to check if the database is idle or not, and if it is idle shut it down and start it up.
View 13 Replies View RelatedI have a particular sql code which works perfectly fine on sql developer. But if I run the same sql code through a batch file it does not get executed. It does not throw an error too.
SQL code - clean_tables.sql
begin
execute immediate 'drop table external_tables';
execute immediate 'drop table security';
exception
when others then
null;
end;
Batch file - Clean.bat
set ORACLE_SID=orcl
set ORACLE_HOME=C:oracleproduct11.2.0dbhome_1
set PATH=C:oracleproduct11.2.0dbhome_1BIN
sqlplus security/password@orcl <c:Reportclean_tables.sql
pause
I have a batch file Menu.bat which should pass accept the input parameters from the end users and pass the entered values to a different batch file.
After entering option 2 the user should be prompted with an option to enter the path. E.g. /shared/folder.
Now '/shared/folder' should be passed to a different batch file named R.bat
Below is the Menu.bat file.
@echo off
color 00
title Security Audit Adaptor
:main
cls
echo //MAIN MENU\
echo.
echo 1. Got to Google
echo 2. Enter path
[code].......
From within a DOS batch file I make the following call:
sqlplus [User]/[password]@[server] @batch_script.sql [Server] [User]
Within the file batch_script.sql I have the following lines:
spool output_batch.lst
connect &&2/[password]@&&1;
@SomeOtherFile.sql
I want to change the last line to something like this:
if &&1 = 'Something' then
@SomeOtherFile1.sql
else
@SomeOtherFile2.sql
end if;
I get the following result
SQL> if &&1 = "something" then
SP2-0734: unknown command beginning "if &&1 = "..." - rest of line ignored.
I took a shot at using the "If" statement and missed.
execute a BATCH File through PLSQL.
BEGIN
dbms_scheduler.Create_schedule(schedule_name => 'RMAN_TICKER_STARTING',
repeat_interval => 'FREQ=DAILY;BYHOUR=9; BYMINUTE=15,30,45,59',
comments
=> 'schedule to run daily');
dbms_scheduler.Create_program (program_name => 'TICKER_PROGRAME',
[code]....
It was created successfully, but when I execute, it shows the error message.
BEGIN
dbms_scheduler.Run_job ('RMAN_TICKER_JOB', TRUE);
END;
begin
dbms_scheduler.run_job (
'RMAN_TICKER_JOB',TRUE);
end;
Error at line 1
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 2
[code]....
But I have the CMD file in the location - "F:FEEDLGRTOOLSfeedlgr.cmd".
i get flat file and i have set up a control M job so that it runs at a particular time.
initially my control file was as below:
LOAD DATA
INFILE 'DFILEabcd.dat'
BADFILE 'BDabcd.bad'
REPLACE
INTO TABLE abcd_table
(A position(01:09) CHAR,
B position(11:12) CHAR,
C position(14:33) CHAR,
D position(37:50) char)
this was working fine. control M did not send FAIL message.but later i had to change the ctl file due to requirement. i had to add a when clause.
my code after modification is:
INFILE 'DFILEabcd.dat'
BADFILE 'BDabcd.bad'
REPLACE
INTO TABLE abcd_table
when A<>'10'
(A position(01:09) CHAR,
B position(11:12) CHAR,
C position(14:33) CHAR,
D position(37:50)
now the control M is sending an erro message after it runs the job. error is Return 5. thats all it gives.
i think it is due to errorlevel 1. in log file it says zero records inserted due to data error. then what is causing control M to send fail message??
sqlloader is loading all the required records correctly.
I am trying to create a silent install as part of a batch file that does other things after. I'm running into the following issues
1) I need the batch file to wait until the install is done to continue. Trouble is that running setup with a response file opens up a new windows to run the install. I tried the wait command but doesn't work right either
2) Same issue with DBCA and a response file.
Any way to run the silent installs and have the batch file wait until the install is done and then continue? The less user intervention required, the better.
I have countries, sites, states tables (total 3) in database (i have user id and password to connect to this database).
every week i need to extract data from these tables into excel files and i need to save those in shared drive for team use.
Currently i am connecting to database every time running sql query and manually exporting that latest data to excel and saving that as excel files in (G: eamcommon) folder with specific name.
output format should be :
excel (.xls)
file names should - countries.xls,sites.xls,states.xls
server name : ap21
output location : G: eamcommon ( G is shared drive).
i heard that we could create batch file to do this task and also we could use oracle procedure to do this task. but not sure which one is the best option.
i have this function
create function xxx_sal (p_number in number)
return number is
v_sal number;
begin
select sum(sal)
into v_sal
from emp
where empno = p_number;
return v_sal;
end;
how can called it in oracle forms
I am having Oracle 9.2.0.1.0 client in my PC and jdk version is 1.6
I had configured below tools in my PC. (windows 2000) I am having Oracle 9.2 with Oracle Developer Suite 10g (10.1.2.0.2) which contains Oracle JDeveloper 10g (10.1.2.1) also.
How to call a java function from Oracle forms? code samples and how to integrate those thing?
I've created a database package which is having record type and one procedure. I want to execute or call this package from oracle 6i form. How to do this.
View 7 Replies View Relatedwhen i am calling stored procedure with input and output parameters from batch file .. I am getting the following message ..
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Oct 4 11:48:51 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options 14
code which i have written ...
DEClARE
RETCODE NUMBER;
RETMSG VARCHAR2(200);
EXEC SP_SELCT_EMPLOYEE_DATA(277080,'EMPNAME ','EMAIL@EMAIL.COM', 9028045686,111333,25000,'PUNE',35,RETCODE ,RETMSG );
EXIT
Procedure Name :
PROCEDURE SP_SELCT_EMPLOYEE_DATA (
-- A_EMPLOYEE_ID IN VARCHAR2,
--A_JOB_ID IN EMPLOYEES.JOB_ID%TYPE,
P_EMPLOYEE_ID IN EMPLOYEES.EMPLOYEE_ID%TYPE,
P_EMPLOYEE_NAME IN EMPLOYEES.EMPLOYEE_NAME%TYPE,
P_EMAIL IN EMPLOYEES.EMAIL%TYPE,
[code]....
I need to fire the KEY-DUPREC trigger as I click on the key combination Shift+P therefore; I added the following line of code in the frmweb.res file.
80 : 1 : "Shift+P" : 64 : "Duplicate Record"
It worked iff no error was raised. So, if I have a raise form trigger failure in the KEY-DUPREC trigger, a capital P will appear in the text field that called the trigger.
I've one package in which one record is created. associative array is craeted on that record.create procedure on associative array.using forms 6i i want to call this procedue.(package_name.procedure_name(paramerters)). but my problem is what paramerter shuld i provide to excute the procedure?like PK_EXCEL_TO_DB.PR_DO_INSERT(LIST_ROUTE); but i am getting error while doing this.
CREATE OR REPLACE PACKAGE PK_EXCEL_TO_DB IS
TYPE ROUTE IS RECORD (COL_ROUTE VARCHAR2(255), VAL_ROUTE VARCHAR2(4000));
TYPE LIST_ROUTE IS TABLE OF ROUTE;
PROCEDURE PR_DO_INSERT(i_lData IN LIST_ROUTE);
[code]...
How to call Oracle Form using a Stored Procedure?
Under
create or replace procedure ........
Begin
.......
End
Inside such procedures , is it possible to call a form ?
I had a query related to call_form function in forms 6i.How can I call a particular form via static ip(outside LAN),but the actual forms are stored in a server called "MAIN_SERVER" which resides in internal LAN domain.That is I have stored location of all my forms path(fmx)in my database table called "FORMS_LOCATION" in the MAIN_SERVER system under the directory "FORMS".From here only users can call all the forms by call_form function.To understand see the example below,
In the table FORMS_LOCATION,there is a column call "forms_path" which holds the value like,
//MAIN_SERVER/FORMS/EMPLOYEE.FMX;
(server_name,foldername,form_name)
In application the call_form just uses the column "forms_path" to call the form.like CALL_FORM("forms_path",no_hide) this statement will call the form from the main_server.
Here 1.MAIN_SERVER is the name of the server system where forms fmx is actually stored under the folder name "FORMS".When the users access the particular form the call_form function call the form from the MAIN_SERVER.Now there are no problem inside the LAN.Incase if I access the database and call the form outside LAN via internet through STATIC IP what happened was database was connected but call_form function failed and not calling the form because which does not know the MAIN_SERVER/FORMS/ path.
Because my user want to access the form outside lan via internet,so I tried replacing the above statement like //192.54.67.98/FORMS/EMPLOYEE.FMX' with static ip in the prefix instead of local server called MAIN_SERVER.But its not working again.How can I do this?.
I'm working on a Self assessment project regarding our tax returns. Currently, this is how it works - a return lodged generates a return number, but is batched later. In the change proposed, they want the same process whereby a return is generated still, but at a count of 10 returns generated on the same screen, a batch is to be created and these 10 returns will have to be added to that batch. We are on Oracle 10G and work with Forms, Reports 10G and TOAD/SQL Plus as tools so I was thinking of changing it on Post-Query but suggestions are to add on to System Parameter table.
View 3 Replies View Related